[U-Boot] [PATCH 3/3] omap3_beagle: enable EHCI and USB storage.

Alexander Holler holler at ahsoftware.de
Fri May 27 13:24:09 CEST 2011


Am 27.05.2011 11:40, schrieb Christian Spielberger:
> On 05/27/2011 09:34 AM, Alexander Holler wrote:
>> Am 26.05.2011 17:41, schrieb Alexander Holler:
>>> Am 26.05.2011 13:30, schrieb Christian Spielberger:
>> ...
>>> But even than USB doesn't seem to work on a BeagleBoard XM (at least
>>> some people told me so). I don't have a XM, so I can't help more there.
>>> It might be a problem with (a needed reset of) the HUB which is included
>>> on the XM, I don't know.
>>
>> I forgot to mention that the PHY reset on the XM works inverse than for
>> the BeagleBoard w/o XM. Haven't known this, when I've written that patch.
>>
>> Regards,
>>
>> Alexander
>>
>>
>
> We checked what you mentioned but found that the PHY reset is identical
> between XM and C4. The reset signal is ok. That is what we saw on an
> oscilloscope.
>
> We also found that the USB2HS_CLK initialization does not work, also
> with the oscilloscope. I am going to check the CLK initialization
> sequence in beagle.c/ehci_hcd_init.

It seems the PHY reset was only inverted for XM-A and XM-B and got again 
the same as in the C4 with XM-C.

I've looked up in my mailbox and found a quick and dirty hack from Koen 
Kooi with which he comes at least through the initialization on the XM:

http://dominion.thruhere.net/koen/angstrom/beagleboard/uboot/hacks.diff

But I think he stopped working on that topic, waiting for feedback from 
other people.

You might ask on the mailing list for the BeagleBoard about the status.

Regards,

Alexander


More information about the U-Boot mailing list