[U-Boot] [PATCH] usb: increase delay after port reset

[Ilya Yanok]

In our setup (OMAP3 EHCI host, keyboard, mouse mass storage and BT
dongle devices connected via several hubs) keyboard fails to initialize
during the bus scan (stalled endpoint while get_descriptor/64) and after
that keyboard is unusable (even in Linux) until power off/on.

Increasing the delay after port reset from 200ms to 260ms solves this
problem.

Signed-off-by: Ilya Yanok <yanok at emcraft.com>
---
 common/usb.c |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)

diff --git a/common/usb.c b/common/usb.c
index bed5116..5e282c6 100644
--- a/common/usb.c
+++ b/common/usb.c
@@ -1147,7 +1147,7 @@ void usb_hub_port_connect_change(struct usb_device *dev, int port)
 		return;
 	}
 
-	wait_ms(200);
+	wait_ms(260);
 
 	/* Allocate a new device struct for it */
 	usb = usb_alloc_new_device();
-- 
1.7.6.4