[U-Boot] [PATCH 01/20] iMX28: Initial support for iMX28 CPU
Marek Vasut
marek.vasut at gmail.com
Wed Nov 9 10:18:08 CET 2011
This patch supports:
- Timers
- Debug UART
- Clock
Signed-off-by: Marek Vasut <marek.vasut at gmail.com>
Cc: Stefano Babic <sbabic at denx.de>
Cc: Wolfgang Denk <wd at denx.de>
Cc: Detlev Zundel <dzu at denx.de>
---
arch/arm/cpu/arm926ejs/mx28/Makefile | 46 +
arch/arm/cpu/arm926ejs/mx28/clock.c | 355 +++++++
arch/arm/cpu/arm926ejs/mx28/mx28.c | 193 ++++
arch/arm/cpu/arm926ejs/mx28/timer.c | 141 +++
arch/arm/include/asm/arch-mx28/clock.h | 61 ++
arch/arm/include/asm/arch-mx28/imx-regs.h | 38 +
arch/arm/include/asm/arch-mx28/regs-base.h | 88 ++
arch/arm/include/asm/arch-mx28/regs-bch.h | 230 +++++
arch/arm/include/asm/arch-mx28/regs-clkctrl.h | 312 ++++++
arch/arm/include/asm/arch-mx28/regs-common.h | 66 ++
arch/arm/include/asm/arch-mx28/regs-gpmi.h | 222 +++++
arch/arm/include/asm/arch-mx28/regs-i2c.h | 207 ++++
arch/arm/include/asm/arch-mx28/regs-ocotp.h | 173 ++++
arch/arm/include/asm/arch-mx28/regs-pinctrl.h | 1284 +++++++++++++++++++++++++
arch/arm/include/asm/arch-mx28/regs-power.h | 413 ++++++++
arch/arm/include/asm/arch-mx28/regs-rtc.h | 147 +++
arch/arm/include/asm/arch-mx28/regs-ssp.h | 349 +++++++
arch/arm/include/asm/arch-mx28/regs-timrot.h | 171 ++++
arch/arm/include/asm/arch-mx28/sys_proto.h | 30 +
19 files changed, 4526 insertions(+), 0 deletions(-)
create mode 100644 arch/arm/cpu/arm926ejs/mx28/Makefile
create mode 100644 arch/arm/cpu/arm926ejs/mx28/clock.c
create mode 100644 arch/arm/cpu/arm926ejs/mx28/mx28.c
create mode 100644 arch/arm/cpu/arm926ejs/mx28/timer.c
create mode 100644 arch/arm/include/asm/arch-mx28/clock.h
create mode 100644 arch/arm/include/asm/arch-mx28/imx-regs.h
create mode 100644 arch/arm/include/asm/arch-mx28/regs-base.h
create mode 100644 arch/arm/include/asm/arch-mx28/regs-bch.h
create mode 100644 arch/arm/include/asm/arch-mx28/regs-clkctrl.h
create mode 100644 arch/arm/include/asm/arch-mx28/regs-common.h
create mode 100644 arch/arm/include/asm/arch-mx28/regs-gpmi.h
create mode 100644 arch/arm/include/asm/arch-mx28/regs-i2c.h
create mode 100644 arch/arm/include/asm/arch-mx28/regs-ocotp.h
create mode 100644 arch/arm/include/asm/arch-mx28/regs-pinctrl.h
create mode 100644 arch/arm/include/asm/arch-mx28/regs-power.h
create mode 100644 arch/arm/include/asm/arch-mx28/regs-rtc.h
create mode 100644 arch/arm/include/asm/arch-mx28/regs-ssp.h
create mode 100644 arch/arm/include/asm/arch-mx28/regs-timrot.h
create mode 100644 arch/arm/include/asm/arch-mx28/sys_proto.h
diff --git a/arch/arm/cpu/arm926ejs/mx28/Makefile b/arch/arm/cpu/arm926ejs/mx28/Makefile
new file mode 100644
index 0000000..98504f9
--- /dev/null
+++ b/arch/arm/cpu/arm926ejs/mx28/Makefile
@@ -0,0 +1,46 @@
+#
+# (C) Copyright 2000-2006
+# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(SOC).o
+
+COBJS = clock.o mx28.o timer.o
+
+SRCS := $(START:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+START := $(addprefix $(obj),$(START))
+
+all: $(obj).depend $(LIB)
+
+$(LIB): $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/arch/arm/cpu/arm926ejs/mx28/clock.c b/arch/arm/cpu/arm926ejs/mx28/clock.c
new file mode 100644
index 0000000..f698506
--- /dev/null
+++ b/arch/arm/cpu/arm926ejs/mx28/clock.c
@@ -0,0 +1,355 @@
+/*
+ * Freescale i.MX28 clock setup code
+ *
+ * Copyright (C) 2011 Marek Vasut <marek.vasut at gmail.com>
+ * on behalf of DENX Software Engineering GmbH
+ *
+ * Based on code from LTIB:
+ * Copyright (C) 2010 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/errno.h>
+#include <asm/io.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/imx-regs.h>
+
+/* The PLL frequency is always 480MHz, see section 10.2 in iMX28 datasheet. */
+#define PLL_FREQ_KHZ 480000
+#define PLL_FREQ_COEF 18
+/* The XTAL frequency is always 24MHz, see section 10.2 in iMX28 datasheet. */
+#define XTAL_FREQ_KHZ 24000
+
+#define PLL_FREQ_MHZ (PLL_FREQ_KHZ / 1000)
+#define XTAL_FREQ_MHZ (XTAL_FREQ_KHZ / 1000)
+
+static uint32_t mx28_get_pclk(void)
+{
+ struct mx28_clkctrl_regs *clkctrl_regs =
+ (struct mx28_clkctrl_regs *)MXS_CLKCTRL_BASE;
+
+ uint32_t clkctrl, clkseq, clkfrac;
+ uint32_t frac, div;
+
+ clkctrl = readl(&clkctrl_regs->hw_clkctrl_cpu);
+
+ /* No support of fractional divider calculation */
+ if (clkctrl &
+ (CLKCTRL_CPU_DIV_XTAL_FRAC_EN | CLKCTRL_CPU_DIV_CPU_FRAC_EN)) {
+ return 0;
+ }
+
+ clkseq = readl(&clkctrl_regs->hw_clkctrl_clkseq);
+
+ /* XTAL Path */
+ if (clkseq & CLKCTRL_CLKSEQ_BYPASS_CPU) {
+ div = (clkctrl & CLKCTRL_CPU_DIV_XTAL_MASK) >>
+ CLKCTRL_CPU_DIV_XTAL_OFFSET;
+ return XTAL_FREQ_MHZ / div;
+ }
+
+ /* REF Path */
+ clkfrac = readl(&clkctrl_regs->hw_clkctrl_frac0);
+ frac = clkfrac & CLKCTRL_FRAC0_CPUFRAC_MASK;
+ div = clkctrl & CLKCTRL_CPU_DIV_CPU_MASK;
+ return (PLL_FREQ_MHZ * PLL_FREQ_COEF / frac) / div;
+}
+
+static uint32_t mx28_get_hclk(void)
+{
+ struct mx28_clkctrl_regs *clkctrl_regs =
+ (struct mx28_clkctrl_regs *)MXS_CLKCTRL_BASE;
+
+ uint32_t div;
+ uint32_t clkctrl;
+
+ clkctrl = readl(&clkctrl_regs->hw_clkctrl_hbus);
+
+ /* No support of fractional divider calculation */
+ if (clkctrl & CLKCTRL_HBUS_DIV_FRAC_EN)
+ return 0;
+
+ div = clkctrl & CLKCTRL_HBUS_DIV_MASK;
+ return mx28_get_pclk() / div;
+}
+
+static uint32_t mx28_get_emiclk(void)
+{
+ struct mx28_clkctrl_regs *clkctrl_regs =
+ (struct mx28_clkctrl_regs *)MXS_CLKCTRL_BASE;
+
+ uint32_t frac, div;
+ uint32_t clkctrl, clkseq, clkfrac;
+
+ clkseq = readl(&clkctrl_regs->hw_clkctrl_clkseq);
+ clkctrl = readl(&clkctrl_regs->hw_clkctrl_emi);
+
+ /* XTAL Path */
+ if (clkseq & CLKCTRL_CLKSEQ_BYPASS_EMI) {
+ div = (clkctrl & CLKCTRL_EMI_DIV_XTAL_MASK) >>
+ CLKCTRL_EMI_DIV_XTAL_OFFSET;
+ return XTAL_FREQ_MHZ / div;
+ }
+
+ clkfrac = readl(&clkctrl_regs->hw_clkctrl_frac0);
+
+ /* REF Path */
+ frac = (clkfrac & CLKCTRL_FRAC0_EMIFRAC_MASK) >>
+ CLKCTRL_FRAC0_EMIFRAC_OFFSET;
+ div = clkctrl & CLKCTRL_EMI_DIV_EMI_MASK;
+ return (PLL_FREQ_MHZ * PLL_FREQ_COEF / frac) / div;
+}
+
+static uint32_t mx28_get_gpmiclk(void)
+{
+ struct mx28_clkctrl_regs *clkctrl_regs =
+ (struct mx28_clkctrl_regs *)MXS_CLKCTRL_BASE;
+
+ uint32_t frac, div;
+ uint32_t clkctrl, clkseq, clkfrac;
+
+ clkseq = readl(&clkctrl_regs->hw_clkctrl_clkseq);
+ clkctrl = readl(&clkctrl_regs->hw_clkctrl_gpmi);
+
+ /* XTAL Path */
+ if (clkseq & CLKCTRL_CLKSEQ_BYPASS_GPMI) {
+ div = clkctrl & CLKCTRL_GPMI_DIV_MASK;
+ return XTAL_FREQ_MHZ / div;
+ }
+
+ clkfrac = readl(&clkctrl_regs->hw_clkctrl_frac1);
+
+ /* REF Path */
+ frac = (clkfrac & CLKCTRL_FRAC1_GPMIFRAC_MASK) >>
+ CLKCTRL_FRAC1_GPMIFRAC_OFFSET;
+ div = clkctrl & CLKCTRL_GPMI_DIV_MASK;
+ return (PLL_FREQ_MHZ * PLL_FREQ_COEF / frac) / div;
+}
+
+/*
+ * Set IO clock frequency, in kHz
+ */
+void mx28_set_ioclk(enum mxs_ioclock io, uint32_t freq)
+{
+ struct mx28_clkctrl_regs *clkctrl_regs =
+ (struct mx28_clkctrl_regs *)MXS_CLKCTRL_BASE;
+ uint32_t div;
+
+ if (freq == 0)
+ return;
+
+ if (io > MXC_IOCLK1)
+ return;
+
+ div = (PLL_FREQ_KHZ * PLL_FREQ_COEF) / freq;
+
+ if (div < 18)
+ div = 18;
+
+ if (div > 35)
+ div = 35;
+
+ if (io == MXC_IOCLK0) {
+ writel(CLKCTRL_FRAC0_CLKGATEIO0,
+ &clkctrl_regs->hw_clkctrl_frac0_set);
+ clrsetbits_le32(&clkctrl_regs->hw_clkctrl_frac0,
+ CLKCTRL_FRAC0_IO0FRAC_MASK,
+ div << CLKCTRL_FRAC0_IO0FRAC_OFFSET);
+ writel(CLKCTRL_FRAC0_CLKGATEIO0,
+ &clkctrl_regs->hw_clkctrl_frac0_clr);
+ } else {
+ writel(CLKCTRL_FRAC0_CLKGATEIO1,
+ &clkctrl_regs->hw_clkctrl_frac0_set);
+ clrsetbits_le32(&clkctrl_regs->hw_clkctrl_frac0,
+ CLKCTRL_FRAC0_IO1FRAC_MASK,
+ div << CLKCTRL_FRAC0_IO1FRAC_OFFSET);
+ writel(CLKCTRL_FRAC0_CLKGATEIO1,
+ &clkctrl_regs->hw_clkctrl_frac0_clr);
+ }
+}
+
+/*
+ * Get IO clock, returns IO clock in kHz
+ */
+static uint32_t mx28_get_ioclk(enum mxs_ioclock io)
+{
+ struct mx28_clkctrl_regs *clkctrl_regs =
+ (struct mx28_clkctrl_regs *)MXS_CLKCTRL_BASE;
+ uint32_t tmp, ret;
+
+ if (io > MXC_IOCLK1)
+ return 0;
+
+ tmp = readl(&clkctrl_regs->hw_clkctrl_frac0);
+
+ if (io == MXC_IOCLK0)
+ ret = (tmp & CLKCTRL_FRAC0_IO0FRAC_MASK) >>
+ CLKCTRL_FRAC0_IO0FRAC_OFFSET;
+ else
+ ret = (tmp & CLKCTRL_FRAC0_IO1FRAC_MASK) >>
+ CLKCTRL_FRAC0_IO1FRAC_OFFSET;
+
+ return (PLL_FREQ_KHZ * PLL_FREQ_COEF) / ret;
+}
+
+/*
+ * Configure SSP clock frequency, in kHz
+ */
+void mx28_set_sspclk(enum mxs_sspclock ssp, uint32_t freq, int xtal)
+{
+ struct mx28_clkctrl_regs *clkctrl_regs =
+ (struct mx28_clkctrl_regs *)MXS_CLKCTRL_BASE;
+ uint32_t clk, clkreg;
+
+ if (ssp > MXC_SSPCLK3)
+ return;
+
+ clkreg = (uint32_t)(&clkctrl_regs->hw_clkctrl_ssp0) +
+ (ssp * sizeof(struct mx28_register));
+
+ clrbits_le32(clkreg, CLKCTRL_SSP_CLKGATE);
+ while (readl(clkreg) & CLKCTRL_SSP_CLKGATE)
+ ;
+
+ if (xtal)
+ clk = XTAL_FREQ_KHZ;
+ else
+ clk = mx28_get_ioclk(ssp >> 1);
+
+ if (freq > clk)
+ return;
+
+ /* Calculate the divider and cap it if necessary */
+ clk /= freq;
+ if (clk > CLKCTRL_SSP_DIV_MASK)
+ clk = CLKCTRL_SSP_DIV_MASK;
+
+ clrsetbits_le32(clkreg, CLKCTRL_SSP_DIV_MASK, clk);
+ while (readl(clkreg) & CLKCTRL_SSP_BUSY)
+ ;
+
+ if (xtal)
+ writel(CLKCTRL_CLKSEQ_BYPASS_SSP0 << ssp,
+ &clkctrl_regs->hw_clkctrl_clkseq_set);
+ else
+ writel(CLKCTRL_CLKSEQ_BYPASS_SSP0 << ssp,
+ &clkctrl_regs->hw_clkctrl_clkseq_clr);
+}
+
+/*
+ * Return SSP frequency, in kHz
+ */
+static uint32_t mx28_get_sspclk(enum mxs_sspclock ssp)
+{
+ struct mx28_clkctrl_regs *clkctrl_regs =
+ (struct mx28_clkctrl_regs *)MXS_CLKCTRL_BASE;
+ uint32_t clkreg;
+ uint32_t clk, tmp;
+
+ if (ssp > MXC_SSPCLK3)
+ return 0;
+
+ tmp = readl(&clkctrl_regs->hw_clkctrl_clkseq);
+ if (tmp & (CLKCTRL_CLKSEQ_BYPASS_SSP0 << ssp))
+ return XTAL_FREQ_KHZ;
+
+ clkreg = (uint32_t)(&clkctrl_regs->hw_clkctrl_ssp0) +
+ (ssp * sizeof(struct mx28_register));
+
+ tmp = readl(clkreg) & CLKCTRL_SSP_DIV_MASK;
+
+ if (tmp == 0)
+ return 0;
+
+ clk = mx28_get_ioclk(ssp >> 1);
+
+ return clk / tmp;
+}
+
+/*
+ * Set SSP/MMC bus frequency, in kHz)
+ */
+void mx28_set_ssp_busclock(unsigned int bus, uint32_t freq)
+{
+ struct mx28_ssp_regs *ssp_regs;
+ const uint32_t sspclk = mx28_get_sspclk(bus);
+ uint32_t reg;
+ uint32_t divide, rate, tgtclk;
+
+ ssp_regs = (struct mx28_ssp_regs *)(MXS_SSP0_BASE + (bus * 0x2000));
+
+ /*
+ * SSP bit rate = SSPCLK / (CLOCK_DIVIDE * (1 + CLOCK_RATE)),
+ * CLOCK_DIVIDE has to be an even value from 2 to 254, and
+ * CLOCK_RATE could be any integer from 0 to 255.
+ */
+ for (divide = 2; divide < 254; divide += 2) {
+ rate = sspclk / freq / divide;
+ if (rate <= 256)
+ break;
+ }
+
+ tgtclk = sspclk / divide / rate;
+ while (tgtclk > freq) {
+ rate++;
+ tgtclk = sspclk / divide / rate;
+ }
+ if (rate > 256)
+ rate = 256;
+
+ /* Always set timeout the maximum */
+ reg = SSP_TIMING_TIMEOUT_MASK |
+ (divide << SSP_TIMING_CLOCK_DIVIDE_OFFSET) |
+ ((rate - 1) << SSP_TIMING_CLOCK_RATE_OFFSET);
+ writel(reg, &ssp_regs->hw_ssp_timing);
+
+ debug("SPI%d: Set freq rate to %d KHz (requested %d KHz)\n",
+ bus, tgtclk, freq);
+}
+
+uint32_t mxc_get_clock(enum mxc_clock clk)
+{
+ switch (clk) {
+ case MXC_ARM_CLK:
+ return mx28_get_pclk() * 1000000;
+ case MXC_GPMI_CLK:
+ return mx28_get_gpmiclk() * 1000000;
+ case MXC_AHB_CLK:
+ case MXC_IPG_CLK:
+ return mx28_get_hclk() * 1000000;
+ case MXC_EMI_CLK:
+ return mx28_get_emiclk();
+ case MXC_IO0_CLK:
+ return mx28_get_ioclk(MXC_IOCLK0);
+ case MXC_IO1_CLK:
+ return mx28_get_ioclk(MXC_IOCLK1);
+ case MXC_SSP0_CLK:
+ return mx28_get_sspclk(MXC_SSPCLK0);
+ case MXC_SSP1_CLK:
+ return mx28_get_sspclk(MXC_SSPCLK1);
+ case MXC_SSP2_CLK:
+ return mx28_get_sspclk(MXC_SSPCLK2);
+ case MXC_SSP3_CLK:
+ return mx28_get_sspclk(MXC_SSPCLK3);
+ }
+
+ return 0;
+}
diff --git a/arch/arm/cpu/arm926ejs/mx28/mx28.c b/arch/arm/cpu/arm926ejs/mx28/mx28.c
new file mode 100644
index 0000000..446ea8b
--- /dev/null
+++ b/arch/arm/cpu/arm926ejs/mx28/mx28.c
@@ -0,0 +1,193 @@
+/*
+ * Freescale i.MX28 common code
+ *
+ * Copyright (C) 2011 Marek Vasut <marek.vasut at gmail.com>
+ * on behalf of DENX Software Engineering GmbH
+ *
+ * Based on code from LTIB:
+ * Copyright (C) 2010 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/errno.h>
+#include <asm/io.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/imx-regs.h>
+#include <asm/arch/sys_proto.h>
+
+/* 1 second delay should be plenty of time for block reset. */
+#define RESET_MAX_TIMEOUT 1000000
+
+#define MX28_BLOCK_SFTRST (1 << 31)
+#define MX28_BLOCK_CLKGATE (1 << 30)
+
+/* Lowlevel init isn't used on i.MX28, so just have a dummy here */
+inline void lowlevel_init(void) {}
+
+void reset_cpu(ulong ignored) __attribute__((noreturn));
+
+void reset_cpu(ulong ignored)
+{
+
+ struct mx28_rtc_regs *rtc_regs =
+ (struct mx28_rtc_regs *)MXS_RTC_BASE;
+
+ /* Wait 1 uS before doing the actual watchdog reset */
+ writel(1, &rtc_regs->hw_rtc_watchdog);
+ writel(RTC_CTRL_WATCHDOGEN, &rtc_regs->hw_rtc_ctrl_set);
+
+ /* Endless loop, reset will exit from here */
+ for (;;)
+ ;
+}
+
+int mx28_wait_mask_set(struct mx28_register *reg, uint32_t mask, int timeout)
+{
+ while (--timeout) {
+ if ((readl(®->reg) & mask) == mask)
+ break;
+ udelay(1);
+ }
+
+ return !timeout;
+}
+
+int mx28_wait_mask_clr(struct mx28_register *reg, uint32_t mask, int timeout)
+{
+ while (--timeout) {
+ if ((readl(®->reg) & mask) == 0)
+ break;
+ udelay(1);
+ }
+
+ return !timeout;
+}
+
+int mx28_reset_block(struct mx28_register *reg)
+{
+ /* Clear SFTRST */
+ writel(MX28_BLOCK_SFTRST, ®->reg_clr);
+
+ if (mx28_wait_mask_clr(reg, MX28_BLOCK_SFTRST, RESET_MAX_TIMEOUT))
+ return 1;
+
+ /* Clear CLKGATE */
+ writel(MX28_BLOCK_CLKGATE, ®->reg_clr);
+
+ /* Set SFTRST */
+ writel(MX28_BLOCK_SFTRST, ®->reg_set);
+
+ /* Wait for CLKGATE being set */
+ if (mx28_wait_mask_set(reg, MX28_BLOCK_CLKGATE, RESET_MAX_TIMEOUT))
+ return 1;
+
+ /* Clear SFTRST */
+ writel(MX28_BLOCK_SFTRST, ®->reg_clr);
+
+ if (mx28_wait_mask_clr(reg, MX28_BLOCK_SFTRST, RESET_MAX_TIMEOUT))
+ return 1;
+
+ /* Clear CLKGATE */
+ writel(MX28_BLOCK_CLKGATE, ®->reg_clr);
+
+ if (mx28_wait_mask_clr(reg, MX28_BLOCK_CLKGATE, RESET_MAX_TIMEOUT))
+ return 1;
+
+ return 0;
+}
+
+#ifdef CONFIG_ARCH_CPU_INIT
+int arch_cpu_init(void)
+{
+ struct mx28_clkctrl_regs *clkctrl_regs =
+ (struct mx28_clkctrl_regs *)MXS_CLKCTRL_BASE;
+
+ /*
+ * Enable NAND clock
+ */
+ /* Clear bypass bit */
+ writel(CLKCTRL_CLKSEQ_BYPASS_GPMI,
+ &clkctrl_regs->hw_clkctrl_clkseq_set);
+
+ /* Set GPMI clock to ref_gpmi / 12 */
+ clrsetbits_le32(&clkctrl_regs->hw_clkctrl_gpmi,
+ CLKCTRL_GPMI_CLKGATE | CLKCTRL_GPMI_DIV_MASK, 1);
+
+ udelay(1000);
+
+ return 0;
+}
+#endif
+
+#if defined(CONFIG_DISPLAY_CPUINFO)
+int print_cpuinfo(void)
+{
+ printf("Freescale i.MX28 family\n");
+ return 0;
+}
+#endif
+
+int do_mx28_showclocks(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[])
+{
+ printf("CPU: %3d MHz\n", mxc_get_clock(MXC_ARM_CLK) / 1000000);
+ printf("BUS: %3d MHz\n", mxc_get_clock(MXC_AHB_CLK) / 1000000);
+ printf("EMI: %3d MHz\n", mxc_get_clock(MXC_EMI_CLK));
+ printf("GPMI: %3d MHz\n", mxc_get_clock(MXC_GPMI_CLK) / 1000000);
+ return 0;
+}
+
+/*
+ * Initializes on-chip ethernet controllers.
+ */
+#ifdef CONFIG_CMD_NET
+int cpu_eth_init(bd_t *bis)
+{
+ struct mx28_clkctrl_regs *clkctrl_regs =
+ (struct mx28_clkctrl_regs *)MXS_CLKCTRL_BASE;
+
+ /* Turn on ENET clocks */
+ clrbits_le32(&clkctrl_regs->hw_clkctrl_enet,
+ CLKCTRL_ENET_SLEEP | CLKCTRL_ENET_DISABLE);
+
+ /* Set up ENET PLL for 50 MHz */
+ /* Power on ENET PLL */
+ writel(CLKCTRL_PLL2CTRL0_POWER,
+ &clkctrl_regs->hw_clkctrl_pll2ctrl0_set);
+
+ udelay(10);
+
+ /* Gate on ENET PLL */
+ writel(CLKCTRL_PLL2CTRL0_CLKGATE,
+ &clkctrl_regs->hw_clkctrl_pll2ctrl0_clr);
+
+ /* Enable pad output */
+ setbits_le32(&clkctrl_regs->hw_clkctrl_enet, CLKCTRL_ENET_CLK_OUT_EN);
+
+ return 0;
+}
+#endif
+
+U_BOOT_CMD(
+ clocks, CONFIG_SYS_MAXARGS, 1, do_mx28_showclocks,
+ "display clocks",
+ ""
+);
diff --git a/arch/arm/cpu/arm926ejs/mx28/timer.c b/arch/arm/cpu/arm926ejs/mx28/timer.c
new file mode 100644
index 0000000..dbc904d
--- /dev/null
+++ b/arch/arm/cpu/arm926ejs/mx28/timer.c
@@ -0,0 +1,141 @@
+/*
+ * Freescale i.MX28 timer driver
+ *
+ * Copyright (C) 2011 Marek Vasut <marek.vasut at gmail.com>
+ * on behalf of DENX Software Engineering GmbH
+ *
+ * Based on code from LTIB:
+ * (C) Copyright 2009-2010 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/imx-regs.h>
+#include <asm/arch/sys_proto.h>
+
+/* Maximum fixed count */
+#define TIMER_LOAD_VAL 0xffffffff
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define timestamp (gd->tbl)
+#define lastdec (gd->lastinc)
+
+/*
+ * This driver uses 1kHz clock source.
+ */
+#define MX28_INCREMENTER_HZ 1000
+
+static inline unsigned long tick_to_time(unsigned long tick)
+{
+ return tick / (MX28_INCREMENTER_HZ / CONFIG_SYS_HZ);
+}
+
+static inline unsigned long time_to_tick(unsigned long time)
+{
+ return time * (MX28_INCREMENTER_HZ / CONFIG_SYS_HZ);
+}
+
+/* Calculate how many ticks happen in "us" microseconds */
+static inline unsigned long us_to_tick(unsigned long us)
+{
+ return (us * MX28_INCREMENTER_HZ) / 1000000;
+}
+
+int timer_init(void)
+{
+ struct mx28_timrot_regs *timrot_regs =
+ (struct mx28_timrot_regs *)MXS_TIMROT_BASE;
+
+ /* Reset Timers and Rotary Encoder module */
+ mx28_reset_block(&timrot_regs->hw_timrot_rotctrl_reg);
+
+ /* Set fixed_count to 0 */
+ writel(0, &timrot_regs->hw_timrot_fixed_count0);
+
+ /* Set UPDATE bit and 1Khz frequency */
+ writel(TIMROT_TIMCTRLn_UPDATE | TIMROT_TIMCTRLn_RELOAD |
+ TIMROT_TIMCTRLn_SELECT_1KHZ_XTAL,
+ &timrot_regs->hw_timrot_timctrl0);
+
+ /* Set fixed_count to maximal value */
+ writel(TIMER_LOAD_VAL, &timrot_regs->hw_timrot_fixed_count0);
+
+ return 0;
+}
+
+ulong get_timer(ulong base)
+{
+ struct mx28_timrot_regs *timrot_regs =
+ (struct mx28_timrot_regs *)MXS_TIMROT_BASE;
+
+ /* Current tick value */
+ uint32_t now = readl(&timrot_regs->hw_timrot_running_count0);
+
+ if (lastdec >= now) {
+ /*
+ * normal mode (non roll)
+ * move stamp forward with absolut diff ticks
+ */
+ timestamp += (lastdec - now);
+ } else {
+ /* we have rollover of decrementer */
+ timestamp += (TIMER_LOAD_VAL - now) + lastdec;
+
+ }
+ lastdec = now;
+
+ return tick_to_time(timestamp) - base;
+}
+
+/* We use the HW_DIGCTL_MICROSECONDS register for sub-millisecond timer. */
+#define MX28_HW_DIGCTL_MICROSECONDS 0x8001c0c0
+
+void __udelay(unsigned long usec)
+{
+ uint32_t old, new, incr;
+ uint32_t counter = 0;
+
+ old = readl(MX28_HW_DIGCTL_MICROSECONDS);
+
+ while (counter < usec) {
+ new = readl(MX28_HW_DIGCTL_MICROSECONDS);
+
+ /* Check if the timer wrapped. */
+ if (new < old) {
+ incr = 0xffffffff - old;
+ incr += new;
+ } else {
+ incr = new - old;
+ }
+
+ /*
+ * Check if we are close to the maximum time and the counter
+ * would wrap if incremented. If that's the case, break out
+ * from the loop as the requested delay time passed.
+ */
+ if (counter + incr < counter)
+ break;
+
+ counter += incr;
+ old = new;
+ }
+}
diff --git a/arch/arm/include/asm/arch-mx28/clock.h b/arch/arm/include/asm/arch-mx28/clock.h
new file mode 100644
index 0000000..1700fe3
--- /dev/null
+++ b/arch/arm/include/asm/arch-mx28/clock.h
@@ -0,0 +1,61 @@
+/*
+ * Freescale i.MX28 Clock
+ *
+ * Copyright (C) 2011 Marek Vasut <marek.vasut at gmail.com>
+ * on behalf of DENX Software Engineering GmbH
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#ifndef __CLOCK_H__
+#define __CLOCK_H__
+
+enum mxc_clock {
+ MXC_ARM_CLK = 0,
+ MXC_AHB_CLK,
+ MXC_IPG_CLK,
+ MXC_EMI_CLK,
+ MXC_GPMI_CLK,
+ MXC_IO0_CLK,
+ MXC_IO1_CLK,
+ MXC_SSP0_CLK,
+ MXC_SSP1_CLK,
+ MXC_SSP2_CLK,
+ MXC_SSP3_CLK,
+};
+
+enum mxs_ioclock {
+ MXC_IOCLK0 = 0,
+ MXC_IOCLK1,
+};
+
+enum mxs_sspclock {
+ MXC_SSPCLK0 = 0,
+ MXC_SSPCLK1,
+ MXC_SSPCLK2,
+ MXC_SSPCLK3,
+};
+
+uint32_t mxc_get_clock(enum mxc_clock clk);
+
+void mx28_set_ioclk(enum mxs_ioclock io, uint32_t freq);
+void mx28_set_sspclk(enum mxs_sspclock ssp, uint32_t freq, int xtal);
+void mx28_set_ssp_busclock(unsigned int bus, uint32_t freq);
+
+/* Compatibility with the FEC Ethernet driver */
+#define imx_get_fecclk() mxc_get_clock(MXC_AHB_CLK)
+
+#endif /* __CLOCK_H__ */
diff --git a/arch/arm/include/asm/arch-mx28/imx-regs.h b/arch/arm/include/asm/arch-mx28/imx-regs.h
new file mode 100644
index 0000000..32bfd7e
--- /dev/null
+++ b/arch/arm/include/asm/arch-mx28/imx-regs.h
@@ -0,0 +1,38 @@
+/*
+ * Freescale i.MX28 Registers
+ *
+ * Copyright (C) 2011 Marek Vasut <marek.vasut at gmail.com>
+ * on behalf of DENX Software Engineering GmbH
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#ifndef __IMX_REGS_H__
+#define __IMX_REGS_H__
+
+#include <asm/arch/regs-base.h>
+#include <asm/arch/regs-bch.h>
+#include <asm/arch/regs-clkctrl.h>
+#include <asm/arch/regs-gpmi.h>
+#include <asm/arch/regs-i2c.h>
+#include <asm/arch/regs-ocotp.h>
+#include <asm/arch/regs-pinctrl.h>
+#include <asm/arch/regs-power.h>
+#include <asm/arch/regs-rtc.h>
+#include <asm/arch/regs-ssp.h>
+#include <asm/arch/regs-timrot.h>
+
+#endif /* __IMX_REGS_H__ */
diff --git a/arch/arm/include/asm/arch-mx28/regs-base.h b/arch/arm/include/asm/arch-mx28/regs-base.h
new file mode 100644
index 0000000..dbdcc2b
--- /dev/null
+++ b/arch/arm/include/asm/arch-mx28/regs-base.h
@@ -0,0 +1,88 @@
+/*
+ * Freescale i.MX28 Peripheral Base Addresses
+ *
+ * Copyright (C) 2011 Marek Vasut <marek.vasut at gmail.com>
+ * on behalf of DENX Software Engineering GmbH
+ *
+ * Based on code from LTIB:
+ * Copyright (C) 2008 Embedded Alley Solutions Inc.
+ *
+ * (C) Copyright 2009-2010 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#ifndef __MX28_REGS_BASE_H__
+#define __MX28_REGS_BASE_H__
+
+/*
+ * Register base address
+ */
+#define MXS_ICOL_BASE 0x80000000
+#define MXS_HSADC_BASE 0x80002000
+#define MXS_APBH_BASE 0x80004000
+#define MXS_PERFMON_BASE 0x80006000
+#define MXS_BCH_BASE 0x8000A000
+#define MXS_GPMI_BASE 0x8000C000
+#define MXS_SSP0_BASE 0x80010000
+#define MXS_SSP1_BASE 0x80012000
+#define MXS_SSP2_BASE 0x80014000
+#define MXS_SSP3_BASE 0x80016000
+#define MXS_PINCTRL_BASE 0x80018000
+#define MXS_DIGCTL_BASE 0x8001C000
+#define MXS_ETM_BASE 0x80022000
+#define MXS_APBX_BASE 0x80024000
+#define MXS_DCP_BASE 0x80028000
+#define MXS_PXP_BASE 0x8002A000
+#define MXS_OCOTP_BASE 0x8002C000
+#define MXS_AXI_AHB0_BASE 0x8002E000
+#define MXS_LCDIF_BASE 0x80030000
+#define MXS_CAN0_BASE 0x80032000
+#define MXS_CAN1_BASE 0x80034000
+#define MXS_SIMDBG_BASE 0x8003C000
+#define MXS_SIMGPMISEL_BASE 0x8003C200
+#define MXS_SIMSSPSEL_BASE 0x8003C300
+#define MXS_SIMMEMSEL_BASE 0x8003C400
+#define MXS_GPIOMON_BASE 0x8003C500
+#define MXS_SIMENET_BASE 0x8003C700
+#define MXS_ARMJTAG_BASE 0x8003C800
+#define MXS_CLKCTRL_BASE 0x80040000
+#define MXS_SAIF0_BASE 0x80042000
+#define MXS_POWER_BASE 0x80044000
+#define MXS_SAIF1_BASE 0x80046000
+#define MXS_LRADC_BASE 0x80050000
+#define MXS_SPDIF_BASE 0x80054000
+#define MXS_RTC_BASE 0x80056000
+#define MXS_I2C0_BASE 0x80058000
+#define MXS_I2C1_BASE 0x8005A000
+#define MXS_PWM_BASE 0x80064000
+#define MXS_TIMROT_BASE 0x80068000
+#define MXS_UARTAPP0_BASE 0x8006A000
+#define MXS_UARTAPP1_BASE 0x8006C000
+#define MXS_UARTAPP2_BASE 0x8006E000
+#define MXS_UARTAPP3_BASE 0x80070000
+#define MXS_UARTAPP4_BASE 0x80072000
+#define MXS_UARTDBG_BASE 0x80074000
+#define MXS_USBPHY0_BASE 0x8007C000
+#define MXS_USBPHY1_BASE 0x8007E000
+#define MXS_USBCTRL0_BASE 0x80080000
+#define MXS_USBCTRL1_BASE 0x80090000
+#define MXS_DFLPT_BASE 0x800C0000
+#define MXS_DRAM_BASE 0x800E0000
+#define MXS_ENET0_BASE 0x800F0000
+#define MXS_ENET1_BASE 0x800F4000
+
+#endif /* __MX28_REGS_BASE_H__ */
diff --git a/arch/arm/include/asm/arch-mx28/regs-bch.h b/arch/arm/include/asm/arch-mx28/regs-bch.h
new file mode 100644
index 0000000..cac0470
--- /dev/null
+++ b/arch/arm/include/asm/arch-mx28/regs-bch.h
@@ -0,0 +1,230 @@
+/*
+ * Freescale i.MX28 BCH Register Definitions
+ *
+ * Copyright (C) 2011 Marek Vasut <marek.vasut at gmail.com>
+ * on behalf of DENX Software Engineering GmbH
+ *
+ * Based on code from LTIB:
+ * Copyright 2008-2010 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#ifndef __MX28_REGS_BCH_H__
+#define __MX28_REGS_BCH_H__
+
+#include <asm/arch/regs-common.h>
+
+#ifndef __ASSEMBLY__
+struct mx28_bch_regs {
+ mx28_reg(hw_bch_ctrl)
+ mx28_reg(hw_bch_status0)
+ mx28_reg(hw_bch_mode)
+ mx28_reg(hw_bch_encodeptr)
+ mx28_reg(hw_bch_dataptr)
+ mx28_reg(hw_bch_metaptr)
+
+ uint32_t reserved[4];
+
+ mx28_reg(hw_bch_layoutselect)
+ mx28_reg(hw_bch_flash0layout0)
+ mx28_reg(hw_bch_flash0layout1)
+ mx28_reg(hw_bch_flash1layout0)
+ mx28_reg(hw_bch_flash1layout1)
+ mx28_reg(hw_bch_flash2layout0)
+ mx28_reg(hw_bch_flash2layout1)
+ mx28_reg(hw_bch_flash3layout0)
+ mx28_reg(hw_bch_flash3layout1)
+ mx28_reg(hw_bch_dbgkesread)
+ mx28_reg(hw_bch_dbgcsferead)
+ mx28_reg(hw_bch_dbgsyndegread)
+ mx28_reg(hw_bch_dbgahbmread)
+ mx28_reg(hw_bch_blockname)
+ mx28_reg(hw_bch_version)
+};
+#endif
+
+#define BCH_CTRL_SFTRST (1 << 31)
+#define BCH_CTRL_CLKGATE (1 << 30)
+#define BCH_CTRL_DEBUGSYNDROME (1 << 22)
+#define BCH_CTRL_M2M_LAYOUT_MASK (0x3 << 18)
+#define BCH_CTRL_M2M_LAYOUT_OFFSET 18
+#define BCH_CTRL_M2M_ENCODE (1 << 17)
+#define BCH_CTRL_M2M_ENABLE (1 << 16)
+#define BCH_CTRL_DEBUG_STALL_IRQ_EN (1 << 10)
+#define BCH_CTRL_COMPLETE_IRQ_EN (1 << 8)
+#define BCH_CTRL_BM_ERROR_IRQ (1 << 3)
+#define BCH_CTRL_DEBUG_STALL_IRQ (1 << 2)
+#define BCH_CTRL_COMPLETE_IRQ (1 << 0)
+
+#define BCH_STATUS0_HANDLE_MASK (0xfff << 20)
+#define BCH_STATUS0_HANDLE_OFFSET 20
+#define BCH_STATUS0_COMPLETED_CE_MASK (0xf << 16)
+#define BCH_STATUS0_COMPLETED_CE_OFFSET 16
+#define BCH_STATUS0_STATUS_BLK0_MASK (0xff << 8)
+#define BCH_STATUS0_STATUS_BLK0_OFFSET 8
+#define BCH_STATUS0_STATUS_BLK0_ZERO (0x00 << 8)
+#define BCH_STATUS0_STATUS_BLK0_ERROR1 (0x01 << 8)
+#define BCH_STATUS0_STATUS_BLK0_ERROR2 (0x02 << 8)
+#define BCH_STATUS0_STATUS_BLK0_ERROR3 (0x03 << 8)
+#define BCH_STATUS0_STATUS_BLK0_ERROR4 (0x04 << 8)
+#define BCH_STATUS0_STATUS_BLK0_UNCORRECTABLE (0xfe << 8)
+#define BCH_STATUS0_STATUS_BLK0_ERASED (0xff << 8)
+#define BCH_STATUS0_ALLONES (1 << 4)
+#define BCH_STATUS0_CORRECTED (1 << 3)
+#define BCH_STATUS0_UNCORRECTABLE (1 << 2)
+
+#define BCH_MODE_ERASE_THRESHOLD_MASK 0xff
+#define BCH_MODE_ERASE_THRESHOLD_OFFSET 0
+
+#define BCH_ENCODEPTR_ADDR_MASK 0xffffffff
+#define BCH_ENCODEPTR_ADDR_OFFSET 0
+
+#define BCH_DATAPTR_ADDR_MASK 0xffffffff
+#define BCH_DATAPTR_ADDR_OFFSET 0
+
+#define BCH_METAPTR_ADDR_MASK 0xffffffff
+#define BCH_METAPTR_ADDR_OFFSET 0
+
+#define BCH_LAYOUTSELECT_CS15_SELECT_MASK (0x3 << 30)
+#define BCH_LAYOUTSELECT_CS15_SELECT_OFFSET 30
+#define BCH_LAYOUTSELECT_CS14_SELECT_MASK (0x3 << 28)
+#define BCH_LAYOUTSELECT_CS14_SELECT_OFFSET 28
+#define BCH_LAYOUTSELECT_CS13_SELECT_MASK (0x3 << 26)
+#define BCH_LAYOUTSELECT_CS13_SELECT_OFFSET 26
+#define BCH_LAYOUTSELECT_CS12_SELECT_MASK (0x3 << 24)
+#define BCH_LAYOUTSELECT_CS12_SELECT_OFFSET 24
+#define BCH_LAYOUTSELECT_CS11_SELECT_MASK (0x3 << 22)
+#define BCH_LAYOUTSELECT_CS11_SELECT_OFFSET 22
+#define BCH_LAYOUTSELECT_CS10_SELECT_MASK (0x3 << 20)
+#define BCH_LAYOUTSELECT_CS10_SELECT_OFFSET 20
+#define BCH_LAYOUTSELECT_CS9_SELECT_MASK (0x3 << 18)
+#define BCH_LAYOUTSELECT_CS9_SELECT_OFFSET 18
+#define BCH_LAYOUTSELECT_CS8_SELECT_MASK (0x3 << 16)
+#define BCH_LAYOUTSELECT_CS8_SELECT_OFFSET 16
+#define BCH_LAYOUTSELECT_CS7_SELECT_MASK (0x3 << 14)
+#define BCH_LAYOUTSELECT_CS7_SELECT_OFFSET 14
+#define BCH_LAYOUTSELECT_CS6_SELECT_MASK (0x3 << 12)
+#define BCH_LAYOUTSELECT_CS6_SELECT_OFFSET 12
+#define BCH_LAYOUTSELECT_CS5_SELECT_MASK (0x3 << 10)
+#define BCH_LAYOUTSELECT_CS5_SELECT_OFFSET 10
+#define BCH_LAYOUTSELECT_CS4_SELECT_MASK (0x3 << 8)
+#define BCH_LAYOUTSELECT_CS4_SELECT_OFFSET 8
+#define BCH_LAYOUTSELECT_CS3_SELECT_MASK (0x3 << 6)
+#define BCH_LAYOUTSELECT_CS3_SELECT_OFFSET 6
+#define BCH_LAYOUTSELECT_CS2_SELECT_MASK (0x3 << 4)
+#define BCH_LAYOUTSELECT_CS2_SELECT_OFFSET 4
+#define BCH_LAYOUTSELECT_CS1_SELECT_MASK (0x3 << 2)
+#define BCH_LAYOUTSELECT_CS1_SELECT_OFFSET 2
+#define BCH_LAYOUTSELECT_CS0_SELECT_MASK (0x3 << 0)
+#define BCH_LAYOUTSELECT_CS0_SELECT_OFFSET 0
+
+#define BCH_FLASHLAYOUT0_NBLOCKS_MASK (0xff << 24)
+#define BCH_FLASHLAYOUT0_NBLOCKS_OFFSET 24
+#define BCH_FLASHLAYOUT0_META_SIZE_MASK (0xff << 16)
+#define BCH_FLASHLAYOUT0_META_SIZE_OFFSET 16
+#define BCH_FLASHLAYOUT0_ECC0_MASK (0xf << 12)
+#define BCH_FLASHLAYOUT0_ECC0_OFFSET 12
+#define BCH_FLASHLAYOUT0_ECC0_NONE (0x0 << 12)
+#define BCH_FLASHLAYOUT0_ECC0_ECC2 (0x1 << 12)
+#define BCH_FLASHLAYOUT0_ECC0_ECC4 (0x2 << 12)
+#define BCH_FLASHLAYOUT0_ECC0_ECC6 (0x3 << 12)
+#define BCH_FLASHLAYOUT0_ECC0_ECC8 (0x4 << 12)
+#define BCH_FLASHLAYOUT0_ECC0_ECC10 (0x5 << 12)
+#define BCH_FLASHLAYOUT0_ECC0_ECC12 (0x6 << 12)
+#define BCH_FLASHLAYOUT0_ECC0_ECC14 (0x7 << 12)
+#define BCH_FLASHLAYOUT0_ECC0_ECC16 (0x8 << 12)
+#define BCH_FLASHLAYOUT0_ECC0_ECC18 (0x9 << 12)
+#define BCH_FLASHLAYOUT0_ECC0_ECC20 (0xa << 12)
+#define BCH_FLASHLAYOUT0_ECC0_ECC22 (0xb << 12)
+#define BCH_FLASHLAYOUT0_ECC0_ECC24 (0xc << 12)
+#define BCH_FLASHLAYOUT0_ECC0_ECC26 (0xd << 12)
+#define BCH_FLASHLAYOUT0_ECC0_ECC28 (0xe << 12)
+#define BCH_FLASHLAYOUT0_ECC0_ECC30 (0xf << 12)
+#define BCH_FLASHLAYOUT0_ECC0_ECC32 (0x10 << 12)
+#define BCH_FLASHLAYOUT0_GF13_0_GF14_1 (1 << 10)
+#define BCH_FLASHLAYOUT0_DATA0_SIZE_MASK 0xfff
+#define BCH_FLASHLAYOUT0_DATA0_SIZE_OFFSET 0
+
+#define BCH_FLASHLAYOUT1_PAGE_SIZE_MASK (0xffff << 16)
+#define BCH_FLASHLAYOUT1_PAGE_SIZE_OFFSET 16
+#define BCH_FLASHLAYOUT1_ECCN_MASK (0xf << 12)
+#define BCH_FLASHLAYOUT1_ECCN_OFFSET 12
+#define BCH_FLASHLAYOUT1_ECCN_NONE (0x0 << 12)
+#define BCH_FLASHLAYOUT1_ECCN_ECC2 (0x1 << 12)
+#define BCH_FLASHLAYOUT1_ECCN_ECC4 (0x2 << 12)
+#define BCH_FLASHLAYOUT1_ECCN_ECC6 (0x3 << 12)
+#define BCH_FLASHLAYOUT1_ECCN_ECC8 (0x4 << 12)
+#define BCH_FLASHLAYOUT1_ECCN_ECC10 (0x5 << 12)
+#define BCH_FLASHLAYOUT1_ECCN_ECC12 (0x6 << 12)
+#define BCH_FLASHLAYOUT1_ECCN_ECC14 (0x7 << 12)
+#define BCH_FLASHLAYOUT1_ECCN_ECC16 (0x8 << 12)
+#define BCH_FLASHLAYOUT1_ECCN_ECC18 (0x9 << 12)
+#define BCH_FLASHLAYOUT1_ECCN_ECC20 (0xa << 12)
+#define BCH_FLASHLAYOUT1_ECCN_ECC22 (0xb << 12)
+#define BCH_FLASHLAYOUT1_ECCN_ECC24 (0xc << 12)
+#define BCH_FLASHLAYOUT1_ECCN_ECC26 (0xd << 12)
+#define BCH_FLASHLAYOUT1_ECCN_ECC28 (0xe << 12)
+#define BCH_FLASHLAYOUT1_ECCN_ECC30 (0xf << 12)
+#define BCH_FLASHLAYOUT1_ECCN_ECC32 (0x10 << 12)
+#define BCH_FLASHLAYOUT1_GF13_0_GF14_1 (1 << 10)
+#define BCH_FLASHLAYOUT1_DATAN_SIZE_MASK 0xfff
+#define BCH_FLASHLAYOUT1_DATAN_SIZE_OFFSET 0
+
+#define BCH_DEBUG0_RSVD1_MASK (0x1f << 27)
+#define BCH_DEBUG0_RSVD1_OFFSET 27
+#define BCH_DEBUG0_ROM_BIST_ENABLE (1 << 26)
+#define BCH_DEBUG0_ROM_BIST_COMPLETE (1 << 25)
+#define BCH_DEBUG0_KES_DEBUG_SYNDROME_SYMBOL_MASK (0x1ff << 16)
+#define BCH_DEBUG0_KES_DEBUG_SYNDROME_SYMBOL_OFFSET 16
+#define BCH_DEBUG0_KES_DEBUG_SYNDROME_SYMBOL_NORMAL (0x0 << 16)
+#define BCH_DEBUG0_KES_DEBUG_SYNDROME_SYMBOL_TEST_MODE (0x1 << 16)
+#define BCH_DEBUG0_KES_DEBUG_SHIFT_SYND (1 << 15)
+#define BCH_DEBUG0_KES_DEBUG_PAYLOAD_FLAG (1 << 14)
+#define BCH_DEBUG0_KES_DEBUG_MODE4K (1 << 13)
+#define BCH_DEBUG0_KES_DEBUG_KICK (1 << 12)
+#define BCH_DEBUG0_KES_STANDALONE (1 << 11)
+#define BCH_DEBUG0_KES_DEBUG_STEP (1 << 10)
+#define BCH_DEBUG0_KES_DEBUG_STALL (1 << 9)
+#define BCH_DEBUG0_BM_KES_TEST_BYPASS (1 << 8)
+#define BCH_DEBUG0_RSVD0_MASK (0x3 << 6)
+#define BCH_DEBUG0_RSVD0_OFFSET 6
+#define BCH_DEBUG0_DEBUG_REG_SELECT_MASK 0x3f
+#define BCH_DEBUG0_DEBUG_REG_SELECT_OFFSET 0
+
+#define BCH_DBGKESREAD_VALUES_MASK 0xffffffff
+#define BCH_DBGKESREAD_VALUES_OFFSET 0
+
+#define BCH_DBGCSFEREAD_VALUES_MASK 0xffffffff
+#define BCH_DBGCSFEREAD_VALUES_OFFSET 0
+
+#define BCH_DBGSYNDGENREAD_VALUES_MASK 0xffffffff
+#define BCH_DBGSYNDGENREAD_VALUES_OFFSET 0
+
+#define BCH_DBGAHBMREAD_VALUES_MASK 0xffffffff
+#define BCH_DBGAHBMREAD_VALUES_OFFSET 0
+
+#define BCH_BLOCKNAME_NAME_MASK 0xffffffff
+#define BCH_BLOCKNAME_NAME_OFFSET 0
+
+#define BCH_VERSION_MAJOR_MASK (0xff << 24)
+#define BCH_VERSION_MAJOR_OFFSET 24
+#define BCH_VERSION_MINOR_MASK (0xff << 16)
+#define BCH_VERSION_MINOR_OFFSET 16
+#define BCH_VERSION_STEP_MASK 0xffff
+#define BCH_VERSION_STEP_OFFSET 0
+
+#endif /* __MX28_REGS_BCH_H__ */
diff --git a/arch/arm/include/asm/arch-mx28/regs-clkctrl.h b/arch/arm/include/asm/arch-mx28/regs-clkctrl.h
new file mode 100644
index 0000000..93d0397
--- /dev/null
+++ b/arch/arm/include/asm/arch-mx28/regs-clkctrl.h
@@ -0,0 +1,312 @@
+/*
+ * Freescale i.MX28 CLKCTRL Register Definitions
+ *
+ * Copyright (C) 2011 Marek Vasut <marek.vasut at gmail.com>
+ * on behalf of DENX Software Engineering GmbH
+ *
+ * Based on code from LTIB:
+ * Copyright 2008-2010 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#ifndef __MX28_REGS_CLKCTRL_H__
+#define __MX28_REGS_CLKCTRL_H__
+
+#include <asm/arch/regs-common.h>
+
+#ifndef __ASSEMBLY__
+struct mx28_clkctrl_regs {
+ mx28_reg(hw_clkctrl_pll0ctrl0) /* 0x00 */
+ mx28_reg(hw_clkctrl_pll0ctrl1) /* 0x10 */
+ mx28_reg(hw_clkctrl_pll1ctrl0) /* 0x20 */
+ mx28_reg(hw_clkctrl_pll1ctrl1) /* 0x30 */
+ mx28_reg(hw_clkctrl_pll2ctrl0) /* 0x40 */
+ mx28_reg(hw_clkctrl_cpu) /* 0x50 */
+ mx28_reg(hw_clkctrl_hbus) /* 0x60 */
+ mx28_reg(hw_clkctrl_xbus) /* 0x70 */
+ mx28_reg(hw_clkctrl_xtal) /* 0x80 */
+ mx28_reg(hw_clkctrl_ssp0) /* 0x90 */
+ mx28_reg(hw_clkctrl_ssp1) /* 0xa0 */
+ mx28_reg(hw_clkctrl_ssp2) /* 0xb0 */
+ mx28_reg(hw_clkctrl_ssp3) /* 0xc0 */
+ mx28_reg(hw_clkctrl_gpmi) /* 0xd0 */
+ mx28_reg(hw_clkctrl_spdif) /* 0xe0 */
+ mx28_reg(hw_clkctrl_emi) /* 0xf0 */
+ mx28_reg(hw_clkctrl_saif0) /* 0x100 */
+ mx28_reg(hw_clkctrl_saif1) /* 0x110 */
+ mx28_reg(hw_clkctrl_lcdif) /* 0x120 */
+ mx28_reg(hw_clkctrl_etm) /* 0x130 */
+ mx28_reg(hw_clkctrl_enet) /* 0x140 */
+ mx28_reg(hw_clkctrl_hsadc) /* 0x150 */
+ mx28_reg(hw_clkctrl_flexcan) /* 0x160 */
+
+ uint32_t reserved[16];
+
+ mx28_reg(hw_clkctrl_frac0) /* 0x1b0 */
+ mx28_reg(hw_clkctrl_frac1) /* 0x1c0 */
+ mx28_reg(hw_clkctrl_clkseq) /* 0x1d0 */
+ mx28_reg(hw_clkctrl_reset) /* 0x1e0 */
+ mx28_reg(hw_clkctrl_status) /* 0x1f0 */
+ mx28_reg(hw_clkctrl_version) /* 0x200 */
+};
+#endif
+
+#define CLKCTRL_PLL0CTRL0_LFR_SEL_MASK (0x3 << 28)
+#define CLKCTRL_PLL0CTRL0_LFR_SEL_OFFSET 28
+#define CLKCTRL_PLL0CTRL0_LFR_SEL_DEFAULT (0x0 << 28)
+#define CLKCTRL_PLL0CTRL0_LFR_SEL_TIMES_2 (0x1 << 28)
+#define CLKCTRL_PLL0CTRL0_LFR_SEL_TIMES_05 (0x2 << 28)
+#define CLKCTRL_PLL0CTRL0_LFR_SEL_UNDEFINED (0x3 << 28)
+#define CLKCTRL_PLL0CTRL0_CP_SEL_MASK (0x3 << 24)
+#define CLKCTRL_PLL0CTRL0_CP_SEL_OFFSET 24
+#define CLKCTRL_PLL0CTRL0_CP_SEL_DEFAULT (0x0 << 24)
+#define CLKCTRL_PLL0CTRL0_CP_SEL_TIMES_2 (0x1 << 24)
+#define CLKCTRL_PLL0CTRL0_CP_SEL_TIMES_05 (0x2 << 24)
+#define CLKCTRL_PLL0CTRL0_CP_SEL_UNDEFINED (0x3 << 24)
+#define CLKCTRL_PLL0CTRL0_DIV_SEL_MASK (0x3 << 20)
+#define CLKCTRL_PLL0CTRL0_DIV_SEL_OFFSET 20
+#define CLKCTRL_PLL0CTRL0_DIV_SEL_DEFAULT (0x0 << 20)
+#define CLKCTRL_PLL0CTRL0_DIV_SEL_LOWER (0x1 << 20)
+#define CLKCTRL_PLL0CTRL0_DIV_SEL_LOWEST (0x2 << 20)
+#define CLKCTRL_PLL0CTRL0_DIV_SEL_UNDEFINED (0x3 << 20)
+#define CLKCTRL_PLL0CTRL0_EN_USB_CLKS (1 << 18)
+#define CLKCTRL_PLL0CTRL0_POWER (1 << 17)
+
+#define CLKCTRL_PLL0CTRL1_LOCK (1 << 31)
+#define CLKCTRL_PLL0CTRL1_FORCE_LOCK (1 << 30)
+#define CLKCTRL_PLL0CTRL1_LOCK_COUNT_MASK 0xffff
+#define CLKCTRL_PLL0CTRL1_LOCK_COUNT_OFFSET 0
+
+#define CLKCTRL_PLL1CTRL0_CLKGATEEMI (1 << 31)
+#define CLKCTRL_PLL1CTRL0_LFR_SEL_MASK (0x3 << 28)
+#define CLKCTRL_PLL1CTRL0_LFR_SEL_OFFSET 28
+#define CLKCTRL_PLL1CTRL0_LFR_SEL_DEFAULT (0x0 << 28)
+#define CLKCTRL_PLL1CTRL0_LFR_SEL_TIMES_2 (0x1 << 28)
+#define CLKCTRL_PLL1CTRL0_LFR_SEL_TIMES_05 (0x2 << 28)
+#define CLKCTRL_PLL1CTRL0_LFR_SEL_UNDEFINED (0x3 << 28)
+#define CLKCTRL_PLL1CTRL0_CP_SEL_MASK (0x3 << 24)
+#define CLKCTRL_PLL1CTRL0_CP_SEL_OFFSET 24
+#define CLKCTRL_PLL1CTRL0_CP_SEL_DEFAULT (0x0 << 24)
+#define CLKCTRL_PLL1CTRL0_CP_SEL_TIMES_2 (0x1 << 24)
+#define CLKCTRL_PLL1CTRL0_CP_SEL_TIMES_05 (0x2 << 24)
+#define CLKCTRL_PLL1CTRL0_CP_SEL_UNDEFINED (0x3 << 24)
+#define CLKCTRL_PLL1CTRL0_DIV_SEL_MASK (0x3 << 20)
+#define CLKCTRL_PLL1CTRL0_DIV_SEL_OFFSET 20
+#define CLKCTRL_PLL1CTRL0_DIV_SEL_DEFAULT (0x0 << 20)
+#define CLKCTRL_PLL1CTRL0_DIV_SEL_LOWER (0x1 << 20)
+#define CLKCTRL_PLL1CTRL0_DIV_SEL_LOWEST (0x2 << 20)
+#define CLKCTRL_PLL1CTRL0_DIV_SEL_UNDEFINED (0x3 << 20)
+#define CLKCTRL_PLL1CTRL0_EN_USB_CLKS (1 << 18)
+#define CLKCTRL_PLL1CTRL0_POWER (1 << 17)
+
+#define CLKCTRL_PLL1CTRL1_LOCK (1 << 31)
+#define CLKCTRL_PLL1CTRL1_FORCE_LOCK (1 << 30)
+#define CLKCTRL_PLL1CTRL1_LOCK_COUNT_MASK 0xffff
+#define CLKCTRL_PLL1CTRL1_LOCK_COUNT_OFFSET 0
+
+#define CLKCTRL_PLL2CTRL0_CLKGATE (1 << 31)
+#define CLKCTRL_PLL2CTRL0_LFR_SEL_MASK (0x3 << 28)
+#define CLKCTRL_PLL2CTRL0_LFR_SEL_OFFSET 28
+#define CLKCTRL_PLL2CTRL0_HOLD_RING_OFF_B (1 << 26)
+#define CLKCTRL_PLL2CTRL0_CP_SEL_MASK (0x3 << 24)
+#define CLKCTRL_PLL2CTRL0_CP_SEL_OFFSET 24
+#define CLKCTRL_PLL2CTRL0_POWER (1 << 23)
+
+#define CLKCTRL_CPU_BUSY_REF_XTAL (1 << 29)
+#define CLKCTRL_CPU_BUSY_REF_CPU (1 << 28)
+#define CLKCTRL_CPU_DIV_XTAL_FRAC_EN (1 << 26)
+#define CLKCTRL_CPU_DIV_XTAL_MASK (0x3ff << 16)
+#define CLKCTRL_CPU_DIV_XTAL_OFFSET 16
+#define CLKCTRL_CPU_INTERRUPT_WAIT (1 << 12)
+#define CLKCTRL_CPU_DIV_CPU_FRAC_EN (1 << 10)
+#define CLKCTRL_CPU_DIV_CPU_MASK 0x3f
+#define CLKCTRL_CPU_DIV_CPU_OFFSET 0
+
+#define CLKCTRL_HBUS_ASM_BUSY (1 << 31)
+#define CLKCTRL_HBUS_DCP_AS_ENABLE (1 << 30)
+#define CLKCTRL_HBUS_PXP_AS_ENABLE (1 << 29)
+#define CLKCTRL_HBUS_ASM_EMIPORT_AS_ENABLE (1 << 27)
+#define CLKCTRL_HBUS_APBHDMA_AS_ENABLE (1 << 26)
+#define CLKCTRL_HBUS_APBXDMA_AS_ENABLE (1 << 25)
+#define CLKCTRL_HBUS_TRAFFIC_JAM_AS_ENABLE (1 << 24)
+#define CLKCTRL_HBUS_TRAFFIC_AS_ENABLE (1 << 23)
+#define CLKCTRL_HBUS_CPU_DATA_AS_ENABLE (1 << 22)
+#define CLKCTRL_HBUS_CPU_INSTR_AS_ENABLE (1 << 21)
+#define CLKCTRL_HBUS_ASM_ENABLE (1 << 20)
+#define CLKCTRL_HBUS_AUTO_CLEAR_DIV_ENABLE (1 << 19)
+#define CLKCTRL_HBUS_SLOW_DIV_MASK (0x7 << 16)
+#define CLKCTRL_HBUS_SLOW_DIV_OFFSET 16
+#define CLKCTRL_HBUS_SLOW_DIV_BY1 (0x0 << 16)
+#define CLKCTRL_HBUS_SLOW_DIV_BY2 (0x1 << 16)
+#define CLKCTRL_HBUS_SLOW_DIV_BY4 (0x2 << 16)
+#define CLKCTRL_HBUS_SLOW_DIV_BY8 (0x3 << 16)
+#define CLKCTRL_HBUS_SLOW_DIV_BY16 (0x4 << 16)
+#define CLKCTRL_HBUS_SLOW_DIV_BY32 (0x5 << 16)
+#define CLKCTRL_HBUS_DIV_FRAC_EN (1 << 5)
+#define CLKCTRL_HBUS_DIV_MASK 0x1f
+#define CLKCTRL_HBUS_DIV_OFFSET 0
+
+#define CLKCTRL_XBUS_BUSY (1 << 31)
+#define CLKCTRL_XBUS_AUTO_CLEAR_DIV_ENABLE (1 << 11)
+#define CLKCTRL_XBUS_DIV_FRAC_EN (1 << 10)
+#define CLKCTRL_XBUS_DIV_MASK 0x3ff
+#define CLKCTRL_XBUS_DIV_OFFSET 0
+
+#define CLKCTRL_XTAL_UART_CLK_GATE (1 << 31)
+#define CLKCTRL_XTAL_PWM_CLK24M_GATE (1 << 29)
+#define CLKCTRL_XTAL_TIMROT_CLK32K_GATE (1 << 26)
+#define CLKCTRL_XTAL_DIV_UART_MASK 0x3
+#define CLKCTRL_XTAL_DIV_UART_OFFSET 0
+
+#define CLKCTRL_SSP_CLKGATE (1 << 31)
+#define CLKCTRL_SSP_BUSY (1 << 29)
+#define CLKCTRL_SSP_DIV_FRAC_EN (1 << 9)
+#define CLKCTRL_SSP_DIV_MASK 0x1ff
+#define CLKCTRL_SSP_DIV_OFFSET 0
+
+#define CLKCTRL_GPMI_CLKGATE (1 << 31)
+#define CLKCTRL_GPMI_BUSY (1 << 29)
+#define CLKCTRL_GPMI_DIV_FRAC_EN (1 << 10)
+#define CLKCTRL_GPMI_DIV_MASK 0x3ff
+#define CLKCTRL_GPMI_DIV_OFFSET 0
+
+#define CLKCTRL_SPDIF_CLKGATE (1 << 31)
+
+#define CLKCTRL_EMI_CLKGATE (1 << 31)
+#define CLKCTRL_EMI_SYNC_MODE_EN (1 << 30)
+#define CLKCTRL_EMI_BUSY_REF_XTAL (1 << 29)
+#define CLKCTRL_EMI_BUSY_REF_EMI (1 << 28)
+#define CLKCTRL_EMI_BUSY_REF_CPU (1 << 27)
+#define CLKCTRL_EMI_BUSY_SYNC_MODE (1 << 26)
+#define CLKCTRL_EMI_BUSY_DCC_RESYNC (1 << 17)
+#define CLKCTRL_EMI_DCC_RESYNC_ENABLE (1 << 16)
+#define CLKCTRL_EMI_DIV_XTAL_MASK (0xf << 8)
+#define CLKCTRL_EMI_DIV_XTAL_OFFSET 8
+#define CLKCTRL_EMI_DIV_EMI_MASK 0x3f
+#define CLKCTRL_EMI_DIV_EMI_OFFSET 0
+
+#define CLKCTRL_SAIF0_CLKGATE (1 << 31)
+#define CLKCTRL_SAIF0_BUSY (1 << 29)
+#define CLKCTRL_SAIF0_DIV_FRAC_EN (1 << 16)
+#define CLKCTRL_SAIF0_DIV_MASK 0xffff
+#define CLKCTRL_SAIF0_DIV_OFFSET 0
+
+#define CLKCTRL_SAIF1_CLKGATE (1 << 31)
+#define CLKCTRL_SAIF1_BUSY (1 << 29)
+#define CLKCTRL_SAIF1_DIV_FRAC_EN (1 << 16)
+#define CLKCTRL_SAIF1_DIV_MASK 0xffff
+#define CLKCTRL_SAIF1_DIV_OFFSET 0
+
+#define CLKCTRL_DIS_LCDIF_CLKGATE (1 << 31)
+#define CLKCTRL_DIS_LCDIF_BUSY (1 << 29)
+#define CLKCTRL_DIS_LCDIF_DIV_FRAC_EN (1 << 13)
+#define CLKCTRL_DIS_LCDIF_DIV_MASK 0x1fff
+#define CLKCTRL_DIS_LCDIF_DIV_OFFSET 0
+
+#define CLKCTRL_ETM_CLKGATE (1 << 31)
+#define CLKCTRL_ETM_BUSY (1 << 29)
+#define CLKCTRL_ETM_DIV_FRAC_EN (1 << 7)
+#define CLKCTRL_ETM_DIV_MASK 0x7f
+#define CLKCTRL_ETM_DIV_OFFSET 0
+
+#define CLKCTRL_ENET_SLEEP (1 << 31)
+#define CLKCTRL_ENET_DISABLE (1 << 30)
+#define CLKCTRL_ENET_STATUS (1 << 29)
+#define CLKCTRL_ENET_BUSY_TIME (1 << 27)
+#define CLKCTRL_ENET_DIV_TIME_MASK (0x3f << 21)
+#define CLKCTRL_ENET_DIV_TIME_OFFSET 21
+#define CLKCTRL_ENET_TIME_SEL_MASK (0x3 << 19)
+#define CLKCTRL_ENET_TIME_SEL_OFFSET 19
+#define CLKCTRL_ENET_TIME_SEL_XTAL (0x0 << 19)
+#define CLKCTRL_ENET_TIME_SEL_PLL (0x1 << 19)
+#define CLKCTRL_ENET_TIME_SEL_RMII_CLK (0x2 << 19)
+#define CLKCTRL_ENET_TIME_SEL_UNDEFINED (0x3 << 19)
+#define CLKCTRL_ENET_CLK_OUT_EN (1 << 18)
+#define CLKCTRL_ENET_RESET_BY_SW_CHIP (1 << 17)
+#define CLKCTRL_ENET_RESET_BY_SW (1 << 16)
+
+#define CLKCTRL_HSADC_RESETB (1 << 30)
+#define CLKCTRL_HSADC_FREQDIV_MASK (0x3 << 28)
+#define CLKCTRL_HSADC_FREQDIV_OFFSET 28
+
+#define CLKCTRL_FLEXCAN_STOP_CAN0 (1 << 30)
+#define CLKCTRL_FLEXCAN_CAN0_STATUS (1 << 29)
+#define CLKCTRL_FLEXCAN_STOP_CAN1 (1 << 28)
+#define CLKCTRL_FLEXCAN_CAN1_STATUS (1 << 27)
+
+#define CLKCTRL_FRAC0_CLKGATEIO0 (1 << 31)
+#define CLKCTRL_FRAC0_IO0_STABLE (1 << 30)
+#define CLKCTRL_FRAC0_IO0FRAC_MASK (0x3f << 24)
+#define CLKCTRL_FRAC0_IO0FRAC_OFFSET 24
+#define CLKCTRL_FRAC0_CLKGATEIO1 (1 << 23)
+#define CLKCTRL_FRAC0_IO1_STABLE (1 << 22)
+#define CLKCTRL_FRAC0_IO1FRAC_MASK (0x3f << 16)
+#define CLKCTRL_FRAC0_IO1FRAC_OFFSET 16
+#define CLKCTRL_FRAC0_CLKGATEEMI (1 << 15)
+#define CLKCTRL_FRAC0_EMI_STABLE (1 << 14)
+#define CLKCTRL_FRAC0_EMIFRAC_MASK (0x3f << 8)
+#define CLKCTRL_FRAC0_EMIFRAC_OFFSET 8
+#define CLKCTRL_FRAC0_CLKGATECPU (1 << 7)
+#define CLKCTRL_FRAC0_CPU_STABLE (1 << 6)
+#define CLKCTRL_FRAC0_CPUFRAC_MASK 0x3f
+#define CLKCTRL_FRAC0_CPUFRAC_OFFSET 0
+
+#define CLKCTRL_FRAC1_CLKGATEGPMI (1 << 23)
+#define CLKCTRL_FRAC1_GPMI_STABLE (1 << 22)
+#define CLKCTRL_FRAC1_GPMIFRAC_MASK (0x3f << 16)
+#define CLKCTRL_FRAC1_GPMIFRAC_OFFSET 16
+#define CLKCTRL_FRAC1_CLKGATEHSADC (1 << 15)
+#define CLKCTRL_FRAC1_HSADC_STABLE (1 << 14)
+#define CLKCTRL_FRAC1_HSADCFRAC_MASK (0x3f << 8)
+#define CLKCTRL_FRAC1_HSADCFRAC_OFFSET 8
+#define CLKCTRL_FRAC1_CLKGATEPIX (1 << 7)
+#define CLKCTRL_FRAC1_PIX_STABLE (1 << 6)
+#define CLKCTRL_FRAC1_PIXFRAC_MASK 0x3f
+#define CLKCTRL_FRAC1_PIXFRAC_OFFSET 0
+
+#define CLKCTRL_CLKSEQ_BYPASS_CPU (1 << 18)
+#define CLKCTRL_CLKSEQ_BYPASS_DIS_LCDIF (1 << 14)
+#define CLKCTRL_CLKSEQ_BYPASS_DIS_LCDIF_BYPASS (0x1 << 14)
+#define CLKCTRL_CLKSEQ_BYPASS_DIS_LCDIF_PFD (0x0 << 14)
+#define CLKCTRL_CLKSEQ_BYPASS_ETM (1 << 8)
+#define CLKCTRL_CLKSEQ_BYPASS_EMI (1 << 7)
+#define CLKCTRL_CLKSEQ_BYPASS_SSP3 (1 << 6)
+#define CLKCTRL_CLKSEQ_BYPASS_SSP2 (1 << 5)
+#define CLKCTRL_CLKSEQ_BYPASS_SSP1 (1 << 4)
+#define CLKCTRL_CLKSEQ_BYPASS_SSP0 (1 << 3)
+#define CLKCTRL_CLKSEQ_BYPASS_GPMI (1 << 2)
+#define CLKCTRL_CLKSEQ_BYPASS_SAIF1 (1 << 1)
+#define CLKCTRL_CLKSEQ_BYPASS_SAIF0 (1 << 0)
+
+#define CLKCTRL_RESET_WDOG_POR_DISABLE (1 << 5)
+#define CLKCTRL_RESET_EXTERNAL_RESET_ENABLE (1 << 4)
+#define CLKCTRL_RESET_THERMAL_RESET_ENABLE (1 << 3)
+#define CLKCTRL_RESET_THERMAL_RESET_DEFAULT (1 << 2)
+#define CLKCTRL_RESET_CHIP (1 << 1)
+#define CLKCTRL_RESET_DIG (1 << 0)
+
+#define CLKCTRL_STATUS_CPU_LIMIT_MASK (0x3 << 30)
+#define CLKCTRL_STATUS_CPU_LIMIT_OFFSET 30
+
+#define CLKCTRL_VERSION_MAJOR_MASK (0xff << 24)
+#define CLKCTRL_VERSION_MAJOR_OFFSET 24
+#define CLKCTRL_VERSION_MINOR_MASK (0xff << 16)
+#define CLKCTRL_VERSION_MINOR_OFFSET 16
+#define CLKCTRL_VERSION_STEP_MASK 0xffff
+#define CLKCTRL_VERSION_STEP_OFFSET 0
+
+#endif /* __MX28_REGS_CLKCTRL_H__ */
diff --git a/arch/arm/include/asm/arch-mx28/regs-common.h b/arch/arm/include/asm/arch-mx28/regs-common.h
new file mode 100644
index 0000000..efe975b
--- /dev/null
+++ b/arch/arm/include/asm/arch-mx28/regs-common.h
@@ -0,0 +1,66 @@
+/*
+ * Freescale i.MX28 Register Accessors
+ *
+ * Copyright (C) 2011 Marek Vasut <marek.vasut at gmail.com>
+ * on behalf of DENX Software Engineering GmbH
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#ifndef __MX28_REGS_COMMON_H__
+#define __MX28_REGS_COMMON_H__
+
+/*
+ * The i.MX28 has interesting feature when it comes to register access. There
+ * are four kinds of access to one particular register. Those are:
+ *
+ * 1) Common read/write access. To use this mode, just write to the address of
+ * the register.
+ * 2) Set bits only access. To set bits, write which bits you want to set to the
+ * address of the register + 0x4.
+ * 3) Clear bits only access. To clear bits, write which bits you want to clear
+ * to the address of the register + 0x8.
+ * 4) Toggle bits only access. To toggle bits, write which bits you want to
+ * toggle to the address of the register + 0xc.
+ *
+ * IMPORTANT NOTE: Not all registers support accesses 2-4! Also, not all bits
+ * can be set/cleared by pure write as in access type 1, some need to be
+ * explicitly set/cleared by using access type 2-3.
+ *
+ * The following macros and structures allow the user to either access the
+ * register in all aforementioned modes (by accessing reg_name, reg_name_set,
+ * reg_name_clr, reg_name_tog) or pass the register structure further into
+ * various functions with correct type information (by accessing reg_name_reg).
+ *
+ */
+
+#define __mx28_reg(name) \
+ uint32_t name; \
+ uint32_t name##_set; \
+ uint32_t name##_clr; \
+ uint32_t name##_tog;
+
+struct mx28_register {
+ __mx28_reg(reg)
+};
+
+#define mx28_reg(name) \
+ union { \
+ struct { __mx28_reg(name) }; \
+ struct mx28_register name##_reg; \
+ };
+
+#endif /* __MX28_REGS_COMMON_H__ */
diff --git a/arch/arm/include/asm/arch-mx28/regs-gpmi.h b/arch/arm/include/asm/arch-mx28/regs-gpmi.h
new file mode 100644
index 0000000..0096793
--- /dev/null
+++ b/arch/arm/include/asm/arch-mx28/regs-gpmi.h
@@ -0,0 +1,222 @@
+/*
+ * Freescale i.MX28 GPMI Register Definitions
+ *
+ * Copyright (C) 2011 Marek Vasut <marek.vasut at gmail.com>
+ * on behalf of DENX Software Engineering GmbH
+ *
+ * Based on code from LTIB:
+ * Copyright 2008-2010 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#ifndef __MX28_REGS_GPMI_H__
+#define __MX28_REGS_GPMI_H__
+
+#include <asm/arch/regs-common.h>
+
+#ifndef __ASSEMBLY__
+struct mx28_gpmi_regs {
+ mx28_reg(hw_gpmi_ctrl0)
+ mx28_reg(hw_gpmi_compare)
+ mx28_reg(hw_gpmi_eccctrl)
+ mx28_reg(hw_gpmi_ecccount)
+ mx28_reg(hw_gpmi_payload)
+ mx28_reg(hw_gpmi_auxiliary)
+ mx28_reg(hw_gpmi_ctrl1)
+ mx28_reg(hw_gpmi_timing0)
+ mx28_reg(hw_gpmi_timing1)
+
+ uint32_t reserved[4];
+
+ mx28_reg(hw_gpmi_data)
+ mx28_reg(hw_gpmi_stat)
+ mx28_reg(hw_gpmi_debug)
+ mx28_reg(hw_gpmi_version)
+};
+#endif
+
+#define GPMI_CTRL0_SFTRST (1 << 31)
+#define GPMI_CTRL0_CLKGATE (1 << 30)
+#define GPMI_CTRL0_RUN (1 << 29)
+#define GPMI_CTRL0_DEV_IRQ_EN (1 << 28)
+#define GPMI_CTRL0_LOCK_CS (1 << 27)
+#define GPMI_CTRL0_UDMA (1 << 26)
+#define GPMI_CTRL0_COMMAND_MODE_MASK (0x3 << 24)
+#define GPMI_CTRL0_COMMAND_MODE_OFFSET 24
+#define GPMI_CTRL0_COMMAND_MODE_WRITE (0x0 << 24)
+#define GPMI_CTRL0_COMMAND_MODE_READ (0x1 << 24)
+#define GPMI_CTRL0_COMMAND_MODE_READ_AND_COMPARE (0x2 << 24)
+#define GPMI_CTRL0_COMMAND_MODE_WAIT_FOR_READY (0x3 << 24)
+#define GPMI_CTRL0_WORD_LENGTH (1 << 23)
+#define GPMI_CTRL0_CS_MASK (0x7 << 20)
+#define GPMI_CTRL0_CS_OFFSET 20
+#define GPMI_CTRL0_ADDRESS_MASK (0x7 << 17)
+#define GPMI_CTRL0_ADDRESS_OFFSET 17
+#define GPMI_CTRL0_ADDRESS_NAND_DATA (0x0 << 17)
+#define GPMI_CTRL0_ADDRESS_NAND_CLE (0x1 << 17)
+#define GPMI_CTRL0_ADDRESS_NAND_ALE (0x2 << 17)
+#define GPMI_CTRL0_ADDRESS_INCREMENT (1 << 16)
+#define GPMI_CTRL0_XFER_COUNT_MASK 0xffff
+#define GPMI_CTRL0_XFER_COUNT_OFFSET 0
+
+#define GPMI_COMPARE_MASK_MASK (0xffff << 16)
+#define GPMI_COMPARE_MASK_OFFSET 16
+#define GPMI_COMPARE_REFERENCE_MASK 0xffff
+#define GPMI_COMPARE_REFERENCE_OFFSET 0
+
+#define GPMI_ECCCTRL_HANDLE_MASK (0xffff << 16)
+#define GPMI_ECCCTRL_HANDLE_OFFSET 16
+#define GPMI_ECCCTRL_ECC_CMD_MASK (0x3 << 13)
+#define GPMI_ECCCTRL_ECC_CMD_OFFSET 13
+#define GPMI_ECCCTRL_ECC_CMD_DECODE (0x0 << 13)
+#define GPMI_ECCCTRL_ECC_CMD_ENCODE (0x1 << 13)
+#define GPMI_ECCCTRL_ENABLE_ECC (1 << 12)
+#define GPMI_ECCCTRL_BUFFER_MASK_MASK 0x1ff
+#define GPMI_ECCCTRL_BUFFER_MASK_OFFSET 0
+#define GPMI_ECCCTRL_BUFFER_MASK_BCH_AUXONLY 0x100
+#define GPMI_ECCCTRL_BUFFER_MASK_BCH_PAGE 0x1ff
+
+#define GPMI_ECCCOUNT_COUNT_MASK 0xffff
+#define GPMI_ECCCOUNT_COUNT_OFFSET 0
+
+#define GPMI_PAYLOAD_ADDRESS_MASK (0x3fffffff << 2)
+#define GPMI_PAYLOAD_ADDRESS_OFFSET 2
+
+#define GPMI_AUXILIARY_ADDRESS_MASK (0x3fffffff << 2)
+#define GPMI_AUXILIARY_ADDRESS_OFFSET 2
+
+#define GPMI_CTRL1_DECOUPLE_CS (1 << 24)
+#define GPMI_CTRL1_WRN_DLY_SEL_MASK (0x3 << 22)
+#define GPMI_CTRL1_WRN_DLY_SEL_OFFSET 22
+#define GPMI_CTRL1_TIMEOUT_IRQ_EN (1 << 20)
+#define GPMI_CTRL1_GANGED_RDYBUSY (1 << 19)
+#define GPMI_CTRL1_BCH_MODE (1 << 18)
+#define GPMI_CTRL1_DLL_ENABLE (1 << 17)
+#define GPMI_CTRL1_HALF_PERIOD (1 << 16)
+#define GPMI_CTRL1_RDN_DELAY_MASK (0xf << 12)
+#define GPMI_CTRL1_RDN_DELAY_OFFSET 12
+#define GPMI_CTRL1_DMA2ECC_MODE (1 << 11)
+#define GPMI_CTRL1_DEV_IRQ (1 << 10)
+#define GPMI_CTRL1_TIMEOUT_IRQ (1 << 9)
+#define GPMI_CTRL1_BURST_EN (1 << 8)
+#define GPMI_CTRL1_ABORT_WAIT_REQUEST (1 << 7)
+#define GPMI_CTRL1_ABORT_WAIT_FOR_READY_CHANNEL_MASK (0x7 << 4)
+#define GPMI_CTRL1_ABORT_WAIT_FOR_READY_CHANNEL_OFFSET 4
+#define GPMI_CTRL1_DEV_RESET (1 << 3)
+#define GPMI_CTRL1_ATA_IRQRDY_POLARITY (1 << 2)
+#define GPMI_CTRL1_CAMERA_MODE (1 << 1)
+#define GPMI_CTRL1_GPMI_MODE (1 << 0)
+
+#define GPMI_TIMING0_ADDRESS_SETUP_MASK (0xff << 16)
+#define GPMI_TIMING0_ADDRESS_SETUP_OFFSET 16
+#define GPMI_TIMING0_DATA_HOLD_MASK (0xff << 8)
+#define GPMI_TIMING0_DATA_HOLD_OFFSET 8
+#define GPMI_TIMING0_DATA_SETUP_MASK 0xff
+#define GPMI_TIMING0_DATA_SETUP_OFFSET 0
+
+#define GPMI_TIMING1_DEVICE_BUSY_TIMEOUT_MASK (0xffff << 16)
+#define GPMI_TIMING1_DEVICE_BUSY_TIMEOUT_OFFSET 16
+
+#define GPMI_TIMING2_UDMA_TRP_MASK (0xff << 24)
+#define GPMI_TIMING2_UDMA_TRP_OFFSET 24
+#define GPMI_TIMING2_UDMA_ENV_MASK (0xff << 16)
+#define GPMI_TIMING2_UDMA_ENV_OFFSET 16
+#define GPMI_TIMING2_UDMA_HOLD_MASK (0xff << 8)
+#define GPMI_TIMING2_UDMA_HOLD_OFFSET 8
+#define GPMI_TIMING2_UDMA_SETUP_MASK 0xff
+#define GPMI_TIMING2_UDMA_SETUP_OFFSET 0
+
+#define GPMI_DATA_DATA_MASK 0xffffffff
+#define GPMI_DATA_DATA_OFFSET 0
+
+#define GPMI_STAT_READY_BUSY_MASK (0xff << 24)
+#define GPMI_STAT_READY_BUSY_OFFSET 24
+#define GPMI_STAT_RDY_TIMEOUT_MASK (0xff << 16)
+#define GPMI_STAT_RDY_TIMEOUT_OFFSET 16
+#define GPMI_STAT_DEV7_ERROR (1 << 15)
+#define GPMI_STAT_DEV6_ERROR (1 << 14)
+#define GPMI_STAT_DEV5_ERROR (1 << 13)
+#define GPMI_STAT_DEV4_ERROR (1 << 12)
+#define GPMI_STAT_DEV3_ERROR (1 << 11)
+#define GPMI_STAT_DEV2_ERROR (1 << 10)
+#define GPMI_STAT_DEV1_ERROR (1 << 9)
+#define GPMI_STAT_DEV0_ERROR (1 << 8)
+#define GPMI_STAT_ATA_IRQ (1 << 4)
+#define GPMI_STAT_INVALID_BUFFER_MASK (1 << 3)
+#define GPMI_STAT_FIFO_EMPTY (1 << 2)
+#define GPMI_STAT_FIFO_FULL (1 << 1)
+#define GPMI_STAT_PRESENT (1 << 0)
+
+#define GPMI_DEBUG_WAIT_FOR_READY_END_MASK (0xff << 24)
+#define GPMI_DEBUG_WAIT_FOR_READY_END_OFFSET 24
+#define GPMI_DEBUG_DMA_SENSE_MASK (0xff << 16)
+#define GPMI_DEBUG_DMA_SENSE_OFFSET 16
+#define GPMI_DEBUG_DMAREQ_MASK (0xff << 8)
+#define GPMI_DEBUG_DMAREQ_OFFSET 8
+#define GPMI_DEBUG_CMD_END_MASK 0xff
+#define GPMI_DEBUG_CMD_END_OFFSET 0
+
+#define GPMI_VERSION_MAJOR_MASK (0xff << 24)
+#define GPMI_VERSION_MAJOR_OFFSET 24
+#define GPMI_VERSION_MINOR_MASK (0xff << 16)
+#define GPMI_VERSION_MINOR_OFFSET 16
+#define GPMI_VERSION_STEP_MASK 0xffff
+#define GPMI_VERSION_STEP_OFFSET 0
+
+#define GPMI_DEBUG2_UDMA_STATE_MASK (0xf << 24)
+#define GPMI_DEBUG2_UDMA_STATE_OFFSET 24
+#define GPMI_DEBUG2_BUSY (1 << 23)
+#define GPMI_DEBUG2_PIN_STATE_MASK (0x7 << 20)
+#define GPMI_DEBUG2_PIN_STATE_OFFSET 20
+#define GPMI_DEBUG2_PIN_STATE_PSM_IDLE (0x0 << 20)
+#define GPMI_DEBUG2_PIN_STATE_PSM_BYTCNT (0x1 << 20)
+#define GPMI_DEBUG2_PIN_STATE_PSM_ADDR (0x2 << 20)
+#define GPMI_DEBUG2_PIN_STATE_PSM_STALL (0x3 << 20)
+#define GPMI_DEBUG2_PIN_STATE_PSM_STROBE (0x4 << 20)
+#define GPMI_DEBUG2_PIN_STATE_PSM_ATARDY (0x5 << 20)
+#define GPMI_DEBUG2_PIN_STATE_PSM_DHOLD (0x6 << 20)
+#define GPMI_DEBUG2_PIN_STATE_PSM_DONE (0x7 << 20)
+#define GPMI_DEBUG2_MAIN_STATE_MASK (0xf << 16)
+#define GPMI_DEBUG2_MAIN_STATE_OFFSET 16
+#define GPMI_DEBUG2_MAIN_STATE_MSM_IDLE (0x0 << 16)
+#define GPMI_DEBUG2_MAIN_STATE_MSM_BYTCNT (0x1 << 16)
+#define GPMI_DEBUG2_MAIN_STATE_MSM_WAITFE (0x2 << 16)
+#define GPMI_DEBUG2_MAIN_STATE_MSM_WAITFR (0x3 << 16)
+#define GPMI_DEBUG2_MAIN_STATE_MSM_DMAREQ (0x4 << 16)
+#define GPMI_DEBUG2_MAIN_STATE_MSM_DMAACK (0x5 << 16)
+#define GPMI_DEBUG2_MAIN_STATE_MSM_WAITFF (0x6 << 16)
+#define GPMI_DEBUG2_MAIN_STATE_MSM_LDFIFO (0x7 << 16)
+#define GPMI_DEBUG2_MAIN_STATE_MSM_LDDMAR (0x8 << 16)
+#define GPMI_DEBUG2_MAIN_STATE_MSM_RDCMP (0x9 << 16)
+#define GPMI_DEBUG2_MAIN_STATE_MSM_DONE (0xa << 16)
+#define GPMI_DEBUG2_SYND2GPMI_BE_MASK (0xf << 12)
+#define GPMI_DEBUG2_SYND2GPMI_BE_OFFSET 12
+#define GPMI_DEBUG2_GPMI2SYND_VALID (1 << 11)
+#define GPMI_DEBUG2_GPMI2SYND_READY (1 << 10)
+#define GPMI_DEBUG2_SYND2GPMI_VALID (1 << 9)
+#define GPMI_DEBUG2_SYND2GPMI_READY (1 << 8)
+#define GPMI_DEBUG2_VIEW_DELAYED_RDN (1 << 7)
+#define GPMI_DEBUG2_UPDATE_WINDOW (1 << 6)
+#define GPMI_DEBUG2_RDN_TAP_MASK 0x3f
+#define GPMI_DEBUG2_RDN_TAP_OFFSET 0
+
+#define GPMI_DEBUG3_APB_WORD_CNTR_MASK (0xffff << 16)
+#define GPMI_DEBUG3_APB_WORD_CNTR_OFFSET 16
+#define GPMI_DEBUG3_DEV_WORD_CNTR_MASK 0xffff
+#define GPMI_DEBUG3_DEV_WORD_CNTR_OFFSET 0
+
+#endif /* __MX28_REGS_GPMI_H__ */
diff --git a/arch/arm/include/asm/arch-mx28/regs-i2c.h b/arch/arm/include/asm/arch-mx28/regs-i2c.h
new file mode 100644
index 0000000..30e0ed7
--- /dev/null
+++ b/arch/arm/include/asm/arch-mx28/regs-i2c.h
@@ -0,0 +1,207 @@
+/*
+ * Freescale i.MX28 I2C Register Definitions
+ *
+ * Copyright (C) 2011 Marek Vasut <marek.vasut at gmail.com>
+ * on behalf of DENX Software Engineering GmbH
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#ifndef __MX28_REGS_I2C_H__
+#define __MX28_REGS_I2C_H__
+
+#include <asm/arch/regs-common.h>
+
+#ifndef __ASSEMBLY__
+struct mx28_i2c_regs {
+ mx28_reg(hw_i2c_ctrl0)
+ mx28_reg(hw_i2c_timing0)
+ mx28_reg(hw_i2c_timing1)
+ mx28_reg(hw_i2c_timing2)
+ mx28_reg(hw_i2c_ctrl1)
+ mx28_reg(hw_i2c_stat)
+ mx28_reg(hw_i2c_queuectrl)
+ mx28_reg(hw_i2c_queuestat)
+ mx28_reg(hw_i2c_queuecmd)
+ mx28_reg(hw_i2c_queuedata)
+ mx28_reg(hw_i2c_data)
+ mx28_reg(hw_i2c_debug0)
+ mx28_reg(hw_i2c_debug1)
+ mx28_reg(hw_i2c_version)
+};
+#endif
+
+#define I2C_CTRL_SFTRST (1 << 31)
+#define I2C_CTRL_CLKGATE (1 << 30)
+#define I2C_CTRL_RUN (1 << 29)
+#define I2C_CTRL_PREACK (1 << 27)
+#define I2C_CTRL_ACKNOWLEDGE (1 << 26)
+#define I2C_CTRL_SEND_NAK_ON_LAST (1 << 25)
+#define I2C_CTRL_MULTI_MASTER (1 << 23)
+#define I2C_CTRL_CLOCK_HELD (1 << 22)
+#define I2C_CTRL_RETAIN_CLOCK (1 << 21)
+#define I2C_CTRL_POST_SEND_STOP (1 << 20)
+#define I2C_CTRL_PRE_SEND_START (1 << 19)
+#define I2C_CTRL_SLAVE_ADDRESS_ENABLE (1 << 18)
+#define I2C_CTRL_MASTER_MODE (1 << 17)
+#define I2C_CTRL_DIRECTION (1 << 16)
+#define I2C_CTRL_XFER_COUNT_MASK 0xffff
+#define I2C_CTRL_XFER_COUNT_OFFSET 0
+
+#define I2C_TIMING0_HIGH_COUNT_MASK (0x3ff << 16)
+#define I2C_TIMING0_HIGH_COUNT_OFFSET 16
+#define I2C_TIMING0_RCV_COUNT_MASK 0x3ff
+#define I2C_TIMING0_RCV_COUNT_OFFSET 0
+
+#define I2C_TIMING1_LOW_COUNT_MASK (0x3ff << 16)
+#define I2C_TIMING1_LOW_COUNT_OFFSET 16
+#define I2C_TIMING1_XMIT_COUNT_MASK 0x3ff
+#define I2C_TIMING1_XMIT_COUNT_OFFSET 0
+
+#define I2C_TIMING2_BUS_FREE_MASK (0x3ff << 16)
+#define I2C_TIMING2_BUS_FREE_OFFSET 16
+#define I2C_TIMING2_LEADIN_COUNT_MASK 0x3ff
+#define I2C_TIMING2_LEADIN_COUNT_OFFSET 0
+
+#define I2C_CTRL1_RD_QUEUE_IRQ (1 << 30)
+#define I2C_CTRL1_WR_QUEUE_IRQ (1 << 29)
+#define I2C_CTRL1_CLR_GOT_A_NAK (1 << 28)
+#define I2C_CTRL1_ACK_MODE (1 << 27)
+#define I2C_CTRL1_FORCE_DATA_IDLE (1 << 26)
+#define I2C_CTRL1_FORCE_CLK_IDLE (1 << 25)
+#define I2C_CTRL1_BCAST_SLAVE_EN (1 << 24)
+#define I2C_CTRL1_SLAVE_ADDRESS_BYTE_MASK (0xff << 16)
+#define I2C_CTRL1_SLAVE_ADDRESS_BYTE_OFFSET 16
+#define I2C_CTRL1_BUS_FREE_IRQ_EN (1 << 15)
+#define I2C_CTRL1_DATA_ENGINE_CMPLT_IRQ_EN (1 << 14)
+#define I2C_CTRL1_NO_SLAVE_ACK_IRQ_EN (1 << 13)
+#define I2C_CTRL1_OVERSIZE_XFER_TERM_IRQ_EN (1 << 12)
+#define I2C_CTRL1_EARLY_TERM_IRQ_EN (1 << 11)
+#define I2C_CTRL1_MASTER_LOSS_IRQ_EN (1 << 10)
+#define I2C_CTRL1_SLAVE_STOP_IRQ_EN (1 << 9)
+#define I2C_CTRL1_SLAVE_IRQ_EN (1 << 8)
+#define I2C_CTRL1_BUS_FREE_IRQ (1 << 7)
+#define I2C_CTRL1_DATA_ENGINE_CMPLT_IRQ (1 << 6)
+#define I2C_CTRL1_NO_SLAVE_ACK_IRQ (1 << 5)
+#define I2C_CTRL1_OVERSIZE_XFER_TERM_IRQ (1 << 4)
+#define I2C_CTRL1_EARLY_TERM_IRQ (1 << 3)
+#define I2C_CTRL1_MASTER_LOSS_IRQ (1 << 2)
+#define I2C_CTRL1_SLAVE_STOP_IRQ (1 << 1)
+#define I2C_CTRL1_SLAVE_IRQ (1 << 0)
+
+#define I2C_STAT_MASTER_PRESENT (1 << 31)
+#define I2C_STAT_SLAVE_PRESENT (1 << 30)
+#define I2C_STAT_ANY_ENABLED_IRQ (1 << 29)
+#define I2C_STAT_GOT_A_NAK (1 << 28)
+#define I2C_STAT_RCVD_SLAVE_ADDR_MASK (0xff << 16)
+#define I2C_STAT_RCVD_SLAVE_ADDR_OFFSET 16
+#define I2C_STAT_SLAVE_ADDR_EQ_ZERO (1 << 15)
+#define I2C_STAT_SLAVE_FOUND (1 << 14)
+#define I2C_STAT_SLAVE_SEARCHING (1 << 13)
+#define I2C_STAT_DATA_ENGING_DMA_WAIT (1 << 12)
+#define I2C_STAT_BUS_BUSY (1 << 11)
+#define I2C_STAT_CLK_GEN_BUSY (1 << 10)
+#define I2C_STAT_DATA_ENGINE_BUSY (1 << 9)
+#define I2C_STAT_SLAVE_BUSY (1 << 8)
+#define I2C_STAT_BUS_FREE_IRQ_SUMMARY (1 << 7)
+#define I2C_STAT_DATA_ENGINE_CMPLT_IRQ_SUMMARY (1 << 6)
+#define I2C_STAT_NO_SLAVE_ACK_IRQ_SUMMARY (1 << 5)
+#define I2C_STAT_OVERSIZE_XFER_TERM_IRQ_SUMMARY (1 << 4)
+#define I2C_STAT_EARLY_TERM_IRQ_SUMMARY (1 << 3)
+#define I2C_STAT_MASTER_LOSS_IRQ_SUMMARY (1 << 2)
+#define I2C_STAT_SLAVE_STOP_IRQ_SUMMARY (1 << 1)
+#define I2C_STAT_SLAVE_IRQ_SUMMARY (1 << 0)
+
+#define I2C_QUEUECTRL_RD_THRESH_MASK (0x1f << 16)
+#define I2C_QUEUECTRL_RD_THRESH_OFFSET 16
+#define I2C_QUEUECTRL_WR_THRESH_MASK (0x1f << 8)
+#define I2C_QUEUECTRL_WR_THRESH_OFFSET 8
+#define I2C_QUEUECTRL_QUEUE_RUN (1 << 5)
+#define I2C_QUEUECTRL_RD_CLEAR (1 << 4)
+#define I2C_QUEUECTRL_WR_CLEAR (1 << 3)
+#define I2C_QUEUECTRL_PIO_QUEUE_MODE (1 << 2)
+#define I2C_QUEUECTRL_RD_QUEUE_IRQ_EN (1 << 1)
+#define I2C_QUEUECTRL_WR_QUEUE_IRQ_EN (1 << 0)
+
+#define I2C_QUEUESTAT_RD_QUEUE_FULL (1 << 14)
+#define I2C_QUEUESTAT_RD_QUEUE_EMPTY (1 << 13)
+#define I2C_QUEUESTAT_RD_QUEUE_CNT_MASK (0x1f << 8)
+#define I2C_QUEUESTAT_RD_QUEUE_CNT_OFFSET 8
+#define I2C_QUEUESTAT_WR_QUEUE_FULL (1 << 6)
+#define I2C_QUEUESTAT_WR_QUEUE_EMPTY (1 << 5)
+#define I2C_QUEUESTAT_WR_QUEUE_CNT_MASK 0x1f
+#define I2C_QUEUESTAT_WR_QUEUE_CNT_OFFSET 0
+
+#define I2C_QUEUECMD_PREACK (1 << 27)
+#define I2C_QUEUECMD_ACKNOWLEDGE (1 << 26)
+#define I2C_QUEUECMD_SEND_NAK_ON_LAST (1 << 25)
+#define I2C_QUEUECMD_MULTI_MASTER (1 << 23)
+#define I2C_QUEUECMD_CLOCK_HELD (1 << 22)
+#define I2C_QUEUECMD_RETAIN_CLOCK (1 << 21)
+#define I2C_QUEUECMD_POST_SEND_STOP (1 << 20)
+#define I2C_QUEUECMD_PRE_SEND_START (1 << 19)
+#define I2C_QUEUECMD_SLAVE_ADDRESS_ENABLE (1 << 18)
+#define I2C_QUEUECMD_MASTER_MODE (1 << 17)
+#define I2C_QUEUECMD_DIRECTION (1 << 16)
+#define I2C_QUEUECMD_XFER_COUNT_MASK 0xffff
+#define I2C_QUEUECMD_XFER_COUNT_OFFSET 0
+
+#define I2C_QUEUEDATA_DATA_MASK 0xffffffff
+#define I2C_QUEUEDATA_DATA_OFFSET 0
+
+#define I2C_DATA_DATA_MASK 0xffffffff
+#define I2C_DATA_DATA_OFFSET 0
+
+#define I2C_DEBUG0_DMAREQ (1 << 31)
+#define I2C_DEBUG0_DMAENDCMD (1 << 30)
+#define I2C_DEBUG0_DMAKICK (1 << 29)
+#define I2C_DEBUG0_DMATERMINATE (1 << 28)
+#define I2C_DEBUG0_STATE_VALUE_MASK (0x3 << 26)
+#define I2C_DEBUG0_STATE_VALUE_OFFSET 26
+#define I2C_DEBUG0_DMA_STATE_MASK (0x3ff << 16)
+#define I2C_DEBUG0_DMA_STATE_OFFSET 16
+#define I2C_DEBUG0_START_TOGGLE (1 << 15)
+#define I2C_DEBUG0_STOP_TOGGLE (1 << 14)
+#define I2C_DEBUG0_GRAB_TOGGLE (1 << 13)
+#define I2C_DEBUG0_CHANGE_TOGGLE (1 << 12)
+#define I2C_DEBUG0_STATE_LATCH (1 << 11)
+#define I2C_DEBUG0_SLAVE_HOLD_CLK (1 << 10)
+#define I2C_DEBUG0_STATE_STATE_MASK 0x3ff
+#define I2C_DEBUG0_STATE_STATE_OFFSET 0
+
+#define I2C_DEBUG1_I2C_CLK_IN (1 << 31)
+#define I2C_DEBUG1_I2C_DATA_IN (1 << 30)
+#define I2C_DEBUG1_DMA_BYTE_ENABLES_MASK (0xf << 24)
+#define I2C_DEBUG1_DMA_BYTE_ENABLES_OFFSET 24
+#define I2C_DEBUG1_CLK_GEN_STATE_MASK (0xff << 16)
+#define I2C_DEBUG1_CLK_GEN_STATE_OFFSET 16
+#define I2C_DEBUG1_LST_MODE_MASK (0x3 << 9)
+#define I2C_DEBUG1_LST_MODE_OFFSET 9
+#define I2C_DEBUG1_LOCAL_SLAVE_TEST (1 << 8)
+#define I2C_DEBUG1_FORCE_CLK_ON (1 << 4)
+#define I2C_DEBUG1_FORCE_ABR_LOSS (1 << 3)
+#define I2C_DEBUG1_FORCE_RCV_ACK (1 << 2)
+#define I2C_DEBUG1_FORCE_I2C_DATA_OE (1 << 1)
+#define I2C_DEBUG1_FORCE_I2C_CLK_OE (1 << 0)
+
+#define I2C_VERSION_MAJOR_MASK (0xff << 24)
+#define I2C_VERSION_MAJOR_OFFSET 24
+#define I2C_VERSION_MINOR_MASK (0xff << 16)
+#define I2C_VERSION_MINOR_OFFSET 16
+#define I2C_VERSION_STEP_MASK 0xffff
+#define I2C_VERSION_STEP_OFFSET 0
+
+#endif /* __MX28_REGS_I2C_H__ */
diff --git a/arch/arm/include/asm/arch-mx28/regs-ocotp.h b/arch/arm/include/asm/arch-mx28/regs-ocotp.h
new file mode 100644
index 0000000..ea2fd7b
--- /dev/null
+++ b/arch/arm/include/asm/arch-mx28/regs-ocotp.h
@@ -0,0 +1,173 @@
+/*
+ * Freescale i.MX28 OCOTP Register Definitions
+ *
+ * Copyright (C) 2011 Marek Vasut <marek.vasut at gmail.com>
+ * on behalf of DENX Software Engineering GmbH
+ *
+ * Based on code from LTIB:
+ * Copyright 2008-2010 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#ifndef __MX28_REGS_OCOTP_H__
+#define __MX28_REGS_OCOTP_H__
+
+#include <asm/arch/regs-common.h>
+
+#ifndef __ASSEMBLY__
+struct mx28_ocotp_regs {
+ mx28_reg(hw_ocotp_ctrl) /* 0x0 */
+ mx28_reg(hw_ocotp_data) /* 0x10 */
+ mx28_reg(hw_ocotp_cust0) /* 0x20 */
+ mx28_reg(hw_ocotp_cust1) /* 0x30 */
+ mx28_reg(hw_ocotp_cust2) /* 0x40 */
+ mx28_reg(hw_ocotp_cust3) /* 0x50 */
+ mx28_reg(hw_ocotp_crypto0) /* 0x60 */
+ mx28_reg(hw_ocotp_crypto1) /* 0x70 */
+ mx28_reg(hw_ocotp_crypto2) /* 0x80 */
+ mx28_reg(hw_ocotp_crypto3) /* 0x90 */
+ mx28_reg(hw_ocotp_hwcap0) /* 0xa0 */
+ mx28_reg(hw_ocotp_hwcap1) /* 0xb0 */
+ mx28_reg(hw_ocotp_hwcap2) /* 0xc0 */
+ mx28_reg(hw_ocotp_hwcap3) /* 0xd0 */
+ mx28_reg(hw_ocotp_hwcap4) /* 0xe0 */
+ mx28_reg(hw_ocotp_hwcap5) /* 0xf0 */
+ mx28_reg(hw_ocotp_swcap) /* 0x100 */
+ mx28_reg(hw_ocotp_custcap) /* 0x110 */
+ mx28_reg(hw_ocotp_lock) /* 0x120 */
+ mx28_reg(hw_ocotp_ops0) /* 0x130 */
+ mx28_reg(hw_ocotp_ops1) /* 0x140 */
+ mx28_reg(hw_ocotp_ops2) /* 0x150 */
+ mx28_reg(hw_ocotp_ops3) /* 0x160 */
+ mx28_reg(hw_ocotp_un0) /* 0x170 */
+ mx28_reg(hw_ocotp_un1) /* 0x180 */
+ mx28_reg(hw_ocotp_un2) /* 0x190 */
+ mx28_reg(hw_ocotp_rom0) /* 0x1a0 */
+ mx28_reg(hw_ocotp_rom1) /* 0x1b0 */
+ mx28_reg(hw_ocotp_rom2) /* 0x1c0 */
+ mx28_reg(hw_ocotp_rom3) /* 0x1d0 */
+ mx28_reg(hw_ocotp_rom4) /* 0x1e0 */
+ mx28_reg(hw_ocotp_rom5) /* 0x1f0 */
+ mx28_reg(hw_ocotp_rom6) /* 0x200 */
+ mx28_reg(hw_ocotp_rom7) /* 0x210 */
+ mx28_reg(hw_ocotp_srk0) /* 0x220 */
+ mx28_reg(hw_ocotp_srk1) /* 0x230 */
+ mx28_reg(hw_ocotp_srk2) /* 0x240 */
+ mx28_reg(hw_ocotp_srk3) /* 0x250 */
+ mx28_reg(hw_ocotp_srk4) /* 0x260 */
+ mx28_reg(hw_ocotp_srk5) /* 0x270 */
+ mx28_reg(hw_ocotp_srk6) /* 0x280 */
+ mx28_reg(hw_ocotp_srk7) /* 0x290 */
+ mx28_reg(hw_ocotp_version) /* 0x2a0 */
+};
+#endif
+
+#define OCOTP_CTRL_WR_UNLOCK_MASK (0xffff << 16)
+#define OCOTP_CTRL_WR_UNLOCK_OFFSET 16
+#define OCOTP_CTRL_WR_UNLOCK_KEY (0x3e77 << 16)
+#define OCOTP_CTRL_RELOAD_SHADOWS (1 << 13)
+#define OCOTP_CTRL_RD_BANK_OPEN (1 << 12)
+#define OCOTP_CTRL_ERROR (1 << 9)
+#define OCOTP_CTRL_BUSY (1 << 8)
+#define OCOTP_CTRL_ADDR_MASK 0x3f
+#define OCOTP_CTRL_ADDR_OFFSET 0
+
+#define OCOTP_DATA_DATA_MASK 0xffffffff
+#define OCOTP_DATA_DATA_OFFSET 0
+
+#define OCOTP_CUST_BITS_MASK 0xffffffff
+#define OCOTP_CUST_BITS_OFFSET 0
+
+#define OCOTP_CRYPTO_BITS_MASK 0xffffffff
+#define OCOTP_CRYPTO_BITS_OFFSET 0
+
+#define OCOTP_HWCAP_BITS_MASK 0xffffffff
+#define OCOTP_HWCAP_BITS_OFFSET 0
+
+#define OCOTP_SWCAP_BITS_MASK 0xffffffff
+#define OCOTP_SWCAP_BITS_OFFSET 0
+
+#define OCOTP_CUSTCAP_RTC_XTAL_32768_PRESENT (1 << 2)
+#define OCOTP_CUSTCAP_RTC_XTAL_32000_PRESENT (1 << 1)
+
+#define OCOTP_LOCK_ROM7 (1 << 31)
+#define OCOTP_LOCK_ROM6 (1 << 30)
+#define OCOTP_LOCK_ROM5 (1 << 29)
+#define OCOTP_LOCK_ROM4 (1 << 28)
+#define OCOTP_LOCK_ROM3 (1 << 27)
+#define OCOTP_LOCK_ROM2 (1 << 26)
+#define OCOTP_LOCK_ROM1 (1 << 25)
+#define OCOTP_LOCK_ROM0 (1 << 24)
+#define OCOTP_LOCK_HWSW_SHADOW_ALT (1 << 23)
+#define OCOTP_LOCK_CRYPTODCP_ALT (1 << 22)
+#define OCOTP_LOCK_CRYPTOKEY_ALT (1 << 21)
+#define OCOTP_LOCK_PIN (1 << 20)
+#define OCOTP_LOCK_OPS (1 << 19)
+#define OCOTP_LOCK_UN2 (1 << 18)
+#define OCOTP_LOCK_UN1 (1 << 17)
+#define OCOTP_LOCK_UN0 (1 << 16)
+#define OCOTP_LOCK_SRK (1 << 15)
+#define OCOTP_LOCK_UNALLOCATED_MASK (0x7 << 12)
+#define OCOTP_LOCK_UNALLOCATED_OFFSET 12
+#define OCOTP_LOCK_SRK_SHADOW (1 << 11)
+#define OCOTP_LOCK_ROM_SHADOW (1 << 10)
+#define OCOTP_LOCK_CUSTCAP (1 << 9)
+#define OCOTP_LOCK_HWSW (1 << 8)
+#define OCOTP_LOCK_CUSTCAP_SHADOW (1 << 7)
+#define OCOTP_LOCK_HWSW_SHADOW (1 << 6)
+#define OCOTP_LOCK_CRYPTODCP (1 << 5)
+#define OCOTP_LOCK_CRYPTOKEY (1 << 4)
+#define OCOTP_LOCK_CUST3 (1 << 3)
+#define OCOTP_LOCK_CUST2 (1 << 2)
+#define OCOTP_LOCK_CUST1 (1 << 1)
+#define OCOTP_LOCK_CUST0 (1 << 0)
+
+#define OCOTP_OPS_BITS_MASK 0xffffffff
+#define OCOTP_OPS_BITS_OFFSET 0
+
+#define OCOTP_UN_BITS_MASK 0xffffffff
+#define OCOTP_UN_BITS_OFFSET 0
+
+#define OCOTP_ROM_BOOT_MODE_MASK (0xff << 24)
+#define OCOTP_ROM_BOOT_MODE_OFFSET 24
+#define OCOTP_ROM_SD_MMC_MODE_MASK (0x3 << 22)
+#define OCOTP_ROM_SD_MMC_MODE_OFFSET 22
+#define OCOTP_ROM_SD_POWER_GATE_GPIO_MASK (0x3 << 20)
+#define OCOTP_ROM_SD_POWER_GATE_GPIO_OFFSET 20
+#define OCOTP_ROM_SD_POWER_UP_DELAY_MASK (0x3f << 14)
+#define OCOTP_ROM_SD_POWER_UP_DELAY_OFFSET 14
+#define OCOTP_ROM_SD_BUS_WIDTH_MASK (0x3 << 12)
+#define OCOTP_ROM_SD_BUS_WIDTH_OFFSET 12
+#define OCOTP_ROM_SSP_SCK_INDEX_MASK (0xf << 8)
+#define OCOTP_ROM_SSP_SCK_INDEX_OFFSET 8
+#define OCOTP_ROM_EMMC_USE_DDR (1 << 7)
+#define OCOTP_ROM_DISABLE_SPI_NOR_FAST_READ (1 << 6)
+#define OCOTP_ROM_ENABLE_USB_BOOT_SERIAL_NUM (1 << 5)
+#define OCOTP_ROM_ENABLE_UNENCRYPTED_BOOT (1 << 4)
+#define OCOTP_ROM_SD_MBR_BOOT (1 << 3)
+
+#define OCOTP_SRK_BITS_MASK 0xffffffff
+#define OCOTP_SRK_BITS_OFFSET 0
+
+#define OCOTP_VERSION_MAJOR_MASK (0xff << 24)
+#define OCOTP_VERSION_MAJOR_OFFSET 24
+#define OCOTP_VERSION_MINOR_MASK (0xff << 16)
+#define OCOTP_VERSION_MINOR_OFFSET 16
+#define OCOTP_VERSION_STEP_MASK 0xffff
+#define OCOTP_VERSION_STEP_OFFSET 0
+
+#endif /* __MX28_REGS_OCOTP_H__ */
diff --git a/arch/arm/include/asm/arch-mx28/regs-pinctrl.h b/arch/arm/include/asm/arch-mx28/regs-pinctrl.h
new file mode 100644
index 0000000..73739ca
--- /dev/null
+++ b/arch/arm/include/asm/arch-mx28/regs-pinctrl.h
@@ -0,0 +1,1284 @@
+/*
+ * Freescale i.MX28 PINCTRL Register Definitions
+ *
+ * Copyright (C) 2011 Marek Vasut <marek.vasut at gmail.com>
+ * on behalf of DENX Software Engineering GmbH
+ *
+ * Based on code from LTIB:
+ * Copyright 2008-2010 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#ifndef __MX28_REGS_PINCTRL_H__
+#define __MX28_REGS_PINCTRL_H__
+
+#include <asm/arch/regs-common.h>
+
+#ifndef __ASSEMBLY__
+struct mx28_pinctrl_regs {
+ mx28_reg(hw_pinctrl_ctrl) /* 0x0 */
+
+ uint32_t reserved1[60];
+
+ mx28_reg(hw_pinctrl_muxsel0) /* 0x100 */
+ mx28_reg(hw_pinctrl_muxsel1) /* 0x110 */
+ mx28_reg(hw_pinctrl_muxsel2) /* 0x120 */
+ mx28_reg(hw_pinctrl_muxsel3) /* 0x130 */
+ mx28_reg(hw_pinctrl_muxsel4) /* 0x140 */
+ mx28_reg(hw_pinctrl_muxsel5) /* 0x150 */
+ mx28_reg(hw_pinctrl_muxsel6) /* 0x160 */
+ mx28_reg(hw_pinctrl_muxsel7) /* 0x170 */
+ mx28_reg(hw_pinctrl_muxsel8) /* 0x180 */
+ mx28_reg(hw_pinctrl_muxsel9) /* 0x190 */
+ mx28_reg(hw_pinctrl_muxsel10) /* 0x1a0 */
+ mx28_reg(hw_pinctrl_muxsel11) /* 0x1b0 */
+ mx28_reg(hw_pinctrl_muxsel12) /* 0x1c0 */
+ mx28_reg(hw_pinctrl_muxsel13) /* 0x1d0 */
+
+ uint32_t reserved2[72];
+
+ mx28_reg(hw_pinctrl_drive0) /* 0x300 */
+ mx28_reg(hw_pinctrl_drive1) /* 0x310 */
+ mx28_reg(hw_pinctrl_drive2) /* 0x320 */
+ mx28_reg(hw_pinctrl_drive3) /* 0x330 */
+ mx28_reg(hw_pinctrl_drive4) /* 0x340 */
+ mx28_reg(hw_pinctrl_drive5) /* 0x350 */
+ mx28_reg(hw_pinctrl_drive6) /* 0x360 */
+ mx28_reg(hw_pinctrl_drive7) /* 0x370 */
+ mx28_reg(hw_pinctrl_drive8) /* 0x380 */
+ mx28_reg(hw_pinctrl_drive9) /* 0x390 */
+ mx28_reg(hw_pinctrl_drive10) /* 0x3a0 */
+ mx28_reg(hw_pinctrl_drive11) /* 0x3b0 */
+ mx28_reg(hw_pinctrl_drive12) /* 0x3c0 */
+ mx28_reg(hw_pinctrl_drive13) /* 0x3d0 */
+ mx28_reg(hw_pinctrl_drive14) /* 0x3e0 */
+ mx28_reg(hw_pinctrl_drive15) /* 0x3f0 */
+ mx28_reg(hw_pinctrl_drive16) /* 0x400 */
+ mx28_reg(hw_pinctrl_drive17) /* 0x410 */
+ mx28_reg(hw_pinctrl_drive18) /* 0x420 */
+ mx28_reg(hw_pinctrl_drive19) /* 0x430 */
+
+ uint32_t reserved3[112];
+
+ mx28_reg(hw_pinctrl_pull0) /* 0x600 */
+ mx28_reg(hw_pinctrl_pull1) /* 0x610 */
+ mx28_reg(hw_pinctrl_pull2) /* 0x620 */
+ mx28_reg(hw_pinctrl_pull3) /* 0x630 */
+ mx28_reg(hw_pinctrl_pull4) /* 0x640 */
+ mx28_reg(hw_pinctrl_pull5) /* 0x650 */
+ mx28_reg(hw_pinctrl_pull6) /* 0x660 */
+
+ uint32_t reserved4[36];
+
+ mx28_reg(hw_pinctrl_dout0) /* 0x700 */
+ mx28_reg(hw_pinctrl_dout1) /* 0x710 */
+ mx28_reg(hw_pinctrl_dout2) /* 0x720 */
+ mx28_reg(hw_pinctrl_dout3) /* 0x730 */
+ mx28_reg(hw_pinctrl_dout4) /* 0x740 */
+
+ uint32_t reserved5[108];
+
+ mx28_reg(hw_pinctrl_din0) /* 0x900 */
+ mx28_reg(hw_pinctrl_din1) /* 0x910 */
+ mx28_reg(hw_pinctrl_din2) /* 0x920 */
+ mx28_reg(hw_pinctrl_din3) /* 0x930 */
+ mx28_reg(hw_pinctrl_din4) /* 0x940 */
+
+ uint32_t reserved6[108];
+
+ mx28_reg(hw_pinctrl_doe0) /* 0xb00 */
+ mx28_reg(hw_pinctrl_doe1) /* 0xb10 */
+ mx28_reg(hw_pinctrl_doe2) /* 0xb20 */
+ mx28_reg(hw_pinctrl_doe3) /* 0xb30 */
+ mx28_reg(hw_pinctrl_doe4) /* 0xb40 */
+
+ uint32_t reserved7[300];
+
+ mx28_reg(hw_pinctrl_pin2irq0) /* 0x1000 */
+ mx28_reg(hw_pinctrl_pin2irq1) /* 0x1010 */
+ mx28_reg(hw_pinctrl_pin2irq2) /* 0x1020 */
+ mx28_reg(hw_pinctrl_pin2irq3) /* 0x1030 */
+ mx28_reg(hw_pinctrl_pin2irq4) /* 0x1040 */
+
+ uint32_t reserved8[44];
+
+ mx28_reg(hw_pinctrl_irqen0) /* 0x1100 */
+ mx28_reg(hw_pinctrl_irqen1) /* 0x1110 */
+ mx28_reg(hw_pinctrl_irqen2) /* 0x1120 */
+ mx28_reg(hw_pinctrl_irqen3) /* 0x1130 */
+ mx28_reg(hw_pinctrl_irqen4) /* 0x1140 */
+
+ uint32_t reserved9[44];
+
+ mx28_reg(hw_pinctrl_irqlevel0) /* 0x1200 */
+ mx28_reg(hw_pinctrl_irqlevel1) /* 0x1210 */
+ mx28_reg(hw_pinctrl_irqlevel2) /* 0x1220 */
+ mx28_reg(hw_pinctrl_irqlevel3) /* 0x1230 */
+ mx28_reg(hw_pinctrl_irqlevel4) /* 0x1240 */
+
+ uint32_t reserved10[44];
+
+ mx28_reg(hw_pinctrl_irqpol0) /* 0x1300 */
+ mx28_reg(hw_pinctrl_irqpol1) /* 0x1310 */
+ mx28_reg(hw_pinctrl_irqpol2) /* 0x1320 */
+ mx28_reg(hw_pinctrl_irqpol3) /* 0x1330 */
+ mx28_reg(hw_pinctrl_irqpol4) /* 0x1340 */
+
+ uint32_t reserved11[44];
+
+ mx28_reg(hw_pinctrl_irqstat0) /* 0x1400 */
+ mx28_reg(hw_pinctrl_irqstat1) /* 0x1410 */
+ mx28_reg(hw_pinctrl_irqstat2) /* 0x1420 */
+ mx28_reg(hw_pinctrl_irqstat3) /* 0x1430 */
+ mx28_reg(hw_pinctrl_irqstat4) /* 0x1440 */
+
+ uint32_t reserved12[380];
+
+ mx28_reg(hw_pinctrl_emi_odt_ctrl) /* 0x1a40 */
+
+ uint32_t reserved13[76];
+
+ mx28_reg(hw_pinctrl_emi_ds_ctrl) /* 0x1b80 */
+};
+#endif
+
+#define PINCTRL_CTRL_SFTRST (1 << 31)
+#define PINCTRL_CTRL_CLKGATE (1 << 30)
+#define PINCTRL_CTRL_PRESENT4 (1 << 24)
+#define PINCTRL_CTRL_PRESENT3 (1 << 23)
+#define PINCTRL_CTRL_PRESENT2 (1 << 22)
+#define PINCTRL_CTRL_PRESENT1 (1 << 21)
+#define PINCTRL_CTRL_PRESENT0 (1 << 20)
+#define PINCTRL_CTRL_IRQOUT4 (1 << 4)
+#define PINCTRL_CTRL_IRQOUT3 (1 << 3)
+#define PINCTRL_CTRL_IRQOUT2 (1 << 2)
+#define PINCTRL_CTRL_IRQOUT1 (1 << 1)
+#define PINCTRL_CTRL_IRQOUT0 (1 << 0)
+
+#define PINCTRL_MUXSEL0_BANK0_PIN07_MASK (0x3 << 14)
+#define PINCTRL_MUXSEL0_BANK0_PIN07_OFFSET 14
+#define PINCTRL_MUXSEL0_BANK0_PIN06_MASK (0x3 << 12)
+#define PINCTRL_MUXSEL0_BANK0_PIN06_OFFSET 12
+#define PINCTRL_MUXSEL0_BANK0_PIN05_MASK (0x3 << 10)
+#define PINCTRL_MUXSEL0_BANK0_PIN05_OFFSET 10
+#define PINCTRL_MUXSEL0_BANK0_PIN04_MASK (0x3 << 8)
+#define PINCTRL_MUXSEL0_BANK0_PIN04_OFFSET 8
+#define PINCTRL_MUXSEL0_BANK0_PIN03_MASK (0x3 << 6)
+#define PINCTRL_MUXSEL0_BANK0_PIN03_OFFSET 6
+#define PINCTRL_MUXSEL0_BANK0_PIN02_MASK (0x3 << 4)
+#define PINCTRL_MUXSEL0_BANK0_PIN02_OFFSET 4
+#define PINCTRL_MUXSEL0_BANK0_PIN01_MASK (0x3 << 2)
+#define PINCTRL_MUXSEL0_BANK0_PIN01_OFFSET 2
+#define PINCTRL_MUXSEL0_BANK0_PIN00_MASK (0x3 << 0)
+#define PINCTRL_MUXSEL0_BANK0_PIN00_OFFSET 0
+
+#define PINCTRL_MUXSEL1_BANK0_PIN28_MASK (0x3 << 24)
+#define PINCTRL_MUXSEL1_BANK0_PIN28_OFFSET 24
+#define PINCTRL_MUXSEL1_BANK0_PIN27_MASK (0x3 << 22)
+#define PINCTRL_MUXSEL1_BANK0_PIN27_OFFSET 22
+#define PINCTRL_MUXSEL1_BANK0_PIN26_MASK (0x3 << 20)
+#define PINCTRL_MUXSEL1_BANK0_PIN26_OFFSET 20
+#define PINCTRL_MUXSEL1_BANK0_PIN25_MASK (0x3 << 18)
+#define PINCTRL_MUXSEL1_BANK0_PIN25_OFFSET 18
+#define PINCTRL_MUXSEL1_BANK0_PIN24_MASK (0x3 << 16)
+#define PINCTRL_MUXSEL1_BANK0_PIN24_OFFSET 16
+#define PINCTRL_MUXSEL1_BANK0_PIN23_MASK (0x3 << 14)
+#define PINCTRL_MUXSEL1_BANK0_PIN23_OFFSET 14
+#define PINCTRL_MUXSEL1_BANK0_PIN22_MASK (0x3 << 12)
+#define PINCTRL_MUXSEL1_BANK0_PIN22_OFFSET 12
+#define PINCTRL_MUXSEL1_BANK0_PIN21_MASK (0x3 << 10)
+#define PINCTRL_MUXSEL1_BANK0_PIN21_OFFSET 10
+#define PINCTRL_MUXSEL1_BANK0_PIN20_MASK (0x3 << 8)
+#define PINCTRL_MUXSEL1_BANK0_PIN20_OFFSET 8
+#define PINCTRL_MUXSEL1_BANK0_PIN19_MASK (0x3 << 6)
+#define PINCTRL_MUXSEL1_BANK0_PIN19_OFFSET 6
+#define PINCTRL_MUXSEL1_BANK0_PIN18_MASK (0x3 << 4)
+#define PINCTRL_MUXSEL1_BANK0_PIN18_OFFSET 4
+#define PINCTRL_MUXSEL1_BANK0_PIN17_MASK (0x3 << 2)
+#define PINCTRL_MUXSEL1_BANK0_PIN17_OFFSET 2
+#define PINCTRL_MUXSEL1_BANK0_PIN16_MASK (0x3 << 0)
+#define PINCTRL_MUXSEL1_BANK0_PIN16_OFFSET 0
+
+#define PINCTRL_MUXSEL2_BANK1_PIN15_MASK (0x3 << 30)
+#define PINCTRL_MUXSEL2_BANK1_PIN15_OFFSET 30
+#define PINCTRL_MUXSEL2_BANK1_PIN14_MASK (0x3 << 28)
+#define PINCTRL_MUXSEL2_BANK1_PIN14_OFFSET 28
+#define PINCTRL_MUXSEL2_BANK1_PIN13_MASK (0x3 << 26)
+#define PINCTRL_MUXSEL2_BANK1_PIN13_OFFSET 26
+#define PINCTRL_MUXSEL2_BANK1_PIN12_MASK (0x3 << 24)
+#define PINCTRL_MUXSEL2_BANK1_PIN12_OFFSET 24
+#define PINCTRL_MUXSEL2_BANK1_PIN11_MASK (0x3 << 22)
+#define PINCTRL_MUXSEL2_BANK1_PIN11_OFFSET 22
+#define PINCTRL_MUXSEL2_BANK1_PIN10_MASK (0x3 << 20)
+#define PINCTRL_MUXSEL2_BANK1_PIN10_OFFSET 20
+#define PINCTRL_MUXSEL2_BANK1_PIN09_MASK (0x3 << 18)
+#define PINCTRL_MUXSEL2_BANK1_PIN09_OFFSET 18
+#define PINCTRL_MUXSEL2_BANK1_PIN08_MASK (0x3 << 16)
+#define PINCTRL_MUXSEL2_BANK1_PIN08_OFFSET 16
+#define PINCTRL_MUXSEL2_BANK1_PIN07_MASK (0x3 << 14)
+#define PINCTRL_MUXSEL2_BANK1_PIN07_OFFSET 14
+#define PINCTRL_MUXSEL2_BANK1_PIN06_MASK (0x3 << 12)
+#define PINCTRL_MUXSEL2_BANK1_PIN06_OFFSET 12
+#define PINCTRL_MUXSEL2_BANK1_PIN05_MASK (0x3 << 10)
+#define PINCTRL_MUXSEL2_BANK1_PIN05_OFFSET 10
+#define PINCTRL_MUXSEL2_BANK1_PIN04_MASK (0x3 << 8)
+#define PINCTRL_MUXSEL2_BANK1_PIN04_OFFSET 8
+#define PINCTRL_MUXSEL2_BANK1_PIN03_MASK (0x3 << 6)
+#define PINCTRL_MUXSEL2_BANK1_PIN03_OFFSET 6
+#define PINCTRL_MUXSEL2_BANK1_PIN02_MASK (0x3 << 4)
+#define PINCTRL_MUXSEL2_BANK1_PIN02_OFFSET 4
+#define PINCTRL_MUXSEL2_BANK1_PIN01_MASK (0x3 << 2)
+#define PINCTRL_MUXSEL2_BANK1_PIN01_OFFSET 2
+#define PINCTRL_MUXSEL2_BANK1_PIN00_MASK (0x3 << 0)
+#define PINCTRL_MUXSEL2_BANK1_PIN00_OFFSET 0
+
+#define PINCTRL_MUXSEL3_BANK1_PIN31_MASK (0x3 << 30)
+#define PINCTRL_MUXSEL3_BANK1_PIN31_OFFSET 30
+#define PINCTRL_MUXSEL3_BANK1_PIN30_MASK (0x3 << 28)
+#define PINCTRL_MUXSEL3_BANK1_PIN30_OFFSET 28
+#define PINCTRL_MUXSEL3_BANK1_PIN29_MASK (0x3 << 26)
+#define PINCTRL_MUXSEL3_BANK1_PIN29_OFFSET 26
+#define PINCTRL_MUXSEL3_BANK1_PIN28_MASK (0x3 << 24)
+#define PINCTRL_MUXSEL3_BANK1_PIN28_OFFSET 24
+#define PINCTRL_MUXSEL3_BANK1_PIN27_MASK (0x3 << 22)
+#define PINCTRL_MUXSEL3_BANK1_PIN27_OFFSET 22
+#define PINCTRL_MUXSEL3_BANK1_PIN26_MASK (0x3 << 20)
+#define PINCTRL_MUXSEL3_BANK1_PIN26_OFFSET 20
+#define PINCTRL_MUXSEL3_BANK1_PIN25_MASK (0x3 << 18)
+#define PINCTRL_MUXSEL3_BANK1_PIN25_OFFSET 18
+#define PINCTRL_MUXSEL3_BANK1_PIN24_MASK (0x3 << 16)
+#define PINCTRL_MUXSEL3_BANK1_PIN24_OFFSET 16
+#define PINCTRL_MUXSEL3_BANK1_PIN23_MASK (0x3 << 14)
+#define PINCTRL_MUXSEL3_BANK1_PIN23_OFFSET 14
+#define PINCTRL_MUXSEL3_BANK1_PIN22_MASK (0x3 << 12)
+#define PINCTRL_MUXSEL3_BANK1_PIN22_OFFSET 12
+#define PINCTRL_MUXSEL3_BANK1_PIN21_MASK (0x3 << 10)
+#define PINCTRL_MUXSEL3_BANK1_PIN21_OFFSET 10
+#define PINCTRL_MUXSEL3_BANK1_PIN20_MASK (0x3 << 8)
+#define PINCTRL_MUXSEL3_BANK1_PIN20_OFFSET 8
+#define PINCTRL_MUXSEL3_BANK1_PIN19_MASK (0x3 << 6)
+#define PINCTRL_MUXSEL3_BANK1_PIN19_OFFSET 6
+#define PINCTRL_MUXSEL3_BANK1_PIN18_MASK (0x3 << 4)
+#define PINCTRL_MUXSEL3_BANK1_PIN18_OFFSET 4
+#define PINCTRL_MUXSEL3_BANK1_PIN17_MASK (0x3 << 2)
+#define PINCTRL_MUXSEL3_BANK1_PIN17_OFFSET 2
+#define PINCTRL_MUXSEL3_BANK1_PIN16_MASK (0x3 << 0)
+#define PINCTRL_MUXSEL3_BANK1_PIN16_OFFSET 0
+
+#define PINCTRL_MUXSEL4_BANK2_PIN15_MASK (0x3 << 30)
+#define PINCTRL_MUXSEL4_BANK2_PIN15_OFFSET 30
+#define PINCTRL_MUXSEL4_BANK2_PIN14_MASK (0x3 << 28)
+#define PINCTRL_MUXSEL4_BANK2_PIN14_OFFSET 28
+#define PINCTRL_MUXSEL4_BANK2_PIN13_MASK (0x3 << 26)
+#define PINCTRL_MUXSEL4_BANK2_PIN13_OFFSET 26
+#define PINCTRL_MUXSEL4_BANK2_PIN12_MASK (0x3 << 24)
+#define PINCTRL_MUXSEL4_BANK2_PIN12_OFFSET 24
+#define PINCTRL_MUXSEL4_BANK2_PIN10_MASK (0x3 << 20)
+#define PINCTRL_MUXSEL4_BANK2_PIN10_OFFSET 20
+#define PINCTRL_MUXSEL4_BANK2_PIN09_MASK (0x3 << 18)
+#define PINCTRL_MUXSEL4_BANK2_PIN09_OFFSET 18
+#define PINCTRL_MUXSEL4_BANK2_PIN08_MASK (0x3 << 16)
+#define PINCTRL_MUXSEL4_BANK2_PIN08_OFFSET 16
+#define PINCTRL_MUXSEL4_BANK2_PIN07_MASK (0x3 << 14)
+#define PINCTRL_MUXSEL4_BANK2_PIN07_OFFSET 14
+#define PINCTRL_MUXSEL4_BANK2_PIN06_MASK (0x3 << 12)
+#define PINCTRL_MUXSEL4_BANK2_PIN06_OFFSET 12
+#define PINCTRL_MUXSEL4_BANK2_PIN05_MASK (0x3 << 10)
+#define PINCTRL_MUXSEL4_BANK2_PIN05_OFFSET 10
+#define PINCTRL_MUXSEL4_BANK2_PIN04_MASK (0x3 << 8)
+#define PINCTRL_MUXSEL4_BANK2_PIN04_OFFSET 8
+#define PINCTRL_MUXSEL4_BANK2_PIN03_MASK (0x3 << 6)
+#define PINCTRL_MUXSEL4_BANK2_PIN03_OFFSET 6
+#define PINCTRL_MUXSEL4_BANK2_PIN02_MASK (0x3 << 4)
+#define PINCTRL_MUXSEL4_BANK2_PIN02_OFFSET 4
+#define PINCTRL_MUXSEL4_BANK2_PIN01_MASK (0x3 << 2)
+#define PINCTRL_MUXSEL4_BANK2_PIN01_OFFSET 2
+#define PINCTRL_MUXSEL4_BANK2_PIN00_MASK (0x3 << 0)
+#define PINCTRL_MUXSEL4_BANK2_PIN00_OFFSET 0
+
+#define PINCTRL_MUXSEL5_BANK2_PIN27_MASK (0x3 << 22)
+#define PINCTRL_MUXSEL5_BANK2_PIN27_OFFSET 22
+#define PINCTRL_MUXSEL5_BANK2_PIN26_MASK (0x3 << 20)
+#define PINCTRL_MUXSEL5_BANK2_PIN26_OFFSET 20
+#define PINCTRL_MUXSEL5_BANK2_PIN25_MASK (0x3 << 18)
+#define PINCTRL_MUXSEL5_BANK2_PIN25_OFFSET 18
+#define PINCTRL_MUXSEL5_BANK2_PIN24_MASK (0x3 << 16)
+#define PINCTRL_MUXSEL5_BANK2_PIN24_OFFSET 16
+#define PINCTRL_MUXSEL5_BANK2_PIN21_MASK (0x3 << 10)
+#define PINCTRL_MUXSEL5_BANK2_PIN21_OFFSET 10
+#define PINCTRL_MUXSEL5_BANK2_PIN20_MASK (0x3 << 8)
+#define PINCTRL_MUXSEL5_BANK2_PIN20_OFFSET 8
+#define PINCTRL_MUXSEL5_BANK2_PIN19_MASK (0x3 << 6)
+#define PINCTRL_MUXSEL5_BANK2_PIN19_OFFSET 6
+#define PINCTRL_MUXSEL5_BANK2_PIN18_MASK (0x3 << 4)
+#define PINCTRL_MUXSEL5_BANK2_PIN18_OFFSET 4
+#define PINCTRL_MUXSEL5_BANK2_PIN17_MASK (0x3 << 2)
+#define PINCTRL_MUXSEL5_BANK2_PIN17_OFFSET 2
+#define PINCTRL_MUXSEL5_BANK2_PIN16_MASK (0x3 << 0)
+#define PINCTRL_MUXSEL5_BANK2_PIN16_OFFSET 0
+
+#define PINCTRL_MUXSEL6_BANK3_PIN15_MASK (0x3 << 30)
+#define PINCTRL_MUXSEL6_BANK3_PIN15_OFFSET 30
+#define PINCTRL_MUXSEL6_BANK3_PIN14_MASK (0x3 << 28)
+#define PINCTRL_MUXSEL6_BANK3_PIN14_OFFSET 28
+#define PINCTRL_MUXSEL6_BANK3_PIN13_MASK (0x3 << 26)
+#define PINCTRL_MUXSEL6_BANK3_PIN13_OFFSET 26
+#define PINCTRL_MUXSEL6_BANK3_PIN12_MASK (0x3 << 24)
+#define PINCTRL_MUXSEL6_BANK3_PIN12_OFFSET 24
+#define PINCTRL_MUXSEL6_BANK3_PIN11_MASK (0x3 << 22)
+#define PINCTRL_MUXSEL6_BANK3_PIN11_OFFSET 22
+#define PINCTRL_MUXSEL6_BANK3_PIN10_MASK (0x3 << 20)
+#define PINCTRL_MUXSEL6_BANK3_PIN10_OFFSET 20
+#define PINCTRL_MUXSEL6_BANK3_PIN09_MASK (0x3 << 18)
+#define PINCTRL_MUXSEL6_BANK3_PIN09_OFFSET 18
+#define PINCTRL_MUXSEL6_BANK3_PIN08_MASK (0x3 << 16)
+#define PINCTRL_MUXSEL6_BANK3_PIN08_OFFSET 16
+#define PINCTRL_MUXSEL6_BANK3_PIN07_MASK (0x3 << 14)
+#define PINCTRL_MUXSEL6_BANK3_PIN07_OFFSET 14
+#define PINCTRL_MUXSEL6_BANK3_PIN06_MASK (0x3 << 12)
+#define PINCTRL_MUXSEL6_BANK3_PIN06_OFFSET 12
+#define PINCTRL_MUXSEL6_BANK3_PIN05_MASK (0x3 << 10)
+#define PINCTRL_MUXSEL6_BANK3_PIN05_OFFSET 10
+#define PINCTRL_MUXSEL6_BANK3_PIN04_MASK (0x3 << 8)
+#define PINCTRL_MUXSEL6_BANK3_PIN04_OFFSET 8
+#define PINCTRL_MUXSEL6_BANK3_PIN03_MASK (0x3 << 6)
+#define PINCTRL_MUXSEL6_BANK3_PIN03_OFFSET 6
+#define PINCTRL_MUXSEL6_BANK3_PIN02_MASK (0x3 << 4)
+#define PINCTRL_MUXSEL6_BANK3_PIN02_OFFSET 4
+#define PINCTRL_MUXSEL6_BANK3_PIN01_MASK (0x3 << 2)
+#define PINCTRL_MUXSEL6_BANK3_PIN01_OFFSET 2
+#define PINCTRL_MUXSEL6_BANK3_PIN00_MASK (0x3 << 0)
+#define PINCTRL_MUXSEL6_BANK3_PIN00_OFFSET 0
+
+#define PINCTRL_MUXSEL7_BANK3_PIN30_MASK (0x3 << 28)
+#define PINCTRL_MUXSEL7_BANK3_PIN30_OFFSET 28
+#define PINCTRL_MUXSEL7_BANK3_PIN29_MASK (0x3 << 26)
+#define PINCTRL_MUXSEL7_BANK3_PIN29_OFFSET 26
+#define PINCTRL_MUXSEL7_BANK3_PIN28_MASK (0x3 << 24)
+#define PINCTRL_MUXSEL7_BANK3_PIN28_OFFSET 24
+#define PINCTRL_MUXSEL7_BANK3_PIN27_MASK (0x3 << 22)
+#define PINCTRL_MUXSEL7_BANK3_PIN27_OFFSET 22
+#define PINCTRL_MUXSEL7_BANK3_PIN26_MASK (0x3 << 20)
+#define PINCTRL_MUXSEL7_BANK3_PIN26_OFFSET 20
+#define PINCTRL_MUXSEL7_BANK3_PIN25_MASK (0x3 << 18)
+#define PINCTRL_MUXSEL7_BANK3_PIN25_OFFSET 18
+#define PINCTRL_MUXSEL7_BANK3_PIN24_MASK (0x3 << 16)
+#define PINCTRL_MUXSEL7_BANK3_PIN24_OFFSET 16
+#define PINCTRL_MUXSEL7_BANK3_PIN23_MASK (0x3 << 14)
+#define PINCTRL_MUXSEL7_BANK3_PIN23_OFFSET 14
+#define PINCTRL_MUXSEL7_BANK3_PIN22_MASK (0x3 << 12)
+#define PINCTRL_MUXSEL7_BANK3_PIN22_OFFSET 12
+#define PINCTRL_MUXSEL7_BANK3_PIN21_MASK (0x3 << 10)
+#define PINCTRL_MUXSEL7_BANK3_PIN21_OFFSET 10
+#define PINCTRL_MUXSEL7_BANK3_PIN20_MASK (0x3 << 8)
+#define PINCTRL_MUXSEL7_BANK3_PIN20_OFFSET 8
+#define PINCTRL_MUXSEL7_BANK3_PIN18_MASK (0x3 << 4)
+#define PINCTRL_MUXSEL7_BANK3_PIN18_OFFSET 4
+#define PINCTRL_MUXSEL7_BANK3_PIN17_MASK (0x3 << 2)
+#define PINCTRL_MUXSEL7_BANK3_PIN17_OFFSET 2
+#define PINCTRL_MUXSEL7_BANK3_PIN16_MASK (0x3 << 0)
+#define PINCTRL_MUXSEL7_BANK3_PIN16_OFFSET 0
+
+#define PINCTRL_MUXSEL8_BANK4_PIN15_MASK (0x3 << 30)
+#define PINCTRL_MUXSEL8_BANK4_PIN15_OFFSET 30
+#define PINCTRL_MUXSEL8_BANK4_PIN14_MASK (0x3 << 28)
+#define PINCTRL_MUXSEL8_BANK4_PIN14_OFFSET 28
+#define PINCTRL_MUXSEL8_BANK4_PIN13_MASK (0x3 << 26)
+#define PINCTRL_MUXSEL8_BANK4_PIN13_OFFSET 26
+#define PINCTRL_MUXSEL8_BANK4_PIN12_MASK (0x3 << 24)
+#define PINCTRL_MUXSEL8_BANK4_PIN12_OFFSET 24
+#define PINCTRL_MUXSEL8_BANK4_PIN11_MASK (0x3 << 22)
+#define PINCTRL_MUXSEL8_BANK4_PIN11_OFFSET 22
+#define PINCTRL_MUXSEL8_BANK4_PIN10_MASK (0x3 << 20)
+#define PINCTRL_MUXSEL8_BANK4_PIN10_OFFSET 20
+#define PINCTRL_MUXSEL8_BANK4_PIN09_MASK (0x3 << 18)
+#define PINCTRL_MUXSEL8_BANK4_PIN09_OFFSET 18
+#define PINCTRL_MUXSEL8_BANK4_PIN08_MASK (0x3 << 16)
+#define PINCTRL_MUXSEL8_BANK4_PIN08_OFFSET 16
+#define PINCTRL_MUXSEL8_BANK4_PIN07_MASK (0x3 << 14)
+#define PINCTRL_MUXSEL8_BANK4_PIN07_OFFSET 14
+#define PINCTRL_MUXSEL8_BANK4_PIN06_MASK (0x3 << 12)
+#define PINCTRL_MUXSEL8_BANK4_PIN06_OFFSET 12
+#define PINCTRL_MUXSEL8_BANK4_PIN05_MASK (0x3 << 10)
+#define PINCTRL_MUXSEL8_BANK4_PIN05_OFFSET 10
+#define PINCTRL_MUXSEL8_BANK4_PIN04_MASK (0x3 << 8)
+#define PINCTRL_MUXSEL8_BANK4_PIN04_OFFSET 8
+#define PINCTRL_MUXSEL8_BANK4_PIN03_MASK (0x3 << 6)
+#define PINCTRL_MUXSEL8_BANK4_PIN03_OFFSET 6
+#define PINCTRL_MUXSEL8_BANK4_PIN02_MASK (0x3 << 4)
+#define PINCTRL_MUXSEL8_BANK4_PIN02_OFFSET 4
+#define PINCTRL_MUXSEL8_BANK4_PIN01_MASK (0x3 << 2)
+#define PINCTRL_MUXSEL8_BANK4_PIN01_OFFSET 2
+#define PINCTRL_MUXSEL8_BANK4_PIN00_MASK (0x3 << 0)
+#define PINCTRL_MUXSEL8_BANK4_PIN00_OFFSET 0
+
+#define PINCTRL_MUXSEL9_BANK4_PIN20_MASK (0x3 << 8)
+#define PINCTRL_MUXSEL9_BANK4_PIN20_OFFSET 8
+#define PINCTRL_MUXSEL9_BANK4_PIN16_MASK (0x3 << 0)
+#define PINCTRL_MUXSEL9_BANK4_PIN16_OFFSET 0
+
+#define PINCTRL_MUXSEL10_BANK5_PIN15_MASK (0x3 << 30)
+#define PINCTRL_MUXSEL10_BANK5_PIN15_OFFSET 30
+#define PINCTRL_MUXSEL10_BANK5_PIN14_MASK (0x3 << 28)
+#define PINCTRL_MUXSEL10_BANK5_PIN14_OFFSET 28
+#define PINCTRL_MUXSEL10_BANK5_PIN13_MASK (0x3 << 26)
+#define PINCTRL_MUXSEL10_BANK5_PIN13_OFFSET 26
+#define PINCTRL_MUXSEL10_BANK5_PIN12_MASK (0x3 << 24)
+#define PINCTRL_MUXSEL10_BANK5_PIN12_OFFSET 24
+#define PINCTRL_MUXSEL10_BANK5_PIN11_MASK (0x3 << 22)
+#define PINCTRL_MUXSEL10_BANK5_PIN11_OFFSET 22
+#define PINCTRL_MUXSEL10_BANK5_PIN10_MASK (0x3 << 20)
+#define PINCTRL_MUXSEL10_BANK5_PIN10_OFFSET 20
+#define PINCTRL_MUXSEL10_BANK5_PIN09_MASK (0x3 << 18)
+#define PINCTRL_MUXSEL10_BANK5_PIN09_OFFSET 18
+#define PINCTRL_MUXSEL10_BANK5_PIN08_MASK (0x3 << 16)
+#define PINCTRL_MUXSEL10_BANK5_PIN08_OFFSET 16
+#define PINCTRL_MUXSEL10_BANK5_PIN07_MASK (0x3 << 14)
+#define PINCTRL_MUXSEL10_BANK5_PIN07_OFFSET 14
+#define PINCTRL_MUXSEL10_BANK5_PIN06_MASK (0x3 << 12)
+#define PINCTRL_MUXSEL10_BANK5_PIN06_OFFSET 12
+#define PINCTRL_MUXSEL10_BANK5_PIN05_MASK (0x3 << 10)
+#define PINCTRL_MUXSEL10_BANK5_PIN05_OFFSET 10
+#define PINCTRL_MUXSEL10_BANK5_PIN04_MASK (0x3 << 8)
+#define PINCTRL_MUXSEL10_BANK5_PIN04_OFFSET 8
+#define PINCTRL_MUXSEL10_BANK5_PIN03_MASK (0x3 << 6)
+#define PINCTRL_MUXSEL10_BANK5_PIN03_OFFSET 6
+#define PINCTRL_MUXSEL10_BANK5_PIN02_MASK (0x3 << 4)
+#define PINCTRL_MUXSEL10_BANK5_PIN02_OFFSET 4
+#define PINCTRL_MUXSEL10_BANK5_PIN01_MASK (0x3 << 2)
+#define PINCTRL_MUXSEL10_BANK5_PIN01_OFFSET 2
+#define PINCTRL_MUXSEL10_BANK5_PIN00_MASK (0x3 << 0)
+#define PINCTRL_MUXSEL10_BANK5_PIN00_OFFSET 0
+
+#define PINCTRL_MUXSEL11_BANK5_PIN26_MASK (0x3 << 20)
+#define PINCTRL_MUXSEL11_BANK5_PIN26_OFFSET 20
+#define PINCTRL_MUXSEL11_BANK5_PIN23_MASK (0x3 << 14)
+#define PINCTRL_MUXSEL11_BANK5_PIN23_OFFSET 14
+#define PINCTRL_MUXSEL11_BANK5_PIN22_MASK (0x3 << 12)
+#define PINCTRL_MUXSEL11_BANK5_PIN22_OFFSET 12
+#define PINCTRL_MUXSEL11_BANK5_PIN21_MASK (0x3 << 10)
+#define PINCTRL_MUXSEL11_BANK5_PIN21_OFFSET 10
+#define PINCTRL_MUXSEL11_BANK5_PIN20_MASK (0x3 << 8)
+#define PINCTRL_MUXSEL11_BANK5_PIN20_OFFSET 8
+#define PINCTRL_MUXSEL11_BANK5_PIN19_MASK (0x3 << 6)
+#define PINCTRL_MUXSEL11_BANK5_PIN19_OFFSET 6
+#define PINCTRL_MUXSEL11_BANK5_PIN18_MASK (0x3 << 4)
+#define PINCTRL_MUXSEL11_BANK5_PIN18_OFFSET 4
+#define PINCTRL_MUXSEL11_BANK5_PIN17_MASK (0x3 << 2)
+#define PINCTRL_MUXSEL11_BANK5_PIN17_OFFSET 2
+#define PINCTRL_MUXSEL11_BANK5_PIN16_MASK (0x3 << 0)
+#define PINCTRL_MUXSEL11_BANK5_PIN16_OFFSET 0
+
+#define PINCTRL_MUXSEL12_BANK6_PIN14_MASK (0x3 << 28)
+#define PINCTRL_MUXSEL12_BANK6_PIN14_OFFSET 28
+#define PINCTRL_MUXSEL12_BANK6_PIN13_MASK (0x3 << 26)
+#define PINCTRL_MUXSEL12_BANK6_PIN13_OFFSET 26
+#define PINCTRL_MUXSEL12_BANK6_PIN12_MASK (0x3 << 24)
+#define PINCTRL_MUXSEL12_BANK6_PIN12_OFFSET 24
+#define PINCTRL_MUXSEL12_BANK6_PIN11_MASK (0x3 << 22)
+#define PINCTRL_MUXSEL12_BANK6_PIN11_OFFSET 22
+#define PINCTRL_MUXSEL12_BANK6_PIN10_MASK (0x3 << 20)
+#define PINCTRL_MUXSEL12_BANK6_PIN10_OFFSET 20
+#define PINCTRL_MUXSEL12_BANK6_PIN09_MASK (0x3 << 18)
+#define PINCTRL_MUXSEL12_BANK6_PIN09_OFFSET 18
+#define PINCTRL_MUXSEL12_BANK6_PIN08_MASK (0x3 << 16)
+#define PINCTRL_MUXSEL12_BANK6_PIN08_OFFSET 16
+#define PINCTRL_MUXSEL12_BANK6_PIN07_MASK (0x3 << 14)
+#define PINCTRL_MUXSEL12_BANK6_PIN07_OFFSET 14
+#define PINCTRL_MUXSEL12_BANK6_PIN06_MASK (0x3 << 12)
+#define PINCTRL_MUXSEL12_BANK6_PIN06_OFFSET 12
+#define PINCTRL_MUXSEL12_BANK6_PIN05_MASK (0x3 << 10)
+#define PINCTRL_MUXSEL12_BANK6_PIN05_OFFSET 10
+#define PINCTRL_MUXSEL12_BANK6_PIN04_MASK (0x3 << 8)
+#define PINCTRL_MUXSEL12_BANK6_PIN04_OFFSET 8
+#define PINCTRL_MUXSEL12_BANK6_PIN03_MASK (0x3 << 6)
+#define PINCTRL_MUXSEL12_BANK6_PIN03_OFFSET 6
+#define PINCTRL_MUXSEL12_BANK6_PIN02_MASK (0x3 << 4)
+#define PINCTRL_MUXSEL12_BANK6_PIN02_OFFSET 4
+#define PINCTRL_MUXSEL12_BANK6_PIN01_MASK (0x3 << 2)
+#define PINCTRL_MUXSEL12_BANK6_PIN01_OFFSET 2
+#define PINCTRL_MUXSEL12_BANK6_PIN00_MASK (0x3 << 0)
+#define PINCTRL_MUXSEL12_BANK6_PIN00_OFFSET 0
+
+#define PINCTRL_MUXSEL13_BANK6_PIN24_MASK (0x3 << 16)
+#define PINCTRL_MUXSEL13_BANK6_PIN24_OFFSET 16
+#define PINCTRL_MUXSEL13_BANK6_PIN23_MASK (0x3 << 14)
+#define PINCTRL_MUXSEL13_BANK6_PIN23_OFFSET 14
+#define PINCTRL_MUXSEL13_BANK6_PIN22_MASK (0x3 << 12)
+#define PINCTRL_MUXSEL13_BANK6_PIN22_OFFSET 12
+#define PINCTRL_MUXSEL13_BANK6_PIN21_MASK (0x3 << 10)
+#define PINCTRL_MUXSEL13_BANK6_PIN21_OFFSET 10
+#define PINCTRL_MUXSEL13_BANK6_PIN20_MASK (0x3 << 8)
+#define PINCTRL_MUXSEL13_BANK6_PIN20_OFFSET 8
+#define PINCTRL_MUXSEL13_BANK6_PIN19_MASK (0x3 << 6)
+#define PINCTRL_MUXSEL13_BANK6_PIN19_OFFSET 6
+#define PINCTRL_MUXSEL13_BANK6_PIN18_MASK (0x3 << 4)
+#define PINCTRL_MUXSEL13_BANK6_PIN18_OFFSET 4
+#define PINCTRL_MUXSEL13_BANK6_PIN17_MASK (0x3 << 2)
+#define PINCTRL_MUXSEL13_BANK6_PIN17_OFFSET 2
+#define PINCTRL_MUXSEL13_BANK6_PIN16_MASK (0x3 << 0)
+#define PINCTRL_MUXSEL13_BANK6_PIN16_OFFSET 0
+
+#define PINCTRL_DRIVE0_BANK0_PIN07_V (1 << 30)
+#define PINCTRL_DRIVE0_BANK0_PIN07_MA_MASK (0x3 << 28)
+#define PINCTRL_DRIVE0_BANK0_PIN07_MA_OFFSET 28
+#define PINCTRL_DRIVE0_BANK0_PIN06_V (1 << 26)
+#define PINCTRL_DRIVE0_BANK0_PIN06_MA_MASK (0x3 << 24)
+#define PINCTRL_DRIVE0_BANK0_PIN06_MA_OFFSET 24
+#define PINCTRL_DRIVE0_BANK0_PIN05_V (1 << 22)
+#define PINCTRL_DRIVE0_BANK0_PIN05_MA_MASK (0x3 << 20)
+#define PINCTRL_DRIVE0_BANK0_PIN05_MA_OFFSET 20
+#define PINCTRL_DRIVE0_BANK0_PIN04_V (1 << 18)
+#define PINCTRL_DRIVE0_BANK0_PIN04_MA_MASK (0x3 << 16)
+#define PINCTRL_DRIVE0_BANK0_PIN04_MA_OFFSET 16
+#define PINCTRL_DRIVE0_BANK0_PIN03_V (1 << 14)
+#define PINCTRL_DRIVE0_BANK0_PIN03_MA_MASK (0x3 << 12)
+#define PINCTRL_DRIVE0_BANK0_PIN03_MA_OFFSET 12
+#define PINCTRL_DRIVE0_BANK0_PIN02_V (1 << 10)
+#define PINCTRL_DRIVE0_BANK0_PIN02_MA_MASK (0x3 << 8)
+#define PINCTRL_DRIVE0_BANK0_PIN02_MA_OFFSET 8
+#define PINCTRL_DRIVE0_BANK0_PIN01_V (1 << 6)
+#define PINCTRL_DRIVE0_BANK0_PIN01_MA_MASK (0x3 << 4)
+#define PINCTRL_DRIVE0_BANK0_PIN01_MA_OFFSET 4
+#define PINCTRL_DRIVE0_BANK0_PIN00_V (1 << 2)
+#define PINCTRL_DRIVE0_BANK0_PIN00_MA_MASK (0x3 << 0)
+#define PINCTRL_DRIVE0_BANK0_PIN00_MA_OFFSET 0
+
+#define PINCTRL_DRIVE2_BANK0_PIN23_V (1 << 30)
+#define PINCTRL_DRIVE2_BANK0_PIN23_MA_MASK (0x3 << 28)
+#define PINCTRL_DRIVE2_BANK0_PIN23_MA_OFFSET 28
+#define PINCTRL_DRIVE2_BANK0_PIN22_V (1 << 26)
+#define PINCTRL_DRIVE2_BANK0_PIN22_MA_MASK (0x3 << 24)
+#define PINCTRL_DRIVE2_BANK0_PIN22_MA_OFFSET 24
+#define PINCTRL_DRIVE2_BANK0_PIN21_V (1 << 22)
+#define PINCTRL_DRIVE2_BANK0_PIN21_MA_MASK (0x3 << 20)
+#define PINCTRL_DRIVE2_BANK0_PIN21_MA_OFFSET 20
+#define PINCTRL_DRIVE2_BANK0_PIN20_V (1 << 18)
+#define PINCTRL_DRIVE2_BANK0_PIN20_MA_MASK (0x3 << 16)
+#define PINCTRL_DRIVE2_BANK0_PIN20_MA_OFFSET 16
+#define PINCTRL_DRIVE2_BANK0_PIN19_V (1 << 14)
+#define PINCTRL_DRIVE2_BANK0_PIN19_MA_MASK (0x3 << 12)
+#define PINCTRL_DRIVE2_BANK0_PIN19_MA_OFFSET 12
+#define PINCTRL_DRIVE2_BANK0_PIN18_V (1 << 10)
+#define PINCTRL_DRIVE2_BANK0_PIN18_MA_MASK (0x3 << 8)
+#define PINCTRL_DRIVE2_BANK0_PIN18_MA_OFFSET 8
+#define PINCTRL_DRIVE2_BANK0_PIN17_V (1 << 6)
+#define PINCTRL_DRIVE2_BANK0_PIN17_MA_MASK (0x3 << 4)
+#define PINCTRL_DRIVE2_BANK0_PIN17_MA_OFFSET 4
+#define PINCTRL_DRIVE2_BANK0_PIN16_V (1 << 2)
+#define PINCTRL_DRIVE2_BANK0_PIN16_MA_MASK (0x3 << 0)
+#define PINCTRL_DRIVE2_BANK0_PIN16_MA_OFFSET 0
+
+#define PINCTRL_DRIVE3_BANK0_PIN28_V (1 << 18)
+#define PINCTRL_DRIVE3_BANK0_PIN28_MA_MASK (0x3 << 16)
+#define PINCTRL_DRIVE3_BANK0_PIN28_MA_OFFSET 16
+#define PINCTRL_DRIVE3_BANK0_PIN27_V (1 << 14)
+#define PINCTRL_DRIVE3_BANK0_PIN27_MA_MASK (0x3 << 12)
+#define PINCTRL_DRIVE3_BANK0_PIN27_MA_OFFSET 12
+#define PINCTRL_DRIVE3_BANK0_PIN26_V (1 << 10)
+#define PINCTRL_DRIVE3_BANK0_PIN26_MA_MASK (0x3 << 8)
+#define PINCTRL_DRIVE3_BANK0_PIN26_MA_OFFSET 8
+#define PINCTRL_DRIVE3_BANK0_PIN25_V (1 << 6)
+#define PINCTRL_DRIVE3_BANK0_PIN25_MA_MASK (0x3 << 4)
+#define PINCTRL_DRIVE3_BANK0_PIN25_MA_OFFSET 4
+#define PINCTRL_DRIVE3_BANK0_PIN24_V (1 << 2)
+#define PINCTRL_DRIVE3_BANK0_PIN24_MA_MASK (0x3 << 0)
+#define PINCTRL_DRIVE3_BANK0_PIN24_MA_OFFSET 0
+
+#define PINCTRL_DRIVE4_BANK1_PIN07_V (1 << 30)
+#define PINCTRL_DRIVE4_BANK1_PIN07_MA_MASK (0x3 << 28)
+#define PINCTRL_DRIVE4_BANK1_PIN07_MA_OFFSET 28
+#define PINCTRL_DRIVE4_BANK1_PIN06_V (1 << 26)
+#define PINCTRL_DRIVE4_BANK1_PIN06_MA_MASK (0x3 << 24)
+#define PINCTRL_DRIVE4_BANK1_PIN06_MA_OFFSET 24
+#define PINCTRL_DRIVE4_BANK1_PIN05_V (1 << 22)
+#define PINCTRL_DRIVE4_BANK1_PIN05_MA_MASK (0x3 << 20)
+#define PINCTRL_DRIVE4_BANK1_PIN05_MA_OFFSET 20
+#define PINCTRL_DRIVE4_BANK1_PIN04_V (1 << 18)
+#define PINCTRL_DRIVE4_BANK1_PIN04_MA_MASK (0x3 << 16)
+#define PINCTRL_DRIVE4_BANK1_PIN04_MA_OFFSET 16
+#define PINCTRL_DRIVE4_BANK1_PIN03_V (1 << 14)
+#define PINCTRL_DRIVE4_BANK1_PIN03_MA_MASK (0x3 << 12)
+#define PINCTRL_DRIVE4_BANK1_PIN03_MA_OFFSET 12
+#define PINCTRL_DRIVE4_BANK1_PIN02_V (1 << 10)
+#define PINCTRL_DRIVE4_BANK1_PIN02_MA_MASK (0x3 << 8)
+#define PINCTRL_DRIVE4_BANK1_PIN02_MA_OFFSET 8
+#define PINCTRL_DRIVE4_BANK1_PIN01_V (1 << 6)
+#define PINCTRL_DRIVE4_BANK1_PIN01_MA_MASK (0x3 << 4)
+#define PINCTRL_DRIVE4_BANK1_PIN01_MA_OFFSET 4
+#define PINCTRL_DRIVE4_BANK1_PIN00_V (1 << 2)
+#define PINCTRL_DRIVE4_BANK1_PIN00_MA_MASK (0x3 << 0)
+#define PINCTRL_DRIVE4_BANK1_PIN00_MA_OFFSET 0
+
+#define PINCTRL_DRIVE5_BANK1_PIN15_V (1 << 30)
+#define PINCTRL_DRIVE5_BANK1_PIN15_MA_MASK (0x3 << 28)
+#define PINCTRL_DRIVE5_BANK1_PIN15_MA_OFFSET 28
+#define PINCTRL_DRIVE5_BANK1_PIN14_V (1 << 26)
+#define PINCTRL_DRIVE5_BANK1_PIN14_MA_MASK (0x3 << 24)
+#define PINCTRL_DRIVE5_BANK1_PIN14_MA_OFFSET 24
+#define PINCTRL_DRIVE5_BANK1_PIN13_V (1 << 22)
+#define PINCTRL_DRIVE5_BANK1_PIN13_MA_MASK (0x3 << 20)
+#define PINCTRL_DRIVE5_BANK1_PIN13_MA_OFFSET 20
+#define PINCTRL_DRIVE5_BANK1_PIN12_V (1 << 18)
+#define PINCTRL_DRIVE5_BANK1_PIN12_MA_MASK (0x3 << 16)
+#define PINCTRL_DRIVE5_BANK1_PIN12_MA_OFFSET 16
+#define PINCTRL_DRIVE5_BANK1_PIN11_V (1 << 14)
+#define PINCTRL_DRIVE5_BANK1_PIN11_MA_MASK (0x3 << 12)
+#define PINCTRL_DRIVE5_BANK1_PIN11_MA_OFFSET 12
+#define PINCTRL_DRIVE5_BANK1_PIN10_V (1 << 10)
+#define PINCTRL_DRIVE5_BANK1_PIN10_MA_MASK (0x3 << 8)
+#define PINCTRL_DRIVE5_BANK1_PIN10_MA_OFFSET 8
+#define PINCTRL_DRIVE5_BANK1_PIN09_V (1 << 6)
+#define PINCTRL_DRIVE5_BANK1_PIN09_MA_MASK (0x3 << 4)
+#define PINCTRL_DRIVE5_BANK1_PIN09_MA_OFFSET 4
+#define PINCTRL_DRIVE5_BANK1_PIN08_V (1 << 2)
+#define PINCTRL_DRIVE5_BANK1_PIN08_MA_MASK (0x3 << 0)
+#define PINCTRL_DRIVE5_BANK1_PIN08_MA_OFFSET 0
+
+#define PINCTRL_DRIVE6_BANK1_PIN23_V (1 << 30)
+#define PINCTRL_DRIVE6_BANK1_PIN23_MA_MASK (0x3 << 28)
+#define PINCTRL_DRIVE6_BANK1_PIN23_MA_OFFSET 28
+#define PINCTRL_DRIVE6_BANK1_PIN22_V (1 << 26)
+#define PINCTRL_DRIVE6_BANK1_PIN22_MA_MASK (0x3 << 24)
+#define PINCTRL_DRIVE6_BANK1_PIN22_MA_OFFSET 24
+#define PINCTRL_DRIVE6_BANK1_PIN21_V (1 << 22)
+#define PINCTRL_DRIVE6_BANK1_PIN21_MA_MASK (0x3 << 20)
+#define PINCTRL_DRIVE6_BANK1_PIN21_MA_OFFSET 20
+#define PINCTRL_DRIVE6_BANK1_PIN20_V (1 << 18)
+#define PINCTRL_DRIVE6_BANK1_PIN20_MA_MASK (0x3 << 16)
+#define PINCTRL_DRIVE6_BANK1_PIN20_MA_OFFSET 16
+#define PINCTRL_DRIVE6_BANK1_PIN19_V (1 << 14)
+#define PINCTRL_DRIVE6_BANK1_PIN19_MA_MASK (0x3 << 12)
+#define PINCTRL_DRIVE6_BANK1_PIN19_MA_OFFSET 12
+#define PINCTRL_DRIVE6_BANK1_PIN18_V (1 << 10)
+#define PINCTRL_DRIVE6_BANK1_PIN18_MA_MASK (0x3 << 8)
+#define PINCTRL_DRIVE6_BANK1_PIN18_MA_OFFSET 8
+#define PINCTRL_DRIVE6_BANK1_PIN17_V (1 << 6)
+#define PINCTRL_DRIVE6_BANK1_PIN17_MA_MASK (0x3 << 4)
+#define PINCTRL_DRIVE6_BANK1_PIN17_MA_OFFSET 4
+#define PINCTRL_DRIVE6_BANK1_PIN16_V (1 << 2)
+#define PINCTRL_DRIVE6_BANK1_PIN16_MA_MASK (0x3 << 0)
+#define PINCTRL_DRIVE6_BANK1_PIN16_MA_OFFSET 0
+
+#define PINCTRL_DRIVE7_BANK1_PIN31_V (1 << 30)
+#define PINCTRL_DRIVE7_BANK1_PIN31_MA_MASK (0x3 << 28)
+#define PINCTRL_DRIVE7_BANK1_PIN31_MA_OFFSET 28
+#define PINCTRL_DRIVE7_BANK1_PIN30_V (1 << 26)
+#define PINCTRL_DRIVE7_BANK1_PIN30_MA_MASK (0x3 << 24)
+#define PINCTRL_DRIVE7_BANK1_PIN30_MA_OFFSET 24
+#define PINCTRL_DRIVE7_BANK1_PIN29_V (1 << 22)
+#define PINCTRL_DRIVE7_BANK1_PIN29_MA_MASK (0x3 << 20)
+#define PINCTRL_DRIVE7_BANK1_PIN29_MA_OFFSET 20
+#define PINCTRL_DRIVE7_BANK1_PIN28_V (1 << 18)
+#define PINCTRL_DRIVE7_BANK1_PIN28_MA_MASK (0x3 << 16)
+#define PINCTRL_DRIVE7_BANK1_PIN28_MA_OFFSET 16
+#define PINCTRL_DRIVE7_BANK1_PIN27_V (1 << 14)
+#define PINCTRL_DRIVE7_BANK1_PIN27_MA_MASK (0x3 << 12)
+#define PINCTRL_DRIVE7_BANK1_PIN27_MA_OFFSET 12
+#define PINCTRL_DRIVE7_BANK1_PIN26_V (1 << 10)
+#define PINCTRL_DRIVE7_BANK1_PIN26_MA_MASK (0x3 << 8)
+#define PINCTRL_DRIVE7_BANK1_PIN26_MA_OFFSET 8
+#define PINCTRL_DRIVE7_BANK1_PIN25_V (1 << 6)
+#define PINCTRL_DRIVE7_BANK1_PIN25_MA_MASK (0x3 << 4)
+#define PINCTRL_DRIVE7_BANK1_PIN25_MA_OFFSET 4
+#define PINCTRL_DRIVE7_BANK1_PIN24_V (1 << 2)
+#define PINCTRL_DRIVE7_BANK1_PIN24_MA_MASK (0x3 << 0)
+#define PINCTRL_DRIVE7_BANK1_PIN24_MA_OFFSET 0
+
+#define PINCTRL_DRIVE8_BANK2_PIN07_V (1 << 30)
+#define PINCTRL_DRIVE8_BANK2_PIN07_MA_MASK (0x3 << 28)
+#define PINCTRL_DRIVE8_BANK2_PIN07_MA_OFFSET 28
+#define PINCTRL_DRIVE8_BANK2_PIN06_V (1 << 26)
+#define PINCTRL_DRIVE8_BANK2_PIN06_MA_MASK (0x3 << 24)
+#define PINCTRL_DRIVE8_BANK2_PIN06_MA_OFFSET 24
+#define PINCTRL_DRIVE8_BANK2_PIN05_V (1 << 22)
+#define PINCTRL_DRIVE8_BANK2_PIN05_MA_MASK (0x3 << 20)
+#define PINCTRL_DRIVE8_BANK2_PIN05_MA_OFFSET 20
+#define PINCTRL_DRIVE8_BANK2_PIN04_V (1 << 18)
+#define PINCTRL_DRIVE8_BANK2_PIN04_MA_MASK (0x3 << 16)
+#define PINCTRL_DRIVE8_BANK2_PIN04_MA_OFFSET 16
+#define PINCTRL_DRIVE8_BANK2_PIN03_V (1 << 14)
+#define PINCTRL_DRIVE8_BANK2_PIN03_MA_MASK (0x3 << 12)
+#define PINCTRL_DRIVE8_BANK2_PIN03_MA_OFFSET 12
+#define PINCTRL_DRIVE8_BANK2_PIN02_V (1 << 10)
+#define PINCTRL_DRIVE8_BANK2_PIN02_MA_MASK (0x3 << 8)
+#define PINCTRL_DRIVE8_BANK2_PIN02_MA_OFFSET 8
+#define PINCTRL_DRIVE8_BANK2_PIN01_V (1 << 6)
+#define PINCTRL_DRIVE8_BANK2_PIN01_MA_MASK (0x3 << 4)
+#define PINCTRL_DRIVE8_BANK2_PIN01_MA_OFFSET 4
+#define PINCTRL_DRIVE8_BANK2_PIN00_V (1 << 2)
+#define PINCTRL_DRIVE8_BANK2_PIN00_MA_MASK (0x3 << 0)
+#define PINCTRL_DRIVE8_BANK2_PIN00_MA_OFFSET 0
+
+#define PINCTRL_DRIVE9_BANK2_PIN15_V (1 << 30)
+#define PINCTRL_DRIVE9_BANK2_PIN15_MA_MASK (0x3 << 28)
+#define PINCTRL_DRIVE9_BANK2_PIN15_MA_OFFSET 28
+#define PINCTRL_DRIVE9_BANK2_PIN14_V (1 << 26)
+#define PINCTRL_DRIVE9_BANK2_PIN14_MA_MASK (0x3 << 24)
+#define PINCTRL_DRIVE9_BANK2_PIN14_MA_OFFSET 24
+#define PINCTRL_DRIVE9_BANK2_PIN13_V (1 << 22)
+#define PINCTRL_DRIVE9_BANK2_PIN13_MA_MASK (0x3 << 20)
+#define PINCTRL_DRIVE9_BANK2_PIN13_MA_OFFSET 20
+#define PINCTRL_DRIVE9_BANK2_PIN12_V (1 << 18)
+#define PINCTRL_DRIVE9_BANK2_PIN12_MA_MASK (0x3 << 16)
+#define PINCTRL_DRIVE9_BANK2_PIN12_MA_OFFSET 16
+#define PINCTRL_DRIVE9_BANK2_PIN10_V (1 << 10)
+#define PINCTRL_DRIVE9_BANK2_PIN10_MA_MASK (0x3 << 8)
+#define PINCTRL_DRIVE9_BANK2_PIN10_MA_OFFSET 8
+#define PINCTRL_DRIVE9_BANK2_PIN09_V (1 << 6)
+#define PINCTRL_DRIVE9_BANK2_PIN09_MA_MASK (0x3 << 4)
+#define PINCTRL_DRIVE9_BANK2_PIN09_MA_OFFSET 4
+#define PINCTRL_DRIVE9_BANK2_PIN08_V (1 << 2)
+#define PINCTRL_DRIVE9_BANK2_PIN08_MA_MASK (0x3 << 0)
+#define PINCTRL_DRIVE9_BANK2_PIN08_MA_OFFSET 0
+
+#define PINCTRL_DRIVE10_BANK2_PIN21_V (1 << 22)
+#define PINCTRL_DRIVE10_BANK2_PIN21_MA_MASK (0x3 << 20)
+#define PINCTRL_DRIVE10_BANK2_PIN21_MA_OFFSET 20
+#define PINCTRL_DRIVE10_BANK2_PIN20_V (1 << 18)
+#define PINCTRL_DRIVE10_BANK2_PIN20_MA_MASK (0x3 << 16)
+#define PINCTRL_DRIVE10_BANK2_PIN20_MA_OFFSET 16
+#define PINCTRL_DRIVE10_BANK2_PIN19_V (1 << 14)
+#define PINCTRL_DRIVE10_BANK2_PIN19_MA_MASK (0x3 << 12)
+#define PINCTRL_DRIVE10_BANK2_PIN19_MA_OFFSET 12
+#define PINCTRL_DRIVE10_BANK2_PIN18_V (1 << 10)
+#define PINCTRL_DRIVE10_BANK2_PIN18_MA_MASK (0x3 << 8)
+#define PINCTRL_DRIVE10_BANK2_PIN18_MA_OFFSET 8
+#define PINCTRL_DRIVE10_BANK2_PIN17_V (1 << 6)
+#define PINCTRL_DRIVE10_BANK2_PIN17_MA_MASK (0x3 << 4)
+#define PINCTRL_DRIVE10_BANK2_PIN17_MA_OFFSET 4
+#define PINCTRL_DRIVE10_BANK2_PIN16_V (1 << 2)
+#define PINCTRL_DRIVE10_BANK2_PIN16_MA_MASK (0x3 << 0)
+#define PINCTRL_DRIVE10_BANK2_PIN16_MA_OFFSET 0
+
+#define PINCTRL_DRIVE11_BANK2_PIN27_V (1 << 14)
+#define PINCTRL_DRIVE11_BANK2_PIN27_MA_MASK (0x3 << 12)
+#define PINCTRL_DRIVE11_BANK2_PIN27_MA_OFFSET 12
+#define PINCTRL_DRIVE11_BANK2_PIN26_V (1 << 10)
+#define PINCTRL_DRIVE11_BANK2_PIN26_MA_MASK (0x3 << 8)
+#define PINCTRL_DRIVE11_BANK2_PIN26_MA_OFFSET 8
+#define PINCTRL_DRIVE11_BANK2_PIN25_V (1 << 6)
+#define PINCTRL_DRIVE11_BANK2_PIN25_MA_MASK (0x3 << 4)
+#define PINCTRL_DRIVE11_BANK2_PIN25_MA_OFFSET 4
+#define PINCTRL_DRIVE11_BANK2_PIN24_V (1 << 2)
+#define PINCTRL_DRIVE11_BANK2_PIN24_MA_MASK (0x3 << 0)
+#define PINCTRL_DRIVE11_BANK2_PIN24_MA_OFFSET 0
+
+#define PINCTRL_DRIVE12_BANK3_PIN07_V (1 << 30)
+#define PINCTRL_DRIVE12_BANK3_PIN07_MA_MASK (0x3 << 28)
+#define PINCTRL_DRIVE12_BANK3_PIN07_MA_OFFSET 28
+#define PINCTRL_DRIVE12_BANK3_PIN06_V (1 << 26)
+#define PINCTRL_DRIVE12_BANK3_PIN06_MA_MASK (0x3 << 24)
+#define PINCTRL_DRIVE12_BANK3_PIN06_MA_OFFSET 24
+#define PINCTRL_DRIVE12_BANK3_PIN05_V (1 << 22)
+#define PINCTRL_DRIVE12_BANK3_PIN05_MA_MASK (0x3 << 20)
+#define PINCTRL_DRIVE12_BANK3_PIN05_MA_OFFSET 20
+#define PINCTRL_DRIVE12_BANK3_PIN04_V (1 << 18)
+#define PINCTRL_DRIVE12_BANK3_PIN04_MA_MASK (0x3 << 16)
+#define PINCTRL_DRIVE12_BANK3_PIN04_MA_OFFSET 16
+#define PINCTRL_DRIVE12_BANK3_PIN03_V (1 << 14)
+#define PINCTRL_DRIVE12_BANK3_PIN03_MA_MASK (0x3 << 12)
+#define PINCTRL_DRIVE12_BANK3_PIN03_MA_OFFSET 12
+#define PINCTRL_DRIVE12_BANK3_PIN02_V (1 << 10)
+#define PINCTRL_DRIVE12_BANK3_PIN02_MA_MASK (0x3 << 8)
+#define PINCTRL_DRIVE12_BANK3_PIN02_MA_OFFSET 8
+#define PINCTRL_DRIVE12_BANK3_PIN01_V (1 << 6)
+#define PINCTRL_DRIVE12_BANK3_PIN01_MA_MASK (0x3 << 4)
+#define PINCTRL_DRIVE12_BANK3_PIN01_MA_OFFSET 4
+#define PINCTRL_DRIVE12_BANK3_PIN00_V (1 << 2)
+#define PINCTRL_DRIVE12_BANK3_PIN00_MA_MASK (0x3 << 0)
+#define PINCTRL_DRIVE12_BANK3_PIN00_MA_OFFSET 0
+
+#define PINCTRL_DRIVE13_BANK3_PIN15_V (1 << 30)
+#define PINCTRL_DRIVE13_BANK3_PIN15_MA_MASK (0x3 << 28)
+#define PINCTRL_DRIVE13_BANK3_PIN15_MA_OFFSET 28
+#define PINCTRL_DRIVE13_BANK3_PIN14_V (1 << 26)
+#define PINCTRL_DRIVE13_BANK3_PIN14_MA_MASK (0x3 << 24)
+#define PINCTRL_DRIVE13_BANK3_PIN14_MA_OFFSET 24
+#define PINCTRL_DRIVE13_BANK3_PIN13_V (1 << 22)
+#define PINCTRL_DRIVE13_BANK3_PIN13_MA_MASK (0x3 << 20)
+#define PINCTRL_DRIVE13_BANK3_PIN13_MA_OFFSET 20
+#define PINCTRL_DRIVE13_BANK3_PIN12_V (1 << 18)
+#define PINCTRL_DRIVE13_BANK3_PIN12_MA_MASK (0x3 << 16)
+#define PINCTRL_DRIVE13_BANK3_PIN12_MA_OFFSET 16
+#define PINCTRL_DRIVE13_BANK3_PIN11_V (1 << 14)
+#define PINCTRL_DRIVE13_BANK3_PIN11_MA_MASK (0x3 << 12)
+#define PINCTRL_DRIVE13_BANK3_PIN11_MA_OFFSET 12
+#define PINCTRL_DRIVE13_BANK3_PIN10_V (1 << 10)
+#define PINCTRL_DRIVE13_BANK3_PIN10_MA_MASK (0x3 << 8)
+#define PINCTRL_DRIVE13_BANK3_PIN10_MA_OFFSET 8
+#define PINCTRL_DRIVE13_BANK3_PIN09_V (1 << 6)
+#define PINCTRL_DRIVE13_BANK3_PIN09_MA_MASK (0x3 << 4)
+#define PINCTRL_DRIVE13_BANK3_PIN09_MA_OFFSET 4
+#define PINCTRL_DRIVE13_BANK3_PIN08_V (1 << 2)
+#define PINCTRL_DRIVE13_BANK3_PIN08_MA_MASK (0x3 << 0)
+#define PINCTRL_DRIVE13_BANK3_PIN08_MA_OFFSET 0
+
+#define PINCTRL_DRIVE14_BANK3_PIN23_V (1 << 30)
+#define PINCTRL_DRIVE14_BANK3_PIN23_MA_MASK (0x3 << 28)
+#define PINCTRL_DRIVE14_BANK3_PIN23_MA_OFFSET 28
+#define PINCTRL_DRIVE14_BANK3_PIN22_V (1 << 26)
+#define PINCTRL_DRIVE14_BANK3_PIN22_MA_MASK (0x3 << 24)
+#define PINCTRL_DRIVE14_BANK3_PIN22_MA_OFFSET 24
+#define PINCTRL_DRIVE14_BANK3_PIN21_V (1 << 22)
+#define PINCTRL_DRIVE14_BANK3_PIN21_MA_MASK (0x3 << 20)
+#define PINCTRL_DRIVE14_BANK3_PIN21_MA_OFFSET 20
+#define PINCTRL_DRIVE14_BANK3_PIN20_V (1 << 18)
+#define PINCTRL_DRIVE14_BANK3_PIN20_MA_MASK (0x3 << 16)
+#define PINCTRL_DRIVE14_BANK3_PIN20_MA_OFFSET 16
+#define PINCTRL_DRIVE14_BANK3_PIN18_V (1 << 10)
+#define PINCTRL_DRIVE14_BANK3_PIN18_MA_MASK (0x3 << 8)
+#define PINCTRL_DRIVE14_BANK3_PIN18_MA_OFFSET 8
+#define PINCTRL_DRIVE14_BANK3_PIN17_V (1 << 6)
+#define PINCTRL_DRIVE14_BANK3_PIN17_MA_MASK (0x3 << 4)
+#define PINCTRL_DRIVE14_BANK3_PIN17_MA_OFFSET 4
+#define PINCTRL_DRIVE14_BANK3_PIN16_V (1 << 2)
+#define PINCTRL_DRIVE14_BANK3_PIN16_MA_MASK (0x3 << 0)
+#define PINCTRL_DRIVE14_BANK3_PIN16_MA_OFFSET 0
+
+#define PINCTRL_DRIVE15_BANK3_PIN30_V (1 << 26)
+#define PINCTRL_DRIVE15_BANK3_PIN30_MA_MASK (0x3 << 24)
+#define PINCTRL_DRIVE15_BANK3_PIN30_MA_OFFSET 24
+#define PINCTRL_DRIVE15_BANK3_PIN29_V (1 << 22)
+#define PINCTRL_DRIVE15_BANK3_PIN29_MA_MASK (0x3 << 20)
+#define PINCTRL_DRIVE15_BANK3_PIN29_MA_OFFSET 20
+#define PINCTRL_DRIVE15_BANK3_PIN28_V (1 << 18)
+#define PINCTRL_DRIVE15_BANK3_PIN28_MA_MASK (0x3 << 16)
+#define PINCTRL_DRIVE15_BANK3_PIN28_MA_OFFSET 16
+#define PINCTRL_DRIVE15_BANK3_PIN27_V (1 << 14)
+#define PINCTRL_DRIVE15_BANK3_PIN27_MA_MASK (0x3 << 12)
+#define PINCTRL_DRIVE15_BANK3_PIN27_MA_OFFSET 12
+#define PINCTRL_DRIVE15_BANK3_PIN26_V (1 << 10)
+#define PINCTRL_DRIVE15_BANK3_PIN26_MA_MASK (0x3 << 8)
+#define PINCTRL_DRIVE15_BANK3_PIN26_MA_OFFSET 8
+#define PINCTRL_DRIVE15_BANK3_PIN25_V (1 << 6)
+#define PINCTRL_DRIVE15_BANK3_PIN25_MA_MASK (0x3 << 4)
+#define PINCTRL_DRIVE15_BANK3_PIN25_MA_OFFSET 4
+#define PINCTRL_DRIVE15_BANK3_PIN24_V (1 << 2)
+#define PINCTRL_DRIVE15_BANK3_PIN24_MA_MASK (0x3 << 0)
+#define PINCTRL_DRIVE15_BANK3_PIN24_MA_OFFSET 0
+
+#define PINCTRL_DRIVE16_BANK4_PIN07_V (1 << 30)
+#define PINCTRL_DRIVE16_BANK4_PIN07_MA_MASK (0x3 << 28)
+#define PINCTRL_DRIVE16_BANK4_PIN07_MA_OFFSET 28
+#define PINCTRL_DRIVE16_BANK4_PIN06_V (1 << 26)
+#define PINCTRL_DRIVE16_BANK4_PIN06_MA_MASK (0x3 << 24)
+#define PINCTRL_DRIVE16_BANK4_PIN06_MA_OFFSET 24
+#define PINCTRL_DRIVE16_BANK4_PIN05_V (1 << 22)
+#define PINCTRL_DRIVE16_BANK4_PIN05_MA_MASK (0x3 << 20)
+#define PINCTRL_DRIVE16_BANK4_PIN05_MA_OFFSET 20
+#define PINCTRL_DRIVE16_BANK4_PIN04_V (1 << 18)
+#define PINCTRL_DRIVE16_BANK4_PIN04_MA_MASK (0x3 << 16)
+#define PINCTRL_DRIVE16_BANK4_PIN04_MA_OFFSET 16
+#define PINCTRL_DRIVE16_BANK4_PIN03_V (1 << 14)
+#define PINCTRL_DRIVE16_BANK4_PIN03_MA_MASK (0x3 << 12)
+#define PINCTRL_DRIVE16_BANK4_PIN03_MA_OFFSET 12
+#define PINCTRL_DRIVE16_BANK4_PIN02_V (1 << 10)
+#define PINCTRL_DRIVE16_BANK4_PIN02_MA_MASK (0x3 << 8)
+#define PINCTRL_DRIVE16_BANK4_PIN02_MA_OFFSET 8
+#define PINCTRL_DRIVE16_BANK4_PIN01_V (1 << 6)
+#define PINCTRL_DRIVE16_BANK4_PIN01_MA_MASK (0x3 << 4)
+#define PINCTRL_DRIVE16_BANK4_PIN01_MA_OFFSET 4
+#define PINCTRL_DRIVE16_BANK4_PIN00_V (1 << 2)
+#define PINCTRL_DRIVE16_BANK4_PIN00_MA_MASK (0x3 << 0)
+#define PINCTRL_DRIVE16_BANK4_PIN00_MA_OFFSET 0
+
+#define PINCTRL_DRIVE17_BANK4_PIN15_V (1 << 30)
+#define PINCTRL_DRIVE17_BANK4_PIN15_MA_MASK (0x3 << 28)
+#define PINCTRL_DRIVE17_BANK4_PIN15_MA_OFFSET 28
+#define PINCTRL_DRIVE17_BANK4_PIN14_V (1 << 26)
+#define PINCTRL_DRIVE17_BANK4_PIN14_MA_MASK (0x3 << 24)
+#define PINCTRL_DRIVE17_BANK4_PIN14_MA_OFFSET 24
+#define PINCTRL_DRIVE17_BANK4_PIN13_V (1 << 22)
+#define PINCTRL_DRIVE17_BANK4_PIN13_MA_MASK (0x3 << 20)
+#define PINCTRL_DRIVE17_BANK4_PIN13_MA_OFFSET 20
+#define PINCTRL_DRIVE17_BANK4_PIN12_V (1 << 18)
+#define PINCTRL_DRIVE17_BANK4_PIN12_MA_MASK (0x3 << 16)
+#define PINCTRL_DRIVE17_BANK4_PIN12_MA_OFFSET 16
+#define PINCTRL_DRIVE17_BANK4_PIN11_V (1 << 14)
+#define PINCTRL_DRIVE17_BANK4_PIN11_MA_MASK (0x3 << 12)
+#define PINCTRL_DRIVE17_BANK4_PIN11_MA_OFFSET 12
+#define PINCTRL_DRIVE17_BANK4_PIN10_V (1 << 10)
+#define PINCTRL_DRIVE17_BANK4_PIN10_MA_MASK (0x3 << 8)
+#define PINCTRL_DRIVE17_BANK4_PIN10_MA_OFFSET 8
+#define PINCTRL_DRIVE17_BANK4_PIN09_V (1 << 6)
+#define PINCTRL_DRIVE17_BANK4_PIN09_MA_MASK (0x3 << 4)
+#define PINCTRL_DRIVE17_BANK4_PIN09_MA_OFFSET 4
+#define PINCTRL_DRIVE17_BANK4_PIN08_V (1 << 2)
+#define PINCTRL_DRIVE17_BANK4_PIN08_MA_MASK (0x3 << 0)
+#define PINCTRL_DRIVE17_BANK4_PIN08_MA_OFFSET 0
+
+#define PINCTRL_DRIVE18_BANK4_PIN20_V (1 << 18)
+#define PINCTRL_DRIVE18_BANK4_PIN20_MA_MASK (0x3 << 16)
+#define PINCTRL_DRIVE18_BANK4_PIN20_MA_OFFSET 16
+#define PINCTRL_DRIVE18_BANK4_PIN16_V (1 << 2)
+#define PINCTRL_DRIVE18_BANK4_PIN16_MA_MASK (0x3 << 0)
+#define PINCTRL_DRIVE18_BANK4_PIN16_MA_OFFSET 0
+
+#define PINCTRL_PULL0_BANK0_PIN28 (1 << 28)
+#define PINCTRL_PULL0_BANK0_PIN27 (1 << 27)
+#define PINCTRL_PULL0_BANK0_PIN26 (1 << 26)
+#define PINCTRL_PULL0_BANK0_PIN25 (1 << 25)
+#define PINCTRL_PULL0_BANK0_PIN24 (1 << 24)
+#define PINCTRL_PULL0_BANK0_PIN23 (1 << 23)
+#define PINCTRL_PULL0_BANK0_PIN22 (1 << 22)
+#define PINCTRL_PULL0_BANK0_PIN21 (1 << 21)
+#define PINCTRL_PULL0_BANK0_PIN20 (1 << 20)
+#define PINCTRL_PULL0_BANK0_PIN19 (1 << 19)
+#define PINCTRL_PULL0_BANK0_PIN18 (1 << 18)
+#define PINCTRL_PULL0_BANK0_PIN17 (1 << 17)
+#define PINCTRL_PULL0_BANK0_PIN16 (1 << 16)
+#define PINCTRL_PULL0_BANK0_PIN07 (1 << 7)
+#define PINCTRL_PULL0_BANK0_PIN06 (1 << 6)
+#define PINCTRL_PULL0_BANK0_PIN05 (1 << 5)
+#define PINCTRL_PULL0_BANK0_PIN04 (1 << 4)
+#define PINCTRL_PULL0_BANK0_PIN03 (1 << 3)
+#define PINCTRL_PULL0_BANK0_PIN02 (1 << 2)
+#define PINCTRL_PULL0_BANK0_PIN01 (1 << 1)
+#define PINCTRL_PULL0_BANK0_PIN00 (1 << 0)
+
+#define PINCTRL_PULL1_BANK1_PIN31 (1 << 31)
+#define PINCTRL_PULL1_BANK1_PIN30 (1 << 30)
+#define PINCTRL_PULL1_BANK1_PIN29 (1 << 29)
+#define PINCTRL_PULL1_BANK1_PIN28 (1 << 28)
+#define PINCTRL_PULL1_BANK1_PIN27 (1 << 27)
+#define PINCTRL_PULL1_BANK1_PIN26 (1 << 26)
+#define PINCTRL_PULL1_BANK1_PIN25 (1 << 25)
+#define PINCTRL_PULL1_BANK1_PIN24 (1 << 24)
+#define PINCTRL_PULL1_BANK1_PIN23 (1 << 23)
+#define PINCTRL_PULL1_BANK1_PIN22 (1 << 22)
+#define PINCTRL_PULL1_BANK1_PIN21 (1 << 21)
+#define PINCTRL_PULL1_BANK1_PIN20 (1 << 20)
+#define PINCTRL_PULL1_BANK1_PIN19 (1 << 19)
+#define PINCTRL_PULL1_BANK1_PIN18 (1 << 18)
+#define PINCTRL_PULL1_BANK1_PIN17 (1 << 17)
+#define PINCTRL_PULL1_BANK1_PIN16 (1 << 16)
+#define PINCTRL_PULL1_BANK1_PIN15 (1 << 15)
+#define PINCTRL_PULL1_BANK1_PIN14 (1 << 14)
+#define PINCTRL_PULL1_BANK1_PIN13 (1 << 13)
+#define PINCTRL_PULL1_BANK1_PIN12 (1 << 12)
+#define PINCTRL_PULL1_BANK1_PIN11 (1 << 11)
+#define PINCTRL_PULL1_BANK1_PIN10 (1 << 10)
+#define PINCTRL_PULL1_BANK1_PIN09 (1 << 9)
+#define PINCTRL_PULL1_BANK1_PIN08 (1 << 8)
+#define PINCTRL_PULL1_BANK1_PIN07 (1 << 7)
+#define PINCTRL_PULL1_BANK1_PIN06 (1 << 6)
+#define PINCTRL_PULL1_BANK1_PIN05 (1 << 5)
+#define PINCTRL_PULL1_BANK1_PIN04 (1 << 4)
+#define PINCTRL_PULL1_BANK1_PIN03 (1 << 3)
+#define PINCTRL_PULL1_BANK1_PIN02 (1 << 2)
+#define PINCTRL_PULL1_BANK1_PIN01 (1 << 1)
+#define PINCTRL_PULL1_BANK1_PIN00 (1 << 0)
+
+#define PINCTRL_PULL2_BANK2_PIN27 (1 << 27)
+#define PINCTRL_PULL2_BANK2_PIN26 (1 << 26)
+#define PINCTRL_PULL2_BANK2_PIN25 (1 << 25)
+#define PINCTRL_PULL2_BANK2_PIN24 (1 << 24)
+#define PINCTRL_PULL2_BANK2_PIN21 (1 << 21)
+#define PINCTRL_PULL2_BANK2_PIN20 (1 << 20)
+#define PINCTRL_PULL2_BANK2_PIN19 (1 << 19)
+#define PINCTRL_PULL2_BANK2_PIN18 (1 << 18)
+#define PINCTRL_PULL2_BANK2_PIN17 (1 << 17)
+#define PINCTRL_PULL2_BANK2_PIN16 (1 << 16)
+#define PINCTRL_PULL2_BANK2_PIN15 (1 << 15)
+#define PINCTRL_PULL2_BANK2_PIN14 (1 << 14)
+#define PINCTRL_PULL2_BANK2_PIN13 (1 << 13)
+#define PINCTRL_PULL2_BANK2_PIN12 (1 << 12)
+#define PINCTRL_PULL2_BANK2_PIN10 (1 << 10)
+#define PINCTRL_PULL2_BANK2_PIN09 (1 << 9)
+#define PINCTRL_PULL2_BANK2_PIN08 (1 << 8)
+#define PINCTRL_PULL2_BANK2_PIN07 (1 << 7)
+#define PINCTRL_PULL2_BANK2_PIN06 (1 << 6)
+#define PINCTRL_PULL2_BANK2_PIN05 (1 << 5)
+#define PINCTRL_PULL2_BANK2_PIN04 (1 << 4)
+#define PINCTRL_PULL2_BANK2_PIN03 (1 << 3)
+#define PINCTRL_PULL2_BANK2_PIN02 (1 << 2)
+#define PINCTRL_PULL2_BANK2_PIN01 (1 << 1)
+#define PINCTRL_PULL2_BANK2_PIN00 (1 << 0)
+
+#define PINCTRL_PULL3_BANK3_PIN30 (1 << 30)
+#define PINCTRL_PULL3_BANK3_PIN29 (1 << 29)
+#define PINCTRL_PULL3_BANK3_PIN28 (1 << 28)
+#define PINCTRL_PULL3_BANK3_PIN27 (1 << 27)
+#define PINCTRL_PULL3_BANK3_PIN26 (1 << 26)
+#define PINCTRL_PULL3_BANK3_PIN25 (1 << 25)
+#define PINCTRL_PULL3_BANK3_PIN24 (1 << 24)
+#define PINCTRL_PULL3_BANK3_PIN23 (1 << 23)
+#define PINCTRL_PULL3_BANK3_PIN22 (1 << 22)
+#define PINCTRL_PULL3_BANK3_PIN21 (1 << 21)
+#define PINCTRL_PULL3_BANK3_PIN20 (1 << 20)
+#define PINCTRL_PULL3_BANK3_PIN18 (1 << 18)
+#define PINCTRL_PULL3_BANK3_PIN17 (1 << 17)
+#define PINCTRL_PULL3_BANK3_PIN16 (1 << 16)
+#define PINCTRL_PULL3_BANK3_PIN15 (1 << 15)
+#define PINCTRL_PULL3_BANK3_PIN14 (1 << 14)
+#define PINCTRL_PULL3_BANK3_PIN13 (1 << 13)
+#define PINCTRL_PULL3_BANK3_PIN12 (1 << 12)
+#define PINCTRL_PULL3_BANK3_PIN11 (1 << 11)
+#define PINCTRL_PULL3_BANK3_PIN10 (1 << 10)
+#define PINCTRL_PULL3_BANK3_PIN09 (1 << 9)
+#define PINCTRL_PULL3_BANK3_PIN08 (1 << 8)
+#define PINCTRL_PULL3_BANK3_PIN07 (1 << 7)
+#define PINCTRL_PULL3_BANK3_PIN06 (1 << 6)
+#define PINCTRL_PULL3_BANK3_PIN05 (1 << 5)
+#define PINCTRL_PULL3_BANK3_PIN04 (1 << 4)
+#define PINCTRL_PULL3_BANK3_PIN03 (1 << 3)
+#define PINCTRL_PULL3_BANK3_PIN02 (1 << 2)
+#define PINCTRL_PULL3_BANK3_PIN01 (1 << 1)
+#define PINCTRL_PULL3_BANK3_PIN00 (1 << 0)
+
+#define PINCTRL_PULL4_BANK4_PIN20 (1 << 20)
+#define PINCTRL_PULL4_BANK4_PIN16 (1 << 16)
+#define PINCTRL_PULL4_BANK4_PIN15 (1 << 15)
+#define PINCTRL_PULL4_BANK4_PIN14 (1 << 14)
+#define PINCTRL_PULL4_BANK4_PIN13 (1 << 13)
+#define PINCTRL_PULL4_BANK4_PIN12 (1 << 12)
+#define PINCTRL_PULL4_BANK4_PIN11 (1 << 11)
+#define PINCTRL_PULL4_BANK4_PIN10 (1 << 10)
+#define PINCTRL_PULL4_BANK4_PIN09 (1 << 9)
+#define PINCTRL_PULL4_BANK4_PIN08 (1 << 8)
+#define PINCTRL_PULL4_BANK4_PIN07 (1 << 7)
+#define PINCTRL_PULL4_BANK4_PIN06 (1 << 6)
+#define PINCTRL_PULL4_BANK4_PIN05 (1 << 5)
+#define PINCTRL_PULL4_BANK4_PIN04 (1 << 4)
+#define PINCTRL_PULL4_BANK4_PIN03 (1 << 3)
+#define PINCTRL_PULL4_BANK4_PIN02 (1 << 2)
+#define PINCTRL_PULL4_BANK4_PIN01 (1 << 1)
+#define PINCTRL_PULL4_BANK4_PIN00 (1 << 0)
+
+#define PINCTRL_PULL5_BANK5_PIN26 (1 << 26)
+#define PINCTRL_PULL5_BANK5_PIN23 (1 << 23)
+#define PINCTRL_PULL5_BANK5_PIN22 (1 << 22)
+#define PINCTRL_PULL5_BANK5_PIN21 (1 << 21)
+#define PINCTRL_PULL5_BANK5_PIN20 (1 << 20)
+#define PINCTRL_PULL5_BANK5_PIN19 (1 << 19)
+#define PINCTRL_PULL5_BANK5_PIN18 (1 << 18)
+#define PINCTRL_PULL5_BANK5_PIN17 (1 << 17)
+#define PINCTRL_PULL5_BANK5_PIN16 (1 << 16)
+#define PINCTRL_PULL5_BANK5_PIN15 (1 << 15)
+#define PINCTRL_PULL5_BANK5_PIN14 (1 << 14)
+#define PINCTRL_PULL5_BANK5_PIN13 (1 << 13)
+#define PINCTRL_PULL5_BANK5_PIN12 (1 << 12)
+#define PINCTRL_PULL5_BANK5_PIN11 (1 << 11)
+#define PINCTRL_PULL5_BANK5_PIN10 (1 << 10)
+#define PINCTRL_PULL5_BANK5_PIN09 (1 << 9)
+#define PINCTRL_PULL5_BANK5_PIN08 (1 << 8)
+#define PINCTRL_PULL5_BANK5_PIN07 (1 << 7)
+#define PINCTRL_PULL5_BANK5_PIN06 (1 << 6)
+#define PINCTRL_PULL5_BANK5_PIN05 (1 << 5)
+#define PINCTRL_PULL5_BANK5_PIN04 (1 << 4)
+#define PINCTRL_PULL5_BANK5_PIN03 (1 << 3)
+#define PINCTRL_PULL5_BANK5_PIN02 (1 << 2)
+#define PINCTRL_PULL5_BANK5_PIN01 (1 << 1)
+#define PINCTRL_PULL5_BANK5_PIN00 (1 << 0)
+
+#define PINCTRL_PULL6_BANK6_PIN24 (1 << 24)
+#define PINCTRL_PULL6_BANK6_PIN23 (1 << 23)
+#define PINCTRL_PULL6_BANK6_PIN22 (1 << 22)
+#define PINCTRL_PULL6_BANK6_PIN21 (1 << 21)
+#define PINCTRL_PULL6_BANK6_PIN20 (1 << 20)
+#define PINCTRL_PULL6_BANK6_PIN19 (1 << 19)
+#define PINCTRL_PULL6_BANK6_PIN18 (1 << 18)
+#define PINCTRL_PULL6_BANK6_PIN17 (1 << 17)
+#define PINCTRL_PULL6_BANK6_PIN16 (1 << 16)
+#define PINCTRL_PULL6_BANK6_PIN14 (1 << 14)
+#define PINCTRL_PULL6_BANK6_PIN13 (1 << 13)
+#define PINCTRL_PULL6_BANK6_PIN12 (1 << 12)
+#define PINCTRL_PULL6_BANK6_PIN11 (1 << 11)
+#define PINCTRL_PULL6_BANK6_PIN10 (1 << 10)
+#define PINCTRL_PULL6_BANK6_PIN09 (1 << 9)
+#define PINCTRL_PULL6_BANK6_PIN08 (1 << 8)
+#define PINCTRL_PULL6_BANK6_PIN07 (1 << 7)
+#define PINCTRL_PULL6_BANK6_PIN06 (1 << 6)
+#define PINCTRL_PULL6_BANK6_PIN05 (1 << 5)
+#define PINCTRL_PULL6_BANK6_PIN04 (1 << 4)
+#define PINCTRL_PULL6_BANK6_PIN03 (1 << 3)
+#define PINCTRL_PULL6_BANK6_PIN02 (1 << 2)
+#define PINCTRL_PULL6_BANK6_PIN01 (1 << 1)
+#define PINCTRL_PULL6_BANK6_PIN00 (1 << 0)
+
+#define PINCTRL_DOUT0_DOUT_MASK 0x1fffffff
+#define PINCTRL_DOUT0_DOUT_OFFSET 0
+
+#define PINCTRL_DOUT1_DOUT_MASK 0xffffffff
+#define PINCTRL_DOUT1_DOUT_OFFSET 0
+
+#define PINCTRL_DOUT2_DOUT_MASK 0xfffffff
+#define PINCTRL_DOUT2_DOUT_OFFSET 0
+
+#define PINCTRL_DOUT3_DOUT_MASK 0x7fffffff
+#define PINCTRL_DOUT3_DOUT_OFFSET 0
+
+#define PINCTRL_DOUT4_DOUT_MASK 0x1fffff
+#define PINCTRL_DOUT4_DOUT_OFFSET 0
+
+#define PINCTRL_DIN0_DIN_MASK 0x1fffffff
+#define PINCTRL_DIN0_DIN_OFFSET 0
+
+#define PINCTRL_DIN1_DIN_MASK 0xffffffff
+#define PINCTRL_DIN1_DIN_OFFSET 0
+
+#define PINCTRL_DIN2_DIN_MASK 0xfffffff
+#define PINCTRL_DIN2_DIN_OFFSET 0
+
+#define PINCTRL_DIN3_DIN_MASK 0x7fffffff
+#define PINCTRL_DIN3_DIN_OFFSET 0
+
+#define PINCTRL_DIN4_DIN_MASK 0x1fffff
+#define PINCTRL_DIN4_DIN_OFFSET 0
+
+#define PINCTRL_DOE0_DOE_MASK 0x1fffffff
+#define PINCTRL_DOE0_DOE_OFFSET 0
+
+#define PINCTRL_DOE1_DOE_MASK 0xffffffff
+#define PINCTRL_DOE1_DOE_OFFSET 0
+
+#define PINCTRL_DOE2_DOE_MASK 0xfffffff
+#define PINCTRL_DOE2_DOE_OFFSET 0
+
+#define PINCTRL_DOE3_DOE_MASK 0x7fffffff
+#define PINCTRL_DOE3_DOE_OFFSET 0
+
+#define PINCTRL_DOE4_DOE_MASK 0x1fffff
+#define PINCTRL_DOE4_DOE_OFFSET 0
+
+#define PINCTRL_PIN2IRQ0_PIN2IRQ_MASK 0x1fffffff
+#define PINCTRL_PIN2IRQ0_PIN2IRQ_OFFSET 0
+
+#define PINCTRL_PIN2IRQ1_PIN2IRQ_MASK 0xffffffff
+#define PINCTRL_PIN2IRQ1_PIN2IRQ_OFFSET 0
+
+#define PINCTRL_PIN2IRQ2_PIN2IRQ_MASK 0xfffffff
+#define PINCTRL_PIN2IRQ2_PIN2IRQ_OFFSET 0
+
+#define PINCTRL_PIN2IRQ3_PIN2IRQ_MASK 0x7fffffff
+#define PINCTRL_PIN2IRQ3_PIN2IRQ_OFFSET 0
+
+#define PINCTRL_PIN2IRQ4_PIN2IRQ_MASK 0x1fffff
+#define PINCTRL_PIN2IRQ4_PIN2IRQ_OFFSET 0
+
+#define PINCTRL_IRQEN0_IRQEN_MASK 0x1fffffff
+#define PINCTRL_IRQEN0_IRQEN_OFFSET 0
+
+#define PINCTRL_IRQEN1_IRQEN_MASK 0xffffffff
+#define PINCTRL_IRQEN1_IRQEN_OFFSET 0
+
+#define PINCTRL_IRQEN2_IRQEN_MASK 0xfffffff
+#define PINCTRL_IRQEN2_IRQEN_OFFSET 0
+
+#define PINCTRL_IRQEN3_IRQEN_MASK 0x7fffffff
+#define PINCTRL_IRQEN3_IRQEN_OFFSET 0
+
+#define PINCTRL_IRQEN4_IRQEN_MASK 0x1fffff
+#define PINCTRL_IRQEN4_IRQEN_OFFSET 0
+
+#define PINCTRL_IRQLEVEL0_IRQLEVEL_MASK 0x1fffffff
+#define PINCTRL_IRQLEVEL0_IRQLEVEL_OFFSET 0
+
+#define PINCTRL_IRQLEVEL1_IRQLEVEL_MASK 0xffffffff
+#define PINCTRL_IRQLEVEL1_IRQLEVEL_OFFSET 0
+
+#define PINCTRL_IRQLEVEL2_IRQLEVEL_MASK 0xfffffff
+#define PINCTRL_IRQLEVEL2_IRQLEVEL_OFFSET 0
+
+#define PINCTRL_IRQLEVEL3_IRQLEVEL_MASK 0x7fffffff
+#define PINCTRL_IRQLEVEL3_IRQLEVEL_OFFSET 0
+
+#define PINCTRL_IRQLEVEL4_IRQLEVEL_MASK 0x1fffff
+#define PINCTRL_IRQLEVEL4_IRQLEVEL_OFFSET 0
+
+#define PINCTRL_IRQPOL0_IRQPOL_MASK 0x1fffffff
+#define PINCTRL_IRQPOL0_IRQPOL_OFFSET 0
+
+#define PINCTRL_IRQPOL1_IRQPOL_MASK 0xffffffff
+#define PINCTRL_IRQPOL1_IRQPOL_OFFSET 0
+
+#define PINCTRL_IRQPOL2_IRQPOL_MASK 0xfffffff
+#define PINCTRL_IRQPOL2_IRQPOL_OFFSET 0
+
+#define PINCTRL_IRQPOL3_IRQPOL_MASK 0x7fffffff
+#define PINCTRL_IRQPOL3_IRQPOL_OFFSET 0
+
+#define PINCTRL_IRQPOL4_IRQPOL_MASK 0x1fffff
+#define PINCTRL_IRQPOL4_IRQPOL_OFFSET 0
+
+#define PINCTRL_IRQSTAT0_IRQSTAT_MASK 0x1fffffff
+#define PINCTRL_IRQSTAT0_IRQSTAT_OFFSET 0
+
+#define PINCTRL_IRQSTAT1_IRQSTAT_MASK 0xffffffff
+#define PINCTRL_IRQSTAT1_IRQSTAT_OFFSET 0
+
+#define PINCTRL_IRQSTAT2_IRQSTAT_MASK 0xfffffff
+#define PINCTRL_IRQSTAT2_IRQSTAT_OFFSET 0
+
+#define PINCTRL_IRQSTAT3_IRQSTAT_MASK 0x7fffffff
+#define PINCTRL_IRQSTAT3_IRQSTAT_OFFSET 0
+
+#define PINCTRL_IRQSTAT4_IRQSTAT_MASK 0x1fffff
+#define PINCTRL_IRQSTAT4_IRQSTAT_OFFSET 0
+
+#define PINCTRL_EMI_ODT_CTRL_ADDRESS_CALIB_MASK (0x3 << 26)
+#define PINCTRL_EMI_ODT_CTRL_ADDRESS_CALIB_OFFSET 26
+#define PINCTRL_EMI_ODT_CTRL_ADDRESS_TLOAD_MASK (0x3 << 24)
+#define PINCTRL_EMI_ODT_CTRL_ADDRESS_TLOAD_OFFSET 24
+#define PINCTRL_EMI_ODT_CTRL_CONTROL_CALIB_MASK (0x3 << 22)
+#define PINCTRL_EMI_ODT_CTRL_CONTROL_CALIB_OFFSET 22
+#define PINCTRL_EMI_ODT_CTRL_CONTROL_TLOAD_MASK (0x3 << 20)
+#define PINCTRL_EMI_ODT_CTRL_CONTROL_TLOAD_OFFSET 20
+#define PINCTRL_EMI_ODT_CTRL_DUALPAD_CALIB_MASK (0x3 << 18)
+#define PINCTRL_EMI_ODT_CTRL_DUALPAD_CALIB_OFFSET 18
+#define PINCTRL_EMI_ODT_CTRL_DUALPAD_TLOAD_MASK (0x3 << 16)
+#define PINCTRL_EMI_ODT_CTRL_DUALPAD_TLOAD_OFFSET 16
+#define PINCTRL_EMI_ODT_CTRL_SLICE3_CALIB_MASK (0x3 << 14)
+#define PINCTRL_EMI_ODT_CTRL_SLICE3_CALIB_OFFSET 14
+#define PINCTRL_EMI_ODT_CTRL_SLICE3_TLOAD_MASK (0x3 << 12)
+#define PINCTRL_EMI_ODT_CTRL_SLICE3_TLOAD_OFFSET 12
+#define PINCTRL_EMI_ODT_CTRL_SLICE2_CALIB_MASK (0x3 << 10)
+#define PINCTRL_EMI_ODT_CTRL_SLICE2_CALIB_OFFSET 10
+#define PINCTRL_EMI_ODT_CTRL_SLICE2_TLOAD_MASK (0x3 << 8)
+#define PINCTRL_EMI_ODT_CTRL_SLICE2_TLOAD_OFFSET 8
+#define PINCTRL_EMI_ODT_CTRL_SLICE1_CALIB_MASK (0x3 << 6)
+#define PINCTRL_EMI_ODT_CTRL_SLICE1_CALIB_OFFSET 6
+#define PINCTRL_EMI_ODT_CTRL_SLICE1_TLOAD_MASK (0x3 << 4)
+#define PINCTRL_EMI_ODT_CTRL_SLICE1_TLOAD_OFFSET 4
+#define PINCTRL_EMI_ODT_CTRL_SLICE0_CALIB_MASK (0x3 << 2)
+#define PINCTRL_EMI_ODT_CTRL_SLICE0_CALIB_OFFSET 2
+#define PINCTRL_EMI_ODT_CTRL_SLICE0_TLOAD_MASK (0x3 << 0)
+#define PINCTRL_EMI_ODT_CTRL_SLICE0_TLOAD_OFFSET 0
+
+#define PINCTRL_EMI_DS_CTRL_DDR_MODE_MASK (0x3 << 16)
+#define PINCTRL_EMI_DS_CTRL_DDR_MODE_OFFSET 16
+#define PINCTRL_EMI_DS_CTRL_DDR_MODE_mDDR (0x0 << 16)
+#define PINCTRL_EMI_DS_CTRL_DDR_MODE_GPIO (0x1 << 16)
+#define PINCTRL_EMI_DS_CTRL_DDR_MODE_LVDDR2 (0x2 << 16)
+#define PINCTRL_EMI_DS_CTRL_DDR_MODE_DDR2 (0x3 << 16)
+#define PINCTRL_EMI_DS_CTRL_ADDRESS_MA_MASK (0x3 << 12)
+#define PINCTRL_EMI_DS_CTRL_ADDRESS_MA_OFFSET 12
+#define PINCTRL_EMI_DS_CTRL_CONTROL_MA_MASK (0x3 << 10)
+#define PINCTRL_EMI_DS_CTRL_CONTROL_MA_OFFSET 10
+#define PINCTRL_EMI_DS_CTRL_DUALPAD_MA_MASK (0x3 << 8)
+#define PINCTRL_EMI_DS_CTRL_DUALPAD_MA_OFFSET 8
+#define PINCTRL_EMI_DS_CTRL_SLICE3_MA_MASK (0x3 << 6)
+#define PINCTRL_EMI_DS_CTRL_SLICE3_MA_OFFSET 6
+#define PINCTRL_EMI_DS_CTRL_SLICE2_MA_MASK (0x3 << 4)
+#define PINCTRL_EMI_DS_CTRL_SLICE2_MA_OFFSET 4
+#define PINCTRL_EMI_DS_CTRL_SLICE1_MA_MASK (0x3 << 2)
+#define PINCTRL_EMI_DS_CTRL_SLICE1_MA_OFFSET 2
+#define PINCTRL_EMI_DS_CTRL_SLICE0_MA_MASK (0x3 << 0)
+#define PINCTRL_EMI_DS_CTRL_SLICE0_MA_OFFSET 0
+
+#endif /* __MX28_REGS_PINCTRL_H__ */
diff --git a/arch/arm/include/asm/arch-mx28/regs-power.h b/arch/arm/include/asm/arch-mx28/regs-power.h
new file mode 100644
index 0000000..9da63ad
--- /dev/null
+++ b/arch/arm/include/asm/arch-mx28/regs-power.h
@@ -0,0 +1,413 @@
+/*
+ * Freescale i.MX28 Power Controller Register Definitions
+ *
+ * Copyright (C) 2011 Marek Vasut <marek.vasut at gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#ifndef __MX28_REGS_POWER_H__
+#define __MX28_REGS_POWER_H__
+
+#include <asm/arch/regs-common.h>
+
+#ifndef __ASSEMBLY__
+struct mx28_power_regs {
+ mx28_reg(hw_power_ctrl)
+ mx28_reg(hw_power_5vctrl)
+ mx28_reg(hw_power_minpwr)
+ mx28_reg(hw_power_charge)
+ uint32_t hw_power_vdddctrl;
+ uint32_t reserved_vddd[3];
+ uint32_t hw_power_vddactrl;
+ uint32_t reserved_vdda[3];
+ uint32_t hw_power_vddioctrl;
+ uint32_t reserved_vddio[3];
+ uint32_t hw_power_vddmemctrl;
+ uint32_t reserved_vddmem[3];
+ uint32_t hw_power_dcdc4p2;
+ uint32_t reserved_dcdc4p2[3];
+ uint32_t hw_power_misc;
+ uint32_t reserved_misc[3];
+ uint32_t hw_power_dclimits;
+ uint32_t reserved_dclimits[3];
+ mx28_reg(hw_power_loopctrl)
+ uint32_t hw_power_sts;
+ uint32_t reserved_sts[3];
+ mx28_reg(hw_power_speed)
+ uint32_t hw_power_battmonitor;
+ uint32_t reserved_battmonitor[3];
+
+ uint32_t reserved[4];
+
+ mx28_reg(hw_power_reset)
+ mx28_reg(hw_power_debug)
+ mx28_reg(hw_power_thermal)
+ mx28_reg(hw_power_usb1ctrl)
+ mx28_reg(hw_power_special)
+ mx28_reg(hw_power_version)
+ mx28_reg(hw_power_anaclkctrl)
+ mx28_reg(hw_power_refctrl)
+};
+#endif
+
+#define POWER_CTRL_PSWITCH_MID_TRAN (1 << 27)
+#define POWER_CTRL_DCDC4P2_BO_IRQ (1 << 24)
+#define POWER_CTRL_ENIRQ_DCDC4P2_BO (1 << 23)
+#define POWER_CTRL_VDD5V_DROOP_IRQ (1 << 22)
+#define POWER_CTRL_ENIRQ_VDD5V_DROOP (1 << 21)
+#define POWER_CTRL_PSWITCH_IRQ (1 << 20)
+#define POWER_CTRL_PSWITCH_IRQ_SRC (1 << 19)
+#define POWER_CTRL_POLARITY_PSWITCH (1 << 18)
+#define POWER_CTRL_ENIRQ_PSWITCH (1 << 17)
+#define POWER_CTRL_POLARITY_DC_OK (1 << 16)
+#define POWER_CTRL_DC_OK_IRQ (1 << 15)
+#define POWER_CTRL_ENIRQ_DC_OK (1 << 14)
+#define POWER_CTRL_BATT_BO_IRQ (1 << 13)
+#define POWER_CTRL_ENIRQ_BATT_BO (1 << 12)
+#define POWER_CTRL_VDDIO_BO_IRQ (1 << 11)
+#define POWER_CTRL_ENIRQ_VDDIO_BO (1 << 10)
+#define POWER_CTRL_VDDA_BO_IRQ (1 << 9)
+#define POWER_CTRL_ENIRQ_VDDA_BO (1 << 8)
+#define POWER_CTRL_VDDD_BO_IRQ (1 << 7)
+#define POWER_CTRL_ENIRQ_VDDD_BO (1 << 6)
+#define POWER_CTRL_POLARITY_VBUSVALID (1 << 5)
+#define POWER_CTRL_VBUS_VALID_IRQ (1 << 4)
+#define POWER_CTRL_ENIRQ_VBUS_VALID (1 << 3)
+#define POWER_CTRL_POLARITY_VDD5V_GT_VDDIO (1 << 2)
+#define POWER_CTRL_VDD5V_GT_VDDIO_IRQ (1 << 1)
+#define POWER_CTRL_ENIRQ_VDD5V_GT_VDDIO (1 << 0)
+
+#define POWER_5VCTRL_VBUSDROOP_TRSH_MASK (0x3 << 30)
+#define POWER_5VCTRL_VBUSDROOP_TRSH_OFFSET 30
+#define POWER_5VCTRL_VBUSDROOP_TRSH_4V3 (0x0 << 30)
+#define POWER_5VCTRL_VBUSDROOP_TRSH_4V4 (0x1 << 30)
+#define POWER_5VCTRL_VBUSDROOP_TRSH_4V5 (0x2 << 30)
+#define POWER_5VCTRL_VBUSDROOP_TRSH_4V7 (0x3 << 30)
+#define POWER_5VCTRL_HEADROOM_ADJ_MASK (0x7 << 24)
+#define POWER_5VCTRL_HEADROOM_ADJ_OFFSET 24
+#define POWER_5VCTRL_PWD_CHARGE_4P2_MASK (0x3 << 20)
+#define POWER_5VCTRL_PWD_CHARGE_4P2_OFFSET 20
+#define POWER_5VCTRL_CHARGE_4P2_ILIMIT_MASK (0x3f << 12)
+#define POWER_5VCTRL_CHARGE_4P2_ILIMIT_OFFSET 12
+#define POWER_5VCTRL_VBUSVALID_TRSH_MASK (0x7 << 8)
+#define POWER_5VCTRL_VBUSVALID_TRSH_OFFSET 8
+#define POWER_5VCTRL_VBUSVALID_TRSH_2V9 (0x0 << 8)
+#define POWER_5VCTRL_VBUSVALID_TRSH_4V0 (0x1 << 8)
+#define POWER_5VCTRL_VBUSVALID_TRSH_4V1 (0x2 << 8)
+#define POWER_5VCTRL_VBUSVALID_TRSH_4V2 (0x3 << 8)
+#define POWER_5VCTRL_VBUSVALID_TRSH_4V3 (0x4 << 8)
+#define POWER_5VCTRL_VBUSVALID_TRSH_4V4 (0x5 << 8)
+#define POWER_5VCTRL_VBUSVALID_TRSH_4V5 (0x6 << 8)
+#define POWER_5VCTRL_VBUSVALID_TRSH_4V6 (0x7 << 8)
+#define POWER_5VCTRL_PWDN_5VBRNOUT (1 << 7)
+#define POWER_5VCTRL_ENABLE_LINREG_ILIMIT (1 << 6)
+#define POWER_5VCTRL_DCDC_XFER (1 << 5)
+#define POWER_5VCTRL_VBUSVALID_5VDETECT (1 << 4)
+#define POWER_5VCTRL_VBUSVALID_TO_B (1 << 3)
+#define POWER_5VCTRL_ILIMIT_EQ_ZERO (1 << 2)
+#define POWER_5VCTRL_PWRUP_VBUS_CMPS (1 << 1)
+#define POWER_5VCTRL_ENABLE_DCDC (1 << 0)
+
+#define POWER_MINPWR_LOWPWR_4P2 (1 << 14)
+#define POWER_MINPWR_PWD_BO (1 << 12)
+#define POWER_MINPWR_USE_VDDXTAL_VBG (1 << 11)
+#define POWER_MINPWR_PWD_ANA_CMPS (1 << 10)
+#define POWER_MINPWR_ENABLE_OSC (1 << 9)
+#define POWER_MINPWR_SELECT_OSC (1 << 8)
+#define POWER_MINPWR_FBG_OFF (1 << 7)
+#define POWER_MINPWR_DOUBLE_FETS (1 << 6)
+#define POWER_MINPWR_HALFFETS (1 << 5)
+#define POWER_MINPWR_LESSANA_I (1 << 4)
+#define POWER_MINPWR_PWD_XTAL24 (1 << 3)
+#define POWER_MINPWR_DC_STOPCLK (1 << 2)
+#define POWER_MINPWR_EN_DC_PFM (1 << 1)
+#define POWER_MINPWR_DC_HALFCLK (1 << 0)
+
+#define POWER_CHARGE_ADJ_VOLT_MASK (0x7 << 24)
+#define POWER_CHARGE_ADJ_VOLT_OFFSET 24
+#define POWER_CHARGE_ADJ_VOLT_M025P (0x1 << 24)
+#define POWER_CHARGE_ADJ_VOLT_P050P (0x2 << 24)
+#define POWER_CHARGE_ADJ_VOLT_M075P (0x3 << 24)
+#define POWER_CHARGE_ADJ_VOLT_P025P (0x4 << 24)
+#define POWER_CHARGE_ADJ_VOLT_M050P (0x5 << 24)
+#define POWER_CHARGE_ADJ_VOLT_P075P (0x6 << 24)
+#define POWER_CHARGE_ADJ_VOLT_M100P (0x7 << 24)
+#define POWER_CHARGE_ENABLE_LOAD (1 << 22)
+#define POWER_CHARGE_ENABLE_FAULT_DETECT (1 << 20)
+#define POWER_CHARGE_CHRG_STS_OFF (1 << 19)
+#define POWER_CHARGE_LIION_4P1 (1 << 18)
+#define POWER_CHARGE_PWD_BATTCHRG (1 << 16)
+#define POWER_CHARGE_ENABLE_CHARGER_USB1 (1 << 13)
+#define POWER_CHARGE_ENABLE_CHARGER_USB0 (1 << 12)
+#define POWER_CHARGE_STOP_ILIMIT_MASK (0xf << 8)
+#define POWER_CHARGE_STOP_ILIMIT_OFFSET 8
+#define POWER_CHARGE_STOP_ILIMIT_10MA (0x1 << 8)
+#define POWER_CHARGE_STOP_ILIMIT_20MA (0x2 << 8)
+#define POWER_CHARGE_STOP_ILIMIT_50MA (0x4 << 8)
+#define POWER_CHARGE_STOP_ILIMIT_100MA (0x8 << 8)
+#define POWER_CHARGE_BATTCHRG_I_MASK 0x3f
+#define POWER_CHARGE_BATTCHRG_I_OFFSET 0
+#define POWER_CHARGE_BATTCHRG_I_10MA 0x01
+#define POWER_CHARGE_BATTCHRG_I_20MA 0x02
+#define POWER_CHARGE_BATTCHRG_I_50MA 0x04
+#define POWER_CHARGE_BATTCHRG_I_100MA 0x08
+#define POWER_CHARGE_BATTCHRG_I_200MA 0x10
+#define POWER_CHARGE_BATTCHRG_I_400MA 0x20
+
+#define POWER_VDDDCTRL_ADJTN_MASK (0xf << 28)
+#define POWER_VDDDCTRL_ADJTN_OFFSET 28
+#define POWER_VDDDCTRL_PWDN_BRNOUT (1 << 23)
+#define POWER_VDDDCTRL_DISABLE_STEPPING (1 << 22)
+#define POWER_VDDDCTRL_ENABLE_LINREG (1 << 21)
+#define POWER_VDDDCTRL_DISABLE_FET (1 << 20)
+#define POWER_VDDDCTRL_LINREG_OFFSET_MASK (0x3 << 16)
+#define POWER_VDDDCTRL_LINREG_OFFSET_OFFSET 16
+#define POWER_VDDDCTRL_LINREG_OFFSET_0STEPS (0x0 << 16)
+#define POWER_VDDDCTRL_LINREG_OFFSET_1STEPS_ABOVE (0x1 << 16)
+#define POWER_VDDDCTRL_LINREG_OFFSET_1STEPS_BELOW (0x2 << 16)
+#define POWER_VDDDCTRL_LINREG_OFFSET_2STEPS_BELOW (0x3 << 16)
+#define POWER_VDDDCTRL_BO_OFFSET_MASK (0x7 << 8)
+#define POWER_VDDDCTRL_BO_OFFSET_OFFSET 8
+#define POWER_VDDDCTRL_TRG_MASK 0x1f
+#define POWER_VDDDCTRL_TRG_OFFSET 0
+
+#define POWER_VDDACTRL_PWDN_BRNOUT (1 << 19)
+#define POWER_VDDACTRL_DISABLE_STEPPING (1 << 18)
+#define POWER_VDDACTRL_ENABLE_LINREG (1 << 17)
+#define POWER_VDDACTRL_DISABLE_FET (1 << 16)
+#define POWER_VDDACTRL_LINREG_OFFSET_MASK (0x3 << 12)
+#define POWER_VDDACTRL_LINREG_OFFSET_OFFSET 12
+#define POWER_VDDACTRL_LINREG_OFFSET_0STEPS (0x0 << 12)
+#define POWER_VDDACTRL_LINREG_OFFSET_1STEPS_ABOVE (0x1 << 12)
+#define POWER_VDDACTRL_LINREG_OFFSET_1STEPS_BELOW (0x2 << 12)
+#define POWER_VDDACTRL_LINREG_OFFSET_2STEPS_BELOW (0x3 << 12)
+#define POWER_VDDACTRL_BO_OFFSET_MASK (0x7 << 8)
+#define POWER_VDDACTRL_BO_OFFSET_OFFSET 8
+#define POWER_VDDACTRL_TRG_MASK 0x1f
+#define POWER_VDDACTRL_TRG_OFFSET 0
+
+#define POWER_VDDIOCTRL_ADJTN_MASK (0xf << 20)
+#define POWER_VDDIOCTRL_ADJTN_OFFSET 20
+#define POWER_VDDIOCTRL_PWDN_BRNOUT (1 << 18)
+#define POWER_VDDIOCTRL_DISABLE_STEPPING (1 << 17)
+#define POWER_VDDIOCTRL_DISABLE_FET (1 << 16)
+#define POWER_VDDIOCTRL_LINREG_OFFSET_MASK (0x3 << 12)
+#define POWER_VDDIOCTRL_LINREG_OFFSET_OFFSET 12
+#define POWER_VDDIOCTRL_LINREG_OFFSET_0STEPS (0x0 << 12)
+#define POWER_VDDIOCTRL_LINREG_OFFSET_1STEPS_ABOVE (0x1 << 12)
+#define POWER_VDDIOCTRL_LINREG_OFFSET_1STEPS_BELOW (0x2 << 12)
+#define POWER_VDDIOCTRL_LINREG_OFFSET_2STEPS_BELOW (0x3 << 12)
+#define POWER_VDDIOCTRL_BO_OFFSET_MASK (0x7 << 8)
+#define POWER_VDDIOCTRL_BO_OFFSET_OFFSET 8
+#define POWER_VDDIOCTRL_TRG_MASK 0x1f
+#define POWER_VDDIOCTRL_TRG_OFFSET 0
+
+#define POWER_VDDMEMCTRL_PULLDOWN_ACTIVE (1 << 10)
+#define POWER_VDDMEMCTRL_ENABLE_ILIMIT (1 << 9)
+#define POWER_VDDMEMCTRL_ENABLE_LINREG (1 << 8)
+#define POWER_VDDMEMCTRL_BO_OFFSET_MASK (0x7 << 5)
+#define POWER_VDDMEMCTRL_BO_OFFSET_OFFSET 5
+#define POWER_VDDMEMCTRL_TRG_MASK 0x1f
+#define POWER_VDDMEMCTRL_TRG_OFFSET 0
+
+#define POWER_DCDC4P2_DROPOUT_CTRL_MASK (0xf << 28)
+#define POWER_DCDC4P2_DROPOUT_CTRL_OFFSET 28
+#define POWER_DCDC4P2_DROPOUT_CTRL_200MV (0x3 << 30)
+#define POWER_DCDC4P2_DROPOUT_CTRL_100MV (0x2 << 30)
+#define POWER_DCDC4P2_DROPOUT_CTRL_50MV (0x1 << 30)
+#define POWER_DCDC4P2_DROPOUT_CTRL_25MV (0x0 << 30)
+#define POWER_DCDC4P2_DROPOUT_CTRL_SRC_4P2 (0x0 << 28)
+#define POWER_DCDC4P2_DROPOUT_CTRL_SRC_4P2_LT_BATT (0x1 << 28)
+#define POWER_DCDC4P2_DROPOUT_CTRL_SRC_SEL (0x2 << 28)
+#define POWER_DCDC4P2_ISTEAL_THRESH_MASK (0x3 << 24)
+#define POWER_DCDC4P2_ISTEAL_THRESH_OFFSET 24
+#define POWER_DCDC4P2_ENABLE_4P2 (1 << 23)
+#define POWER_DCDC4P2_ENABLE_DCDC (1 << 22)
+#define POWER_DCDC4P2_HYST_DIR (1 << 21)
+#define POWER_DCDC4P2_HYST_THRESH (1 << 20)
+#define POWER_DCDC4P2_TRG_MASK (0x7 << 16)
+#define POWER_DCDC4P2_TRG_OFFSET 16
+#define POWER_DCDC4P2_TRG_4V2 (0x0 << 16)
+#define POWER_DCDC4P2_TRG_4V1 (0x1 << 16)
+#define POWER_DCDC4P2_TRG_4V0 (0x2 << 16)
+#define POWER_DCDC4P2_TRG_3V9 (0x3 << 16)
+#define POWER_DCDC4P2_TRG_BATT (0x4 << 16)
+#define POWER_DCDC4P2_BO_MASK (0x1f << 8)
+#define POWER_DCDC4P2_BO_OFFSET 8
+#define POWER_DCDC4P2_CMPTRIP_MASK 0x1f
+#define POWER_DCDC4P2_CMPTRIP_OFFSET 0
+
+#define POWER_MISC_FREQSEL_MASK (0x7 << 4)
+#define POWER_MISC_FREQSEL_OFFSET 4
+#define POWER_MISC_FREQSEL_20MHZ (0x1 << 4)
+#define POWER_MISC_FREQSEL_24MHZ (0x2 << 4)
+#define POWER_MISC_FREQSEL_19MHZ (0x3 << 4)
+#define POWER_MISC_FREQSEL_14MHZ (0x4 << 4)
+#define POWER_MISC_FREQSEL_18MHZ (0x5 << 4)
+#define POWER_MISC_FREQSEL_21MHZ (0x6 << 4)
+#define POWER_MISC_FREQSEL_17MHZ (0x7 << 4)
+#define POWER_MISC_DISABLE_FET_BO_LOGIC (1 << 3)
+#define POWER_MISC_DELAY_TIMING (1 << 2)
+#define POWER_MISC_TEST (1 << 1)
+#define POWER_MISC_SEL_PLLCLK (1 << 0)
+
+#define POWER_DCLIMITS_POSLIMIT_BUCK_MASK (0x7f << 8)
+#define POWER_DCLIMITS_POSLIMIT_BUCK_OFFSET 8
+#define POWER_DCLIMITS_NEGLIMIT_MASK 0x7f
+#define POWER_DCLIMITS_NETLIMIT_OFFSET 0
+
+#define POWER_LOOPCTRL_TOGGLE_DIF (1 << 20)
+#define POWER_LOOPCTRL_HYST_SIGN (1 << 19)
+#define POWER_LOOPCTRL_EN_CM_HYST (1 << 18)
+#define POWER_LOOPCTRL_EN_DF_HYST (1 << 17)
+#define POWER_LOOPCTRL_CM_HYST_THRESH (1 << 16)
+#define POWER_LOOPCTRL_DF_HYST_THRESH (1 << 15)
+#define POWER_LOOPCTRL_RCSCALE_THRESH (1 << 14)
+#define POWER_LOOPCTRL_EN_RCSCALE_MASK (0x3 << 12)
+#define POWER_LOOPCTRL_EN_RCSCALE_OFFSET 12
+#define POWER_LOOPCTRL_EN_RCSCALE_DIS (0x0 << 12)
+#define POWER_LOOPCTRL_EN_RCSCALE_2X (0x1 << 12)
+#define POWER_LOOPCTRL_EN_RCSCALE_4X (0x2 << 12)
+#define POWER_LOOPCTRL_EN_RCSCALE_8X (0x3 << 12)
+#define POWER_LOOPCTRL_DC_FF_MASK (0x7 << 8)
+#define POWER_LOOPCTRL_DC_FF_OFFSET 8
+#define POWER_LOOPCTRL_DC_R_MASK (0xf << 4)
+#define POWER_LOOPCTRL_DC_R_OFFSET 4
+#define POWER_LOOPCTRL_DC_C_MASK 0x3
+#define POWER_LOOPCTRL_DC_C_OFFSET 0
+#define POWER_LOOPCTRL_DC_C_MAX 0x0
+#define POWER_LOOPCTRL_DC_C_2X 0x1
+#define POWER_LOOPCTRL_DC_C_4X 0x2
+#define POWER_LOOPCTRL_DC_C_MIN 0x3
+
+#define POWER_STS_PWRUP_SOURCE_MASK (0x3f << 24)
+#define POWER_STS_PWRUP_SOURCE_OFFSET 24
+#define POWER_STS_PWRUP_SOURCE_5V (0x20 << 24)
+#define POWER_STS_PWRUP_SOURCE_RTC (0x10 << 24)
+#define POWER_STS_PWRUP_SOURCE_PSWITCH_HIGH (0x02 << 24)
+#define POWER_STS_PWRUP_SOURCE_PSWITCH_MID (0x01 << 24)
+#define POWER_STS_PSWITCH_MASK (0x3 << 20)
+#define POWER_STS_PSWITCH_OFFSET 20
+#define POWER_STS_THERMAL_WARNING (1 << 19)
+#define POWER_STS_VDDMEM_BO (1 << 18)
+#define POWER_STS_AVALID0_STATUS (1 << 17)
+#define POWER_STS_BVALID0_STATUS (1 << 16)
+#define POWER_STS_VBUSVALID0_STATUS (1 << 15)
+#define POWER_STS_SESSEND0_STATUS (1 << 14)
+#define POWER_STS_BATT_BO (1 << 13)
+#define POWER_STS_VDD5V_FAULT (1 << 12)
+#define POWER_STS_CHRGSTS (1 << 11)
+#define POWER_STS_DCDC_4P2_BO (1 << 10)
+#define POWER_STS_DC_OK (1 << 9)
+#define POWER_STS_VDDIO_BO (1 << 8)
+#define POWER_STS_VDDA_BO (1 << 7)
+#define POWER_STS_VDDD_BO (1 << 6)
+#define POWER_STS_VDD5V_GT_VDDIO (1 << 5)
+#define POWER_STS_VDD5V_DROOP (1 << 4)
+#define POWER_STS_AVALID0 (1 << 3)
+#define POWER_STS_BVALID0 (1 << 2)
+#define POWER_STS_VBUSVALID0 (1 << 1)
+#define POWER_STS_SESSEND0 (1 << 0)
+
+#define POWER_SPEED_STATUS_MASK (0xffff << 8)
+#define POWER_SPEED_STATUS_OFFSET 8
+#define POWER_SPEED_STATUS_SEL_MASK (0x3 << 6)
+#define POWER_SPEED_STATUS_SEL_OFFSET 6
+#define POWER_SPEED_STATUS_SEL_DCDC_STAT (0x0 << 6)
+#define POWER_SPEED_STATUS_SEL_CORE_STAT (0x1 << 6)
+#define POWER_SPEED_STATUS_SEL_ARM_STAT (0x2 << 6)
+#define POWER_SPEED_CTRL_MASK 0x3
+#define POWER_SPEED_CTRL_OFFSET 0
+#define POWER_SPEED_CTRL_SS_OFF 0x0
+#define POWER_SPEED_CTRL_SS_ON 0x1
+#define POWER_SPEED_CTRL_SS_ENABLE 0x3
+
+#define POWER_BATTMONITOR_BATT_VAL_MASK (0x3ff << 16)
+#define POWER_BATTMONITOR_BATT_VAL_OFFSET 16
+#define POWER_BATTMONITOR_PWDN_BATTBRNOUT_5VDETECT_EN (1 << 11)
+#define POWER_BATTMONITOR_EN_BATADJ (1 << 10)
+#define POWER_BATTMONITOR_PWDN_BATTBRNOUT (1 << 9)
+#define POWER_BATTMONITOR_BRWNOUT_PWD (1 << 8)
+#define POWER_BATTMONITOR_BRWNOUT_LVL_MASK 0x1f
+#define POWER_BATTMONITOR_BRWNOUT_LVL_OFFSET 0
+
+#define POWER_RESET_UNLOCK_MASK (0xffff << 16)
+#define POWER_RESET_UNLOCK_OFFSET 16
+#define POWER_RESET_UNLOCK_KEY (0x3e77 << 16)
+#define POWER_RESET_FASTFALL_PSWITCH_OFF (1 << 2)
+#define POWER_RESET_PWD_OFF (1 << 1)
+#define POWER_RESET_PWD (1 << 0)
+
+#define POWER_DEBUG_VBUSVALIDPIOLOCK (1 << 3)
+#define POWER_DEBUG_AVALIDPIOLOCK (1 << 2)
+#define POWER_DEBUG_BVALIDPIOLOCK (1 << 1)
+#define POWER_DEBUG_SESSENDPIOLOCK (1 << 0)
+
+#define POWER_THERMAL_TEST (1 << 8)
+#define POWER_THERMAL_PWD (1 << 7)
+#define POWER_THERMAL_LOW_POWER (1 << 6)
+#define POWER_THERMAL_OFFSET_ADJ_MASK (0x3 << 4)
+#define POWER_THERMAL_OFFSET_ADJ_OFFSET 4
+#define POWER_THERMAL_OFFSET_ADJ_ENABLE (1 << 3)
+#define POWER_THERMAL_TEMP_THRESHOLD_MASK 0x7
+#define POWER_THERMAL_TEMP_THRESHOLD_OFFSET 0
+
+#define POWER_USB1CTRL_AVALID1 (1 << 3)
+#define POWER_USB1CTRL_BVALID1 (1 << 2)
+#define POWER_USB1CTRL_VBUSVALID1 (1 << 1)
+#define POWER_USB1CTRL_SESSEND1 (1 << 0)
+
+#define POWER_SPECIAL_TEST_MASK 0xffffffff
+#define POWER_SPECIAL_TEST_OFFSET 0
+
+#define POWER_VERSION_MAJOR_MASK (0xff << 24)
+#define POWER_VERSION_MAJOR_OFFSET 24
+#define POWER_VERSION_MINOR_MASK (0xff << 16)
+#define POWER_VERSION_MINOR_OFFSET 16
+#define POWER_VERSION_STEP_MASK 0xffff
+#define POWER_VERSION_STEP_OFFSET 0
+
+#define POWER_ANACLKCTRL_CLKGATE_0 (1 << 31)
+#define POWER_ANACLKCTRL_OUTDIV_MASK (0x7 << 28)
+#define POWER_ANACLKCTRL_OUTDIV_OFFSET 28
+#define POWER_ANACLKCTRL_INVERT_OUTCLK (1 << 27)
+#define POWER_ANACLKCTRL_CLKGATE_I (1 << 26)
+#define POWER_ANACLKCTRL_DITHER_OFF (1 << 10)
+#define POWER_ANACLKCTRL_SLOW_DITHER (1 << 9)
+#define POWER_ANACLKCTRL_INVERT_INCLK (1 << 8)
+#define POWER_ANACLKCTRL_INCLK_SHIFT_MASK (0x3 << 4)
+#define POWER_ANACLKCTRL_INCLK_SHIFT_OFFSET 4
+#define POWER_ANACLKCTRL_INDIV_MASK 0x7
+#define POWER_ANACLKCTRL_INDIV_OFFSET 0
+
+#define POWER_REFCTRL_FASTSETTLING (1 << 26)
+#define POWER_REFCTRL_RAISE_REF (1 << 25)
+#define POWER_REFCTRL_XTAL_BGR_BIAS (1 << 24)
+#define POWER_REFCTRL_VBG_ADJ_MASK (0x7 << 20)
+#define POWER_REFCTRL_VBG_ADJ_OFFSET 20
+#define POWER_REFCTRL_LOW_PWR (1 << 19)
+#define POWER_REFCTRL_BIAS_CTRL_MASK (0x3 << 16)
+#define POWER_REFCTRL_BIAS_CTRL_OFFSET 16
+#define POWER_REFCTRL_VDDXTAL_TO_VDDD (1 << 14)
+#define POWER_REFCTRL_ADJ_ANA (1 << 13)
+#define POWER_REFCTRL_ADJ_VAG (1 << 12)
+#define POWER_REFCTRL_ANA_REFVAL_MASK (0xf << 8)
+#define POWER_REFCTRL_ANA_REFVAL_OFFSET 8
+#define POWER_REFCTRL_VAG_VAL_MASK (0xf << 4)
+#define POWER_REFCTRL_VAG_VAL_OFFSET 4
+
+#endif /* __MX28_REGS_POWER_H__ */
diff --git a/arch/arm/include/asm/arch-mx28/regs-rtc.h b/arch/arm/include/asm/arch-mx28/regs-rtc.h
new file mode 100644
index 0000000..fe2fda9
--- /dev/null
+++ b/arch/arm/include/asm/arch-mx28/regs-rtc.h
@@ -0,0 +1,147 @@
+/*
+ * Freescale i.MX28 RTC Register Definitions
+ *
+ * Copyright (C) 2011 Marek Vasut <marek.vasut at gmail.com>
+ * on behalf of DENX Software Engineering GmbH
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#ifndef __MX28_REGS_RTC_H__
+#define __MX28_REGS_RTC_H__
+
+#include <asm/arch/regs-common.h>
+
+#ifndef __ASSEMBLY__
+struct mx28_rtc_regs {
+ mx28_reg(hw_rtc_ctrl)
+ mx28_reg(hw_rtc_stat)
+ mx28_reg(hw_rtc_milliseconds)
+ mx28_reg(hw_rtc_seconds)
+ mx28_reg(hw_rtc_rtc_alarm)
+ mx28_reg(hw_rtc_watchdog)
+ mx28_reg(hw_rtc_persistent0)
+ mx28_reg(hw_rtc_persistent1)
+ mx28_reg(hw_rtc_persistent2)
+ mx28_reg(hw_rtc_persistent3)
+ mx28_reg(hw_rtc_persistent4)
+ mx28_reg(hw_rtc_persistent5)
+ mx28_reg(hw_rtc_debug)
+ mx28_reg(hw_rtc_version)
+};
+#endif
+
+#define RTC_CTRL_SFTRST (1 << 31)
+#define RTC_CTRL_CLKGATE (1 << 30)
+#define RTC_CTRL_SUPPRESS_COPY2ANALOG (1 << 6)
+#define RTC_CTRL_FORCE_UPDATE (1 << 5)
+#define RTC_CTRL_WATCHDOGEN (1 << 4)
+#define RTC_CTRL_ONEMSEC_IRQ (1 << 3)
+#define RTC_CTRL_ALARM_IRQ (1 << 2)
+#define RTC_CTRL_ONEMSEC_IRQ_EN (1 << 1)
+#define RTC_CTRL_ALARM_IRQ_EN (1 << 0)
+
+#define RTC_STAT_RTC_PRESENT (1 << 31)
+#define RTC_STAT_ALARM_PRESENT (1 << 30)
+#define RTC_STAT_WATCHDOG_PRESENT (1 << 29)
+#define RTC_STAT_XTAL32000_PRESENT (1 << 28)
+#define RTC_STAT_XTAL32768_PRESENT (1 << 27)
+#define RTC_STAT_STALE_REGS_MASK (0xff << 16)
+#define RTC_STAT_STALE_REGS_OFFSET 16
+#define RTC_STAT_NEW_REGS_MASK (0xff << 8)
+#define RTC_STAT_NEW_REGS_OFFSET 8
+
+#define RTC_MILLISECONDS_COUNT_MASK 0xffffffff
+#define RTC_MILLISECONDS_COUNT_OFFSET 0
+
+#define RTC_SECONDS_COUNT_MASK 0xffffffff
+#define RTC_SECONDS_COUNT_OFFSET 0
+
+#define RTC_ALARM_VALUE_MASK 0xffffffff
+#define RTC_ALARM_VALUE_OFFSET 0
+
+#define RTC_WATCHDOG_COUNT_MASK 0xffffffff
+#define RTC_WATCHDOG_COUNT_OFFSET 0
+
+#define RTC_PERSISTENT0_ADJ_POSLIMITBUCK_MASK (0xf << 28)
+#define RTC_PERSISTENT0_ADJ_POSLIMITBUCK_OFFSET 28
+#define RTC_PERSISTENT0_ADJ_POSLIMITBUCK_2V83 (0x0 << 28)
+#define RTC_PERSISTENT0_ADJ_POSLIMITBUCK_2V78 (0x1 << 28)
+#define RTC_PERSISTENT0_ADJ_POSLIMITBUCK_2V73 (0x2 << 28)
+#define RTC_PERSISTENT0_ADJ_POSLIMITBUCK_2V68 (0x3 << 28)
+#define RTC_PERSISTENT0_ADJ_POSLIMITBUCK_2V62 (0x4 << 28)
+#define RTC_PERSISTENT0_ADJ_POSLIMITBUCK_2V57 (0x5 << 28)
+#define RTC_PERSISTENT0_ADJ_POSLIMITBUCK_2V52 (0x6 << 28)
+#define RTC_PERSISTENT0_ADJ_POSLIMITBUCK_2V48 (0x7 << 28)
+#define RTC_PERSISTENT0_EXTERNAL_RESET (1 << 21)
+#define RTC_PERSISTENT0_THERMAL_RESET (1 << 20)
+#define RTC_PERSISTENT0_ENABLE_LRADC_PWRUP (1 << 18)
+#define RTC_PERSISTENT0_AUTO_RESTART (1 << 17)
+#define RTC_PERSISTENT0_DISABLE_PSWITCH (1 << 16)
+#define RTC_PERSISTENT0_LOWERBIAS_MASK (0xf << 14)
+#define RTC_PERSISTENT0_LOWERBIAS_OFFSET 14
+#define RTC_PERSISTENT0_LOWERBIAS_NOMINAL (0x0 << 14)
+#define RTC_PERSISTENT0_LOWERBIAS_M25P (0x1 << 14)
+#define RTC_PERSISTENT0_LOWERBIAS_M50P (0x3 << 14)
+#define RTC_PERSISTENT0_DISABLE_XTALOK (1 << 13)
+#define RTC_PERSISTENT0_MSEC_RES_MASK (0x1f << 8)
+#define RTC_PERSISTENT0_MSEC_RES_OFFSET 8
+#define RTC_PERSISTENT0_MSEC_RES_1MS (0x01 << 8)
+#define RTC_PERSISTENT0_MSEC_RES_2MS (0x02 << 8)
+#define RTC_PERSISTENT0_MSEC_RES_4MS (0x04 << 8)
+#define RTC_PERSISTENT0_MSEC_RES_8MS (0x08 << 8)
+#define RTC_PERSISTENT0_MSEC_RES_16MS (0x10 << 8)
+#define RTC_PERSISTENT0_ALARM_WAKE (1 << 7)
+#define RTC_PERSISTENT0_XTAL32_FREQ (1 << 6)
+#define RTC_PERSISTENT0_XTAL32KHZ_PWRUP (1 << 5)
+#define RTC_PERSISTENT0_XTAL24KHZ_PWRUP (1 << 4)
+#define RTC_PERSISTENT0_LCK_SECS (1 << 3)
+#define RTC_PERSISTENT0_ALARM_EN (1 << 2)
+#define RTC_PERSISTENT0_ALARM_WAKE_EN (1 << 1)
+#define RTC_PERSISTENT0_CLOCKSOURCE (1 << 0)
+
+#define RTC_PERSISTENT1_GENERAL_MASK 0xffffffff
+#define RTC_PERSISTENT1_GENERAL_OFFSET 0
+#define RTC_PERSISTENT1_GENERAL_OTG_ALT_ROLE 0x0080
+#define RTC_PERSISTENT1_GENERAL_OTG_HNP 0x0100
+#define RTC_PERSISTENT1_GENERAL_USB_LPM 0x0200
+#define RTC_PERSISTENT1_GENERAL_SKIP_CHECKDISK 0x0400
+#define RTC_PERSISTENT1_GENERAL_USB_BOOT_PLAYER 0x0800
+#define RTC_PERSISTENT1_GENERAL_ENUM_500MA_2X 0x1000
+
+#define RTC_PERSISTENT2_GENERAL_MASK 0xffffffff
+#define RTC_PERSISTENT2_GENERAL_OFFSET 0
+
+#define RTC_PERSISTENT3_GENERAL_MASK 0xffffffff
+#define RTC_PERSISTENT3_GENERAL_OFFSET 0
+
+#define RTC_PERSISTENT4_GENERAL_MASK 0xffffffff
+#define RTC_PERSISTENT4_GENERAL_OFFSET 0
+
+#define RTC_PERSISTENT5_GENERAL_MASK 0xffffffff
+#define RTC_PERSISTENT5_GENERAL_OFFSET 0
+
+#define RTC_DEBUG_WATCHDOG_RESET_MASK (1 << 1)
+#define RTC_DEBUG_WATCHDOG_RESET (1 << 0)
+
+#define RTC_VERSION_MAJOR_MASK (0xff << 24)
+#define RTC_VERSION_MAJOR_OFFSET 24
+#define RTC_VERSION_MINOR_MASK (0xff << 16)
+#define RTC_VERSION_MINOR_OFFSET 16
+#define RTC_VERSION_STEP_MASK 0xffff
+#define RTC_VERSION_STEP_OFFSET 0
+
+#endif /* __MX28_REGS_RTC_H__ */
diff --git a/arch/arm/include/asm/arch-mx28/regs-ssp.h b/arch/arm/include/asm/arch-mx28/regs-ssp.h
new file mode 100644
index 0000000..ab3870c
--- /dev/null
+++ b/arch/arm/include/asm/arch-mx28/regs-ssp.h
@@ -0,0 +1,349 @@
+/*
+ * Freescale i.MX28 SSP Register Definitions
+ *
+ * Copyright (C) 2011 Marek Vasut <marek.vasut at gmail.com>
+ *
+ * Based on code from LTIB:
+ * Copyright 2008-2010 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#ifndef __MX28_REGS_SSP_H__
+#define __MX28_REGS_SSP_H__
+
+#include <asm/arch/regs-common.h>
+
+#ifndef __ASSEMBLY__
+struct mx28_ssp_regs {
+ mx28_reg(hw_ssp_ctrl0)
+ mx28_reg(hw_ssp_cmd0)
+ mx28_reg(hw_ssp_cmd1)
+ mx28_reg(hw_ssp_xfer_size)
+ mx28_reg(hw_ssp_block_size)
+ mx28_reg(hw_ssp_compref)
+ mx28_reg(hw_ssp_compmask)
+ mx28_reg(hw_ssp_timing)
+ mx28_reg(hw_ssp_ctrl1)
+ mx28_reg(hw_ssp_data)
+ mx28_reg(hw_ssp_sdresp0)
+ mx28_reg(hw_ssp_sdresp1)
+ mx28_reg(hw_ssp_sdresp2)
+ mx28_reg(hw_ssp_sdresp3)
+ mx28_reg(hw_ssp_ddr_ctrl)
+ mx28_reg(hw_ssp_dll_ctrl)
+ mx28_reg(hw_ssp_status)
+ mx28_reg(hw_ssp_dll_sts)
+ mx28_reg(hw_ssp_debug)
+ mx28_reg(hw_ssp_version)
+};
+#endif
+
+#define SSP_CTRL0_SFTRST (1 << 31)
+#define SSP_CTRL0_CLKGATE (1 << 30)
+#define SSP_CTRL0_RUN (1 << 29)
+#define SSP_CTRL0_SDIO_IRQ_CHECK (1 << 28)
+#define SSP_CTRL0_LOCK_CS (1 << 27)
+#define SSP_CTRL0_IGNORE_CRC (1 << 26)
+#define SSP_CTRL0_READ (1 << 25)
+#define SSP_CTRL0_DATA_XFER (1 << 24)
+#define SSP_CTRL0_BUS_WIDTH_MASK (0x3 << 22)
+#define SSP_CTRL0_BUS_WIDTH_OFFSET 22
+#define SSP_CTRL0_BUS_WIDTH_ONE_BIT (0x0 << 22)
+#define SSP_CTRL0_BUS_WIDTH_FOUR_BIT (0x1 << 22)
+#define SSP_CTRL0_BUS_WIDTH_EIGHT_BIT (0x2 << 22)
+#define SSP_CTRL0_WAIT_FOR_IRQ (1 << 21)
+#define SSP_CTRL0_WAIT_FOR_CMD (1 << 20)
+#define SSP_CTRL0_LONG_RESP (1 << 19)
+#define SSP_CTRL0_CHECK_RESP (1 << 18)
+#define SSP_CTRL0_GET_RESP (1 << 17)
+#define SSP_CTRL0_ENABLE (1 << 16)
+
+#define SSP_CMD0_SOFT_TERMINATE (1 << 26)
+#define SSP_CMD0_DBL_DATA_RATE_EN (1 << 25)
+#define SSP_CMD0_PRIM_BOOT_OP_EN (1 << 24)
+#define SSP_CMD0_BOOT_ACK_EN (1 << 23)
+#define SSP_CMD0_SLOW_CLKING_EN (1 << 22)
+#define SSP_CMD0_CONT_CLKING_EN (1 << 21)
+#define SSP_CMD0_APPEND_8CYC (1 << 20)
+#define SSP_CMD0_CMD_MASK 0xff
+#define SSP_CMD0_CMD_OFFSET 0
+#define SSP_CMD0_CMD_MMC_GO_IDLE_STATE 0x00
+#define SSP_CMD0_CMD_MMC_SEND_OP_COND 0x01
+#define SSP_CMD0_CMD_MMC_ALL_SEND_CID 0x02
+#define SSP_CMD0_CMD_MMC_SET_RELATIVE_ADDR 0x03
+#define SSP_CMD0_CMD_MMC_SET_DSR 0x04
+#define SSP_CMD0_CMD_MMC_RESERVED_5 0x05
+#define SSP_CMD0_CMD_MMC_SWITCH 0x06
+#define SSP_CMD0_CMD_MMC_SELECT_DESELECT_CARD 0x07
+#define SSP_CMD0_CMD_MMC_SEND_EXT_CSD 0x08
+#define SSP_CMD0_CMD_MMC_SEND_CSD 0x09
+#define SSP_CMD0_CMD_MMC_SEND_CID 0x0a
+#define SSP_CMD0_CMD_MMC_READ_DAT_UNTIL_STOP 0x0b
+#define SSP_CMD0_CMD_MMC_STOP_TRANSMISSION 0x0c
+#define SSP_CMD0_CMD_MMC_SEND_STATUS 0x0d
+#define SSP_CMD0_CMD_MMC_BUSTEST_R 0x0e
+#define SSP_CMD0_CMD_MMC_GO_INACTIVE_STATE 0x0f
+#define SSP_CMD0_CMD_MMC_SET_BLOCKLEN 0x10
+#define SSP_CMD0_CMD_MMC_READ_SINGLE_BLOCK 0x11
+#define SSP_CMD0_CMD_MMC_READ_MULTIPLE_BLOCK 0x12
+#define SSP_CMD0_CMD_MMC_BUSTEST_W 0x13
+#define SSP_CMD0_CMD_MMC_WRITE_DAT_UNTIL_STOP 0x14
+#define SSP_CMD0_CMD_MMC_SET_BLOCK_COUNT 0x17
+#define SSP_CMD0_CMD_MMC_WRITE_BLOCK 0x18
+#define SSP_CMD0_CMD_MMC_WRITE_MULTIPLE_BLOCK 0x19
+#define SSP_CMD0_CMD_MMC_PROGRAM_CID 0x1a
+#define SSP_CMD0_CMD_MMC_PROGRAM_CSD 0x1b
+#define SSP_CMD0_CMD_MMC_SET_WRITE_PROT 0x1c
+#define SSP_CMD0_CMD_MMC_CLR_WRITE_PROT 0x1d
+#define SSP_CMD0_CMD_MMC_SEND_WRITE_PROT 0x1e
+#define SSP_CMD0_CMD_MMC_ERASE_GROUP_START 0x23
+#define SSP_CMD0_CMD_MMC_ERASE_GROUP_END 0x24
+#define SSP_CMD0_CMD_MMC_ERASE 0x26
+#define SSP_CMD0_CMD_MMC_FAST_IO 0x27
+#define SSP_CMD0_CMD_MMC_GO_IRQ_STATE 0x28
+#define SSP_CMD0_CMD_MMC_LOCK_UNLOCK 0x2a
+#define SSP_CMD0_CMD_MMC_APP_CMD 0x37
+#define SSP_CMD0_CMD_MMC_GEN_CMD 0x38
+#define SSP_CMD0_CMD_SD_GO_IDLE_STATE 0x00
+#define SSP_CMD0_CMD_SD_ALL_SEND_CID 0x02
+#define SSP_CMD0_CMD_SD_SEND_RELATIVE_ADDR 0x03
+#define SSP_CMD0_CMD_SD_SET_DSR 0x04
+#define SSP_CMD0_CMD_SD_IO_SEND_OP_COND 0x05
+#define SSP_CMD0_CMD_SD_SELECT_DESELECT_CARD 0x07
+#define SSP_CMD0_CMD_SD_SEND_CSD 0x09
+#define SSP_CMD0_CMD_SD_SEND_CID 0x0a
+#define SSP_CMD0_CMD_SD_STOP_TRANSMISSION 0x0c
+#define SSP_CMD0_CMD_SD_SEND_STATUS 0x0d
+#define SSP_CMD0_CMD_SD_GO_INACTIVE_STATE 0x0f
+#define SSP_CMD0_CMD_SD_SET_BLOCKLEN 0x10
+#define SSP_CMD0_CMD_SD_READ_SINGLE_BLOCK 0x11
+#define SSP_CMD0_CMD_SD_READ_MULTIPLE_BLOCK 0x12
+#define SSP_CMD0_CMD_SD_WRITE_BLOCK 0x18
+#define SSP_CMD0_CMD_SD_WRITE_MULTIPLE_BLOCK 0x19
+#define SSP_CMD0_CMD_SD_PROGRAM_CSD 0x1b
+#define SSP_CMD0_CMD_SD_SET_WRITE_PROT 0x1c
+#define SSP_CMD0_CMD_SD_CLR_WRITE_PROT 0x1d
+#define SSP_CMD0_CMD_SD_SEND_WRITE_PROT 0x1e
+#define SSP_CMD0_CMD_SD_ERASE_WR_BLK_START 0x20
+#define SSP_CMD0_CMD_SD_ERASE_WR_BLK_END 0x21
+#define SSP_CMD0_CMD_SD_ERASE_GROUP_START 0x23
+#define SSP_CMD0_CMD_SD_ERASE_GROUP_END 0x24
+#define SSP_CMD0_CMD_SD_ERASE 0x26
+#define SSP_CMD0_CMD_SD_LOCK_UNLOCK 0x2a
+#define SSP_CMD0_CMD_SD_IO_RW_DIRECT 0x34
+#define SSP_CMD0_CMD_SD_IO_RW_EXTENDED 0x35
+#define SSP_CMD0_CMD_SD_APP_CMD 0x37
+#define SSP_CMD0_CMD_SD_GEN_CMD 0x38
+
+#define SSP_CMD1_CMD_ARG_MASK 0xffffffff
+#define SSP_CMD1_CMD_ARG_OFFSET 0
+
+#define SSP_XFER_SIZE_XFER_COUNT_MASK 0xffffffff
+#define SSP_XFER_SIZE_XFER_COUNT_OFFSET 0
+
+#define SSP_BLOCK_SIZE_BLOCK_COUNT_MASK (0xffffff << 4)
+#define SSP_BLOCK_SIZE_BLOCK_COUNT_OFFSET 4
+#define SSP_BLOCK_SIZE_BLOCK_SIZE_MASK 0xf
+#define SSP_BLOCK_SIZE_BLOCK_SIZE_OFFSET 0
+
+#define SSP_COMPREF_REFERENCE_MASK 0xffffffff
+#define SSP_COMPREF_REFERENCE_OFFSET 0
+
+#define SSP_COMPMASK_MASK_MASK 0xffffffff
+#define SSP_COMPMASK_MASK_OFFSET 0
+
+#define SSP_TIMING_TIMEOUT_MASK (0xffff << 16)
+#define SSP_TIMING_TIMEOUT_OFFSET 16
+#define SSP_TIMING_CLOCK_DIVIDE_MASK (0xff << 8)
+#define SSP_TIMING_CLOCK_DIVIDE_OFFSET 8
+#define SSP_TIMING_CLOCK_RATE_MASK 0xff
+#define SSP_TIMING_CLOCK_RATE_OFFSET 0
+
+#define SSP_CTRL1_SDIO_IRQ (1 << 31)
+#define SSP_CTRL1_SDIO_IRQ_EN (1 << 30)
+#define SSP_CTRL1_RESP_ERR_IRQ (1 << 29)
+#define SSP_CTRL1_RESP_ERR_IRQ_EN (1 << 28)
+#define SSP_CTRL1_RESP_TIMEOUT_IRQ (1 << 27)
+#define SSP_CTRL1_RESP_TIMEOUT_IRQ_EN (1 << 26)
+#define SSP_CTRL1_DATA_TIMEOUT_IRQ (1 << 25)
+#define SSP_CTRL1_DATA_TIMEOUT_IRQ_EN (1 << 24)
+#define SSP_CTRL1_DATA_CRC_IRQ (1 << 23)
+#define SSP_CTRL1_DATA_CRC_IRQ_EN (1 << 22)
+#define SSP_CTRL1_FIFO_UNDERRUN_IRQ (1 << 21)
+#define SSP_CTRL1_FIFO_UNDERRUN_EN (1 << 20)
+#define SSP_CTRL1_CEATA_CCS_ERR_IRQ (1 << 19)
+#define SSP_CTRL1_CEATA_CCS_ERR_IRQ_EN (1 << 18)
+#define SSP_CTRL1_RECV_TIMEOUT_IRQ (1 << 17)
+#define SSP_CTRL1_RECV_TIMEOUT_IRQ_EN (1 << 16)
+#define SSP_CTRL1_FIFO_OVERRUN_IRQ (1 << 15)
+#define SSP_CTRL1_FIFO_OVERRUN_IRQ_EN (1 << 14)
+#define SSP_CTRL1_DMA_ENABLE (1 << 13)
+#define SSP_CTRL1_CEATA_CCS_ERR_EN (1 << 12)
+#define SSP_CTRL1_SLAVE_OUT_DISABLE (1 << 11)
+#define SSP_CTRL1_PHASE (1 << 10)
+#define SSP_CTRL1_POLARITY (1 << 9)
+#define SSP_CTRL1_SLAVE_MODE (1 << 8)
+#define SSP_CTRL1_WORD_LENGTH_MASK (0xf << 4)
+#define SSP_CTRL1_WORD_LENGTH_OFFSET 4
+#define SSP_CTRL1_WORD_LENGTH_RESERVED0 (0x0 << 4)
+#define SSP_CTRL1_WORD_LENGTH_RESERVED1 (0x1 << 4)
+#define SSP_CTRL1_WORD_LENGTH_RESERVED2 (0x2 << 4)
+#define SSP_CTRL1_WORD_LENGTH_FOUR_BITS (0x3 << 4)
+#define SSP_CTRL1_WORD_LENGTH_EIGHT_BITS (0x7 << 4)
+#define SSP_CTRL1_WORD_LENGTH_SIXTEEN_BITS (0xf << 4)
+#define SSP_CTRL1_SSP_MODE_MASK 0xf
+#define SSP_CTRL1_SSP_MODE_OFFSET 0
+#define SSP_CTRL1_SSP_MODE_SPI 0x0
+#define SSP_CTRL1_SSP_MODE_SSI 0x1
+#define SSP_CTRL1_SSP_MODE_SD_MMC 0x3
+#define SSP_CTRL1_SSP_MODE_MS 0x4
+
+#define SSP_DATA_DATA_MASK 0xffffffff
+#define SSP_DATA_DATA_OFFSET 0
+
+#define SSP_SDRESP0_RESP0_MASK 0xffffffff
+#define SSP_SDRESP0_RESP0_OFFSET 0
+
+#define SSP_SDRESP1_RESP1_MASK 0xffffffff
+#define SSP_SDRESP1_RESP1_OFFSET 0
+
+#define SSP_SDRESP2_RESP2_MASK 0xffffffff
+#define SSP_SDRESP2_RESP2_OFFSET 0
+
+#define SSP_SDRESP3_RESP3_MASK 0xffffffff
+#define SSP_SDRESP3_RESP3_OFFSET 0
+
+#define SSP_DDR_CTRL_DMA_BURST_TYPE_MASK (0x3 << 30)
+#define SSP_DDR_CTRL_DMA_BURST_TYPE_OFFSET 30
+#define SSP_DDR_CTRL_NIBBLE_POS (1 << 1)
+#define SSP_DDR_CTRL_TXCLK_DELAY_TYPE (1 << 0)
+
+#define SSP_DLL_CTRL_REF_UPDATE_INT_MASK (0xf << 28)
+#define SSP_DLL_CTRL_REF_UPDATE_INT_OFFSET 28
+#define SSP_DLL_CTRL_SLV_UPDATE_INT_MASK (0xff << 20)
+#define SSP_DLL_CTRL_SLV_UPDATE_INT_OFFSET 20
+#define SSP_DLL_CTRL_SLV_OVERRIDE_VAL_MASK (0x3f << 10)
+#define SSP_DLL_CTRL_SLV_OVERRIDE_VAL_OFFSET 10
+#define SSP_DLL_CTRL_SLV_OVERRIDE (1 << 9)
+#define SSP_DLL_CTRL_GATE_UPDATE (1 << 7)
+#define SSP_DLL_CTRL_SLV_DLY_TARGET_MASK (0xf << 3)
+#define SSP_DLL_CTRL_SLV_DLY_TARGET_OFFSET 3
+#define SSP_DLL_CTRL_SLV_FORCE_UPD (1 << 2)
+#define SSP_DLL_CTRL_RESET (1 << 1)
+#define SSP_DLL_CTRL_ENABLE (1 << 0)
+
+#define SSP_STATUS_PRESENT (1 << 31)
+#define SSP_STATUS_MS_PRESENT (1 << 30)
+#define SSP_STATUS_SD_PRESENT (1 << 29)
+#define SSP_STATUS_CARD_DETECT (1 << 28)
+#define SSP_STATUS_DMABURST (1 << 22)
+#define SSP_STATUS_DMASENSE (1 << 21)
+#define SSP_STATUS_DMATERM (1 << 20)
+#define SSP_STATUS_DMAREQ (1 << 19)
+#define SSP_STATUS_DMAEND (1 << 18)
+#define SSP_STATUS_SDIO_IRQ (1 << 17)
+#define SSP_STATUS_RESP_CRC_ERR (1 << 16)
+#define SSP_STATUS_RESP_ERR (1 << 15)
+#define SSP_STATUS_RESP_TIMEOUT (1 << 14)
+#define SSP_STATUS_DATA_CRC_ERR (1 << 13)
+#define SSP_STATUS_TIMEOUT (1 << 12)
+#define SSP_STATUS_RECV_TIMEOUT_STAT (1 << 11)
+#define SSP_STATUS_CEATA_CCS_ERR (1 << 10)
+#define SSP_STATUS_FIFO_OVRFLW (1 << 9)
+#define SSP_STATUS_FIFO_FULL (1 << 8)
+#define SSP_STATUS_FIFO_EMPTY (1 << 5)
+#define SSP_STATUS_FIFO_UNDRFLW (1 << 4)
+#define SSP_STATUS_CMD_BUSY (1 << 3)
+#define SSP_STATUS_DATA_BUSY (1 << 2)
+#define SSP_STATUS_BUSY (1 << 0)
+
+#define SSP_DLL_STS_REF_SEL_MASK (0x3f << 8)
+#define SSP_DLL_STS_REF_SEL_OFFSET 8
+#define SSP_DLL_STS_SLV_SEL_MASK (0x3f << 2)
+#define SSP_DLL_STS_SLV_SEL_OFFSET 2
+#define SSP_DLL_STS_REF_LOCK (1 << 1)
+#define SSP_DLL_STS_SLV_LOCK (1 << 0)
+
+#define SSP_DEBUG_DATACRC_ERR_MASK (0xf << 28)
+#define SSP_DEBUG_DATACRC_ERR_OFFSET 28
+#define SSP_DEBUG_DATA_STALL (1 << 27)
+#define SSP_DEBUG_DAT_SM_MASK (0x7 << 24)
+#define SSP_DEBUG_DAT_SM_OFFSET 24
+#define SSP_DEBUG_DAT_SM_DSM_IDLE (0x0 << 24)
+#define SSP_DEBUG_DAT_SM_DSM_WORD (0x2 << 24)
+#define SSP_DEBUG_DAT_SM_DSM_CRC1 (0x3 << 24)
+#define SSP_DEBUG_DAT_SM_DSM_CRC2 (0x4 << 24)
+#define SSP_DEBUG_DAT_SM_DSM_END (0x5 << 24)
+#define SSP_DEBUG_MSTK_SM_MASK (0xf << 20)
+#define SSP_DEBUG_MSTK_SM_OFFSET 20
+#define SSP_DEBUG_MSTK_SM_MSTK_IDLE (0x0 << 20)
+#define SSP_DEBUG_MSTK_SM_MSTK_CKON (0x1 << 20)
+#define SSP_DEBUG_MSTK_SM_MSTK_BS1 (0x2 << 20)
+#define SSP_DEBUG_MSTK_SM_MSTK_TPC (0x3 << 20)
+#define SSP_DEBUG_MSTK_SM_MSTK_BS2 (0x4 << 20)
+#define SSP_DEBUG_MSTK_SM_MSTK_HDSHK (0x5 << 20)
+#define SSP_DEBUG_MSTK_SM_MSTK_BS3 (0x6 << 20)
+#define SSP_DEBUG_MSTK_SM_MSTK_RW (0x7 << 20)
+#define SSP_DEBUG_MSTK_SM_MSTK_CRC1 (0x8 << 20)
+#define SSP_DEBUG_MSTK_SM_MSTK_CRC2 (0x9 << 20)
+#define SSP_DEBUG_MSTK_SM_MSTK_BS0 (0xa << 20)
+#define SSP_DEBUG_MSTK_SM_MSTK_END1 (0xb << 20)
+#define SSP_DEBUG_MSTK_SM_MSTK_END2W (0xc << 20)
+#define SSP_DEBUG_MSTK_SM_MSTK_END2R (0xd << 20)
+#define SSP_DEBUG_MSTK_SM_MSTK_DONE (0xe << 20)
+#define SSP_DEBUG_CMD_OE (1 << 19)
+#define SSP_DEBUG_DMA_SM_MASK (0x7 << 16)
+#define SSP_DEBUG_DMA_SM_OFFSET 16
+#define SSP_DEBUG_DMA_SM_DMA_IDLE (0x0 << 16)
+#define SSP_DEBUG_DMA_SM_DMA_DMAREQ (0x1 << 16)
+#define SSP_DEBUG_DMA_SM_DMA_DMAACK (0x2 << 16)
+#define SSP_DEBUG_DMA_SM_DMA_STALL (0x3 << 16)
+#define SSP_DEBUG_DMA_SM_DMA_BUSY (0x4 << 16)
+#define SSP_DEBUG_DMA_SM_DMA_DONE (0x5 << 16)
+#define SSP_DEBUG_DMA_SM_DMA_COUNT (0x6 << 16)
+#define SSP_DEBUG_MMC_SM_MASK (0xf << 12)
+#define SSP_DEBUG_MMC_SM_OFFSET 12
+#define SSP_DEBUG_MMC_SM_MMC_IDLE (0x0 << 12)
+#define SSP_DEBUG_MMC_SM_MMC_CMD (0x1 << 12)
+#define SSP_DEBUG_MMC_SM_MMC_TRC (0x2 << 12)
+#define SSP_DEBUG_MMC_SM_MMC_RESP (0x3 << 12)
+#define SSP_DEBUG_MMC_SM_MMC_RPRX (0x4 << 12)
+#define SSP_DEBUG_MMC_SM_MMC_TX (0x5 << 12)
+#define SSP_DEBUG_MMC_SM_MMC_CTOK (0x6 << 12)
+#define SSP_DEBUG_MMC_SM_MMC_RX (0x7 << 12)
+#define SSP_DEBUG_MMC_SM_MMC_CCS (0x8 << 12)
+#define SSP_DEBUG_MMC_SM_MMC_PUP (0x9 << 12)
+#define SSP_DEBUG_MMC_SM_MMC_WAIT (0xa << 12)
+#define SSP_DEBUG_CMD_SM_MASK (0x3 << 10)
+#define SSP_DEBUG_CMD_SM_OFFSET 10
+#define SSP_DEBUG_CMD_SM_CSM_IDLE (0x0 << 10)
+#define SSP_DEBUG_CMD_SM_CSM_INDEX (0x1 << 10)
+#define SSP_DEBUG_CMD_SM_CSM_ARG (0x2 << 10)
+#define SSP_DEBUG_CMD_SM_CSM_CRC (0x3 << 10)
+#define SSP_DEBUG_SSP_CMD (1 << 9)
+#define SSP_DEBUG_SSP_RESP (1 << 8)
+#define SSP_DEBUG_SSP_RXD_MASK 0xff
+#define SSP_DEBUG_SSP_RXD_OFFSET 0
+
+#define SSP_VERSION_MAJOR_MASK (0xff << 24)
+#define SSP_VERSION_MAJOR_OFFSET 24
+#define SSP_VERSION_MINOR_MASK (0xff << 16)
+#define SSP_VERSION_MINOR_OFFSET 16
+#define SSP_VERSION_STEP_MASK 0xffff
+#define SSP_VERSION_STEP_OFFSET 0
+
+#endif /* __MX28_REGS_SSP_H__ */
diff --git a/arch/arm/include/asm/arch-mx28/regs-timrot.h b/arch/arm/include/asm/arch-mx28/regs-timrot.h
new file mode 100644
index 0000000..1b941cf
--- /dev/null
+++ b/arch/arm/include/asm/arch-mx28/regs-timrot.h
@@ -0,0 +1,171 @@
+/*
+ * Freescale i.MX28 TIMROT Register Definitions
+ *
+ * Copyright (C) 2011 Marek Vasut <marek.vasut at gmail.com>
+ *
+ * Based on code from LTIB:
+ * Copyright 2008-2010 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#ifndef __MX28_REGS_TIMROT_H__
+#define __MX28_REGS_TIMROT_H__
+
+#include <asm/arch/regs-common.h>
+
+#ifndef __ASSEMBLY__
+struct mx28_timrot_regs {
+ mx28_reg(hw_timrot_rotctrl)
+ mx28_reg(hw_timrot_rotcount)
+ mx28_reg(hw_timrot_timctrl0)
+ mx28_reg(hw_timrot_running_count0)
+ mx28_reg(hw_timrot_fixed_count0)
+ mx28_reg(hw_timrot_match_count0)
+ mx28_reg(hw_timrot_timctrl1)
+ mx28_reg(hw_timrot_running_count1)
+ mx28_reg(hw_timrot_fixed_count1)
+ mx28_reg(hw_timrot_match_count1)
+ mx28_reg(hw_timrot_timctrl2)
+ mx28_reg(hw_timrot_running_count2)
+ mx28_reg(hw_timrot_fixed_count2)
+ mx28_reg(hw_timrot_match_count2)
+ mx28_reg(hw_timrot_timctrl3)
+ mx28_reg(hw_timrot_running_count3)
+ mx28_reg(hw_timrot_fixed_count3)
+ mx28_reg(hw_timrot_match_count3)
+ mx28_reg(hw_timrot_version)
+};
+#endif
+
+#define TIMROT_ROTCTRL_SFTRST (1 << 31)
+#define TIMROT_ROTCTRL_CLKGATE (1 << 30)
+#define TIMROT_ROTCTRL_ROTARY_PRESENT (1 << 29)
+#define TIMROT_ROTCTRL_TIM3_PRESENT (1 << 28)
+#define TIMROT_ROTCTRL_TIM2_PRESENT (1 << 27)
+#define TIMROT_ROTCTRL_TIM1_PRESENT (1 << 26)
+#define TIMROT_ROTCTRL_TIM0_PRESENT (1 << 25)
+#define TIMROT_ROTCTRL_STATE_MASK (0x7 << 22)
+#define TIMROT_ROTCTRL_STATE_OFFSET 22
+#define TIMROT_ROTCTRL_DIVIDER_MASK (0x3f << 16)
+#define TIMROT_ROTCTRL_DIVIDER_OFFSET 16
+#define TIMROT_ROTCTRL_RELATIVE (1 << 12)
+#define TIMROT_ROTCTRL_OVERSAMPLE_MASK (0x3 << 10)
+#define TIMROT_ROTCTRL_OVERSAMPLE_OFFSET 10
+#define TIMROT_ROTCTRL_OVERSAMPLE_8X (0x0 << 10)
+#define TIMROT_ROTCTRL_OVERSAMPLE_4X (0x1 << 10)
+#define TIMROT_ROTCTRL_OVERSAMPLE_2X (0x2 << 10)
+#define TIMROT_ROTCTRL_OVERSAMPLE_1X (0x3 << 10)
+#define TIMROT_ROTCTRL_POLARITY_B (1 << 9)
+#define TIMROT_ROTCTRL_POLARITY_A (1 << 8)
+#define TIMROT_ROTCTRL_SELECT_B_MASK (0xf << 4)
+#define TIMROT_ROTCTRL_SELECT_B_OFFSET 4
+#define TIMROT_ROTCTRL_SELECT_B_NEVER_TICK (0x0 << 4)
+#define TIMROT_ROTCTRL_SELECT_B_PWM0 (0x1 << 4)
+#define TIMROT_ROTCTRL_SELECT_B_PWM1 (0x2 << 4)
+#define TIMROT_ROTCTRL_SELECT_B_PWM2 (0x3 << 4)
+#define TIMROT_ROTCTRL_SELECT_B_PWM3 (0x4 << 4)
+#define TIMROT_ROTCTRL_SELECT_B_PWM4 (0x5 << 4)
+#define TIMROT_ROTCTRL_SELECT_B_PWM5 (0x6 << 4)
+#define TIMROT_ROTCTRL_SELECT_B_PWM6 (0x7 << 4)
+#define TIMROT_ROTCTRL_SELECT_B_PWM7 (0x8 << 4)
+#define TIMROT_ROTCTRL_SELECT_B_ROTARYA (0x9 << 4)
+#define TIMROT_ROTCTRL_SELECT_B_ROTARYB (0xa << 4)
+#define TIMROT_ROTCTRL_SELECT_A_MASK 0xf
+#define TIMROT_ROTCTRL_SELECT_A_OFFSET 0
+#define TIMROT_ROTCTRL_SELECT_A_NEVER_TICK 0x0
+#define TIMROT_ROTCTRL_SELECT_A_PWM0 0x1
+#define TIMROT_ROTCTRL_SELECT_A_PWM1 0x2
+#define TIMROT_ROTCTRL_SELECT_A_PWM2 0x3
+#define TIMROT_ROTCTRL_SELECT_A_PWM3 0x4
+#define TIMROT_ROTCTRL_SELECT_A_PWM4 0x5
+#define TIMROT_ROTCTRL_SELECT_A_PWM5 0x6
+#define TIMROT_ROTCTRL_SELECT_A_PWM6 0x7
+#define TIMROT_ROTCTRL_SELECT_A_PWM7 0x8
+#define TIMROT_ROTCTRL_SELECT_A_ROTARYA 0x9
+#define TIMROT_ROTCTRL_SELECT_A_ROTARYB 0xa
+
+#define TIMROT_ROTCOUNT_UPDOWN_MASK 0xffff
+#define TIMROT_ROTCOUNT_UPDOWN_OFFSET 0
+
+#define TIMROT_TIMCTRLn_IRQ (1 << 15)
+#define TIMROT_TIMCTRLn_IRQ_EN (1 << 14)
+#define TIMROT_TIMCTRLn_MATCH_MODE (1 << 11)
+#define TIMROT_TIMCTRLn_POLARITY (1 << 8)
+#define TIMROT_TIMCTRLn_UPDATE (1 << 7)
+#define TIMROT_TIMCTRLn_RELOAD (1 << 6)
+#define TIMROT_TIMCTRLn_PRESCALE_MASK (0x3 << 4)
+#define TIMROT_TIMCTRLn_PRESCALE_OFFSET 4
+#define TIMROT_TIMCTRLn_PRESCALE_DIV_BY_1 (0x0 << 4)
+#define TIMROT_TIMCTRLn_PRESCALE_DIV_BY_2 (0x1 << 4)
+#define TIMROT_TIMCTRLn_PRESCALE_DIV_BY_4 (0x2 << 4)
+#define TIMROT_TIMCTRLn_PRESCALE_DIV_BY_8 (0x3 << 4)
+#define TIMROT_TIMCTRLn_SELECT_MASK 0xf
+#define TIMROT_TIMCTRLn_SELECT_OFFSET 0
+#define TIMROT_TIMCTRLn_SELECT_NEVER_TICK 0x0
+#define TIMROT_TIMCTRLn_SELECT_PWM0 0x1
+#define TIMROT_TIMCTRLn_SELECT_PWM1 0x2
+#define TIMROT_TIMCTRLn_SELECT_PWM2 0x3
+#define TIMROT_TIMCTRLn_SELECT_PWM3 0x4
+#define TIMROT_TIMCTRLn_SELECT_PWM4 0x5
+#define TIMROT_TIMCTRLn_SELECT_PWM5 0x6
+#define TIMROT_TIMCTRLn_SELECT_PWM6 0x7
+#define TIMROT_TIMCTRLn_SELECT_PWM7 0x8
+#define TIMROT_TIMCTRLn_SELECT_ROTARYA 0x9
+#define TIMROT_TIMCTRLn_SELECT_ROTARYB 0xa
+#define TIMROT_TIMCTRLn_SELECT_32KHZ_XTAL 0xb
+#define TIMROT_TIMCTRLn_SELECT_8KHZ_XTAL 0xc
+#define TIMROT_TIMCTRLn_SELECT_4KHZ_XTAL 0xd
+#define TIMROT_TIMCTRLn_SELECT_1KHZ_XTAL 0xe
+#define TIMROT_TIMCTRLn_SELECT_TICK_ALWAYS 0xf
+
+#define TIMROT_RUNNING_COUNTn_RUNNING_COUNT_MASK 0xffffffff
+#define TIMROT_RUNNING_COUNTn_RUNNING_COUNT_OFFSET 0
+
+#define TIMROT_FIXED_COUNTn_FIXED_COUNT_MASK 0xffffffff
+#define TIMROT_FIXED_COUNTn_FIXED_COUNT_OFFSET 0
+
+#define TIMROT_MATCH_COUNTn_MATCH_COUNT_MASK 0xffffffff
+#define TIMROT_MATCH_COUNTn_MATCH_COUNT_OFFSET 0
+
+#define TIMROT_TIMCTRL3_TEST_SIGNAL_MASK (0xf << 16)
+#define TIMROT_TIMCTRL3_TEST_SIGNAL_OFFSET 16
+#define TIMROT_TIMCTRL3_TEST_SIGNAL_NEVER_TICK (0x0 << 16)
+#define TIMROT_TIMCTRL3_TEST_SIGNAL_PWM0 (0x1 << 16)
+#define TIMROT_TIMCTRL3_TEST_SIGNAL_PWM1 (0x2 << 16)
+#define TIMROT_TIMCTRL3_TEST_SIGNAL_PWM2 (0x3 << 16)
+#define TIMROT_TIMCTRL3_TEST_SIGNAL_PWM3 (0x4 << 16)
+#define TIMROT_TIMCTRL3_TEST_SIGNAL_PWM4 (0x5 << 16)
+#define TIMROT_TIMCTRL3_TEST_SIGNAL_PWM5 (0x6 << 16)
+#define TIMROT_TIMCTRL3_TEST_SIGNAL_PWM6 (0x7 << 16)
+#define TIMROT_TIMCTRL3_TEST_SIGNAL_PWM7 (0x8 << 16)
+#define TIMROT_TIMCTRL3_TEST_SIGNAL_ROTARYA (0x9 << 16)
+#define TIMROT_TIMCTRL3_TEST_SIGNAL_ROTARYB (0xa << 16)
+#define TIMROT_TIMCTRL3_TEST_SIGNAL_32KHZ_XTAL (0xb << 16)
+#define TIMROT_TIMCTRL3_TEST_SIGNAL_8KHZ_XTAL (0xc << 16)
+#define TIMROT_TIMCTRL3_TEST_SIGNAL_4KHZ_XTAL (0xd << 16)
+#define TIMROT_TIMCTRL3_TEST_SIGNAL_1KHZ_XTAL (0xe << 16)
+#define TIMROT_TIMCTRL3_TEST_SIGNAL_TICK_ALWAYS (0xf << 16)
+#define TIMROT_TIMCTRL3_DUTY_CYCLE (1 << 9)
+
+#define TIMROT_VERSION_MAJOR_MASK (0xff << 24)
+#define TIMROT_VERSION_MAJOR_OFFSET 24
+#define TIMROT_VERSION_MINOR_MASK (0xff << 16)
+#define TIMROT_VERSION_MINOR_OFFSET 16
+#define TIMROT_VERSION_STEP_MASK 0xffff
+#define TIMROT_VERSION_STEP_OFFSET 0
+
+#endif /* __MX28_REGS_TIMROT_H__ */
diff --git a/arch/arm/include/asm/arch-mx28/sys_proto.h b/arch/arm/include/asm/arch-mx28/sys_proto.h
new file mode 100644
index 0000000..a262c05
--- /dev/null
+++ b/arch/arm/include/asm/arch-mx28/sys_proto.h
@@ -0,0 +1,30 @@
+/*
+ * Freescale i.MX28 MX28 specific functions
+ *
+ * Copyright (C) 2011 Marek Vasut <marek.vasut at gmail.com>
+ * on behalf of DENX Software Engineering GmbH
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#ifndef __MX28_H__
+#define __MX28_H__
+
+int mx28_reset_block(struct mx28_register *reg);
+int mx28_wait_mask_set(struct mx28_register *reg, uint32_t mask, int timeout);
+int mx28_wait_mask_clr(struct mx28_register *reg, uint32_t mask, int timeout);
+
+#endif /* __MX28_H__ */
--
1.7.7.1
More information about the U-Boot
mailing list