[U-Boot] [PATCH 03/14] davinci_emac: use internal addresses in buffer descriptors

[Ilya Yanok]

On AM35xx CPPI RAM had different addresses when accessed from the CPU
and from the EMAC. We need to account this to deal with the buffer
descriptors correctly.

Signed-off-by: Ilya Yanok <yanok at emcraft.com>
---
 drivers/net/davinci_emac.c |   39 ++++++++++++++++++++++++++++++---------
 1 files changed, 30 insertions(+), 9 deletions(-)

diff --git a/drivers/net/davinci_emac.c b/drivers/net/davinci_emac.c
index f70040b..b2a6076 100644
--- a/drivers/net/davinci_emac.c
+++ b/drivers/net/davinci_emac.c
@@ -48,6 +48,27 @@
 unsigned int	emac_dbg = 0;
 #define debug_emac(fmt,args...)	if (emac_dbg) printf(fmt,##args)
 
+#ifdef EMAC_HW_RAM_ADDR
+static inline unsigned long BD_TO_HW(unsigned long x)
+{
+	if (x == 0)
+		return 0;
+
+	return x - EMAC_WRAPPER_RAM_ADDR + EMAC_HW_RAM_ADDR;
+}
+
+static inline unsigned long HW_TO_BD(unsigned long x)
+{
+	if (x == 0)
+		return 0;
+
+	return x - EMAC_HW_RAM_ADDR + EMAC_WRAPPER_RAM_ADDR;
+}
+#else
+#define BD_TO_HW(x)	(x)
+#define HW_TO_BD(x)	(x)
+#endif
+
 #ifdef DAVINCI_EMAC_GIG_ENABLE
 #define emac_gigabit_enable(phy_addr)	davinci_eth_gigabit_enable(phy_addr)
 #else
@@ -435,7 +456,7 @@ static int davinci_eth_open(struct eth_device *dev, bd_t *bis)
 	/* Create RX queue and set receive process in place */
 	emac_rx_active_head = emac_rx_desc;
 	for (cnt = 0; cnt < EMAC_MAX_RX_BUFFERS; cnt++) {
-		rx_desc->next = (u_int32_t)(rx_desc + 1);
+		rx_desc->next = BD_TO_HW((u_int32_t)(rx_desc + 1));
 		rx_desc->buffer = &emac_rx_buffers[cnt * (EMAC_MAX_ETHERNET_PKT_SIZE + EMAC_PKT_ALIGN)];
 		rx_desc->buff_off_len = EMAC_MAX_ETHERNET_PKT_SIZE;
 		rx_desc->pkt_flag_len = EMAC_CPPI_OWNERSHIP_BIT;
@@ -488,7 +509,7 @@ static int davinci_eth_open(struct eth_device *dev, bd_t *bis)
 	emac_gigabit_enable(active_phy_addr[index]);
 
 	/* Start receive process */
-	writel((u_int32_t)emac_rx_desc, &adap_emac->RX0HDP);
+	writel(BD_TO_HW((u_int32_t)emac_rx_desc), &adap_emac->RX0HDP);
 
 	debug_emac("- emac_open\n");
 
@@ -606,7 +627,7 @@ static int davinci_eth_send_packet (struct eth_device *dev,
 				      EMAC_CPPI_OWNERSHIP_BIT |
 				      EMAC_CPPI_EOP_BIT);
 	/* Send the packet */
-	writel((unsigned long)emac_tx_desc, &adap_emac->TX0HDP);
+	writel(BD_TO_HW((unsigned long)emac_tx_desc), &adap_emac->TX0HDP);
 
 	/* Wait for packet to complete or link down */
 	while (1) {
@@ -650,14 +671,14 @@ static int davinci_eth_rcv_packet (struct eth_device *dev)
 		}
 
 		/* Ack received packet descriptor */
-		writel((unsigned long)rx_curr_desc, &adap_emac->RX0CP);
+		writel(BD_TO_HW((ulong)rx_curr_desc), &adap_emac->RX0CP);
 		curr_desc = rx_curr_desc;
 		emac_rx_active_head =
-			(volatile emac_desc *) rx_curr_desc->next;
+			(volatile emac_desc *) (HW_TO_BD(rx_curr_desc->next));
 
 		if (status & EMAC_CPPI_EOQ_BIT) {
 			if (emac_rx_active_head) {
-				writel((unsigned long)emac_rx_active_head,
+				writel(BD_TO_HW((ulong)emac_rx_active_head),
 				       &adap_emac->RX0HDP);
 			} else {
 				emac_rx_queue_active = 0;
@@ -675,7 +696,7 @@ static int davinci_eth_rcv_packet (struct eth_device *dev)
 			emac_rx_active_head = curr_desc;
 			emac_rx_active_tail = curr_desc;
 			if (emac_rx_queue_active != 0) {
-				writel((unsigned long)emac_rx_active_head,
+				writel(BD_TO_HW((ulong)emac_rx_active_head),
 				       &adap_emac->RX0HDP);
 				printf ("INFO: emac_rcv_pkt: active queue head = 0, HDP fired\n");
 				emac_rx_queue_active = 1;
@@ -683,10 +704,10 @@ static int davinci_eth_rcv_packet (struct eth_device *dev)
 		} else {
 			tail_desc = emac_rx_active_tail;
 			emac_rx_active_tail = curr_desc;
-			tail_desc->next = (unsigned int) curr_desc;
+			tail_desc->next = BD_TO_HW((ulong) curr_desc);
 			status = tail_desc->pkt_flag_len;
 			if (status & EMAC_CPPI_EOQ_BIT) {
-				writel((unsigned long)curr_desc,
+				writel(BD_TO_HW((ulong)curr_desc),
 				       &adap_emac->RX0HDP);
 				status &= ~EMAC_CPPI_EOQ_BIT;
 				tail_desc->pkt_flag_len = status;
-- 
1.7.6.4