[U-Boot] u-boot master on a pandaboard won't boot

[Tom Rini]

On Wed, Nov 2, 2011 at 6:03 AM, Lalancette, Christopher
<clalancette at irobot.com> wrote:
> Hello,
>     I've recently been playing around with u-boot on a pandaboard Rev A1.  The rest of my environment is an MLO built from x-loader git hash c4289f1bee035dea41536c5ba5e1bc36c7d493c4, and booting an ubuntu 11.04 kernel 2.6.38-1208-omap4.  Up until tag v2011.06, u-boot works flawlessly (as far as I've tested) on this combination.  However, if I take any u-boot release after that, including v2011.09 and u-boot git head, u-boot hangs very early on:
>
> Texas Instruments X-Loader 1.5.1 (Nov  2 2011 - 08:55:25)
> Reading boot sector
> Loading u-boot.bin from mmc

If you use SPL instead (so the 'MLO' that U-Boot also builds) does
everything work again?

-- 
Tom