[U-Boot] 8308 processor continously reboots with u-boot-2009.11-rc1
Sharath Kurudi
skurudi at gmail.com
Fri May 20 06:10:36 CEST 2011
Hi,
I am trying to port u-boot-2009.11-rc1 on 8308 processor. I get the
following prints on the terminal and the processor continuously resets
Prints on the console
PrivateBuild:sharath (May 19 2011 - 23:18:20) MPC83XX
Reset Status: Check Stop, External/Internal Soft, External/Internal Hard
Arbiter Event Status:
Event Address: 0x00000001
Event Type: 0x0 = Address Time Out
Master ID: 0x00 = e300 Core Data Transaction
Transfer Size: 0x9 = 1 bytes
Transfer Type: 0x0a = Single-beat or Burst read
Mem Clk : 0xfe502a8
CPU: e300c3, MPC8308, Rev: 1.0 at 266.667 MHz, CSB: 133.333 MHz
Could anybody help?
Thanks
Sharath
More information about the U-Boot
mailing list