[U-Boot] [PATCH v2] Phy/Marvell: Rewrite the MV88E1111 phy config function based on kernel code

[Zang Roy-R61911]

> -----Original Message-----
> From: Zang Roy-R61911
> Sent: Friday, October 28, 2011 12:52 PM
> To: u-boot at lists.denx.de
> Cc: Zang Roy-R61911; Kumar Gala
> Subject: [PATCH v2] Phy/Marvell: Rewrite the MV88E1111 phy config function based
> on kernel code
> 
> The original m88e1111s_config() does not do the SGMII mode
> initialization and is buggy. Rewrite the function according to
> 3.0.6 kernel function m88e1111_config_init() in drivers/net/phy/marvell.c
> 
> Signed-off-by: Roy Zang <tie-fei.zang at freescale.com>
> Acked-by: Andy Fleming <afleming at freescale.com>
> Cc: Kumar Gala <galak at kernel.crashing.org>
> ---
> v2: Use timeout instead of infinite loop
How about this patch?
Any feedback?
Thanks.
Roy