[U-Boot] [PATCH v2 6/8] tegra2: Implement SPI / UART GPIO switch
Simon Glass
sjg at chromium.org
Thu Nov 3 23:41:37 CET 2011
The Tegra2 Seaboard has the unfortunate feature that SPI and the console
UART are multiplexed on the same pins. We need to switch between one
and the other during SPI and console activity.
This new file implements a switch and keeps track of which peripheral
owns the pins. It also flips over the controlling GPIO as needed
Since we are adding a second file to board/nvidia/common, we create
a proper Makefile there and remove the direct board.o include from
board/nvidia/seaboard/Makefile
Signed-off-by: Simon Glass <sjg at chromium.org>
---
Changes in v2:
- Fix up GPIO selection to use gpio_request() first
- Rename uart-spi-fix to uart-spi-switch
- Rename uart/spi_enable() to pinmux_select_uart/spi()
arch/arm/include/asm/arch-tegra2/uart-spi-switch.h | 49 +++++++
board/nvidia/common/Makefile | 47 +++++++
board/nvidia/common/uart-spi-switch.c | 141 ++++++++++++++++++++
board/nvidia/seaboard/Makefile | 1 -
4 files changed, 237 insertions(+), 1 deletions(-)
create mode 100644 arch/arm/include/asm/arch-tegra2/uart-spi-switch.h
create mode 100644 board/nvidia/common/Makefile
create mode 100644 board/nvidia/common/uart-spi-switch.c
diff --git a/arch/arm/include/asm/arch-tegra2/uart-spi-switch.h b/arch/arm/include/asm/arch-tegra2/uart-spi-switch.h
new file mode 100644
index 0000000..64570c8
--- /dev/null
+++ b/arch/arm/include/asm/arch-tegra2/uart-spi-switch.h
@@ -0,0 +1,49 @@
+/*
+ * Copyright (c) 2011 The Chromium OS Authors.
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _UART_SPI_SWITCH_H
+#define _UART_SPI_SWITCH_H
+
+#if defined(CONFIG_SPI_UART_SWITCH)
+
+#ifndef __ASSEMBLY__
+/*
+ * Signal that we are about to use the UART. This unfortunate hack is
+ * required by Seaboard, which cannot use its console and SPI at the same
+ * time! If the board file provides this, the board config will declare it.
+ * Let this be a lesson for others.
+ */
+void pinmux_select_uart(NS16550_t regs);
+
+/*
+ * Signal that we are about the use the SPI bus.
+ */
+void pinmux_select_spi(void);
+#endif
+
+#else /* not CONFIG_SPI_UART_SWITCH */
+
+static inline void pinmux_select_uart(NS16550_t regs) {}
+static inline void pinmux_select_spi(void) {}
+
+#endif
+
+#endif
diff --git a/board/nvidia/common/Makefile b/board/nvidia/common/Makefile
new file mode 100644
index 0000000..3e748fd
--- /dev/null
+++ b/board/nvidia/common/Makefile
@@ -0,0 +1,47 @@
+# Copyright (c) 2011 The Chromium OS Authors.
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+
+include $(TOPDIR)/config.mk
+
+ifneq ($(OBJTREE),$(SRCTREE))
+$(shell mkdir -p $(obj)board/$(VENDOR)/common)
+endif
+
+LIB = $(obj)lib$(VENDOR).o
+
+COBJS-y += board.o
+COBJS-$(CONFIG_SPI_UART_SWITCH) += uart-spi-switch.o
+
+COBJS := $(COBJS-y)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+all: $(LIB)
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
+ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
+
+#########################################################################
+# This is for $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/nvidia/common/uart-spi-switch.c b/board/nvidia/common/uart-spi-switch.c
new file mode 100644
index 0000000..9ccad4a
--- /dev/null
+++ b/board/nvidia/common/uart-spi-switch.c
@@ -0,0 +1,141 @@
+/*
+ * Copyright (c) 2011 The Chromium OS Authors.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <ns16550.h>
+#include <libfdt.h>
+#include <fdt_support.h>
+#include <asm/gpio.h>
+#include <asm/arch/pinmux.h>
+#include <asm/arch/uart-spi-switch.h>
+#include <asm/arch/tegra2.h>
+#include <asm/arch/tegra2_spi.h>
+
+
+/* position of the UART/SPI select switch */
+enum spi_uart_switch {
+ SWITCH_UNKNOWN,
+ SWITCH_SPI,
+ SWITCH_UART,
+ SWITCH_BOTH
+};
+
+/* Information about the spi/uart switch */
+struct spi_uart {
+ int gpio; /* GPIO to control switch */
+ NS16550_t regs; /* Address of UART affected */
+ u32 port; /* Port number of UART affected */
+};
+
+static struct spi_uart local;
+static enum spi_uart_switch switch_pos; /* Current switch position */
+
+
+static void get_config(struct spi_uart *config)
+{
+#if defined CONFIG_SPI_CORRUPTS_UART
+ config->gpio = CONFIG_UART_DISABLE_GPIO;
+ config->regs = (NS16550_t)CONFIG_SPI_CORRUPTS_UART;
+ config->port = CONFIG_SPI_CORRUPTS_UART_NR;
+#else
+ config->gpio = -1;
+#endif
+}
+
+/*
+ * Init the UART / SPI switch. This can be called before relocation so we must
+ * not access BSS.
+ */
+void gpio_early_init_uart(void)
+{
+ struct spi_uart config;
+
+ get_config(&config);
+ if (config.gpio != -1) {
+ /* Cannot provide a label prior to relocation */
+ gpio_request(config.gpio, NULL);
+ gpio_direction_output(config.gpio, 0);
+ }
+}
+
+/*
+ * Configure the UART / SPI switch.
+ */
+void gpio_config_uart(void)
+{
+ get_config(&local);
+ if (local.gpio != -1) {
+ gpio_direction_output(local.gpio, 0);
+ switch_pos = SWITCH_UART;
+ } else {
+ /*
+ * If we're here we don't have a SPI switch; go ahead and
+ * enable the SPI now. We didn't in spi_init() so we wouldn't
+ * kill the UART.
+ */
+ pinmux_set_func(PINGRP_GMC, PMUX_FUNC_SFLASH);
+ switch_pos = SWITCH_BOTH;
+ }
+}
+
+static void spi_uart_switch(struct spi_uart *config,
+ enum spi_uart_switch new_pos)
+{
+ if (switch_pos == SWITCH_BOTH || new_pos == switch_pos)
+ return;
+
+ /* if the UART was selected, allow it to drain */
+ if (switch_pos == SWITCH_UART)
+ NS16550_drain(config->regs, config->port);
+
+ /* We need to dynamically change the pinmux, shared w/UART RXD/CTS */
+ pinmux_set_func(PINGRP_GMC, new_pos == SWITCH_SPI ?
+ PMUX_FUNC_SFLASH : PMUX_FUNC_UARTD);
+
+ /*
+ * On Seaboard, MOSI/MISO are shared w/UART.
+ * Use GPIO I3 (UART_DISABLE) to tristate UART during SPI activity.
+ * Enable UART later (cs_deactivate) so we can use it for U-Boot comms.
+ */
+ gpio_direction_output(config->gpio, new_pos == SWITCH_SPI);
+ switch_pos = new_pos;
+
+ /* if the SPI was selected, clear any junk bytes in the UART */
+ if (switch_pos == SWITCH_UART) {
+ /* TODO: What if it is part-way through clocking in junk? */
+ udelay(100);
+ NS16550_clear(config->regs, config->port);
+ }
+}
+
+void pinmux_select_uart(NS16550_t regs)
+{
+ /* Also prevents calling spi_uart_switch() before relocation */
+ if (regs == local.regs)
+ spi_uart_switch(&local, SWITCH_UART);
+}
+
+void pinmux_select_spi(void)
+{
+ spi_uart_switch(&local, SWITCH_SPI);
+}
diff --git a/board/nvidia/seaboard/Makefile b/board/nvidia/seaboard/Makefile
index f6599de..b6efa1c 100644
--- a/board/nvidia/seaboard/Makefile
+++ b/board/nvidia/seaboard/Makefile
@@ -31,7 +31,6 @@ endif
LIB = $(obj)lib$(BOARD).o
COBJS := $(BOARD).o
-COBJS += ../common/board.o
SRCS := $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS))
--
1.7.3.1
More information about the U-Boot
mailing list