[U-Boot] [PATCH v7 4/4] usb: add USB support for Efika
Igor Grinberg
grinberg at compulab.co.il
Wed Nov 2 10:54:35 CET 2011
Hi Jana,
On 11/01/11 21:24, Jana Rapava wrote:
> This commit adds USB support for EfikaMX and EfikaSB.
>
> Signed-off-by: Jana Rapava <fermata7 at gmail.com>
> Signed-off-by: Marek Vasut <marek.vasut at gmail.com>
> Cc: Remy Bohmer <linux at bohmer.net>
> Cc: Stefano Babic <sbabic at denx.de>
>
> Acked-by: Marek Vasut <marek.vasut at gmail.com>
> ---
> Changes for v2:
> - introduce temporary variable in ulpi_write
> - whitespace changes
> Changes for v3:
> - add protection against multiple inclusion of efika.h
> Changes for v4:
> - rename multiple inclusion protection macro in efika.h
> Changes for v5:
> - fix unterminated #ifndef in efika.h
> Changes for v6:
> - add Acked-by
> - no changes
> Changes for v7:
> - use ULPI-related definitions from ./include/usb/ulpi.h
This means that the patch here [1] is a prerequisite, right?
It is worth stating.
[1] http://patchwork.ozlabs.org/patch/123119/
>
> board/efikamx/Makefile | 3 +
> board/efikamx/efika.h | 35 ++++
> board/efikamx/efikamx-usb.c | 424 +++++++++++++++++++++++++++++++++++++++++++
> board/efikamx/efikamx.c | 3 +
> include/configs/efikamx.h | 16 ++
> 5 files changed, 481 insertions(+), 0 deletions(-)
> create mode 100644 board/efikamx/efika.h
> create mode 100644 board/efikamx/efikamx-usb.c
>
> diff --git a/board/efikamx/Makefile b/board/efikamx/Makefile
> index ee4a16e..860e4d2 100644
> --- a/board/efikamx/Makefile
> +++ b/board/efikamx/Makefile
> @@ -28,6 +28,9 @@ include $(TOPDIR)/config.mk
> LIB = $(obj)lib$(BOARD).o
>
> COBJS := efikamx.o
> +ifdef CONFIG_CMD_USB
> +COBJS += efikamx-usb.o
> +endif
>
> SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
> OBJS := $(addprefix $(obj),$(COBJS))
> diff --git a/board/efikamx/efika.h b/board/efikamx/efika.h
> new file mode 100644
> index 0000000..fec9ee0
> --- /dev/null
> +++ b/board/efikamx/efika.h
> @@ -0,0 +1,35 @@
> +/*
> + * Copyright (C) 2011 Jana Rapava <fermata7 at gmail.com>
> + *
> + * See file CREDITS for list of people who contributed to this
> + * project.
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of
> + * the License, or (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
> + * MA 02111-1307 USA
> + */
> +
> +#ifndef __BOARD_EFIKAMX_EFIKA_H__
> +#define __BOARD_EFIKAMX_EFIKA_H__
> +
> +/*
> + * EHCI USB
> + */
> +#ifdef CONFIG_CMD_USB
> +void setup_iomux_usb(void);
> +#else
> +static inline void setup_iomux_usb(void) { }
> +#endif
> +
> +#endif /* __BOARD_EFIKAMX_EFIKA_H__ */
> diff --git a/board/efikamx/efikamx-usb.c b/board/efikamx/efikamx-usb.c
> new file mode 100644
> index 0000000..3b42256
> --- /dev/null
> +++ b/board/efikamx/efikamx-usb.c
> @@ -0,0 +1,424 @@
> +/*
> + * Copyright (C) 2011 Marek Vasut <marek.vasut at gmail.com>
> + * Copyright (C) 2011 Jana Rapava <fermata7 at gmail.com>
> + *
> + * See file CREDITS for list of people who contributed to this
> + * project.
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of
> + * the License, or (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
> + * MA 02111-1307 USA
> + */
> +
> +#include <common.h>
> +#include <usb.h>
> +#include <asm/io.h>
> +#include <asm/arch/imx-regs.h>
> +#include <asm/arch/mx5x_pins.h>
> +#include <asm/arch/iomux.h>
> +#include <asm/gpio.h>
> +#include <usb/ehci-fsl.h>
> +#include <errno.h>
> +#include <watchdog.h>
> +
> +#include <usb/ehci.h>
> +#include <usb/ehci-core.h>
> +#include <usb/ulpi.h>
> +
> +/*
> + * Configure the USB H1 and USB H2 IOMUX.
> + */
> +#define USB_PAD_CONFIG (PAD_CTL_PKE_ENABLE | PAD_CTL_SRE_FAST | \
> + PAD_CTL_DRV_HIGH | PAD_CTL_100K_PU | \
> + PAD_CTL_HYS_ENABLE | PAD_CTL_PUE_PULL)
> +void setup_iomux_usb(void)
> +{
> + /*
> + * Configure USBH1 pads
> + */
> + mxc_request_iomux(MX51_PIN_USBH1_STP, IOMUX_CONFIG_ALT0);
> + mxc_iomux_set_pad(MX51_PIN_USBH1_STP, USB_PAD_CONFIG);
> + mxc_request_iomux(MX51_PIN_USBH1_CLK, IOMUX_CONFIG_ALT0);
> + mxc_iomux_set_pad(MX51_PIN_USBH1_CLK, USB_PAD_CONFIG);
> + mxc_request_iomux(MX51_PIN_USBH1_DIR, IOMUX_CONFIG_ALT0);
> + mxc_iomux_set_pad(MX51_PIN_USBH1_DIR, USB_PAD_CONFIG);
> + mxc_request_iomux(MX51_PIN_USBH1_NXT, IOMUX_CONFIG_ALT0);
> + mxc_iomux_set_pad(MX51_PIN_USBH1_NXT, USB_PAD_CONFIG);
> +
> + mxc_request_iomux(MX51_PIN_USBH1_DATA0, IOMUX_CONFIG_ALT0);
> + mxc_iomux_set_pad(MX51_PIN_USBH1_DATA0, USB_PAD_CONFIG);
> + mxc_request_iomux(MX51_PIN_USBH1_DATA1, IOMUX_CONFIG_ALT0);
> + mxc_iomux_set_pad(MX51_PIN_USBH1_DATA1, USB_PAD_CONFIG);
> + mxc_request_iomux(MX51_PIN_USBH1_DATA2, IOMUX_CONFIG_ALT0);
> + mxc_iomux_set_pad(MX51_PIN_USBH1_DATA2, USB_PAD_CONFIG);
> + mxc_request_iomux(MX51_PIN_USBH1_DATA3, IOMUX_CONFIG_ALT0);
> + mxc_iomux_set_pad(MX51_PIN_USBH1_DATA3, USB_PAD_CONFIG);
> + mxc_request_iomux(MX51_PIN_USBH1_DATA4, IOMUX_CONFIG_ALT0);
> + mxc_iomux_set_pad(MX51_PIN_USBH1_DATA4, USB_PAD_CONFIG);
> + mxc_request_iomux(MX51_PIN_USBH1_DATA5, IOMUX_CONFIG_ALT0);
> + mxc_iomux_set_pad(MX51_PIN_USBH1_DATA5, USB_PAD_CONFIG);
> + mxc_request_iomux(MX51_PIN_USBH1_DATA6, IOMUX_CONFIG_ALT0);
> + mxc_iomux_set_pad(MX51_PIN_USBH1_DATA6, USB_PAD_CONFIG);
> + mxc_request_iomux(MX51_PIN_USBH1_DATA7, IOMUX_CONFIG_ALT0);
> + mxc_iomux_set_pad(MX51_PIN_USBH1_DATA7, USB_PAD_CONFIG);
> +
> + /*
> + * Configure USBH1 control pads
> + */
> +
> + /* USB PHY reset */
> + mxc_request_iomux(MX51_PIN_EIM_D27, IOMUX_CONFIG_ALT1);
> + mxc_iomux_set_pad(MX51_PIN_EIM_D27, PAD_CTL_PKE_ENABLE |
> + PAD_CTL_SRE_FAST | PAD_CTL_DRV_HIGH);
> +
> + /* USB HUB reset */
> + mxc_request_iomux(MX51_PIN_GPIO1_5, IOMUX_CONFIG_ALT0);
> + mxc_iomux_set_pad(MX51_PIN_GPIO1_5, PAD_CTL_PKE_ENABLE |
> + PAD_CTL_SRE_FAST | PAD_CTL_DRV_HIGH);
> +
> +
> + if (machine_is_efikasb()) {
> + /*
> + * Configure USBH2 pads (used on EfikaSB)
> + */
> + /* USBH2_DATA */
> + mxc_request_iomux(MX51_PIN_EIM_D16, IOMUX_CONFIG_ALT2);
> + mxc_iomux_set_pad(MX51_PIN_EIM_D16, USB_PAD_CONFIG);
> + mxc_request_iomux(MX51_PIN_EIM_D17, IOMUX_CONFIG_ALT2);
> + mxc_iomux_set_pad(MX51_PIN_EIM_D17, USB_PAD_CONFIG);
> + mxc_request_iomux(MX51_PIN_EIM_D18, IOMUX_CONFIG_ALT2);
> + mxc_iomux_set_pad(MX51_PIN_EIM_D18, USB_PAD_CONFIG);
> + mxc_request_iomux(MX51_PIN_EIM_D19, IOMUX_CONFIG_ALT2);
> + mxc_iomux_set_pad(MX51_PIN_EIM_D19, USB_PAD_CONFIG);
> + mxc_request_iomux(MX51_PIN_EIM_D20, IOMUX_CONFIG_ALT2);
> + mxc_iomux_set_pad(MX51_PIN_EIM_D20, USB_PAD_CONFIG);
> + mxc_request_iomux(MX51_PIN_EIM_D21, IOMUX_CONFIG_ALT2);
> + mxc_iomux_set_pad(MX51_PIN_EIM_D21, USB_PAD_CONFIG);
> + mxc_request_iomux(MX51_PIN_EIM_D22, IOMUX_CONFIG_ALT2);
> + mxc_iomux_set_pad(MX51_PIN_EIM_D22, USB_PAD_CONFIG);
> + mxc_request_iomux(MX51_PIN_EIM_D23, IOMUX_CONFIG_ALT2);
> + mxc_iomux_set_pad(MX51_PIN_EIM_D23, USB_PAD_CONFIG);
> +
> + /* USBH2_CLK */
> + mxc_request_iomux(MX51_PIN_EIM_A24, IOMUX_CONFIG_ALT2);
> + mxc_iomux_set_pad(MX51_PIN_EIM_A24, USB_PAD_CONFIG);
> + /* USBH2_DIR */
> + mxc_request_iomux(MX51_PIN_EIM_A25, IOMUX_CONFIG_ALT2);
> + mxc_iomux_set_pad(MX51_PIN_EIM_A25, USB_PAD_CONFIG);
> + /* USBH2_STP */
> + mxc_request_iomux(MX51_PIN_EIM_A26, IOMUX_CONFIG_ALT2);
> + mxc_iomux_set_pad(MX51_PIN_EIM_A26, USB_PAD_CONFIG);
> + /* USBH2_NXT */
> + mxc_request_iomux(MX51_PIN_EIM_A27, IOMUX_CONFIG_ALT2);
> + mxc_iomux_set_pad(MX51_PIN_EIM_A27, USB_PAD_CONFIG);
> + }
> +
> + /* WIFI EN (act low) */
> + mxc_request_iomux(MX51_PIN_EIM_A22, IOMUX_CONFIG_GPIO);
> + mxc_iomux_set_pad(MX51_PIN_EIM_A22, 0);
> + /* WIFI RESET */
> + mxc_request_iomux(MX51_PIN_EIM_A16, IOMUX_CONFIG_GPIO);
> + mxc_iomux_set_pad(MX51_PIN_EIM_A16, 0);
> + /* BT EN (act low) */
> + mxc_request_iomux(MX51_PIN_EIM_A17, IOMUX_CONFIG_GPIO);
> + mxc_iomux_set_pad(MX51_PIN_EIM_A17, 0);
> +}
> +
> +/*
> + * Enable devices connected to USB buses.
> + */
> +void efika_usb_enable_devices(void)
> +{
> + /* Enable Bluetooth */
> + gpio_direction_output(IOMUX_TO_GPIO(MX51_PIN_EIM_A17), 0);
> + udelay(10000);
> + gpio_set_value(IOMUX_TO_GPIO(MX51_PIN_EIM_A17), 1);
> +
> + /* Enable WiFi */
> + gpio_direction_output(IOMUX_TO_GPIO(MX51_PIN_EIM_A22), 1);
> + udelay(10000);
> +
> + /* Reset the WiFi chip */
> + gpio_direction_output(IOMUX_TO_GPIO(MX51_PIN_EIM_A16), 0);
> + udelay(10000);
> + gpio_set_value(IOMUX_TO_GPIO(MX51_PIN_EIM_A16), 1);
> +}
> +
> +/*
> + * Reset USB HUB (or HUBs on EfikaSB).
> + */
> +void efika_usb_hub_reset(void)
> +{
> + /* HUB reset */
> + gpio_direction_output(IOMUX_TO_GPIO(MX51_PIN_GPIO1_5), 1);
> + udelay(1000);
> + gpio_set_value(IOMUX_TO_GPIO(MX51_PIN_GPIO1_5), 0);
> + udelay(1000);
> + gpio_set_value(IOMUX_TO_GPIO(MX51_PIN_GPIO1_5), 1);
> +}
> +
> +/*
> + * Reset USB PHY (or PHYs on EfikaSB).
> + */
> +void efika_usb_phy_reset(void)
> +{
> + /* SMSC 3317 PHY reset */
> + gpio_direction_output(IOMUX_TO_GPIO(MX51_PIN_EIM_D27), 0);
> + udelay(1000);
> + gpio_set_value(IOMUX_TO_GPIO(MX51_PIN_EIM_D27), 1);
> +}
> +
> +/*
> + * Configure control registers of the USB controller.
> + */
> +void control_regs_setup(struct mx5_usb_control_regs *control)
> +{
> + clrsetbits_le32(&control->usbctrl,
> + (MXC_OTG_WUE | MXC_OTG_PM | MX51_H1_ULPI_IE | MX51_H1_WUE),
> + MX51_H1_PM);
> +
> + clrsetbits_le32(&control->phyctrl0,
> + MX51_OTG_OVERCURD,
> + MX51_EHCI_POWERPINSE);
> +
> + clrsetbits_le32(&control->phyctrl1,
> + MX51_SYSCLOCK_MASK,
> + MX51_SYSCLOCK_24_MHZ);
> +
> + setbits_le32(&control->usbctrl1, MX51_H1_EXTCLKE);
> +
> + clrsetbits_le32(&control->uh2ctrl,
> + (MX51_H2_ULPI_IE | MX51_H2_WUE),
> + MX51_H2_PM);
> +
> + udelay(10000);
> +}
> +
> +#define ULPI_ADDR_SHIFT 16
> +#define ulpi_write_mask(value) ((value) & 0xff)
> +#define ulpi_read_mask(value) (((value) >> 8) & 0xff)
> +
> +int ulpi_wait(struct usb_ehci *ehci, u32 ulpi_value, u32 ulpi_mask)
> +{
> + int timeout = ULPI_TIMEOUT;
> + u32 tmp;
> +
> + writel(ulpi_value, &ehci->ulpi_viewpoint);
> +
> + /* Wait for the bits in ulpi_mask to become zero. */
> + while (--timeout) {
> + tmp = readl(&ehci->ulpi_viewpoint);
> + if (!(tmp & ulpi_mask))
> + break;
> + WATCHDOG_RESET();
> + }
> +
> + return !timeout;
> +}
> +
> +int ulpi_wakeup(struct usb_ehci *ehci)
> +{
> + if (readl(&ehci->ulpi_viewpoint) & ULPI_SS)
> + return 0; /* already awake */
> + return ulpi_wait(ehci, ULPI_WU, ULPI_WU);
> +}
> +
> +void ulpi_write(struct usb_ehci *ehci, u32 reg, u32 value)
> +{
> + u32 tmp;
> + if (ulpi_wakeup(ehci)) {
> + printf("ULPI wakeup timed out\n");
> + return;
> + }
> +
> + tmp = ulpi_wait(ehci, ULPI_RWRUN | ULPI_RWCTRL |
> + reg << ULPI_ADDR_SHIFT | ulpi_write_mask(value), ULPI_RWRUN);
> + if (tmp)
> + printf("ULPI write timed out\n");
> +}
> +
> +u32 ulpi_read(struct usb_ehci *ehci, u32 reg)
> +{
> + if (ulpi_wakeup(ehci)) {
> + printf("ULPI wakeup timed out\n");
> + return 0;
> + }
> +
> + if (ulpi_wait(ehci, ULPI_RWRUN | reg << ULPI_ADDR_SHIFT, ULPI_RWRUN)) {
> + printf("ULPI read timed out\n");
> + return 0;
> + }
> +
> + return ulpi_read_mask(readl(&ehci->ulpi_viewpoint));
> +}
> +
> +void ulpi_init(struct usb_ehci *ehci, struct ulpi_regs *ulpi)
> +{
> + u32 tmp = 0;
> + int reg, i;
> +
> + /* Assemble ID from four ULPI ID registers (8 bits each). */
> + for (reg = ULPI_ID_REGS_COUNT - 1; reg >= 0; reg--)
> + tmp |= ulpi_read(ehci, reg) << (reg * 8);
> +
> + /* Split ID into vendor and product ID. */
> + debug("Found ULPI TX, ID %04x:%04x\n", tmp >> 16, tmp & 0xffff);
> +
> + /* ULPI integrity check */
> + for (i = 0; i < 2; i++) {
> + ulpi_write(ehci, (u32)&ulpi->scratch_write,
> + ULPI_TEST_VALUE << i);
> + tmp = ulpi_read(ehci, (u32)&ulpi->scratch_write);
> +
> + if (tmp != (ULPI_TEST_VALUE << i)) {
> + printf("ULPI integrity check failed\n");
> + return;
> + }
> + }
> +
> + /* Set ULPI flags. */
> + ulpi_write(ehci, (u32)&ulpi->otg_ctrl_write,
> + ULPI_OTG_EXTVBUSIND |
> + ULPI_OTG_DM_PULLDOWN | ULPI_OTG_DP_PULLDOWN);
> + ulpi_write(ehci, (u32)&ulpi->function_ctrl_write,
> + ULPI_FC_XCVRSEL | ULPI_FC_OPMODE_NORMAL |
> + ULPI_FC_SUSPENDM);
> + ulpi_write(ehci, (u32)&ulpi->iface_ctrl_write, 0);
> + ulpi_write(ehci, (u32)&ulpi->otg_ctrl_set,
> + ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT);
> +
> + /*
> + * NOTE: This violates USB specification, but otherwise, USB on Efika
> + * doesn't charge VBUS and as a result, USB doesn't work.
> + */
> + ulpi_write(ehci, (u32)&ulpi->otg_ctrl_set, ULPI_OTG_CHRGVBUS);
> +}
> +
> +/*
> + * Solve the VBUS reset problem on Efika
> + * by setting the CHRG_VBUS bit in the reset.
> + */
> +void ehci_fixup(uint32_t *status_reg, uint32_t *reg_ref)
> +{
> + struct usb_ehci *ehci = (struct usb_ehci *)(OTG_BASE_ADDR +
> + MX51_REGISTER_LAYOUT_LENGTH);
> + struct ulpi_regs *ulpi = (struct ulpi_regs *)0;
> +
> + u32 tmp = ulpi_read(ehci, (u32)&ulpi->otg_ctrl_write);
> + tmp |= ULPI_OTG_CHRGVBUS;
> + ulpi_write(ehci, (u32)&ulpi->otg_ctrl_write, tmp);
> +
> + /* USB 2.0 specification say 50 ms resets on root. */
> + wait_ms(50);
> +
> + /* Now terminate the reset. */
> + *reg_ref = ehci_readl(status_reg);
> + *reg_ref |= EHCI_PS_PE;
> +}
> +
> +void ehci0_init(struct usb_ehci *ehci)
> +{
> + writel(MX51_16BIT_UTMI, &ehci->portsc);
> +}
> +
> +void ehci1_init(struct usb_ehci *ehci, struct ulpi_regs *ulpi)
> +{
> + mxc_request_iomux(MX51_PIN_USBH1_STP, IOMUX_CONFIG_ALT2);
> + mxc_iomux_set_pad(MX51_PIN_USBH1_STP, PAD_CTL_DRV_HIGH |
> + PAD_CTL_PKE_ENABLE | PAD_CTL_SRE_FAST);
> + gpio_direction_output(IOMUX_TO_GPIO(MX51_PIN_USBH1_STP), 0);
> + udelay(1000);
> + gpio_set_value(IOMUX_TO_GPIO(MX51_PIN_USBH1_STP), 1);
> + udelay(1000);
> +
> + mxc_request_iomux(MX51_PIN_USBH1_STP, IOMUX_CONFIG_ALT0);
> + mxc_iomux_set_pad(MX51_PIN_USBH1_STP, USB_PAD_CONFIG);
> + udelay(10000);
> +
> + clrbits_le32(&ehci->usbcmd, MX51_ITC_IMMEDIATE_MASK);
> + udelay(10000);
> +
> + writel(MX51_ULPI_MODE_MASK, &ehci->portsc);
> + udelay(10000);
> +
> + ulpi_init(ehci, ulpi);
> +}
> +
> +void ehci2_init(struct usb_ehci *ehci, struct ulpi_regs *ulpi)
> +{
> + mxc_request_iomux(MX51_PIN_EIM_A26, IOMUX_CONFIG_ALT1);
> + mxc_iomux_set_pad(MX51_PIN_EIM_A26, PAD_CTL_DRV_HIGH |
> + PAD_CTL_PKE_ENABLE | PAD_CTL_SRE_FAST);
> + gpio_direction_output(IOMUX_TO_GPIO(MX51_PIN_EIM_A26), 0);
> + udelay(1000);
> + gpio_set_value(IOMUX_TO_GPIO(MX51_PIN_EIM_A26), 1);
> + udelay(1000);
> +
> + mxc_request_iomux(MX51_PIN_EIM_A26, IOMUX_CONFIG_ALT2);
> + mxc_iomux_set_pad(MX51_PIN_EIM_A26, USB_PAD_CONFIG);
> +
> + writel(MX51_ULPI_MODE_MASK, &ehci->portsc);
> + udelay(10000);
> +
> + ulpi_init(ehci, ulpi);
> +}
> +
> +int ehci_hcd_init(void)
> +{
> + struct usb_ehci *ehci;
> + struct mx5_usb_control_regs *mx5_usb_control_regs;
> + struct ulpi_regs *ulpi;
> +
> + mx5_usb_control_regs = (struct mx5_usb_control_regs *)(OTG_BASE_ADDR +
> + MX5_CTRL_REGS_OFFSET);
> + control_regs_setup(mx5_usb_control_regs);
> + ulpi = (struct ulpi_regs *)0;
> +
> + /* Init EHCI core */
> + ehci = (struct usb_ehci *)(OTG_BASE_ADDR +
> + (MX51_REGISTER_LAYOUT_LENGTH * CONFIG_MXC_USB_PORT));
> + hccr = (struct ehci_hccr *)((uint32_t)&ehci->caplength);
> + hcor = (struct ehci_hcor *)((uint32_t) hccr +
> + HC_LENGTH(ehci_readl(&hccr->cr_capbase)));
> + setbits_le32(&ehci->usbmode, CM_HOST);
> + setbits_le32(&ehci->control, USB_EN);
> +
> + /* Init iMX51 EHCI */
> + efika_usb_phy_reset();
> + efika_usb_hub_reset();
> + efika_usb_enable_devices();
> +
> + switch (CONFIG_MXC_USB_PORT) {
> + case 0:
> + ehci0_init(ehci);
> + break;
> + case 1:
> + ehci1_init(ehci, ulpi);
> + break;
> + case 2:
> + if (machine_is_efikasb())
> + ehci2_init(ehci, ulpi);
> + break;
> + };
> +
> + /* EfikaMX USB has issues ... */
> + udelay(10000);
> +
> + return 0;
> +}
> +
> +int ehci_hcd_stop(void)
> +{
> + return 0;
> +}
Most of the functions and defines above aren't board specific, right?
It would be a good thing to put them in an SoC specific location,
so any other board using that SoC can benefit from them.
I don't want to block on that issue, so if it simplifies you a
further ULPI patches submission - I don't care if you leave it here
and in the next patch set move to a common location.
Although the proper way would be to submit the framework(s) and then
adjust the users.
[...]
--
Regards,
Igor.
More information about the U-Boot
mailing list