[U-Boot] [PATCH v2] arm:exynos4:samsung:nuri Support for NURI target.

Lukasz Majewski l.majewski at samsung.com
Thu Nov 10 09:39:31 CET 2011


This patch adds support for Samsung's Exynos4 Nuri reference
board.

New exynos4_nuri board has been added to boards.cfg

Signed-off-by: Lukasz Majewski <l.majewski at samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park at samsung.com>
Cc: Minkyu Kang <mk7.kang at samsung.com>
---
Changes for v2:
        - MAINTAINERS file updated
        - CONFIG_MACH_TYPE added
        - hw_revision routine rewritten

 tools/checkpatch.pl -	
total: 0 errors, 0 warnings, 869 lines checked

NOTE: Ignored message types: COMPLEX_MACRO CONSIDER_KSTRTO MINMAX MULTISTATEMENT_MACRO_USE_DO_WHILE

---
 MAINTAINERS                        |    4 +
 board/samsung/nuri/Makefile        |   45 ++++
 board/samsung/nuri/lowlevel_init.S |  395 ++++++++++++++++++++++++++++++++++++
 board/samsung/nuri/nuri.c          |  202 ++++++++++++++++++
 boards.cfg                         |    1 +
 include/configs/exynos4_nuri.h     |  210 +++++++++++++++++++
 6 files changed, 857 insertions(+), 0 deletions(-)
 create mode 100644 board/samsung/nuri/Makefile
 create mode 100644 board/samsung/nuri/lowlevel_init.S
 create mode 100644 board/samsung/nuri/nuri.c
 create mode 100644 include/configs/exynos4_nuri.h

diff --git a/MAINTAINERS b/MAINTAINERS
index 576fea8..de2bcc0 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -686,6 +686,10 @@ Minkyu Kang <mk7.kang at samsung.com>
 	s5p_goni		ARM ARMV7 (S5PC110 SoC)
 	s5pc210_universal	ARM ARMV7 (S5PC210 SoC)
 
+Łukasz Majewski <l.majewski at samsung.com>
+
+	exynos4_nuri		ARM ARMV7 (S5PC210 SoC)
+
 Chander Kashyap <k.chander at samsung.com>
 
 	origen			ARM ARMV7 (S5PC210 SoC)
diff --git a/board/samsung/nuri/Makefile b/board/samsung/nuri/Makefile
new file mode 100644
index 0000000..27566de
--- /dev/null
+++ b/board/samsung/nuri/Makefile
@@ -0,0 +1,45 @@
+#
+# Copyright (C) 2010 Samsung Electronics
+# Minkyu Kang <mk7.kang at samsung.com>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= $(obj)lib$(BOARD).o
+
+COBJS-y	:= nuri.o
+SOBJS	:= lowlevel_init.o
+
+SRCS    := $(SOBJS:.o=.S) $(COBJS-y:.o=.c)
+OBJS	:= $(addprefix $(obj),$(COBJS-y))
+SOBJS	:= $(addprefix $(obj),$(SOBJS))
+
+$(LIB):	$(obj).depend $(SOBJS) $(OBJS)
+	$(call cmd_link_o_target, $(SOBJS) $(OBJS))
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/samsung/nuri/lowlevel_init.S b/board/samsung/nuri/lowlevel_init.S
new file mode 100644
index 0000000..67635bb
--- /dev/null
+++ b/board/samsung/nuri/lowlevel_init.S
@@ -0,0 +1,395 @@
+/*
+ * Lowlevel setup for universal board based on S5PC210
+ *
+ * Copyright (C) 2010 Samsung Electronics
+ * Kyungmin Park <kyungmin.park at samsung.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+#include <version.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/clock.h>
+
+/*
+ * Register usages:
+ *
+ * r5 has zero always
+ * r7 has GPIO part1 base 0x11400000
+ * r6 has GPIO part2 base 0x11000000
+ */
+
+	.globl lowlevel_init
+lowlevel_init:
+	mov	r11, lr
+
+	/* r5 has always zero */
+	mov	r5, #0
+
+	ldr	r7, =S5PC210_GPIO_PART1_BASE
+	ldr	r6, =S5PC210_GPIO_PART2_BASE
+
+	/* System Timer */
+	ldr	r0, =S5PC210_SYSTIMER_BASE
+	ldr	r1, =0x5000
+	str	r1, [r0, #0x0]
+	ldr	r1, =0xffffffff
+	str	r1, [r0, #0x8]
+	ldr	r1, =0x49
+	str	r1, [r0, #0x4]
+
+	/* PMIC manual reset */
+	/* nPOWER: XEINT_23: GPX2[7] */
+	add	r0, r6, #0xC40			@ S5PC210_GPIO_X2_OFFSET
+	ldr	r1, [r0, #0x0]
+	bic	r1, r1, #(0xf << 28)		@ 28 = 7 * 4-bit
+	orr	r1, r1, #(0x1 << 28)		@ Output
+	str	r1, [r0, #0x0]
+
+	ldr	r1, [r0, #0x4]
+	orr	r1, r1, #(1 << 7)		@ 7 = 7 * 1-bit
+	str	r1, [r0, #0x4]
+
+	/* init system clock */
+	bl	system_clock_init
+
+	/* Disable Watchdog */
+	ldr	r0, =S5PC210_WATCHDOG_BASE		@0x10060000
+	str	r5, [r0]
+
+	/* UART */
+	bl	uart_asm_init
+
+	/* PMU init */
+	bl	system_power_init
+
+	bl	tzpc_init
+
+	mov	lr, r11
+	mov	pc, lr
+	nop
+	nop
+	nop
+
+/*
+ * uart_asm_init: Initialize UART's pins
+ */
+uart_asm_init:
+	/*
+	 * setup UART0-UART4 GPIOs (part1)
+	 * GPA1CON[3] = I2C_3_SCL (3)
+	 * GPA1CON[2] = I2C_3_SDA (3)
+	 */
+	mov	r0, r7
+	ldr	r1, =0x22222222
+	str	r1, [r0, #0x00]			@ S5PC210_GPIO_A0_OFFSET
+	ldr	r1, =0x00223322
+	str	r1, [r0, #0x20]			@ S5PC210_GPIO_A1_OFFSET
+
+	/* UART_SEL GPY4[7] (part2) at S5PC210 */
+	add	r0, r6, #0x1A0			@ S5PC210_GPIO_Y4_OFFSET
+	ldr	r1, [r0, #0x0]
+	bic	r1, r1, #(0xf << 28)		@ 28 = 7 * 4-bit
+	orr	r1, r1, #(0x1 << 28)
+	str	r1, [r0, #0x0]
+
+	ldr	r1, [r0, #0x8]
+	bic	r1, r1, #(0x3 << 14)		@ 14 = 7 * 2-bit
+	orr	r1, r1, #(0x3 << 14)		@ Pull-up enabled
+	str	r1, [r0, #0x8]
+
+	ldr	r1, [r0, #0x4]
+	orr	r1, r1, #(1 << 7)		@ 7 = 7 * 1-bit
+	str	r1, [r0, #0x4]
+
+	mov	pc, lr
+	nop
+	nop
+	nop
+
+system_clock_init:
+	ldr	r0, =S5PC210_CLOCK_BASE
+
+	/* APLL(1), MPLL(1), CORE(0), HPM(0) */
+	ldr	r1, =0x0101
+	ldr	r2, =0x14200			@ CLK_SRC_CPU
+	str	r1, [r0, r2]
+
+	/* wait ?us */
+	mov	r1, #0x10000
+1:	subs	r1, r1, #1
+	bne	1b
+
+	/*
+	 * CLK_SRC_TOP0
+	 * MUX_ONENAND_SEL[28]	0: DOUT133, 1: DOUT166
+	 * MUX_VPLL_SEL[8]	0: FINPLL,  1: FOUTVPLL
+	 * MUX_EPLL_SEL[4]	0: FINPLL,  1: FOUTEPLL
+	 */
+	ldr	r1, =0x10000110
+	ldr	r2, =0x0C210			@ CLK_SRC_TOP
+	str	r1, [r0, r2]
+
+	/* SATA: SCLKMPLL(0), MMC[0:4]: SCLKMPLL(6) */
+	ldr	r1, =0x0066666
+	ldr	r2, =0x0C240			@ CLK_SRC_FSYS
+	str	r1, [r0, r2]
+	/* UART[0:5], PWM: SCLKMPLL(6) */
+	ldr	r1, =0x6666666
+	ldr	r2, =0x0C250			@ CLK_SRC_PERIL0_OFFSET
+	str	r1, [r0, r2]
+
+	/* CPU0: CORE, COREM0, COREM1, PERI, ATB, PCLK_DBG, APLL */
+	ldr	r1, =0x0133730
+	ldr	r2, =0x14500			@ CLK_DIV_CPU0
+	str	r1, [r0, r2]
+	/* CPU1: COPY, HPM */
+	ldr	r1, =0x03
+	ldr	r2, =0x14504			@ CLK_DIV_CPU1
+	str	r1, [r0, r2]
+	/* DMC0: ACP, ACP_PCLK, DPHY, DMC, DMCD, DMCP, COPY2 CORE_TIMER */
+	ldr	r1, =0x13111113
+	ldr	r2, =0x10500			@ CLK_DIV_DMC0
+	str	r1, [r0, r2]
+	/* DMC1: PWI, DVSEM, DPM */
+	ldr	r1, =0x01010100
+	ldr	r2, =0x10504			@ CLK_DIV_DMC1
+	str	r1, [r0, r2]
+	/* LEFTBUS: GDL, GPL */
+	ldr	r1, =0x13
+	ldr	r2, =0x04500			@ CLK_DIV_LEFTBUS
+	str	r1, [r0, r2]
+	/* RIGHHTBUS: GDR, GPR */
+	ldr	r1, =0x13
+	ldr	r2, =0x08500			@ CLK_DIV_RIGHTBUS
+	str	r1, [r0, r2]
+	/*
+	 * CLK_DIV_TOP
+	 * ONENAND_RATIOD[18:16]: 0 SCLK_ONENAND = MOUTONENAND / (n + 1)
+	 * ACLK_200, ACLK_100, ACLK_160, ACLK_133,
+	 */
+	ldr	r1, =0x00005473
+	ldr	r2, =0x0C510			@ CLK_DIV_TOP
+	str	r1, [r0, r2]
+	/* MMC[0:1] */
+	ldr	r1, =0x000f000f			/* 800(MPLL) / (15 + 1) */
+	ldr	r2, =0x0C544			@ CLK_DIV_FSYS1
+	str	r1, [r0, r2]
+	/* MMC[2:3] */
+	ldr	r1, =0x000f000f			/* 800(MPLL) / (15 + 1) */
+	ldr	r2, =0x0C548			@ CLK_DIV_FSYS2
+	str	r1, [r0, r2]
+	/* MMC4 */
+	ldr	r1, =0x000f			/* 800(MPLL) / (15 + 1) */
+	ldr	r2, =0x0C54C			@ CLK_DIV_FSYS3
+	str	r1, [r0, r2]
+	/* UART[0:5] */
+	ldr	r1, =0x774777
+	ldr	r2, =0x0C550			@ CLK_DIV_PERIL0
+	str	r1, [r0, r2]
+	/* SLIMBUS: ???, PWM */
+	ldr	r1, =0x8
+	ldr	r2, =0x0C55C			@ CLK_DIV_PERIL3
+	str	r1, [r0, r2]
+
+	/* PLL Setting */
+	ldr	r1, =0x1C20
+	ldr	r2, =0x14000			@ APLL_LOCK
+	str	r1, [r0, r2]
+	ldr	r2, =0x14008			@ MPLL_LOCK
+	str	r1, [r0, r2]
+	ldr	r2, =0x0C010			@ EPLL_LOCK
+	str	r1, [r0, r2]
+	ldr	r2, =0x0C020			@ VPLL_LOCK
+	str	r1, [r0, r2]
+
+	/* APLL */
+	ldr	r1, =0x8000001c
+	ldr	r2, =0x14104			@ APLL_CON1
+	str	r1, [r0, r2]
+	ldr	r1, =0x80c80601			@ 800MHz
+	ldr	r2, =0x14100			@ APLL_CON0
+	str	r1, [r0, r2]
+	/* MPLL */
+	ldr	r1, =0x8000001C
+	ldr	r2, =0x1410C			@ MPLL_CON1
+	str	r1, [r0, r2]
+	ldr	r1, =0x80c80601			@ 800MHz
+	ldr	r2, =0x14108			@ MPLL_CON0
+	str	r1, [r0, r2]
+	/* EPLL */
+	ldr	r1, =0x0
+	ldr	r2, =0x0C114			@ EPLL_CON1
+	str	r1, [r0, r2]
+	ldr	r1, =0x80300302			@ 96MHz
+	ldr	r2, =0x0C110			@ EPLL_CON0
+	str	r1, [r0, r2]
+	/* VPLL */
+	ldr	r1, =0x11000400
+	ldr	r2, =0x0C124			@ VPLL_CON1
+	str	r1, [r0, r2]
+	ldr	r1, =0x80350302			@ 108MHz
+	ldr	r2, =0x0C120			@ VPLL_CON0
+	str	r1, [r0, r2]
+
+	/*
+	 * SMMUJPEG[11], JPEG[6], CSIS1[5]		: 0111 1001
+	 * Turn off all
+	 */
+	ldr	r1, =0xFFF80000
+	ldr	r2, =0x0C920			@ CLK_GATE_IP_CAM
+	str	r1, [r0, r2]
+
+	/* Turn off all */
+	ldr	r1, =0xFFFFFFC0
+	ldr	r2, =0x0C924			@ CLK_GATE_IP_VP
+	str	r1, [r0, r2]
+
+	/* Turn off all */
+	ldr	r1, =0xFFFFFFE0
+	ldr	r2, =0x0C928			@ CLK_GATE_IP_MFC
+	str	r1, [r0, r2]
+
+	/* Turn off all */
+	ldr	r1, =0xFFFFFFFC
+	ldr	r2, =0x0C92C			@ CLK_GATE_IP_G3D
+	str	r1, [r0, r2]
+
+	/* Turn off all */
+	ldr	r1, =0xFFFFFC00
+	ldr	r2, =0x0C930			@ CLK_GATE_IP_IMAGE
+	str	r1, [r0, r2]
+
+	/* DSIM0[3], MDNIE0[2], MIE0[1]			: 0001 */
+	ldr	r1, =0xFFFFFFF1
+	ldr	r2, =0x0C934			@ CLK_GATE_IP_LCD0
+	str	r1, [r0, r2]
+
+	/* Turn off all */
+	ldr	r1, =0xFFFFFFC0
+	ldr	r2, =0x0C938			@ CLK_GATE_IP_LCD1
+	str	r1, [r0, r2]
+
+	/*
+	 * SMMUPCIE[18], NFCON[16]			: 1111 1010
+	 * PCIE[14],  SATA[10], SDMMC43[9:8]		: 1011 1000
+	 * SDMMC1[6], TSI[4], SATAPHY[3], PCIEPHY[2]	: 1010 0011
+	 */
+	ldr	r1, =0xFFFAB8A3
+	ldr	r2, =0x0C940			@ CLK_GATE_IP_FSYS
+	str	r1, [r0, r2]
+
+	/* Turn off all */
+	ldr	r1, =0xFFFFFFFC
+	ldr	r2, =0x0C94C			@ CLK_GATE_IP_GPS
+	str	r1, [r0, r2]
+
+	/*
+	 * AC97[27], SPDIF[26], SLIMBUS[25]		: 1111 0001
+	 * I2C2[8]					: 1111 1110
+	 */
+	ldr	r1, =0xF1FFFEFF
+	ldr	r2, =0x0C950			@ CLK_GATE_IP_PERIL
+	str	r1, [r0, r2]
+
+	/*
+	 * KEYIF[16]					: 1111 1110
+	 */
+	ldr	r1, =0xFFFEFFFF
+	ldr	r2, =0x0C960			@ CLK_GATE_IP_PERIR
+	str	r1, [r0, r2]
+
+	/* LCD1[5], G3D[3], MFC[2], TV[1]		: 1101 0001 */
+	ldr	r1, =0xFFFFFFD1
+	ldr	r2, =0x0C970			@ CLK_GATE_BLOCK
+	str	r1, [r0, r2]
+	mov	pc, lr
+	nop
+	nop
+	nop
+
+system_power_init:
+	ldr	r0, =S5PC210_POWER_BASE		@ 0x10020000
+
+	ldr	r2, =0x330C			@ PS_HOLD_CONTROL
+	ldr	r1, [r0, r2]
+	orr	r1, r1, #(0x3 << 8)		@ Data High, Output En
+	str	r1, [r0, r2]
+
+	/* Power Down */
+	add	r2, r0, #0x3000
+	str	r5, [r2, #0xC20]		@ TV_CONFIGURATION
+	str	r5, [r2, #0xC40]		@ MFC_CONFIGURATION
+	str	r5, [r2, #0xC60]		@ G3D_CONFIGURATION
+	str	r5, [r2, #0xCA0]		@ LCD1_CONFIGURATION
+	str	r5, [r2, #0xCE0]		@ GPS_CONFIGURATION
+
+	mov	pc, lr
+	nop
+	nop
+	nop
+
+tzpc_init:
+	ldr	r0, =0x10110000
+	mov	r1, #0x0
+	str	r1, [r0]
+	mov	r1, #0xff
+	str	r1, [r0, #0x0804]
+	str	r1, [r0, #0x0810]
+	str	r1, [r0, #0x081C]
+	str	r1, [r0, #0x0828]
+
+	ldr	r0, =0x10120000
+	mov	r1, #0x0
+	str	r1, [r0]
+	mov	r1, #0xff
+	str	r1, [r0, #0x0804]
+	str	r1, [r0, #0x0810]
+	str	r1, [r0, #0x081C]
+	str	r1, [r0, #0x0828]
+
+	ldr	r0, =0x10130000
+	mov	r1, #0x0
+	str	r1, [r0]
+	mov	r1, #0xff
+	str	r1, [r0, #0x0804]
+	str	r1, [r0, #0x0810]
+	str	r1, [r0, #0x081C]
+	str	r1, [r0, #0x0828]
+
+	ldr	r0, =0x10140000
+	mov	r1, #0x0
+	str	r1, [r0]
+	mov	r1, #0xff
+	str	r1, [r0, #0x0804]
+	str	r1, [r0, #0x0810]
+	str	r1, [r0, #0x081C]
+	str	r1, [r0, #0x0828]
+
+	ldr	r0, =0x10150000
+	mov	r1, #0x0
+	str	r1, [r0]
+	mov	r1, #0xff
+	str	r1, [r0, #0x0804]
+	str	r1, [r0, #0x0810]
+	str	r1, [r0, #0x081C]
+	str	r1, [r0, #0x0828]
+
+	mov	pc, lr
diff --git a/board/samsung/nuri/nuri.c b/board/samsung/nuri/nuri.c
new file mode 100644
index 0000000..7edd1ed
--- /dev/null
+++ b/board/samsung/nuri/nuri.c
@@ -0,0 +1,202 @@
+/*
+ *  Copyright (C) 2011 Samsung Electronics
+ *  Minkyu Kang <mk7.kang at samsung.com>
+ *  Kyungmin Park <kyungmin.park at samsung.com>
+ *  Łukasz Majewski <l.majewski at samsung.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/adc.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/mmc.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+struct s5pc210_gpio_part1 *gpio1;
+struct s5pc210_gpio_part2 *gpio2;
+static unsigned int board_rev;
+
+u32 get_board_rev(void)
+{
+	return board_rev;
+}
+
+static void check_hw_revision(void);
+
+int board_init(void)
+{
+	gpio1 = (struct s5pc210_gpio_part1 *) S5PC210_GPIO_PART1_BASE;
+	gpio2 = (struct s5pc210_gpio_part2 *) S5PC210_GPIO_PART2_BASE;
+
+	gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
+
+	check_hw_revision();
+	printf("HW Revision:\t0x%x\n", board_rev);
+
+	return 0;
+}
+
+int dram_init(void)
+{
+	gd->ram_size = \
+		get_ram_size((long *)PHYS_SDRAM_1, PHYS_SDRAM_1_SIZE) +
+		get_ram_size((long *)PHYS_SDRAM_2, PHYS_SDRAM_2_SIZE) +
+		get_ram_size((long *)PHYS_SDRAM_3, PHYS_SDRAM_3_SIZE) +
+		get_ram_size((long *)PHYS_SDRAM_4, PHYS_SDRAM_4_SIZE);
+
+	return 0;
+}
+
+void dram_init_banksize(void)
+{
+	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
+	gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
+	gd->bd->bi_dram[1].start = PHYS_SDRAM_2;
+	gd->bd->bi_dram[1].size = PHYS_SDRAM_2_SIZE;
+	gd->bd->bi_dram[2].start = PHYS_SDRAM_3;
+	gd->bd->bi_dram[2].size = PHYS_SDRAM_3_SIZE;
+	gd->bd->bi_dram[3].start = PHYS_SDRAM_4;
+	gd->bd->bi_dram[3].size = PHYS_SDRAM_4_SIZE;
+}
+
+static unsigned int get_hw_revision(void)
+{
+	int hwrev = 0;
+	int i;
+
+	/* NFC_EN: GPL2[6]: output high - early enable for board type chcking */
+	s5p_gpio_direction_output(&gpio2->l2, 6, 1);
+
+	/* HW_REV[0:3]: GPE1[0:3] */
+	for (i = 0; i < 4; i++) {
+		s5p_gpio_direction_input(&gpio1->e1, i);
+		s5p_gpio_set_pull(&gpio1->e1, i, GPIO_PULL_NONE);
+	}
+
+	udelay(10);
+
+	for (i = 0; i < 4; i++)
+		hwrev |= (s5p_gpio_get_value(&gpio1->e1, i) << i);
+
+	debug("hwrev 0x%x\n", hwrev);
+
+	return hwrev;
+}
+
+static void check_hw_revision(void)
+{
+	board_rev = get_hw_revision();
+}
+
+#ifdef CONFIG_DISPLAY_BOARDINFO
+int checkboard(void)
+{
+	puts("Board:\tExynos4 Nuri\n");
+	return 0;
+}
+#endif
+
+#ifdef CONFIG_GENERIC_MMC
+int board_mmc_init(bd_t *bis)
+{
+	int i, err;
+
+	/* MASSMEMORY_EN: GPL[1] -> output LOW */
+	s5p_gpio_direction_output(&gpio2->l1, 1, 0);
+	s5p_gpio_set_pull(&gpio2->l1, 1, GPIO_PULL_NONE);
+
+	/*
+	 * eMMC GPIO:
+	 * SDR 8-bit at 48MHz at MMC0
+	 * GPK0[0]	SD_0_CLK(2)
+	 * GPK0[1]	SD_0_CMD(2)
+	 * GPK0[2]	SD_0_CDn	-> Not used
+	 * GPK0[3:6]	SD_0_DATA[0:3](2)
+	 * GPK1[3:6]	SD_0_DATA[0:3](3)
+	 *
+	 * DDR 4-bit at 26MHz at MMC4
+	 * GPK0[0]	SD_4_CLK(3)
+	 * GPK0[1]	SD_4_CMD(3)
+	 * GPK0[2]	SD_4_CDn	-> Not used
+	 * GPK0[3:6]	SD_4_DATA[0:3](3)
+	 * GPK1[3:6]	SD_4_DATA[4:7](4)
+	 */
+	for (i = 0; i < 7; i++) {
+		if (i == 2)
+			continue;
+		/* GPK0[0:6] special function 2 */
+		s5p_gpio_cfg_pin(&gpio2->k0, i, GPIO_FUNC(0x2));
+		/* GPK0[0:6] pull disable */
+		s5p_gpio_set_pull(&gpio2->k0, i, GPIO_PULL_NONE);
+		/* GPK0[0:6] drv 4x */
+		s5p_gpio_set_drv(&gpio2->k0, i, GPIO_DRV_4X);
+	}
+
+	for (i = 3; i < 7; i++) {
+		/* GPK1[3:6] special function 3 */
+		s5p_gpio_cfg_pin(&gpio2->k1, i, GPIO_FUNC(0x3));
+		/* GPK1[3:6] pull disable */
+		s5p_gpio_set_pull(&gpio2->k1, i, GPIO_PULL_NONE);
+		/* GPK1[3:6] drv 4x */
+		s5p_gpio_set_drv(&gpio2->k1, i, GPIO_DRV_4X);
+	}
+
+	/*
+	 * MMC device init
+	 * mmc0	 : eMMC (8-bit buswidth)
+	 * mmc2	 : SD card (4-bit buswidth)
+	 */
+	err = s5p_mmc_init(0, 8);
+
+	/* T-flash detect */
+	s5p_gpio_cfg_pin(&gpio2->x3, 3, GPIO_IRQ);
+	s5p_gpio_set_pull(&gpio2->x3, 3, GPIO_PULL_UP);
+
+	/*
+	 * Check the T-flash  detect pin
+	 * GPX3[3] T-flash detect pin
+	 */
+	if (!s5p_gpio_get_value(&gpio2->x3, 3)) {
+		/*
+		 * SD card GPIO:
+		 * GPK2[0]	SD_2_CLK(2)
+		 * GPK2[1]	SD_2_CMD(2)
+		 * GPK2[2]	SD_2_CDn	-> Not used
+		 * GPK2[3:6]	SD_2_DATA[0:3](2)
+		 */
+		for (i = 0; i < 7; i++) {
+			if (i == 2)
+				continue;
+			/* GPK2[0:6] special function 2 */
+			s5p_gpio_cfg_pin(&gpio2->k2, i, GPIO_FUNC(0x2));
+			/* GPK2[0:6] pull disable */
+			s5p_gpio_set_pull(&gpio2->k2, i, GPIO_PULL_NONE);
+			/* GPK2[0:6] drv 4x */
+			s5p_gpio_set_drv(&gpio2->k2, i, GPIO_DRV_4X);
+		}
+		err = s5p_mmc_init(2, 4);
+	}
+
+	return err;
+
+}
+#endif
diff --git a/boards.cfg b/boards.cfg
index 604becf..6ae4f3d 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -189,6 +189,7 @@ omap4_panda                  arm         armv7       panda               ti
 omap4_sdp4430                arm         armv7       sdp4430             ti             omap4
 s5p_goni                     arm         armv7       goni                samsung        s5pc1xx
 smdkc100                     arm         armv7       smdkc100            samsung        s5pc1xx
+exynos4_nuri                 arm         armv7       nuri                samsung        s5pc2xx
 origen			     arm	 armv7	     origen		 samsung	s5pc2xx
 s5pc210_universal            arm         armv7       universal_c210      samsung        s5pc2xx
 smdkv310		     arm	 armv7	     smdkv310		 samsung	s5pc2xx
diff --git a/include/configs/exynos4_nuri.h b/include/configs/exynos4_nuri.h
new file mode 100644
index 0000000..35858ec
--- /dev/null
+++ b/include/configs/exynos4_nuri.h
@@ -0,0 +1,210 @@
+/*
+ * Copyright (C) 2011 Samsung Electronics
+ * Łukasz Majewski <l.majewski at samsung.com>
+ *
+ * Configuation settings for the SAMSUNG Universal (s5pc100) board.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * High Level Configuration Options
+ *
+ */
+#define CONFIG_SAMSUNG			/* in a SAMSUNG core */
+#define CONFIG_S5P			/* which is in a S5P Family */
+#define CONFIG_S5PC210			/* which is in a S5PC210 */
+#define CONFIG_NURI			/* working with NURI */
+
+#define MACH_TYPE_NURI                 3379
+#define CONFIG_MACH_TYPE               MACH_TYPE_NURI /* NURI mach type */
+
+#include <asm/arch/cpu.h>		/* get chip and board defs */
+
+#define CONFIG_ARCH_CPU_INIT
+#define CONFIG_DISPLAY_CPUINFO
+#define CONFIG_DISPLAY_BOARDINFO
+
+/* Keep L2 Cache Disabled */
+#define CONFIG_SYS_L2CACHE_OFF		1
+
+#define CONFIG_SYS_SDRAM_BASE		0x40000000
+#define CONFIG_SYS_TEXT_BASE		0x44800000
+
+/* input clock of PLL: Universal has 24MHz input clock at S5PC210 */
+#define CONFIG_SYS_CLK_FREQ_C210	24000000
+
+#define CONFIG_SETUP_MEMORY_TAGS
+#define CONFIG_CMDLINE_TAG
+#define CONFIG_INITRD_TAG
+#define CONFIG_REVISION_TAG
+#define CONFIG_CMDLINE_EDITING
+
+/* Size of malloc() pool */
+#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + (1 << 20))
+
+/* select serial console configuration */
+#define CONFIG_SERIAL_MULTI
+#define CONFIG_SERIAL2			/* use SERIAL 2 */
+#define CONFIG_BAUDRATE	115200
+
+/* MMC */
+#define CONFIG_GENERIC_MMC
+#define CONFIG_MMC
+#define CONFIG_S5P_MMC
+
+/* PWM */
+#define CONFIG_PWM
+
+/* It should define before config_cmd_default.h */
+#define CONFIG_SYS_NO_FLASH
+
+/* Command definition */
+#include <config_cmd_default.h>
+
+#undef CONFIG_CMD_FPGA
+#undef CONFIG_CMD_MISC
+#undef CONFIG_CMD_NET
+#undef CONFIG_CMD_NFS
+#undef CONFIG_CMD_XIMG
+#define CONFIG_CMD_CACHE
+#define CONFIG_CMD_MMC
+#define CONFIG_CMD_FAT
+
+#define CONFIG_BOOTDELAY		2
+#define CONFIG_ZERO_BOOTDELAY_CHECK
+
+#define CONFIG_BOOTARGS		"Please use defined boot"
+#define CONFIG_BOOTCOMMAND	"run mmcboot"
+#define CONFIG_DEFAULT_CONSOLE	"console=ttySAC2,115200n8\0"
+
+#define CONFIG_BOOTBLOCK	"10"
+#define CONFIG_UBIBLOCK		"9"
+
+#define CONFIG_ENV_UBIFS_OPTION	" rootflags=bulk_read,no_chk_data_crc "
+
+#define CONFIG_ENV_COMMON_BOOT	"${console} ${meminfo}"
+
+#define CONFIG_ENV_OVERWRITE
+#define CONFIG_SYS_CONSOLE_INFO_QUIET
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV
+
+#define MBRPARTS_DEFAULT	"20M(permanent)"\
+				",20M(boot)"\
+				",1G(system)"\
+				",100M(swap)"\
+				",-(UMS)\0"
+
+#define CONFIG_EXTRA_ENV_SETTINGS					\
+	"bootk=" \
+		"run loaduimage; bootm 0x40007FC0\0" \
+	"updatemmc=" \
+		"mmc boot 0 1 1 1; mmc write 0 0x42008000 0 0x200;" \
+		"mmc boot 0 1 1 0\0" \
+	"updatebackup=" \
+		"mmc boot 0 1 1 2; mmc write 0 0x42100000 0 0x200;" \
+		"mmc boot 0 1 1 0\0" \
+	"updatebootb=" \
+		"mmc read 0 0x42100000 0x80 0x200; run updatebackup\0" \
+	"lpj=lpj=3981312\0" \
+	"nfsboot=" \
+		"set bootargs root=/dev/nfs rw " \
+		"nfsroot=${nfsroot},nolock,tcp " \
+		"ip=${ipaddr}:${serverip}:${gatewayip}:" \
+		"${netmask}:generic:usb0:off " CONFIG_ENV_COMMON_BOOT \
+		"; run bootk\0" \
+	"ramfsboot=" \
+		"set bootargs root=/dev/ram0 rw rootfstype=ext2 " \
+		"${console} ${meminfo} " \
+		"initrd=0x43000000,8M ramdisk=8192\0" \
+	"mmcboot=" \
+		"set bootargs root=/dev/mmcblk${mmcdev}p${mmcrootpart} " \
+		"${lpj} rootwait ${console} ${meminfo} ${opts} ${lcdinfo}; " \
+		"run loaduimage; bootm 0x40007FC0\0" \
+	"bootchart=set opts init=/sbin/bootchartd; run bootcmd\0" \
+	"boottrace=setenv opts initcall_debug; run bootcmd\0" \
+	"mmcoops=mmc read 0 0x40000000 0x40 8; md 0x40000000 0x400\0" \
+	"verify=n\0" \
+	"rootfstype=ext4\0" \
+	"console=" CONFIG_DEFAULT_CONSOLE \
+	"mbrparts=" MBRPARTS_DEFAULT \
+	"meminfo=crashkernel=32M at 0x50000000\0" \
+	"nfsroot=/nfsroot/arm\0" \
+	"bootblock=" CONFIG_BOOTBLOCK "\0" \
+	"ubiblock=" CONFIG_UBIBLOCK" \0" \
+	"loaduimage=fatload mmc ${mmcdev}:${mmcbootpart} 0x40007FC0 uImage\0" \
+	"mmcdev=0\0" \
+	"mmcbootpart=2\0" \
+	"mmcrootpart=5\0" \
+	"opts=always_resume=1"
+
+/* Miscellaneous configurable options */
+#define CONFIG_SYS_LONGHELP		/* undef to save memory */
+#define CONFIG_SYS_HUSH_PARSER		/* use "hush" command parser	*/
+#define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
+#define CONFIG_SYS_PROMPT	"Nuri # "
+#define CONFIG_SYS_CBSIZE	256	/* Console I/O Buffer Size */
+#define CONFIG_SYS_PBSIZE	384	/* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS	16	/* max number of command args */
+/* Boot Argument Buffer Size */
+#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE
+/* memtest works on */
+#define CONFIG_SYS_MEMTEST_START	CONFIG_SYS_SDRAM_BASE
+#define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_SDRAM_BASE + 0x5000000)
+#define CONFIG_SYS_LOAD_ADDR		(CONFIG_SYS_SDRAM_BASE + 0x4800000)
+
+#define CONFIG_SYS_HZ			1000
+
+/* valid baudrates */
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+
+/* Stack sizes */
+#define CONFIG_STACKSIZE	(256 << 10)	/* regular stack 256KB */
+
+/* Nuri has 2 banks of DRAM -> support bank swapping */
+#define CONFIG_NR_DRAM_BANKS	4
+#define PHYS_SDRAM_1		CONFIG_SYS_SDRAM_BASE	/* LDDDR2 DMC 0 */
+#define PHYS_SDRAM_1_SIZE	(256 << 20)		/* 256 MB in CS 0 */
+#define PHYS_SDRAM_2		0x50000000		/* LPDDR2 DMC 1 */
+#define PHYS_SDRAM_2_SIZE	(256 << 20)		/* 256 MB in CS 0 */
+#define PHYS_SDRAM_3		0x60000000
+#define PHYS_SDRAM_3_SIZE	(256 << 20)
+#define PHYS_SDRAM_4		0x70000000
+#define PHYS_SDRAM_4_SIZE	(256 << 20)
+
+#define CONFIG_SYS_MEM_TOP_HIDE		(1 << 20)	/* ram console */
+
+#define CONFIG_SYS_MONITOR_BASE		0x00000000
+#define CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 2 sectors */
+
+#define CONFIG_ENV_IS_IN_MMC
+#define CONFIG_SYS_MMC_ENV_DEV		0
+#define CONFIG_ENV_SIZE			4096
+#define CONFIG_ENV_OFFSET		((32 - 4) << 10)/* 32KiB - 4KiB */
+
+#define CONFIG_DOS_PARTITION
+
+#define CONFIG_SYS_INIT_SP_ADDR	(CONFIG_SYS_LOAD_ADDR - GENERATED_GBL_DATA_SIZE)
+
+#define CONFIG_SYS_CACHELINE_SIZE       32
+
+#endif	/* __CONFIG_H */
-- 
1.7.2.3



More information about the U-Boot mailing list