[U-Boot] [PATCH 7/7 v3] integrator: enable Vpp and disable flash protection

Linus Walleij linus.walleij at linaro.org
Wed Nov 9 17:16:37 CET 2011


This enables Vpp and disables the flash protection on the
Integrator when starting U-Boot. The integrator/AP has double
protection mechanisms: this one and the EBI protection bit
(patch earlier), the Integrator/CP has only one line of
protection in these registers.

Signed-off-by: Linus Walleij <linus.walleij at linaro.org>
---
ChangeLog v1->v2:
- Rebased to U-Boot ARM HEAD at Alberts request, see message
  4EA1C8E7.7090105 at aribaud.net
ChangeLog v2->v3:
- Rebased to U-Boot ARM HEAD at Alberts request, see message
  4EB84700.1030109 at aribaud.net
---
 board/armltd/integrator/integrator.c |   20 ++++++++++++++++++++
 1 files changed, 20 insertions(+), 0 deletions(-)

diff --git a/board/armltd/integrator/integrator.c b/board/armltd/integrator/integrator.c
index dd83ca5..a507c09 100644
--- a/board/armltd/integrator/integrator.c
+++ b/board/armltd/integrator/integrator.c
@@ -37,6 +37,7 @@
 #include <netdev.h>
 #include <asm/io.h>
 #include "arm-ebi.h"
+#include "integrator-sc.h"
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -76,7 +77,19 @@ extern void cm_remap(void);
 	cm_remap();	/* remaps writeable memory to 0x00000000 */
 #endif
 
+#ifdef CONFIG_ARCH_CINTEGRATOR
 	/*
+	 * Flash protection on the Integrator/CP is in a simple register
+	 */
+	val = readl(CP_FLASHPROG);
+	val |= (CP_FLASHPROG_FLVPPEN | CP_FLASHPROG_FLWREN);
+	writel(val, CP_FLASHPROG);
+#else
+	/*
+	 * The Integrator/AP has some special protection mechanisms
+	 * for the external memories, first the External Bus Interface (EBI)
+	 * then the system controller (SC).
+	 *
 	 * The system comes up with the flash memory non-writable and
 	 * configuration locked. If we want U-Boot to be used for flash
 	 * access we cannot have the flash memory locked.
@@ -88,6 +101,13 @@ extern void cm_remap(void);
 	writel(val, EBI_BASE + EBI_CSR1_REG);
 	writel(0, EBI_BASE + EBI_LOCK_REG);
 
+	/*
+	 * Set up the system controller to remove write protection from
+	 * the flash memory and enable Vpp
+	 */
+	writel(SC_CTRL_FLASHVPP | SC_CTRL_FLASHWP, SC_CTRLS);
+#endif
+
 	icache_enable ();
 
 	return 0;
-- 
1.7.6.4



More information about the U-Boot mailing list