[U-Boot] [PATCH v2 3/3] arm: at91: ether: Prepare for mach-types.h changes

Igor Grinberg grinberg at compulab.co.il
Mon May 16 15:31:07 CEST 2011


ping!


It has been two weeks...


On 05/02/11 15:49, Igor Grinberg wrote:

> at91 ethernet module used machine_is_cbs337() macro for board specific
> Linux compatibility issue.
> Remove this, as no such board exist in current U-Boot tree.
>
> Signed-off-by: Igor Grinberg <grinberg at compulab.co.il>
> ---
>  arch/arm/cpu/arm920t/at91rm9200/ether.c |   18 +++---------------
>  1 files changed, 3 insertions(+), 15 deletions(-)
>
> diff --git a/arch/arm/cpu/arm920t/at91rm9200/ether.c b/arch/arm/cpu/arm920t/at91rm9200/ether.c
> index e1cdeba..2015e13 100644
> --- a/arch/arm/cpu/arm920t/at91rm9200/ether.c
> +++ b/arch/arm/cpu/arm920t/at91rm9200/ether.c
> @@ -195,21 +195,9 @@ int eth_init (bd_t * bd)
>  
>  	eth_getenv_enetaddr("ethaddr", enetaddr);
>  
> -	/* The CSB337 originally used a version of the MicroMonitor bootloader
> -	 * which saved Ethernet addresses in the "wrong" order.  Operating
> -	 * systems (like Linux) know this, and apply a workaround.  Replicate
> -	 * that MicroMonitor behavior so we avoid needing to make such OS code
> -	 * care about which bootloader was used.
> -	 */
> -	if (machine_is_csb337()) {
> -		p_mac->EMAC_SA2H = (enetaddr[0] <<  8) | (enetaddr[1]);
> -		p_mac->EMAC_SA2L = (enetaddr[2] << 24) | (enetaddr[3] << 16)
> -				 | (enetaddr[4] <<  8) | (enetaddr[5]);
> -	} else {
> -		p_mac->EMAC_SA2L = (enetaddr[3] << 24) | (enetaddr[2] << 16)
> -				 | (enetaddr[1] <<  8) | (enetaddr[0]);
> -		p_mac->EMAC_SA2H = (enetaddr[5] <<  8) | (enetaddr[4]);
> -	}
> +	p_mac->EMAC_SA2L = (enetaddr[3] << 24) | (enetaddr[2] << 16)
> +			 | (enetaddr[1] <<  8) | (enetaddr[0]);
> +	p_mac->EMAC_SA2H = (enetaddr[5] <<  8) | (enetaddr[4]);
>  
>  	p_mac->EMAC_RBQP = (long) (&rbfdt[0]);
>  	p_mac->EMAC_RSR &= ~(AT91C_EMAC_RSR_OVR | AT91C_EMAC_REC | AT91C_EMAC_BNA);

-- 
Regards,
Igor.



More information about the U-Boot mailing list