[U-Boot] [PATCH] arm, davinci: make arch_cpu_init() in da850_lowlevel.c weak

[Heiko Schocher]

Hello Christian,

Christian Riesch wrote:
> Hello Heiko,
> 
> On Wed, Nov 9, 2011 at 11:44 AM, Heiko Schocher <hs at denx.de> wrote:
>>> Heiko, Christian: please negotiate who performs which part of the
>>> cleanup. But I expect that with proper symbolic names instead of the
>>> hardwired constants the need for a wek function will go away.
>> I rework this.
> 
> I'd like to help but since we have different custom boards it's a bit
> hard to test. Therefore I'd like to get this lowlevel initialization

Do you plan to post your patches for your custom board to the ML?

> working on the da850evm board. Since it boots from SPI I guess I'll
> need an SPL for SPI flash, right? Could we try to clean it up in a way

Yes.

> so it nicely integrates with your SPL code in
> arch/arm/cpu/arm926ejs/davinci/spl.c?

I soon post the cleanup for the da850_lowlevel.c file, so you can
do this based on that patch. You only have to adapt board_init_f() in
arch/arm/cpu/arm926ejs/davinci/spl.c. There for the da850 case,
arch_cpu_init() or for the spl case better called da850_lowlevel_init()
from arch/arm/cpu/arm926ejs/davinci/da850_lowlevel.c must be called.

bye,
Heiko
-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany