[U-Boot] [PATCH 2/2] arm, davinci: da850/dm365 lowlevel cleanup
Heiko Schocher
hs at denx.de
Thu Nov 10 07:06:24 CET 2011
- Cleanup a lot of fix values, and use defines instead.
- Also make some values configurable through the board config
file.
- delete the NAND_SPL code for da850, as it is not used actually
- remove the asm code
Signed-off-by: Heiko Schocher <hs at denx.de>
Cc: Wolfgang Denk <hs at denx.de>
Cc: Sandeep Paulraj <s-paulraj at ti.com>
Cc: Albert ARIBAUD <albert.u.boot at aribaud.net>
Cc: Tom Rini <tom.rini at gmail.com>
Cc: Christian Riesch <christian.riesch at omicron.at>
---
arch/arm/cpu/arm926ejs/davinci/da850_lowlevel.c | 122 +++++++-------------
arch/arm/cpu/arm926ejs/davinci/dm365_lowlevel.c | 73 +++++-------
arch/arm/include/asm/arch-davinci/aintc_defs.h | 2 +
arch/arm/include/asm/arch-davinci/da850_lowlevel.h | 2 +-
arch/arm/include/asm/arch-davinci/ddr2_defs.h | 4 +
arch/arm/include/asm/arch-davinci/emif_defs.h | 1 +
arch/arm/include/asm/arch-davinci/hardware.h | 20 +++
arch/arm/include/asm/arch-davinci/pll_defs.h | 14 +++
8 files changed, 113 insertions(+), 125 deletions(-)
diff --git a/arch/arm/cpu/arm926ejs/davinci/da850_lowlevel.c b/arch/arm/cpu/arm926ejs/davinci/da850_lowlevel.c
index 327ff97..c7ec70f 100644
--- a/arch/arm/cpu/arm926ejs/davinci/da850_lowlevel.c
+++ b/arch/arm/cpu/arm926ejs/davinci/da850_lowlevel.c
@@ -29,6 +29,7 @@
#include <asm/arch/hardware.h>
#include <asm/arch/ddr2_defs.h>
#include <asm/arch/emif_defs.h>
+#include <asm/arch/pll_defs.h>
void da850_waitloop(unsigned long loopcnt)
{
@@ -42,18 +43,18 @@ int da850_pll_init(struct davinci_pllc_regs *reg, unsigned long pllmult)
{
if (reg == davinci_pllc0_regs)
/* Unlock PLL registers. */
- clrbits_le32(&davinci_syscfg_regs->cfgchip0, 0x00000010);
+ clrbits_le32(&davinci_syscfg_regs->cfgchip0, PLL_MASTER_LOCK);
/*
* Set PLLENSRC '0',bit 5, PLL Enable(PLLEN) selection is controlled
* through MMR
*/
- clrbits_le32(®->pllctl, 0x00000020);
+ clrbits_le32(®->pllctl, PLLCTL_PLLENSRC);
/* PLLCTL.EXTCLKSRC bit 9 should be left at 0 for Freon */
- clrbits_le32(®->pllctl, 0x00000200);
+ clrbits_le32(®->pllctl, PLLCTL_EXTCLKSRC);
/* Set PLLEN=0 => PLL BYPASS MODE */
- clrbits_le32(®->pllctl, 0x00000001);
+ clrbits_le32(®->pllctl, PLLCTL_PLLEN);
da850_waitloop(150);
@@ -62,42 +63,43 @@ int da850_pll_init(struct davinci_pllc_regs *reg, unsigned long pllmult)
* Select the Clock Mode bit 8 as External Clock or On Chip
* Oscilator
*/
- dv_maskbits(®->pllctl, 0xFFFFFEFF);
- setbits_le32(®->pllctl, (CONFIG_SYS_DV_CLKMODE << 8));
+ dv_maskbits(®->pllctl, ~PLLCTL_RES_9);
+ setbits_le32(®->pllctl,
+ (CONFIG_SYS_DV_CLKMODE << PLLCTL_CLOCK_MODE_SHIFT));
}
/* Clear PLLRST bit to reset the PLL */
- clrbits_le32(®->pllctl, 0x00000008);
+ clrbits_le32(®->pllctl, PLLCTL_PLLRST);
/* Disable the PLL output */
- setbits_le32(®->pllctl, 0x00000010);
+ setbits_le32(®->pllctl, PLLCTL_PLLDIS);
/* PLL initialization sequence */
/*
* Power up the PLL- PWRDN bit set to 0 to bring the PLL out of
* power down bit
*/
- clrbits_le32(®->pllctl, 0x00000002);
+ clrbits_le32(®->pllctl, PLLCTL_PLLPWRDN);
/* Enable the PLL from Disable Mode PLLDIS bit to 0 */
- clrbits_le32(®->pllctl, 0x00000010);
+ clrbits_le32(®->pllctl, PLLCTL_PLLDIS);
/* Program the required multiplier value in PLLM */
writel(pllmult, ®->pllm);
/* program the postdiv */
if (reg == davinci_pllc0_regs)
- writel((0x8000 | CONFIG_SYS_DA850_PLL0_POSTDIV),
+ writel((PLL_POSTDEN | CONFIG_SYS_DA850_PLL0_POSTDIV),
®->postdiv);
else
- writel((0x8000 | CONFIG_SYS_DA850_PLL1_POSTDIV),
+ writel((PLL_POSTDEN | CONFIG_SYS_DA850_PLL1_POSTDIV),
®->postdiv);
/*
* Check for the GOSTAT bit in PLLSTAT to clear to 0 to indicate that
* no GO operation is currently in progress
*/
- while ((readl(®->pllstat) & 0x1) == 1)
+ while ((readl(®->pllstat) & PLLCMD_GOSTAT) == PLLCMD_GOSTAT)
;
if (reg == davinci_pllc0_regs) {
@@ -118,20 +120,20 @@ int da850_pll_init(struct davinci_pllc_regs *reg, unsigned long pllmult)
* Set the GOSET bit in PLLCMD to 1 to initiate a new divider
* transition.
*/
- setbits_le32(®->pllcmd, 0x01);
+ setbits_le32(®->pllcmd, PLLCMD_GOSTAT);
/*
* Wait for the GOSTAT bit in PLLSTAT to clear to 0
* (completion of phase alignment).
*/
- while ((readl(®->pllstat) & 0x1) == 1)
+ while ((readl(®->pllstat) & PLLCMD_GOSTAT) == PLLCMD_GOSTAT)
;
/* Wait for PLL to reset properly. See PLL spec for PLL reset time */
da850_waitloop(200);
/* Set the PLLRST bit in PLLCTL to 1 to bring the PLL out of reset */
- setbits_le32(®->pllctl, 0x00000008);
+ setbits_le32(®->pllctl, PLLCTL_PLLRST);
/* Wait for PLL to lock. See PLL spec for PLL lock time */
da850_waitloop(2400);
@@ -140,7 +142,7 @@ int da850_pll_init(struct davinci_pllc_regs *reg, unsigned long pllmult)
* Set the PLLEN bit in PLLCTL to 1 to remove the PLL from bypass
* mode
*/
- setbits_le32(®->pllctl, 0x00000001);
+ setbits_le32(®->pllctl, PLLCTL_PLLEN);
/*
@@ -148,12 +150,13 @@ int da850_pll_init(struct davinci_pllc_regs *reg, unsigned long pllmult)
* run off SYSCLK
*/
if (reg == davinci_pllc0_regs)
- dv_maskbits(&davinci_syscfg_regs->cfgchip3, 0xFFFFFFF8);
+ dv_maskbits(&davinci_syscfg_regs->cfgchip3,
+ ~(PLL_SCSCFG3_DIV45PENA | PLL_SCSCFG3_EMA_CLKSRC));
return 0;
}
-int da850_ddr_setup(unsigned int freq)
+int da850_ddr_setup(void)
{
unsigned long tmp;
@@ -197,8 +200,8 @@ int da850_ddr_setup(unsigned int freq)
* the timing registers
*/
tmp = CONFIG_SYS_DA850_DDR2_SDBCR;
- tmp &= ~(0x1 << DV_DDR_SDCR_BOOTUNLOCK_SHIFT);
- tmp |= (0x1 << DV_DDR_SDCR_TIMUNLOCK_SHIFT);
+ tmp &= ~DV_DDR_BOOTUNLOCK;
+ tmp |= DV_DDR_TIMUNLOCK;
writel(tmp, &dv_ddr2_regs_ctrl->sdbcr);
/* write memory configuration and timing */
@@ -207,7 +210,7 @@ int da850_ddr_setup(unsigned int freq)
writel(CONFIG_SYS_DA850_DDR2_SDTIMR2, &dv_ddr2_regs_ctrl->sdtimr2);
/* clear the TIMUNLOCK bit and write the value of the CL field */
- tmp &= ~(0x1 << DV_DDR_SDCR_TIMUNLOCK_SHIFT);
+ tmp &= ~DV_DDR_TIMUNLOCK;
writel(tmp, &dv_ddr2_regs_ctrl->sdbcr);
/*
@@ -225,8 +228,9 @@ int da850_ddr_setup(unsigned int freq)
lpsc_on(DAVINCI_LPSC_DDR_EMIF);
/* disable self refresh */
- clrbits_le32(&dv_ddr2_regs_ctrl->sdrcr, 0xc0000000);
- writel(0x30, &dv_ddr2_regs_ctrl->pbbpr);
+ clrbits_le32(&dv_ddr2_regs_ctrl->sdrcr,
+ DV_DDR_SDRCR_LPMODEN | DV_DDR_SDRCR_LPMODEN);
+ writel(CONFIG_SYS_DA850_DDR2_PBBPR, &dv_ddr2_regs_ctrl->pbbpr);
return 0;
}
@@ -244,57 +248,14 @@ void board_gpio_init(void)
return;
}
-#if defined(CONFIG_NAND_SPL)
-void nand_boot(void)
-{
- __attribute__((noreturn)) void (*uboot)(void);
-
- /* copy image from NOR to RAM */
- memcpy((void *)CONFIG_SYS_NAND_U_BOOT_DST,
- (void *)CONFIG_SYS_NAND_U_BOOT_OFFS,
- CONFIG_SYS_NAND_U_BOOT_SIZE);
-
- /* and jump to it ... */
- uboot = (void *)CONFIG_SYS_NAND_U_BOOT_START;
- (*uboot)();
-}
-#endif
-
-#if defined(CONFIG_NAND_SPL)
-void board_init_f(ulong bootflag)
-#else
int arch_cpu_init(void)
-#endif
{
- /*
- * copied from arch/arm/cpu/arm926ejs/start.S
- *
- * flush v4 I/D caches
- */
- asm("mov r0, #0");
- asm("mcr p15, 0, r0, c7, c7, 0"); /* flush v3/v4 cache */
- asm("mcr p15, 0, r0, c8, c7, 0"); /* flush v4 TLB */
-
- /*
- * disable MMU stuff and caches
- */
- asm("mrc p15, 0, r0, c1, c0, 0");
- /* clear bits 13, 9:8 (--V- --RS) */
- asm("bic r0, r0, #0x00002300");
- /* clear bits 7, 2:0 (B--- -CAM) */
- asm("bic r0, r0, #0x00000087");
- /* set bit 2 (A) Align */
- asm("orr r0, r0, #0x00000002");
- /* set bit 12 (I) I-Cache */
- asm("orr r0, r0, #0x00001000");
- asm("mcr p15, 0, r0, c1, c0, 0");
-
/* Unlock kick registers */
- writel(0x83e70b13, &davinci_syscfg_regs->kick0);
- writel(0x95a4f1e0, &davinci_syscfg_regs->kick1);
+ writel(DV_SYSCFG_KICK0_UNLOCK, &davinci_syscfg_regs->kick0);
+ writel(DV_SYSCFG_KICK1_UNLOCK, &davinci_syscfg_regs->kick1);
dv_maskbits(&davinci_syscfg_regs->suspsrc,
- ((1 << 27) | (1 << 22) | (1 << 20) | (1 << 5) | (1 << 16)));
+ CONFIG_SYS_DA850_SYSCFG_SUSPSRC);
/* Setup Pinmux */
da850_pinmux_ctl(0, 0xFFFFFFFF, CONFIG_SYS_DA850_PINMUX0);
@@ -326,10 +287,14 @@ int arch_cpu_init(void)
board_gpio_init();
/* setup CSn config */
+#if defined(CONFIG_SYS_DA850_CS2CFG)
writel(CONFIG_SYS_DA850_CS2CFG, &davinci_emif_regs->ab1cr);
+#endif
+#if defined(CONFIG_SYS_DA850_CS3CFG)
writel(CONFIG_SYS_DA850_CS3CFG, &davinci_emif_regs->ab2cr);
+#endif
- lpsc_on(DAVINCI_LPSC_UART2);
+ lpsc_on(CONFIG_SYS_DA850_LPSC_UART);
NS16550_init((NS16550_t)(CONFIG_SYS_NS16550_COM1),
CONFIG_SYS_NS16550_CLK / 16 / CONFIG_BAUDRATE);
@@ -337,17 +302,10 @@ int arch_cpu_init(void)
* Fix Power and Emulation Management Register
* see sprufw3a.pdf page 37 Table 24
*/
- writel(readl((CONFIG_SYS_NS16550_COM1 + 0x30)) | 0x00006001,
- (CONFIG_SYS_NS16550_COM1 + 0x30));
-#if defined(CONFIG_NAND_SPL)
- puts("ddr init\n");
- da850_ddr_setup(132);
+ writel((DAVINCI_UART_PWREMU_MGMT_FREE | DAVINCI_UART_PWREMU_MGMT_URRST |
+ DAVINCI_UART_PWREMU_MGMT_UTRST),
+ &davinci_uart2_ctrl_regs->pwremu_mgmt);
- puts("boot u-boot ...\n");
-
- nand_boot();
-#else
- da850_ddr_setup(132);
+ da850_ddr_setup();
return 0;
-#endif
}
diff --git a/arch/arm/cpu/arm926ejs/davinci/dm365_lowlevel.c b/arch/arm/cpu/arm926ejs/davinci/dm365_lowlevel.c
index 3772e64..6e998de 100644
--- a/arch/arm/cpu/arm926ejs/davinci/dm365_lowlevel.c
+++ b/arch/arm/cpu/arm926ejs/davinci/dm365_lowlevel.c
@@ -45,7 +45,8 @@ int dm365_pll1_init(unsigned long pllmult, unsigned long prediv)
clrbits_le32(&dv_pll0_regs->pllctl, PLLCTL_PLLPWRDN);
clrbits_le32(&dv_pll0_regs->pllctl, PLLCTL_RES_9);
- setbits_le32(&dv_pll0_regs->pllctl, clksrc << 8);
+ setbits_le32(&dv_pll0_regs->pllctl,
+ clksrc << PLLCTL_CLOCK_MODE_SHIFT);
/*
* Set PLLENSRC '0', PLL Enable(PLLEN) selection is controlled
@@ -82,7 +83,7 @@ int dm365_pll1_init(unsigned long pllmult, unsigned long prediv)
writel(PLLSECCTL_STOPMODE | PLLSECCTL_TINITZ, &dv_pll0_regs->secctl);
/* Program the PostDiv for PLL1 */
- writel(0x8000, &dv_pll0_regs->postdiv);
+ writel(PLL_POSTDEN, &dv_pll0_regs->postdiv);
/* Post divider setting for PLL1 */
writel(CONFIG_SYS_DM36x_PLL1_PLLDIV1, &dv_pll0_regs->plldiv1);
@@ -126,7 +127,8 @@ int dm365_pll2_init(unsigned long pllm, unsigned long prediv)
* VDB has input on MXI pin
*/
clrbits_le32(&dv_pll1_regs->pllctl, PLLCTL_RES_9);
- setbits_le32(&dv_pll1_regs->pllctl, clksrc << 8);
+ setbits_le32(&dv_pll1_regs->pllctl,
+ clksrc << PLLCTL_CLOCK_MODE_SHIFT);
/*
* Set PLLENSRC '0', PLL Enable(PLLEN) selection is controlled
@@ -151,7 +153,7 @@ int dm365_pll2_init(unsigned long pllm, unsigned long prediv)
writel(pllm, &dv_pll1_regs->pllm);
writel(prediv, &dv_pll1_regs->prediv);
- writel(0x8000, &dv_pll1_regs->postdiv);
+ writel(PLL_POSTDEN, &dv_pll1_regs->postdiv);
/* Assert TENABLE = 1, TENABLEDIV = 1, TINITZ = 1 */
writel(PLLSECCTL_STOPMODE | PLLSECCTL_TENABLEDIV | PLLSECCTL_TENABLE |
@@ -261,21 +263,23 @@ void dm365_vpss_sync_reset(void)
VPSS_CLK_CTL_VPSS_CLKMD);
/* LPSC SyncReset DDR Clock Enable */
- writel(((readl(&dv_psc_regs->mdctl[47]) & ~PSC_MD_STATE_MSK) |
- PSC_SYNCRESET), &dv_psc_regs->mdctl[47]);
+ writel(((readl(&dv_psc_regs->mdctl[DAVINCI_LPSC_VPSSMASTER]) &
+ ~PSC_MD_STATE_MSK) | PSC_SYNCRESET),
+ &dv_psc_regs->mdctl[DAVINCI_LPSC_VPSSMASTER]);
writel((1 << PdNum), &dv_psc_regs->ptcmd);
while (!(((readl(&dv_psc_regs->ptstat) >> PdNum) & PSC_GOSTAT) == 0))
;
- while (!((readl(&dv_psc_regs->mdstat[47]) & PSC_MD_STATE_MSK) ==
- PSC_SYNCRESET))
+ while (!((readl(&dv_psc_regs->mdstat[DAVINCI_LPSC_VPSSMASTER]) &
+ PSC_MD_STATE_MSK) == PSC_SYNCRESET))
;
}
void dm365_por_reset(void)
{
- if (readl(&dv_pll0_regs->rstype) & 3)
+ if (readl(&dv_pll0_regs->rstype) &
+ (PLL_RSTYPE_POR | PLL_RSTYPE_XWRST))
dm365_vpss_sync_reset();
}
@@ -291,19 +295,20 @@ void dm365_psc_init(void)
for (lpscgroup = lpscmin; lpscgroup <= lpscmax; lpscgroup++) {
if (lpscgroup == 0) {
- lpsc_start = 0; /* Enabling LPSC 3 to 28 SCR first */
- lpsc_end = 28;
+ /* Enabling LPSC 3 to 28 SCR first */
+ lpsc_start = DAVINCI_LPSC_VPSSMSTR;
+ lpsc_end = DAVINCI_LPSC_TIMER1;
} else if (lpscgroup == 1) { /* Skip locked LPSCs [29-37] */
- lpsc_start = 38;
- lpsc_end = 47;
+ lpsc_start = DAVINCI_LPSC_CFG5;
+ lpsc_end = DAVINCI_LPSC_VPSSMASTER;
} else {
- lpsc_start = 50;
- lpsc_end = 51;
+ lpsc_start = DAVINCI_LPSC_MJCP;
+ lpsc_end = DAVINCI_LPSC_HDVICP;
}
/* NEXT=0x3, Enable LPSC's */
for (i = lpsc_start; i <= lpsc_end; i++)
- setbits_le32(&dv_psc_regs->mdctl[i], 0x3);
+ setbits_le32(&dv_psc_regs->mdctl[i], PSC_ENABLE);
/*
* Program goctl to start transition sequence for LPSCs
@@ -322,7 +327,7 @@ void dm365_psc_init(void)
/* Wait for MODSTAT = ENABLE from LPSC's */
for (i = lpsc_start; i <= lpsc_end; i++)
while (!((readl(&dv_psc_regs->mdstat[i]) &
- PSC_MD_STATE_MSK) == 0x3))
+ PSC_MD_STATE_MSK) == PSC_ENABLE))
;
}
}
@@ -332,7 +337,7 @@ static void dm365_emif_init(void)
writel(CONFIG_SYS_DM36x_AWCCR, &davinci_emif_regs->awccr);
writel(CONFIG_SYS_DM36x_AB1CR, &davinci_emif_regs->ab1cr);
- setbits_le32(&davinci_emif_regs->nandfcr, 1);
+ setbits_le32(&davinci_emif_regs->nandfcr, DAVINCI_NANDFCR_CS2NAND);
writel(CONFIG_SYS_DM36x_AB2CR, &davinci_emif_regs->ab2cr);
@@ -361,31 +366,12 @@ int post_log(char *format, ...)
void dm36x_lowlevel_init(ulong bootflag)
{
- /*
- * copied from arch/arm/cpu/arm926ejs/start.S
- *
- * flush v4 I/D caches
- */
- asm("mov r0, #0");
- asm("mcr p15, 0, r0, c7, c7, 0"); /* flush v3/v4 cache */
- asm("mcr p15, 0, r0, c8, c7, 0"); /* flush v4 TLB */
-
- /*
- * disable MMU stuff and caches
- */
- asm("mrc p15, 0, r0, c1, c0, 0");
- /* clear bits 13, 9:8 (--V- --RS) */
- asm("bic r0, r0, #0x00002300");
- /* clear bits 7, 2:0 (B--- -CAM) */
- asm("bic r0, r0, #0x00000087");
- /* set bit 2 (A) Align */
- asm("orr r0, r0, #0x00000002");
- /* set bit 12 (I) I-Cache */
- asm("orr r0, r0, #0x00001000");
- asm("mcr p15, 0, r0, c1, c0, 0");
+ struct davinci_uart_ctrl_regs *davinci_uart_ctrl_regs =
+ (struct davinci_uart_ctrl_regs *)(CONFIG_SYS_NS16550_COM1 +
+ DAVINCI_UART_CTRL_BASE);
/* Mask all interrupts */
- writel(0x04, &dv_aintc_regs->intctl);
+ writel(DV_AINTC_INTCTL_IDMODE, &dv_aintc_regs->intctl);
writel(0x0, &dv_aintc_regs->eabase);
writel(0x0, &dv_aintc_regs->eint0);
writel(0x0, &dv_aintc_regs->eint1);
@@ -422,7 +408,10 @@ void dm36x_lowlevel_init(ulong bootflag)
* Fix Power and Emulation Management Register
* see sprufh2.pdf page 38 Table 22
*/
- writel(0x0000e003, (CONFIG_SYS_NS16550_COM1 + 0x30));
+ writel((DAVINCI_UART_PWREMU_MGMT_FREE | DAVINCI_UART_PWREMU_MGMT_URRST |
+ DAVINCI_UART_PWREMU_MGMT_UTRST),
+ &davinci_uart_ctrl_regs->pwremu_mgmt);
+
puts("ddr init\n");
dm365_ddr_setup();
diff --git a/arch/arm/include/asm/arch-davinci/aintc_defs.h b/arch/arm/include/asm/arch-davinci/aintc_defs.h
index 8f37053..38f814c 100644
--- a/arch/arm/include/asm/arch-davinci/aintc_defs.h
+++ b/arch/arm/include/asm/arch-davinci/aintc_defs.h
@@ -47,4 +47,6 @@ struct dv_aintc_regs {
#define dv_aintc_regs ((struct dv_aintc_regs *)DAVINCI_ARM_INTC_BASE)
+#define DV_AINTC_INTCTL_IDMODE (1 << 2)
+
#endif /* _DV_AINTC_DEFS_H_ */
diff --git a/arch/arm/include/asm/arch-davinci/da850_lowlevel.h b/arch/arm/include/asm/arch-davinci/da850_lowlevel.h
index 22a92a3..e489c47 100644
--- a/arch/arm/include/asm/arch-davinci/da850_lowlevel.h
+++ b/arch/arm/include/asm/arch-davinci/da850_lowlevel.h
@@ -36,7 +36,7 @@ void da850_waitloop(unsigned long loopcnt);
int da850_pll_init(struct davinci_pllc_regs *reg, unsigned long pllmult);
void da850_lpc_transition(unsigned char pscnum, unsigned char module,
unsigned char domain, unsigned char state);
-int da850_ddr_setup(unsigned int freq);
+int da850_ddr_setup(void);
void da850_psc_init(void);
void da850_pinmux_ctl(unsigned long offset, unsigned long mask,
unsigned long value);
diff --git a/arch/arm/include/asm/arch-davinci/ddr2_defs.h b/arch/arm/include/asm/arch-davinci/ddr2_defs.h
index 1b9430c..4f943b8 100644
--- a/arch/arm/include/asm/arch-davinci/ddr2_defs.h
+++ b/arch/arm/include/asm/arch-davinci/ddr2_defs.h
@@ -63,6 +63,7 @@ struct dv_ddr2_regs_ctrl {
#define DV_DDR_SDTMR2_RASMAX_SHIFT 27
#define DV_DDR_SDTMR2_XP_SHIFT 25
+#define DV_DDR_SDTMR2_ODT_SHIFT 23
#define DV_DDR_SDTMR2_XSNR_SHIFT 16
#define DV_DDR_SDTMR2_XSRD_SHIFT 8
#define DV_DDR_SDTMR2_RTP_SHIFT 5
@@ -84,6 +85,9 @@ struct dv_ddr2_regs_ctrl {
#define DV_DDR_SDCR_IBANK_SHIFT 4
#define DV_DDR_SDCR_PAGESIZE_SHIFT 0
+#define DV_DDR_SDRCR_LPMODEN (1 << 31)
+#define DV_DDR_SDRCR_MCLKSTOPEN (1 << 30)
+
#define DV_DDR_SRCR_LPMODEN_SHIFT 31
#define DV_DDR_SRCR_MCLKSTOPEN_SHIFT 30
diff --git a/arch/arm/include/asm/arch-davinci/emif_defs.h b/arch/arm/include/asm/arch-davinci/emif_defs.h
index b48ec17..b9e78a5 100644
--- a/arch/arm/include/asm/arch-davinci/emif_defs.h
+++ b/arch/arm/include/asm/arch-davinci/emif_defs.h
@@ -70,6 +70,7 @@ struct davinci_emif_regs {
#define DAVINCI_NANDFCR_1BIT_ECC_START(n) (1 << (8 + (n-2)))
#define DAVINCI_NANDFCR_4BIT_ECC_START (1 << 12)
#define DAVINCI_NANDFCR_4BIT_CALC_START (1 << 13)
+#define DAVINCI_NANDFCR_CS2NAND (1 << 0)
/* Chip Select setup */
#define DAVINCI_ABCR_STROBE_SELECT (1 << 31)
diff --git a/arch/arm/include/asm/arch-davinci/hardware.h b/arch/arm/include/asm/arch-davinci/hardware.h
index ee8fd43..f80f312 100644
--- a/arch/arm/include/asm/arch-davinci/hardware.h
+++ b/arch/arm/include/asm/arch-davinci/hardware.h
@@ -230,6 +230,9 @@ typedef volatile unsigned int * dv_reg_p;
#define DAVINCI_LPSC_CFG5 38
#define DAVINCI_LPSC_GEM 39
#define DAVINCI_LPSC_IMCOP 40
+#define DAVINCI_LPSC_VPSSMASTER 47
+#define DAVINCI_LPSC_MJCP 50
+#define DAVINCI_LPSC_HDVICP 51
#define DAVINCI_DM646X_LPSC_EMAC 14
#define DAVINCI_DM646X_LPSC_UART0 26
@@ -385,6 +388,20 @@ struct davinci_psc_regs {
#define PINMUX3 0x01c4000c
#define PINMUX4 0x01c40010
+struct davinci_uart_ctrl_regs {
+ dv_reg revid1;
+ dv_reg res;
+ dv_reg pwremu_mgmt;
+ dv_reg mdr;
+};
+
+#define DAVINCI_UART_CTRL_BASE 0x28
+
+/* UART PWREMU_MGMT definitions */
+#define DAVINCI_UART_PWREMU_MGMT_FREE (1 << 0)
+#define DAVINCI_UART_PWREMU_MGMT_URRST (1 << 13)
+#define DAVINCI_UART_PWREMU_MGMT_UTRST (1 << 14)
+
#else /* CONFIG_SOC_DA8XX */
struct davinci_pllc_regs {
@@ -492,6 +509,9 @@ struct davinci_syscfg1_regs {
#define VTP_READY (1 << 15)
#define VTP_IOPWRDWN (1 << 14)
+#define DV_SYSCFG_KICK0_UNLOCK 0x83e70b13
+#define DV_SYSCFG_KICK1_UNLOCK 0x95a4f1e0
+
/* Interrupt controller */
struct davinci_aintc_regs {
dv_reg revid;
diff --git a/arch/arm/include/asm/arch-davinci/pll_defs.h b/arch/arm/include/asm/arch-davinci/pll_defs.h
index 5c30953..f1396e3 100644
--- a/arch/arm/include/asm/arch-davinci/pll_defs.h
+++ b/arch/arm/include/asm/arch-davinci/pll_defs.h
@@ -57,11 +57,24 @@ struct dv_pll_regs {
unsigned int plldiv9; /* 0x174 */
};
+#define PLL_MASTER_LOCK (1 << 4)
+
+#define PLLCTL_CLOCK_MODE_SHIFT 8
#define PLLCTL_PLLEN (1 << 0)
#define PLLCTL_PLLPWRDN (1 << 1)
#define PLLCTL_PLLRST (1 << 3)
+#define PLLCTL_PLLDIS (1 << 4)
#define PLLCTL_PLLENSRC (1 << 5)
#define PLLCTL_RES_9 (1 << 8)
+#define PLLCTL_EXTCLKSRC (1 << 9)
+
+#define PLL_POSTDEN (1 << 15)
+
+#define PLL_SCSCFG3_DIV45PENA (1 << 2)
+#define PLL_SCSCFG3_EMA_CLKSRC (1 << 1)
+
+#define PLL_RSTYPE_POR (1 << 0)
+#define PLL_RSTYPE_XWRST (1 << 1)
#define PLLSECCTL_TINITZ (1 << 16)
#define PLLSECCTL_TENABLE (1 << 17)
@@ -69,6 +82,7 @@ struct dv_pll_regs {
#define PLLSECCTL_STOPMODE (1 << 22)
#define PLLCMD_GOSET (1 << 0)
+#define PLLCMD_GOSTAT (1 << 0)
#define PLL0_LOCK 0x07000000
#define PLL1_LOCK 0x07000000
--
1.7.6.4
More information about the U-Boot
mailing list