[U-Boot] Issues in U-BOOT for OMAPL137

[Nick Thompson]

Please don't top post, it really breaks up the flow of the conversation
when people look at it later on. And please keep the list on CC.

On 13/05/11 06:31, shilpa jadav wrote:
> Hi,
> 
>    I tried latest U-BOOT release from
> git://git.denx.de/u-boot.git or http://git.denx.de/u-boot.git
> 
> I am unable to compile it, i think da830/omapl137 support is not their in
> u-boot. I got the error as mentioned below when i give the command
> 
> u-boot# make ARCH=arm CROSS_COMPILE=arm-none-linux-gnueabi-
> da830_omapl137_config

The target you are after is da830evm_config. I know its there because
I'm the board maintainer ;-)

$ grep da830evm boards.cfg
da830evm                     arm         arm926ejs   da8xxevm            davinci        davinci

da830 is the name fo the omap-l137 which is not an OMAP but a Davinci
device. omap-l137 is its TI marketing name.

Nick.

> 
> I get the error as:---
> 
> awk '(NF && $1 !~ /^#/) { print $1 ": " $1 "_config; $(MAKE)" }' boards.cfg
>> .boards.depend
> make: *** No rule to make target `da830_omapl137_config'.  Stop.
> make: *** [da830_omapl137_config] Error 1
> 
> Can you tell the release which is supporting da830/omapl137 with USB
> support.
> 
> Thanks,
> Shilpa
> 
> 
> On Thu, May 12, 2011 at 2:30 PM, Nick Thompson <nick.thompson at ge.com> wrote:
> 
>> On 11/05/11 10:15, shilpa jadav wrote:
>>> Hi ,
>>> When i am trying to compile u-boot for omapL137 by issuing the following
>>> command
>>> make da830_omapl137_evm_config CROSS_COMPILE=arm-none-linux-gnueabi-
>>>
>>> Our goal is to get USB up on the uboot . We are trying to boot OMAPL137
>> Evm
>>> using USB mass storage device(Pen drive)
>>> I have added the following macros in the /include/configs/da830_evm.h
>>> (followed the instructions from CHANGELOG file)
>>>  #define CONFIG_CMD_USB          1
>>>     #define CONFIG_USB_STORAGE      1
>>>     #define CONFIG_USB_EHCI
>>>     #define CONFIG_USB_EHCI_IXP4XX      1
>>>     #define CONFIG_EHCI_IS_TDI  1
>>>     #define CONFIG_EHCI_DESC_BIG_ENDIAN     1
>>>     #define CONFIG_EHCI_MMIO_BIG_ENDIAN     1
>>>     #define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 1
>>>     #define CONFIG_LEGACY_USB_INIT_SEQ      1
>>>
>>> This is the error i am seeing consistently.
>>>
>>> make[1]: Leaving directory
>>>
>> `/home/dataway/linux_bkup/kalyan/omapl137/DaVinci-PSP-SDK-03.20.00.08/src/u-boot/uboot-03.20.00.08/drivers/usb/musb'
>>> make -C drivers/usb/host/
>>> make[1]: Entering directory
>>>
>> `/home/dataway/linux_bkup/kalyan/omapl137/DaVinci-PSP-SDK-03.20.00.08/src/u-boot/uboot-03.20.00.08/drivers/usb/host'
>>> make[1]: *** No rule to make target `.depend', needed by `libusb_host.a'.
>>> Stop.
>>> make[1]: Leaving directory
>>>
>> `/home/dataway/linux_bkup/kalyan/omapl137/DaVinci-PSP-SDK-03.20.00.08/src/u-boot/uboot-03.20.00.08/drivers/usb/host'
>>> make: *** [drivers/usb/host/libusb_host.a] Error 2
>>>
>>> Please help us solving this issue as this is very critical for our
>>> development
>>
>> This u-boot version (from the DaVinci-PSP) is quite old now (2009.08)
>> and, I believe, its da830/l137 code was never added to the community
>> tree: community support started in Nov 2009 and USB support was added
>> in Dec 2009. As such it can't be supported here.
>>
>> As mentioned da830 EVM is supported by the community tree and I would
>> encourage you to used the latest release from
>> git://git.denx.de/u-boot.git or http://git.denx.de/u-boot.git
>>
>> You can download snapshots, with a browser, from:
>> http://git.denx.de/?p=u-boot.git;a=summary
>>
>> Nick.
>>
>