[U-Boot] Please pull u-boot-ti/master

[Albert ARIBAUD]

Hi Sandeep,

Le 03/11/2011 21:11, s-paulraj at ti.com a écrit :
> The following changes since commit 6d66073614539d94dabff1f63ebd962840c44b81:
>    Thomas Herzmann (1):
>          arm/km: portl2 environment address update to P1B
>
> are available in the git repository at:
>
>    git://git.denx.de/u-boot-ti.git master
>
> Bastian Ruppert (4):
>        Davinci: ea20: set console on UART0
>        Davinci: ea20: set GPIOs to hold MII-Phy in reset and set UART0-Switch for console
>        Davinci: ea20: add gpio for keeping power on in board_late_init
>        Davinci: ea20: add gpios for LCD backlight control
>
> Christian Riesch (1):
>        arm, davinci: Add function lpsc_syncreset()
>
> Heiko Schocher (13):
>        arm, davinci: replace CONFIG_PRELOADER with CONFIG_SPL_BUILD
>        arm, arm926: fix missing symbols in NAND_SPL mode
>        usb, davinci: add enable_vbus() weak function
>        arm, usb, davinci: make USBPHY_CTL register configurable
>        net, davinci_emac: make clock divider in MDIO control register configurable
>        spl: add option for adding post memory test to the SPL framework
>        arm, davinci: add support for new spl framework
>        spl, nand: add 4bit HW ecc oob first nand_read_page function
>        arm, davinci: add header files for dm365
>        arm, davinci: add lowlevel function for dm365 soc
>        arm926ejs, davinci: add cpuinfo for dm365
>        arm926ejs, davinci: add missing spi defines for dm365
>        arm, davinci: add cam_enc_4xx support
>
> Ilya Yanok (2):
>        davinci_emac: compilation fix, phy is array now
>        omap/spl: actually enable the console
>
> Sanjeev Premi (7):
>        omap3evm: Set environment variable 'ethaddr'
>        omap3evm: Reorder related config options
>        omap3evm: Prepare to split configuration
>        omap3evm: move common config options to new file
>        omap3evm: Add (quick) configuration for MMC/SD only
>        omap3evm: Add (quick) configuration for NAND only
>        omap3evm: fix errors caused by multiple definitions
>
> Stefano Babic (8):
>        Davinci: ea20: Add NAND support
>        Davinci: ea20: Add early init to get early output from console
>        Davinci: ea20: Add default U-Boot environment
>        ARM: Davinci: added missing registers to hardware.h
>        VIDEO: davinci: add framebuffer to da8xx
>        Davinci: ea20: added video support
>        Davinci: ea20: added I2C support
>        Davinci: ea20: added PREBOOT to configuration

Applied to u-boot-arm/master, thanks!

Amicalement,
-- 
Albert.