[U-Boot] [GIT PULL] Pull request: u-boot-imx
Stefano Babic
sbabic at denx.de
Fri May 20 17:58:13 CEST 2011
Hi Albert,
please pull from u-boot-imx.
The following changes since commit 7a82c208143bbc774ffcb4e53239410f867a0794:
Prepare v2011.06-rc1 (2011-05-19 22:23:50 +0200)
are available in the git repository at:
git://www.denx.de/git/u-boot-imx.git master
Fabio Estevam (6):
mx31pdk: Clean up mx31pdk.h file
MX53: Add initial support for MX53SMD board.
MX51: vision: Let video mode struct be independant of watchdog.
MX51: vision2: Fix build for vision2 board.
MX53: Handle silicon revision 2.1 case
MX53: Remove CONFIG_SYS_BOOTMAPSZ from mx53 config files.
Jason Liu (2):
MX53: support for freescale MX53LOCO board
mx5: board: code clean up for checkboard code
Shawn Guo (2):
mx5: Remove unnecessary CONFIG_SYS_BOOTMAPSZ definition
mx5: Fix CONFIG_OF_LIBFDT redefined warning
Stefano Babic (3):
MX31: Make get_reset_cause() static and drop unreachable code
MX5: drop config.mk from efikamx board
MX31: drop warnings due to missing prototype for mxc_watchdog_reset()
MAINTAINERS | 2 +
arch/arm/cpu/arm1136/mx31/generic.c | 6 +-
arch/arm/cpu/armv7/mx5/soc.c | 10 +-
arch/arm/include/asm/arch-mx31/clock.h | 1 +
board/efikamx/efikamx.c | 42 +---
board/freescale/mx51evk/mx51evk.c | 36 +---
board/freescale/mx53evk/mx53evk.c | 21 +--
.../config.mk => freescale/mx53loco/Makefile} | 36 ++-
board/freescale/mx53loco/imximage.cfg | 96 ++++++
board/freescale/mx53loco/mx53loco.c | 302
++++++++++++++++++++
.../config.mk => freescale/mx53smd/Makefile} | 35 ++-
board/freescale/mx53smd/imximage.cfg | 96 ++++++
board/freescale/mx53smd/mx53smd.c | 229 +++++++++++++++
board/ttcontrol/vision2/vision2.c | 47 +---
boards.cfg | 6 +-
include/configs/mx31pdk.h | 32 +-
include/configs/mx51evk.h | 3 -
include/configs/mx53evk.h | 3 -
include/configs/mx53loco.h | 185 ++++++++++++
include/configs/mx53smd.h | 191 ++++++++++++
include/configs/vision2.h | 1 +
21 files changed, 1191 insertions(+), 189 deletions(-)
rename board/{efikamx/config.mk => freescale/mx53loco/Makefile} (51%)
create mode 100644 board/freescale/mx53loco/imximage.cfg
create mode 100644 board/freescale/mx53loco/mx53loco.c
rename board/{ttcontrol/vision2/config.mk =>
freescale/mx53smd/Makefile} (50%)
create mode 100644 board/freescale/mx53smd/imximage.cfg
create mode 100644 board/freescale/mx53smd/mx53smd.c
create mode 100644 include/configs/mx53loco.h
create mode 100644 include/configs/mx53smd.h
Best regards,
Stefano
--
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office at denx.de
=====================================================================
More information about the U-Boot
mailing list