[U-Boot] [PATCH] devkit8000: Fix NAND SPL on boards with 256MB NAND

[Thomas Weber]

Am 26.10.2011 20:09, schrieb Tom Rini:
> The devkit8000 ships with either a 128MB or 256MB NAND chip.  In
> order for SPL to work with 256MB NAND CONFIG_SYS_NAND_5_ADDR_CYCLE
> needs to be set.  After talking with Scott Wood this should be
> safe to set even for smaller NAND chips.
>
> Cc: Scott Wood <scottwood at freescale.com>
> Cc: Frederik Kriewitz <frederik at kriewitz.eu>
> Cc: Albert ARIBAUD <albert.u.boot at aribaud.net>
> Signed-off-by: Tom Rini <trini at ti.com>
> ---
>  include/configs/devkit8000.h |    1 +
>  1 files changed, 1 insertions(+), 0 deletions(-)
>
> diff --git a/include/configs/devkit8000.h b/include/configs/devkit8000.h
> index ba0d23e..1856aa9 100644
> --- a/include/configs/devkit8000.h
> +++ b/include/configs/devkit8000.h
> @@ -332,6 +332,7 @@
>  #define CONFIG_SPL_BSS_MAX_SIZE		0x80000
>  
>  /* NAND boot config */
> +#define CONFIG_SYS_NAND_5_ADDR_CYCLE
>  #define CONFIG_SYS_NAND_PAGE_COUNT	64
>  #define CONFIG_SYS_NAND_PAGE_SIZE	2048
>  #define CONFIG_SYS_NAND_OOBSIZE		64

Tested-by: Thomas Weber <weber at corscience.de>

on Devkit8000 with 256 MB NAND.

Tomorrow I will test it with a 128 MB NAND devkit8000.

Thomas