[U-Boot] [PATCH 2/2] mx53smd: Configure two banks of DDR

Fabio Estevam fabio.estevam at freescale.com
Thu May 19 15:44:58 CEST 2011


Signed-off-by: Fabio Estevam <fabio.estevam at freescale.com>
---
 board/freescale/mx53smd/mx53smd.c |   18 +++++++++++++++---
 include/configs/mx53smd.h         |    3 +++
 2 files changed, 18 insertions(+), 3 deletions(-)

diff --git a/board/freescale/mx53smd/mx53smd.c b/board/freescale/mx53smd/mx53smd.c
index 2d158f7..f3c433f 100644
--- a/board/freescale/mx53smd/mx53smd.c
+++ b/board/freescale/mx53smd/mx53smd.c
@@ -42,11 +42,23 @@ u32 get_board_rev(void)
 
 int dram_init(void)
 {
-	/* dram_init must store complete ramsize in gd->ram_size */
-	gd->ram_size = get_ram_size((volatile void *)CONFIG_SYS_SDRAM_BASE,
-				PHYS_SDRAM_1_SIZE);
+	u32 size1, size2;
+
+	size1 = get_ram_size((volatile void *)PHYS_SDRAM_1, PHYS_SDRAM_1_SIZE);
+	size2 = get_ram_size((volatile void *)PHYS_SDRAM_2, PHYS_SDRAM_2_SIZE);
+
+	gd->ram_size = size1 + size2;
+
 	return 0;
 }
+void dram_init_banksize(void)
+{
+	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
+	gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
+
+	gd->bd->bi_dram[1].start = PHYS_SDRAM_2;
+	gd->bd->bi_dram[1].size = PHYS_SDRAM_2_SIZE;
+}
 
 static void setup_iomux_uart(void)
 {
diff --git a/include/configs/mx53smd.h b/include/configs/mx53smd.h
index e64ff98..65d5e05 100644
--- a/include/configs/mx53smd.h
+++ b/include/configs/mx53smd.h
@@ -165,6 +165,9 @@
 #define CONFIG_NR_DRAM_BANKS	2
 #define PHYS_SDRAM_1		CSD0_BASE_ADDR
 #define PHYS_SDRAM_1_SIZE	(512 * 1024 * 1024)
+#define PHYS_SDRAM_2		CSD1_BASE_ADDR
+#define PHYS_SDRAM_2_SIZE	(512 * 1024 * 1024)
+#define PHYS_SDRAM_SIZE         (PHYS_SDRAM_1_SIZE + PHYS_SDRAM_2_SIZE)
 
 #define CONFIG_SYS_SDRAM_BASE		(PHYS_SDRAM_1)
 #define CONFIG_SYS_INIT_RAM_ADDR	(IRAM_BASE_ADDR)
-- 
1.6.0.4




More information about the U-Boot mailing list