[U-Boot] [PATCH] AT91: pio: Add PIO3 features
Hong Xu
hong.xu at atmel.com
Fri Nov 4 07:43:37 CET 2011
This patch adds the support for new PIO controller introduced by some
AT91 SoCs.
New features include
* More peripheral multiplexing
* Pull-down, Schmitt trigger, Debouncer
* More irq trigger mode (may be not interesting in U-Boot)
Signed-off-by: Hong Xu <hong.xu at atmel.com>
---
arch/arm/include/asm/arch-at91/at91_pio.h | 50 ++++++++++-
drivers/gpio/at91_gpio.c | 130 +++++++++++++++++++++++++++-
2 files changed, 172 insertions(+), 8 deletions(-)
diff --git a/arch/arm/include/asm/arch-at91/at91_pio.h b/arch/arm/include/asm/arch-at91/at91_pio.h
index 416cabf..26e9766 100644
--- a/arch/arm/include/asm/arch-at91/at91_pio.h
+++ b/arch/arm/include/asm/arch-at91/at91_pio.h
@@ -4,6 +4,7 @@
* Copyright (C) 2005 Ivan Kokshaysky
* Copyright (C) SAN People
* Copyright (C) 2009 Jens Scharsig (js_at_ng at scharsoft.de)
+ * Copyright (C) 2011 Hong Xu (hong.xu at atmel.com)
*
* Parallel I/O Controller (PIO) - System peripherals registers.
* Based on AT91RM9200 datasheet revision E.
@@ -17,7 +18,6 @@
#ifndef AT91_PIO_H
#define AT91_PIO_H
-
#define AT91_ASM_PIO_RANGE 0x200
#define AT91_ASM_PIOC_ASR \
(ATMEL_BASE_PIO + AT91_PIO_PORTC * AT91_ASM_PIO_RANGE + 0x70)
@@ -66,14 +66,51 @@ typedef struct at91_port {
u32 puer; /* 0x64 Pull-up Enable Register */
u32 pusr; /* 0x68 Pad Pull-up Status Register */
u32 reserved4;
+#if defined(ATMEL_CPU_HAS_PIO3)
+ u32 abcdsr1; /* 0x70 Peripheral ABCD Select Register 1 */
+ u32 abcdsr2; /* 0x74 Peripheral ABCD Select Register 2 */
+ u32 reserved5[2];
+ u32 ifscdr; /* 0x80 Input Filter SCLK Disable Register */
+ u32 ifscer; /* 0x84 Input Filter SCLK Enable Register */
+ u32 ifscsr; /* 0x88 Input Filter SCLK Status Register */
+ u32 scdr; /* 0x8C SCLK Divider Debouncing Register */
+#define PIO_SCDR_DIV_MASK (0x3fff << 0) /* Slow Clock Divider Mask */
+ u32 ppddr; /* 0x90 Pad Pull-down Disable Register */
+ u32 ppder; /* 0x94 Pad Pull-down Enable Register */
+ u32 ppdsr; /* 0x98 Pad Pull-down Status Register */
+ u32 reserved6;
+#else
u32 asr; /* 0x70 Select A Register */
u32 bsr; /* 0x74 Select B Register */
u32 absr; /* 0x78 AB Select Status Register */
u32 reserved5[9]; /* */
+#endif
u32 ower; /* 0xA0 Output Write Enable Register */
u32 owdr; /* 0xA4 Output Write Disable Register */
- u32 owsr; /* OxA8 utput Write Status Register */
- u32 reserved6[85];
+ u32 owsr; /* OxA8 Output Write Status Register */
+#if defined(ATMEL_CPU_HAS_PIO3)
+ u32 reserved7; /* */
+ u32 aimer; /* Additional Interrupt Modes Enable Register*/
+ u32 aimdr; /* Additional Interrupt Modes Disable Register*/
+ u32 aimmr; /* Additional Intterupt Modes Mask Register */
+ u32 reserved8; /* */
+ u32 esr; /* 0xC0 Edge Select Register */
+ u32 lsr; /* 0xC4 Level Select Register */
+ u32 elsr; /* 0xC8 Edge/Level Status Register */
+ u32 reserved9; /* 0xCC */
+ u32 fellsr; /* 0xD0 Falling Edge/Low Level Select Register*/
+ u32 rehlsr; /* 0xD4 Rising Edge/High Level Select Register*/
+ u32 frlhsr; /* 0xD8 Fall/Rise - Low/High Status Register */
+ u32 reserved10; /* */
+ u32 locksr /* 0xE0 Lock Status */
+ u32 wpmr /* 0xE4 Write Protect Mode Register */
+ u32 wpsr /* 0xE4 Write Protect Status Register */
+ u32 reserved11[5]; /* */
+ u32 schmitt; /* 0x100 Schmitt Trigger Register */
+ u32 reserved12[7];
+#else
+ u32 reserved6[21];
+#endif
} at91_port_t;
typedef union at91_pio {
@@ -94,6 +131,13 @@ typedef union at91_pio {
#ifdef CONFIG_AT91_GPIO
int at91_set_a_periph(unsigned port, unsigned pin, int use_pullup);
int at91_set_b_periph(unsigned port, unsigned pin, int use_pullup);
+#if defined(ATMEL_CPU_HAS_PIO3)
+int at91_set_c_periph(unsigned port, unsigned pin, int use_pullup);
+int at91_set_d_periph(unsigned port, unsigned pin, int use_pullup);
+int at91_set_pio_debounce(unsigned port, unsigned pin, int is_on, int div);
+int at91_set_pio_pulldown(unsigned port, unsigned pin, int is_on);
+int at91_set_pio_disable_schmitt_trig(unsigned port, unsigned pin);
+#endif
int at91_set_pio_input(unsigned port, unsigned pin, int use_pullup);
int at91_set_pio_multi_drive(unsigned port, unsigned pin, int is_on);
int at91_set_pio_output(unsigned port, unsigned pin, int value);
diff --git a/drivers/gpio/at91_gpio.c b/drivers/gpio/at91_gpio.c
index be2a026..3676ba1 100644
--- a/drivers/gpio/at91_gpio.c
+++ b/drivers/gpio/at91_gpio.c
@@ -1,6 +1,8 @@
/*
* Memory Setup stuff - taken from blob memsetup.S
*
+ * Copyright (C) 2011 Hong Xu (hong.xu at atmel.com)
+ *
* Copyright (C) 2009 Jens Scharsig (js_at_ng at scharsoft.de)
*
* Copyright (C) 2005 HP Labs
@@ -58,7 +60,7 @@ int at91_set_pio_pullup(unsigned port, unsigned pin, int use_pullup)
}
/*
- * mux the pin to the "GPIO" peripheral role.
+ * mux the pin to the "GPIO" peripheral function.
*/
int at91_set_pio_periph(unsigned port, unsigned pin, int use_pullup)
{
@@ -75,7 +77,7 @@ int at91_set_pio_periph(unsigned port, unsigned pin, int use_pullup)
}
/*
- * mux the pin to the "A" internal peripheral role.
+ * mux the pin to the "A" internal peripheral function.
*/
int at91_set_a_periph(unsigned port, unsigned pin, int use_pullup)
{
@@ -86,14 +88,21 @@ int at91_set_a_periph(unsigned port, unsigned pin, int use_pullup)
mask = 1 << pin;
writel(mask, &pio->port[port].idr);
at91_set_pio_pullup(port, pin, use_pullup);
+#if defined(ATMEL_CPU_HAS_PIO3)
+ writel(readl(&pio->port[port].abcdsr1) & ~mask,
+ &pio->port[port].abcdsr1);
+ writel(readl(&pio->port[port].abcdsr2) & ~mask,
+ &pio->port[port].abcdsr2);
+#else
writel(mask, &pio->port[port].asr);
+#endif
writel(mask, &pio->port[port].pdr);
}
return 0;
}
/*
- * mux the pin to the "B" internal peripheral role.
+ * mux the pin to the "B" internal peripheral function.
*/
int at91_set_b_periph(unsigned port, unsigned pin, int use_pullup)
{
@@ -104,13 +113,120 @@ int at91_set_b_periph(unsigned port, unsigned pin, int use_pullup)
mask = 1 << pin;
writel(mask, &pio->port[port].idr);
at91_set_pio_pullup(port, pin, use_pullup);
+#if defined(ATMEL_CPU_HAS_PIO3)
+ writel(readl(&pio->port[port].abcdsr1) | mask,
+ &pio->port[port].abcdsr1);
+ writel(readl(&pio->port[port].abcdsr2) & ~mask,
+ &pio->port[port].abcdsr2);
+#else
writel(mask, &pio->port[port].bsr);
+#endif
+ writel(mask, &pio->port[port].pdr);
+ }
+ return 0;
+}
+
+#if defined(ATMEL_CPU_HAS_PIO3)
+/*
+ * mux the pin to the "C" internal peripheral function.
+ */
+int at91_set_c_periph(unsigned port, unsigned pin, int use_pullup)
+{
+ at91_pio_t *pio = (at91_pio_t *) ATMEL_BASE_PIO;
+ u32 mask;
+
+ if ((port < ATMEL_PIO_PORTS) && (pin < 32)) {
+ mask = 1 << pin;
+ writel(mask, &pio->port[port].idr);
+ at91_set_pio_pullup(port, pin, use_pullup);
+ writel(readl(&pio->port[port].abcdsr1) & ~mask,
+ &pio->port[port].abcdsr1);
+ writel(readl(&pio->port[port].abcdsr2) | mask,
+ &pio->port[port].abcdsr2);
writel(mask, &pio->port[port].pdr);
}
return 0;
}
/*
+ * mux the pin to the "D" internal peripheral function.
+ */
+int at91_set_d_periph(unsigned port, unsigned pin, int use_pullup)
+{
+ at91_pio_t *pio = (at91_pio_t *) ATMEL_BASE_PIO;
+ u32 mask;
+
+ if ((port < ATMEL_PIO_PORTS) && (pin < 32)) {
+ mask = 1 << pin;
+ writel(mask, &pio->port[port].idr);
+ at91_set_pio_pullup(port, pin, use_pullup);
+ writel(readl(&pio->port[port].abcdsr1) | mask,
+ &pio->port[port].abcdsr1);
+ writel(readl(&pio->port[port].abcdsr2) | mask,
+ &pio->port[port].abcdsr2);
+ writel(mask, &pio->port[port].pdr);
+ }
+ return 0;
+}
+
+/*
+ * enable/disable the debounce filter.
+ */
+int at91_set_pio_debounce(unsigned port, unsigned pin, int is_on, int div)
+{
+ at91_pio_t *pio = (at91_pio_t *) ATMEL_BASE_PIO;
+
+ if ((port < ATMEL_PIO_PORTS) && (pin < 32)) {
+ if (is_on) {
+ writel(1 << pin, &pio->port[port].ifscer);
+ writel(div & PIO_SCDR_DIV_MASK, &pio->port[port].scdr);
+ writel(1 << pin, &pio->port[port].ifer);
+ } else {
+ writel(1 << pin, &pio->port[port].ifdr);
+ }
+ }
+ return 0;
+}
+
+/*
+ * enable/disable the pull-down.
+ * If pull-up already enabled while calling the function, we disable it.
+ */
+int at91_set_pio_pulldown(unsigned port, unsigned pin, int is_pulldown)
+{
+ at91_pio_t *pio = (at91_pio_t *) ATMEL_BASE_PIO;
+
+ if ((port < ATMEL_PIO_PORTS) && (pin < 32)) {
+ writel(1 << pin, &pio->port[port].pudr);
+ if (is_pulldown)
+ writel(1 << pin, &pio->port[port].ppder);
+ else
+ writel(1 << pin, &pio->port[port].ppddr);
+ }
+ return 0;
+}
+
+/*
+ * Set Schmitt trigger mode
+ */
+int at91_set_pio_schmitt_trig(unsigned port, unsigned pin, int is_enabled)
+{
+ at91_pio_t *pio = (at91_pio_t *) ATMEL_BASE_PIO;
+ u32 data;
+
+ if ((port < ATMEL_PIO_PORTS) && (pin < 32)) {
+ data = readl(&pio->port[port].schmitt);
+ if (is_enabled)
+ data &= ~(1 << pin);
+ else
+ data |= (1 << pin);
+ writel(data, &pio->port[port].schmitt);
+ }
+ return 0;
+}
+#endif
+
+/*
* mux the pin to the gpio controller (instead of "A" or "B" peripheral), and
* configure it for an input.
*/
@@ -162,10 +278,14 @@ int at91_set_pio_deglitch(unsigned port, unsigned pin, int is_on)
if ((port < ATMEL_PIO_PORTS) && (pin < 32)) {
mask = 1 << pin;
- if (is_on)
+ if (is_on) {
+#if defined(ATMEL_CPU_HAS_PIO3)
+ writel(mask, &pio->port[port].ifscdr);
+#endif
writel(mask, &pio->port[port].ifer);
- else
+ } else {
writel(mask, &pio->port[port].ifdr);
+ }
}
return 0;
}
--
1.7.3.3
More information about the U-Boot
mailing list