[U-Boot] [PATCH v2 4/7] omap5: clocks: Add clocks support for omap5 platform.

sricharan r.sricharan at ti.com
Fri Nov 11 06:15:22 CET 2011


Adding the correct configurations required for
dplls, clocks, for omap5 Soc.

Also changes are done to retain some part of the code common
for OMAP4/5 and move only the remaining to the Soc specific
directories.

Signed-off-by: sricharan <r.sricharan at ti.com>
---
Changes in V2:
  * Rebased for latest mainline.

 arch/arm/cpu/armv7/omap-common/Makefile        |    4 +-
 arch/arm/cpu/armv7/omap-common/clocks-common.c |  563 ++++---------------
 arch/arm/cpu/armv7/omap-common/emif-common.c   |    2 +-
 arch/arm/cpu/armv7/omap4/Makefile              |    1 +
 arch/arm/cpu/armv7/omap4/clocks.c              |  479 ++++++++++++++++
 arch/arm/cpu/armv7/omap5/clocks.c              |  412 ++++++++++++++
 arch/arm/include/asm/arch-omap4/clocks.h       |   22 +
 arch/arm/include/asm/arch-omap4/sys_proto.h    |    2 -
 arch/arm/include/asm/arch-omap5/clocks.h       |  721 ++++++++++++++++++++++++
 arch/arm/include/asm/arch-omap5/sys_proto.h    |    3 +-
 10 files changed, 1735 insertions(+), 474 deletions(-)
 create mode 100644 arch/arm/cpu/armv7/omap4/clocks.c
 create mode 100644 arch/arm/cpu/armv7/omap5/clocks.c
 create mode 100644 arch/arm/include/asm/arch-omap5/clocks.h

diff --git a/arch/arm/cpu/armv7/omap-common/Makefile b/arch/arm/cpu/armv7/omap-common/Makefile
index ea2545d..a684611 100644
--- a/arch/arm/cpu/armv7/omap-common/Makefile
+++ b/arch/arm/cpu/armv7/omap-common/Makefile
@@ -33,7 +33,7 @@ ifdef CONFIG_OMAP
 COBJS	+= gpio.o
 endif
 
-ifdef CONFIG_OMAP44XX
+ifneq ($(CONFIG_OMAP44XX)$(CONFIG_OMAP54XX),)
 COBJS	+= hwinit-common.o
 COBJS	+= clocks-common.o
 COBJS	+= emif-common.o
@@ -51,7 +51,7 @@ endif
 endif
 
 ifndef CONFIG_SPL_BUILD
-ifdef CONFIG_OMAP44XX
+ifneq ($(CONFIG_OMAP44XX)$(CONFIG_OMAP54XX),)
 COBJS	+= mem-common.o
 endif
 endif
diff --git a/arch/arm/cpu/armv7/omap-common/clocks-common.c b/arch/arm/cpu/armv7/omap-common/clocks-common.c
index 9f5200d..c726093 100644
--- a/arch/arm/cpu/armv7/omap-common/clocks-common.c
+++ b/arch/arm/cpu/armv7/omap-common/clocks-common.c
@@ -46,139 +46,6 @@
 #define puts(s)
 #endif
 
-#define abs(x) (((x) < 0) ? ((x)*-1) : (x))
-
-struct omap4_prcm_regs *const prcm = (struct omap4_prcm_regs *)0x4A004100;
-
-static const u32 sys_clk_array[8] = {
-	12000000,	       /* 12 MHz */
-	13000000,	       /* 13 MHz */
-	16800000,	       /* 16.8 MHz */
-	19200000,	       /* 19.2 MHz */
-	26000000,	       /* 26 MHz */
-	27000000,	       /* 27 MHz */
-	38400000,	       /* 38.4 MHz */
-};
-
-/*
- * The M & N values in the following tables are created using the
- * following tool:
- * tools/omap/clocks_get_m_n.c
- * Please use this tool for creating the table for any new frequency.
- */
-
-/* dpll locked at 1840 MHz MPU clk at 920 MHz(OPP Turbo 4460) - DCC OFF */
-static const struct dpll_params mpu_dpll_params_1840mhz[NUM_SYS_CLKS] = {
-	{230, 2, 1, -1, -1, -1, -1, -1},	/* 12 MHz   */
-	{920, 12, 1, -1, -1, -1, -1, -1},	/* 13 MHz   */
-	{219, 3, 1, -1, -1, -1, -1, -1},	/* 16.8 MHz */
-	{575, 11, 1, -1, -1, -1, -1, -1},	/* 19.2 MHz */
-	{460, 12, 1, -1, -1, -1, -1, -1},	/* 26 MHz   */
-	{920, 26, 1, -1, -1, -1, -1, -1},	/* 27 MHz   */
-	{575, 23, 1, -1, -1, -1, -1, -1}	/* 38.4 MHz */
-};
-
-/* dpll locked at 1584 MHz - MPU clk at 792 MHz(OPP Turbo 4430) */
-static const struct dpll_params mpu_dpll_params_1584mhz[NUM_SYS_CLKS] = {
-	{66, 0, 1, -1, -1, -1, -1, -1},		/* 12 MHz   */
-	{792, 12, 1, -1, -1, -1, -1, -1},	/* 13 MHz   */
-	{330, 6, 1, -1, -1, -1, -1, -1},	/* 16.8 MHz */
-	{165, 3, 1, -1, -1, -1, -1, -1},	/* 19.2 MHz */
-	{396, 12, 1, -1, -1, -1, -1, -1},	/* 26 MHz   */
-	{88, 2, 1, -1, -1, -1, -1, -1},		/* 27 MHz   */
-	{165, 7, 1, -1, -1, -1, -1, -1}		/* 38.4 MHz */
-};
-
-/* dpll locked at 1200 MHz - MPU clk at 600 MHz */
-static const struct dpll_params mpu_dpll_params_1200mhz[NUM_SYS_CLKS] = {
-	{50, 0, 1, -1, -1, -1, -1, -1},		/* 12 MHz   */
-	{600, 12, 1, -1, -1, -1, -1, -1},	/* 13 MHz   */
-	{250, 6, 1, -1, -1, -1, -1, -1},	/* 16.8 MHz */
-	{125, 3, 1, -1, -1, -1, -1, -1},	/* 19.2 MHz */
-	{300, 12, 1, -1, -1, -1, -1, -1},	/* 26 MHz   */
-	{200, 8, 1, -1, -1, -1, -1, -1},	/* 27 MHz   */
-	{125, 7, 1, -1, -1, -1, -1, -1}		/* 38.4 MHz */
-};
-
-static const struct dpll_params core_dpll_params_1600mhz[NUM_SYS_CLKS] = {
-	{200, 2, 1, 5, 8, 4, 6, 5},	/* 12 MHz   */
-	{800, 12, 1, 5, 8, 4, 6, 5},	/* 13 MHz   */
-	{619, 12, 1, 5, 8, 4, 6, 5},	/* 16.8 MHz */
-	{125, 2, 1, 5, 8, 4, 6, 5},	/* 19.2 MHz */
-	{400, 12, 1, 5, 8, 4, 6, 5},	/* 26 MHz   */
-	{800, 26, 1, 5, 8, 4, 6, 5},	/* 27 MHz   */
-	{125, 5, 1, 5, 8, 4, 6, 5}	/* 38.4 MHz */
-};
-
-static const struct dpll_params core_dpll_params_es1_1524mhz[NUM_SYS_CLKS] = {
-	{127, 1, 1, 5, 8, 4, 6, 5},	/* 12 MHz   */
-	{762, 12, 1, 5, 8, 4, 6, 5},	/* 13 MHz   */
-	{635, 13, 1, 5, 8, 4, 6, 5},	/* 16.8 MHz */
-	{635, 15, 1, 5, 8, 4, 6, 5},	/* 19.2 MHz */
-	{381, 12, 1, 5, 8, 4, 6, 5},	/* 26 MHz   */
-	{254, 8, 1, 5, 8, 4, 6, 5},	/* 27 MHz   */
-	{496, 24, 1, 5, 8, 4, 6, 5}	/* 38.4 MHz */
-};
-
-static const struct dpll_params
-		core_dpll_params_es2_1600mhz_ddr200mhz[NUM_SYS_CLKS] = {
-	{200, 2, 2, 5, 8, 4, 6, 5},	/* 12 MHz   */
-	{800, 12, 2, 5, 8, 4, 6, 5},	/* 13 MHz   */
-	{619, 12, 2, 5, 8, 4, 6, 5},	/* 16.8 MHz */
-	{125, 2, 2, 5, 8, 4, 6, 5},	/* 19.2 MHz */
-	{400, 12, 2, 5, 8, 4, 6, 5},	/* 26 MHz   */
-	{800, 26, 2, 5, 8, 4, 6, 5},	/* 27 MHz   */
-	{125, 5, 2, 5, 8, 4, 6, 5}	/* 38.4 MHz */
-};
-
-static const struct dpll_params per_dpll_params_1536mhz[NUM_SYS_CLKS] = {
-	{64, 0, 8, 6, 12, 9, 4, 5},	/* 12 MHz   */
-	{768, 12, 8, 6, 12, 9, 4, 5},	/* 13 MHz   */
-	{320, 6, 8, 6, 12, 9, 4, 5},	/* 16.8 MHz */
-	{40, 0, 8, 6, 12, 9, 4, 5},	/* 19.2 MHz */
-	{384, 12, 8, 6, 12, 9, 4, 5},	/* 26 MHz   */
-	{256, 8, 8, 6, 12, 9, 4, 5},	/* 27 MHz   */
-	{20, 0, 8, 6, 12, 9, 4, 5}	/* 38.4 MHz */
-};
-
-static const struct dpll_params iva_dpll_params_1862mhz[NUM_SYS_CLKS] = {
-	{931, 11, -1, -1, 4, 7, -1, -1},	/* 12 MHz   */
-	{931, 12, -1, -1, 4, 7, -1, -1},	/* 13 MHz   */
-	{665, 11, -1, -1, 4, 7, -1, -1},	/* 16.8 MHz */
-	{727, 14, -1, -1, 4, 7, -1, -1},	/* 19.2 MHz */
-	{931, 25, -1, -1, 4, 7, -1, -1},	/* 26 MHz   */
-	{931, 26, -1, -1, 4, 7, -1, -1},	/* 27 MHz   */
-	{412, 16, -1, -1, 4, 7, -1, -1}		/* 38.4 MHz */
-};
-
-/* ABE M & N values with sys_clk as source */
-static const struct dpll_params
-		abe_dpll_params_sysclk_196608khz[NUM_SYS_CLKS] = {
-	{49, 5, 1, 1, -1, -1, -1, -1},	/* 12 MHz   */
-	{68, 8, 1, 1, -1, -1, -1, -1},	/* 13 MHz   */
-	{35, 5, 1, 1, -1, -1, -1, -1},	/* 16.8 MHz */
-	{46, 8, 1, 1, -1, -1, -1, -1},	/* 19.2 MHz */
-	{34, 8, 1, 1, -1, -1, -1, -1},	/* 26 MHz   */
-	{29, 7, 1, 1, -1, -1, -1, -1},	/* 27 MHz   */
-	{64, 24, 1, 1, -1, -1, -1, -1}	/* 38.4 MHz */
-};
-
-/* ABE M & N values with 32K clock as source */
-static const struct dpll_params abe_dpll_params_32k_196608khz = {
-	750, 0, 1, 1, -1, -1, -1, -1
-};
-
-
-static const struct dpll_params usb_dpll_params_1920mhz[NUM_SYS_CLKS] = {
-	{80, 0, 2, -1, -1, -1, -1, -1},		/* 12 MHz   */
-	{960, 12, 2, -1, -1, -1, -1, -1},	/* 13 MHz   */
-	{400, 6, 2, -1, -1, -1, -1, -1},	/* 16.8 MHz */
-	{50, 0, 2, -1, -1, -1, -1, -1},		/* 19.2 MHz */
-	{480, 12, 2, -1, -1, -1, -1, -1},	/* 26 MHz   */
-	{320, 8, 2, -1, -1, -1, -1, -1},	/* 27 MHz   */
-	{25, 0, 2, -1, -1, -1, -1, -1}		/* 38.4 MHz */
-};
-
 static inline u32 __get_sys_clk_index(void)
 {
 	u32 ind;
@@ -271,46 +138,19 @@ static void do_setup_dpll(u32 *const base, const struct dpll_params *params,
 	if (lock)
 		do_lock_dpll(base);
 
-	/* Setup post-dividers */
-	if (params->m2 >= 0)
-		writel(params->m2, &dpll_regs->cm_div_m2_dpll);
-	if (params->m3 >= 0)
-		writel(params->m3, &dpll_regs->cm_div_m3_dpll);
-	if (params->m4 >= 0)
-		writel(params->m4, &dpll_regs->cm_div_m4_dpll);
-	if (params->m5 >= 0)
-		writel(params->m5, &dpll_regs->cm_div_m5_dpll);
-	if (params->m6 >= 0)
-		writel(params->m6, &dpll_regs->cm_div_m6_dpll);
-	if (params->m7 >= 0)
-		writel(params->m7, &dpll_regs->cm_div_m7_dpll);
+	setup_post_dividers(base, params);
 
 	/* Wait till the DPLL locks */
 	if (lock)
 		wait_for_lock(base);
 }
 
-const struct dpll_params *get_core_dpll_params(void)
+u32 omap_ddr_clk(void)
 {
-	u32 sysclk_ind = get_sys_clk_index();
-
-	switch (omap_revision()) {
-	case OMAP4430_ES1_0:
-		return &core_dpll_params_es1_1524mhz[sysclk_ind];
-	case OMAP4430_ES2_0:
-	case OMAP4430_SILICON_ID_INVALID:
-		 /* safest */
-		return &core_dpll_params_es2_1600mhz_ddr200mhz[sysclk_ind];
-	default:
-		return &core_dpll_params_1600mhz[sysclk_ind];
-	}
-}
-
-u32 omap4_ddr_clk(void)
-{
-	u32 ddr_clk, sys_clk_khz;
+	u32 ddr_clk, sys_clk_khz, omap_rev, divider;
 	const struct dpll_params *core_dpll_params;
 
+	omap_rev = omap_revision();
 	sys_clk_khz = get_sys_clk_freq() / 1000;
 
 	core_dpll_params = get_core_dpll_params();
@@ -320,12 +160,22 @@ u32 omap4_ddr_clk(void)
 	/* Find Core DPLL locked frequency first */
 	ddr_clk = sys_clk_khz * 2 * core_dpll_params->m /
 			(core_dpll_params->n + 1);
-	/*
-	 * DDR frequency is PHY_ROOT_CLK/2
-	 * PHY_ROOT_CLK = Fdpll/2/M2
-	 */
-	ddr_clk = ddr_clk / 4 / core_dpll_params->m2;
 
+	if (omap_rev < OMAP5430_ES1_0) {
+		/*
+		 * DDR frequency is PHY_ROOT_CLK/2
+		 * PHY_ROOT_CLK = Fdpll/2/M2
+		 */
+		divider = 4;
+	} else {
+		/*
+		 * DDR frequency is PHY_ROOT_CLK
+		 * PHY_ROOT_CLK = Fdpll/2/M2
+		 */
+		divider = 2;
+	}
+
+	ddr_clk = ddr_clk / divider / core_dpll_params->m2;
 	ddr_clk *= 1000;	/* convert to Hz */
 	debug("ddr_clk %d\n ", ddr_clk);
 
@@ -344,20 +194,16 @@ void configure_mpu_dpll(void)
 {
 	const struct dpll_params *params;
 	struct dpll_regs *mpu_dpll_regs;
-	u32 omap4_rev, sysclk_ind;
-
-	omap4_rev = omap_revision();
-	sysclk_ind = get_sys_clk_index();
-
-	if (omap4_rev == OMAP4430_ES1_0)
-		params = &mpu_dpll_params_1200mhz[sysclk_ind];
-	else if (omap4_rev < OMAP4460_ES1_0)
-		params = &mpu_dpll_params_1584mhz[sysclk_ind];
-	else
-		params = &mpu_dpll_params_1840mhz[sysclk_ind];
+	u32 omap_rev;
+	omap_rev = omap_revision();
 
-	/* DCC and clock divider settings for 4460 */
-	if (omap4_rev >= OMAP4460_ES1_0) {
+	/*
+	 * DCC and clock divider settings for 4460.
+	 * DCC is required, if more than a certain frequency is required.
+	 * For, 4460 > 1GHZ.
+	 *     5430 > 1.4GHZ.
+	 */
+	if ((omap_rev >= OMAP4460_ES1_0) && (omap_rev < OMAP5430_ES1_0)) {
 		mpu_dpll_regs =
 			(struct dpll_regs *)&prcm->cm_clkmode_dpll_mpu;
 		bypass_dpll(&prcm->cm_clkmode_dpll_mpu);
@@ -369,6 +215,7 @@ void configure_mpu_dpll(void)
 			CM_CLKSEL_DCC_EN_MASK);
 	}
 
+	params = get_mpu_dpll_params();
 	do_setup_dpll(&prcm->cm_clkmode_dpll_mpu, params, DPLL_LOCK);
 	debug("MPU DPLL locked\n");
 }
@@ -397,8 +244,9 @@ static void setup_dplls(void)
 	debug("Core DPLL configured\n");
 
 	/* lock PER dpll */
+	params = get_per_dpll_params();
 	do_setup_dpll(&prcm->cm_clkmode_dpll_per,
-			&per_dpll_params_1536mhz[sysclk_ind], DPLL_LOCK);
+			params, DPLL_LOCK);
 	debug("PER DPLL locked\n");
 
 	/* MPU dpll */
@@ -418,8 +266,8 @@ static void setup_non_essential_dplls(void)
 	clrsetbits_le32(&prcm->cm_bypclk_dpll_iva,
 		CM_BYPCLK_DPLL_IVA_CLKSEL_MASK, DPLL_IVA_CLKSEL_CORE_X2_DIV_2);
 
-	do_setup_dpll(&prcm->cm_clkmode_dpll_iva,
-			&iva_dpll_params_1862mhz[sysclk_ind], DPLL_LOCK);
+	params = get_iva_dpll_params();
+	do_setup_dpll(&prcm->cm_clkmode_dpll_iva, params, DPLL_LOCK);
 
 	/*
 	 * USB:
@@ -429,7 +277,7 @@ static void setup_non_essential_dplls(void)
 	 * Use CLKINP in KHz and adjust the denominator accordingly so
 	 * that we have enough accuracy and at the same time no overflow
 	 */
-	params = &usb_dpll_params_1920mhz[sysclk_ind];
+	params = get_usb_dpll_params();
 	num = params->m * sys_clk_khz;
 	den = (params->n + 1) * 250 * 1000;
 	num += den - 1;
@@ -441,11 +289,11 @@ static void setup_non_essential_dplls(void)
 	/* Now setup the dpll with the regular function */
 	do_setup_dpll(&prcm->cm_clkmode_dpll_usb, params, DPLL_LOCK);
 
-#ifdef CONFIG_SYS_OMAP4_ABE_SYSCK
-	params = &abe_dpll_params_sysclk_196608khz[sysclk_ind];
+	/* Configure ABE dpll */
+	params = get_abe_dpll_params();
+#ifdef CONFIG_SYS_OMAP_ABE_SYSCK
 	abe_ref_clk = CM_ABE_PLL_REF_CLKSEL_CLKSEL_SYSCLK;
 #else
-	params = &abe_dpll_params_32k_196608khz;
 	abe_ref_clk = CM_ABE_PLL_REF_CLKSEL_CLKSEL_32KCLK;
 	/*
 	 * We need to enable some additional options to achieve
@@ -470,7 +318,7 @@ static void setup_non_essential_dplls(void)
 	do_setup_dpll(&prcm->cm_clkmode_dpll_abe, params, DPLL_LOCK);
 }
 
-static void do_scale_tps62361(u32 reg, u32 volt_mv)
+void do_scale_tps62361(u32 reg, u32 volt_mv)
 {
 	u32 temp, step;
 
@@ -498,7 +346,7 @@ static void do_scale_tps62361(u32 reg, u32 volt_mv)
 	}
 }
 
-static void do_scale_vcore(u32 vcore_reg, u32 volt_mv)
+void do_scale_vcore(u32 vcore_reg, u32 volt_mv)
 {
 	u32 temp, offset_code;
 	u32 step = 12660; /* 12.66 mV represented in uV */
@@ -530,75 +378,6 @@ static void do_scale_vcore(u32 vcore_reg, u32 volt_mv)
 	}
 }
 
-/*
- * Setup the voltages for vdd_mpu, vdd_core, and vdd_iva
- * We set the maximum voltages allowed here because Smart-Reflex is not
- * enabled in bootloader. Voltage initialization in the kernel will set
- * these to the nominal values after enabling Smart-Reflex
- */
-static void scale_vcores(void)
-{
-	u32 volt, sys_clk_khz, cycles_hi, cycles_low, temp, omap4_rev;
-
-	sys_clk_khz = get_sys_clk_freq() / 1000;
-
-	/*
-	 * Setup the dedicated I2C controller for Voltage Control
-	 * I2C clk - high period 40% low period 60%
-	 */
-	cycles_hi = sys_clk_khz * 4 / PRM_VC_I2C_CHANNEL_FREQ_KHZ / 10;
-	cycles_low = sys_clk_khz * 6 / PRM_VC_I2C_CHANNEL_FREQ_KHZ / 10;
-	/* values to be set in register - less by 5 & 7 respectively */
-	cycles_hi -= 5;
-	cycles_low -= 7;
-	temp = (cycles_hi << PRM_VC_CFG_I2C_CLK_SCLH_SHIFT) |
-	       (cycles_low << PRM_VC_CFG_I2C_CLK_SCLL_SHIFT);
-	writel(temp, &prcm->prm_vc_cfg_i2c_clk);
-
-	/* Disable high speed mode and all advanced features */
-	writel(0x0, &prcm->prm_vc_cfg_i2c_mode);
-
-	omap4_rev = omap_revision();
-	/* TPS - supplies vdd_mpu on 4460 */
-	if (omap4_rev >= OMAP4460_ES1_0) {
-		volt = 1430;
-		do_scale_tps62361(TPS62361_REG_ADDR_SET1, volt);
-	}
-
-	/*
-	 * VCORE 1
-	 *
-	 * 4430 : supplies vdd_mpu
-	 * Setting a high voltage for Nitro mode as smart reflex is not enabled.
-	 * We use the maximum possible value in the AVS range because the next
-	 * higher voltage in the discrete range (code >= 0b111010) is way too
-	 * high
-	 *
-	 * 4460 : supplies vdd_core
-	 */
-	if (omap4_rev < OMAP4460_ES1_0) {
-		volt = 1417;
-		do_scale_vcore(SMPS_REG_ADDR_VCORE1, volt);
-	} else {
-		volt = 1200;
-		do_scale_vcore(SMPS_REG_ADDR_VCORE1, volt);
-	}
-
-	/* VCORE 2 - supplies vdd_iva */
-	volt = 1200;
-	do_scale_vcore(SMPS_REG_ADDR_VCORE2, volt);
-
-	/*
-	 * VCORE 3
-	 * 4430 : supplies vdd_core
-	 * 4460 : not connected
-	 */
-	if (omap4_rev < OMAP4460_ES1_0) {
-		volt = 1200;
-		do_scale_vcore(SMPS_REG_ADDR_VCORE3, volt);
-	}
-}
-
 static inline void enable_clock_domain(u32 *const clkctrl_reg, u32 enable_mode)
 {
 	clrsetbits_le32(clkctrl_reg, CD_CLKCTRL_CLKTRCTRL_MASK,
@@ -635,213 +414,6 @@ static inline void enable_clock_module(u32 *const clkctrl_addr, u32 enable_mode,
 		wait_for_clk_enable(clkctrl_addr);
 }
 
-/*
- * Enable essential clock domains, modules and
- * do some additional special settings needed
- */
-static void enable_basic_clocks(void)
-{
-	u32 i, max = 100, wait_for_enable = 1;
-	u32 *const clk_domains_essential[] = {
-		&prcm->cm_l4per_clkstctrl,
-		&prcm->cm_l3init_clkstctrl,
-		&prcm->cm_memif_clkstctrl,
-		&prcm->cm_l4cfg_clkstctrl,
-		0
-	};
-
-	u32 *const clk_modules_hw_auto_essential[] = {
-		&prcm->cm_wkup_gpio1_clkctrl,
-		&prcm->cm_l4per_gpio2_clkctrl,
-		&prcm->cm_l4per_gpio3_clkctrl,
-		&prcm->cm_l4per_gpio4_clkctrl,
-		&prcm->cm_l4per_gpio5_clkctrl,
-		&prcm->cm_l4per_gpio6_clkctrl,
-		&prcm->cm_memif_emif_1_clkctrl,
-		&prcm->cm_memif_emif_2_clkctrl,
-		&prcm->cm_l3init_hsusbotg_clkctrl,
-		&prcm->cm_l3init_usbphy_clkctrl,
-		&prcm->cm_l4cfg_l4_cfg_clkctrl,
-		0
-	};
-
-	u32 *const clk_modules_explicit_en_essential[] = {
-		&prcm->cm_l4per_gptimer2_clkctrl,
-		&prcm->cm_l3init_hsmmc1_clkctrl,
-		&prcm->cm_l3init_hsmmc2_clkctrl,
-		&prcm->cm_l4per_mcspi1_clkctrl,
-		&prcm->cm_wkup_gptimer1_clkctrl,
-		&prcm->cm_l4per_i2c1_clkctrl,
-		&prcm->cm_l4per_i2c2_clkctrl,
-		&prcm->cm_l4per_i2c3_clkctrl,
-		&prcm->cm_l4per_i2c4_clkctrl,
-		&prcm->cm_wkup_wdtimer2_clkctrl,
-		&prcm->cm_l4per_uart3_clkctrl,
-		0
-	};
-
-	/* Enable optional additional functional clock for GPIO4 */
-	setbits_le32(&prcm->cm_l4per_gpio4_clkctrl,
-			GPIO4_CLKCTRL_OPTFCLKEN_MASK);
-
-	/* Enable 96 MHz clock for MMC1 & MMC2 */
-	setbits_le32(&prcm->cm_l3init_hsmmc1_clkctrl,
-			HSMMC_CLKCTRL_CLKSEL_MASK);
-	setbits_le32(&prcm->cm_l3init_hsmmc2_clkctrl,
-			HSMMC_CLKCTRL_CLKSEL_MASK);
-
-	/* Select 32KHz clock as the source of GPTIMER1 */
-	setbits_le32(&prcm->cm_wkup_gptimer1_clkctrl,
-			GPTIMER1_CLKCTRL_CLKSEL_MASK);
-
-	/* Enable optional 48M functional clock for USB  PHY */
-	setbits_le32(&prcm->cm_l3init_usbphy_clkctrl,
-			USBPHY_CLKCTRL_OPTFCLKEN_PHY_48M_MASK);
-
-	/* Put the clock domains in SW_WKUP mode */
-	for (i = 0; (i < max) && clk_domains_essential[i]; i++) {
-		enable_clock_domain(clk_domains_essential[i],
-				    CD_CLKCTRL_CLKTRCTRL_SW_WKUP);
-	}
-
-	/* Clock modules that need to be put in HW_AUTO */
-	for (i = 0; (i < max) && clk_modules_hw_auto_essential[i]; i++) {
-		enable_clock_module(clk_modules_hw_auto_essential[i],
-				    MODULE_CLKCTRL_MODULEMODE_HW_AUTO,
-				    wait_for_enable);
-	};
-
-	/* Clock modules that need to be put in SW_EXPLICIT_EN mode */
-	for (i = 0; (i < max) && clk_modules_explicit_en_essential[i]; i++) {
-		enable_clock_module(clk_modules_explicit_en_essential[i],
-				    MODULE_CLKCTRL_MODULEMODE_SW_EXPLICIT_EN,
-				    wait_for_enable);
-	};
-
-	/* Put the clock domains in HW_AUTO mode now */
-	for (i = 0; (i < max) && clk_domains_essential[i]; i++) {
-		enable_clock_domain(clk_domains_essential[i],
-				    CD_CLKCTRL_CLKTRCTRL_HW_AUTO);
-	}
-}
-
-/*
- * Enable non-essential clock domains, modules and
- * do some additional special settings needed
- */
-static void enable_non_essential_clocks(void)
-{
-	u32 i, max = 100, wait_for_enable = 0;
-	u32 *const clk_domains_non_essential[] = {
-		&prcm->cm_mpu_m3_clkstctrl,
-		&prcm->cm_ivahd_clkstctrl,
-		&prcm->cm_dsp_clkstctrl,
-		&prcm->cm_dss_clkstctrl,
-		&prcm->cm_sgx_clkstctrl,
-		&prcm->cm1_abe_clkstctrl,
-		&prcm->cm_c2c_clkstctrl,
-		&prcm->cm_cam_clkstctrl,
-		&prcm->cm_dss_clkstctrl,
-		&prcm->cm_sdma_clkstctrl,
-		0
-	};
-
-	u32 *const clk_modules_hw_auto_non_essential[] = {
-		&prcm->cm_mpu_m3_mpu_m3_clkctrl,
-		&prcm->cm_ivahd_ivahd_clkctrl,
-		&prcm->cm_ivahd_sl2_clkctrl,
-		&prcm->cm_dsp_dsp_clkctrl,
-		&prcm->cm_l3_2_gpmc_clkctrl,
-		&prcm->cm_l3instr_l3_3_clkctrl,
-		&prcm->cm_l3instr_l3_instr_clkctrl,
-		&prcm->cm_l3instr_intrconn_wp1_clkctrl,
-		&prcm->cm_l3init_hsi_clkctrl,
-		&prcm->cm_l3init_hsusbtll_clkctrl,
-		0
-	};
-
-	u32 *const clk_modules_explicit_en_non_essential[] = {
-		&prcm->cm1_abe_aess_clkctrl,
-		&prcm->cm1_abe_pdm_clkctrl,
-		&prcm->cm1_abe_dmic_clkctrl,
-		&prcm->cm1_abe_mcasp_clkctrl,
-		&prcm->cm1_abe_mcbsp1_clkctrl,
-		&prcm->cm1_abe_mcbsp2_clkctrl,
-		&prcm->cm1_abe_mcbsp3_clkctrl,
-		&prcm->cm1_abe_slimbus_clkctrl,
-		&prcm->cm1_abe_timer5_clkctrl,
-		&prcm->cm1_abe_timer6_clkctrl,
-		&prcm->cm1_abe_timer7_clkctrl,
-		&prcm->cm1_abe_timer8_clkctrl,
-		&prcm->cm1_abe_wdt3_clkctrl,
-		&prcm->cm_l4per_gptimer9_clkctrl,
-		&prcm->cm_l4per_gptimer10_clkctrl,
-		&prcm->cm_l4per_gptimer11_clkctrl,
-		&prcm->cm_l4per_gptimer3_clkctrl,
-		&prcm->cm_l4per_gptimer4_clkctrl,
-		&prcm->cm_l4per_hdq1w_clkctrl,
-		&prcm->cm_l4per_mcbsp4_clkctrl,
-		&prcm->cm_l4per_mcspi2_clkctrl,
-		&prcm->cm_l4per_mcspi3_clkctrl,
-		&prcm->cm_l4per_mcspi4_clkctrl,
-		&prcm->cm_l4per_mmcsd3_clkctrl,
-		&prcm->cm_l4per_mmcsd4_clkctrl,
-		&prcm->cm_l4per_mmcsd5_clkctrl,
-		&prcm->cm_l4per_uart1_clkctrl,
-		&prcm->cm_l4per_uart2_clkctrl,
-		&prcm->cm_l4per_uart4_clkctrl,
-		&prcm->cm_wkup_keyboard_clkctrl,
-		&prcm->cm_wkup_wdtimer2_clkctrl,
-		&prcm->cm_cam_iss_clkctrl,
-		&prcm->cm_cam_fdif_clkctrl,
-		&prcm->cm_dss_dss_clkctrl,
-		&prcm->cm_sgx_sgx_clkctrl,
-		&prcm->cm_l3init_hsusbhost_clkctrl,
-		&prcm->cm_l3init_fsusb_clkctrl,
-		0
-	};
-
-	/* Enable optional functional clock for ISS */
-	setbits_le32(&prcm->cm_cam_iss_clkctrl, ISS_CLKCTRL_OPTFCLKEN_MASK);
-
-	/* Enable all optional functional clocks of DSS */
-	setbits_le32(&prcm->cm_dss_dss_clkctrl, DSS_CLKCTRL_OPTFCLKEN_MASK);
-
-
-	/* Put the clock domains in SW_WKUP mode */
-	for (i = 0; (i < max) && clk_domains_non_essential[i]; i++) {
-		enable_clock_domain(clk_domains_non_essential[i],
-				    CD_CLKCTRL_CLKTRCTRL_SW_WKUP);
-	}
-
-	/* Clock modules that need to be put in HW_AUTO */
-	for (i = 0; (i < max) && clk_modules_hw_auto_non_essential[i]; i++) {
-		enable_clock_module(clk_modules_hw_auto_non_essential[i],
-				    MODULE_CLKCTRL_MODULEMODE_HW_AUTO,
-				    wait_for_enable);
-	};
-
-	/* Clock modules that need to be put in SW_EXPLICIT_EN mode */
-	for (i = 0; (i < max) && clk_modules_explicit_en_non_essential[i];
-	     i++) {
-		enable_clock_module(clk_modules_explicit_en_non_essential[i],
-				    MODULE_CLKCTRL_MODULEMODE_SW_EXPLICIT_EN,
-				    wait_for_enable);
-	};
-
-	/* Put the clock domains in HW_AUTO mode now */
-	for (i = 0; (i < max) && clk_domains_non_essential[i]; i++) {
-		enable_clock_domain(clk_domains_non_essential[i],
-				    CD_CLKCTRL_CLKTRCTRL_HW_AUTO);
-	}
-
-	/* Put camera module in no sleep mode */
-	clrsetbits_le32(&prcm->cm_cam_clkstctrl, MODULE_CLKCTRL_MODULEMODE_MASK,
-			CD_CLKCTRL_CLKTRCTRL_NO_SLEEP <<
-			MODULE_CLKCTRL_MODULEMODE_SHIFT);
-}
-
-
 void freq_update_core(void)
 {
 	u32 freq_config1 = 0;
@@ -923,6 +495,63 @@ void setup_clocks_for_console(void)
 			CD_CLKCTRL_CLKTRCTRL_SHIFT);
 }
 
+void setup_sri2c(void)
+{
+	u32 sys_clk_khz, cycles_hi, cycles_low, temp;
+
+	sys_clk_khz = get_sys_clk_freq() / 1000;
+
+	/*
+	 * Setup the dedicated I2C controller for Voltage Control
+	 * I2C clk - high period 40% low period 60%
+	 */
+	cycles_hi = sys_clk_khz * 4 / PRM_VC_I2C_CHANNEL_FREQ_KHZ / 10;
+	cycles_low = sys_clk_khz * 6 / PRM_VC_I2C_CHANNEL_FREQ_KHZ / 10;
+	/* values to be set in register - less by 5 & 7 respectively */
+	cycles_hi -= 5;
+	cycles_low -= 7;
+	temp = (cycles_hi << PRM_VC_CFG_I2C_CLK_SCLH_SHIFT) |
+	       (cycles_low << PRM_VC_CFG_I2C_CLK_SCLL_SHIFT);
+	writel(temp, &prcm->prm_vc_cfg_i2c_clk);
+
+	/* Disable high speed mode and all advanced features */
+	writel(0x0, &prcm->prm_vc_cfg_i2c_mode);
+}
+
+void do_enable_clocks(u32 *const *clk_domains,
+			    u32 *const *clk_modules_hw_auto,
+			    u32 *const *clk_modules_explicit_en,
+			    u8 wait_for_enable)
+{
+	u32 i, max = 100;
+
+	/* Put the clock domains in SW_WKUP mode */
+	for (i = 0; (i < max) && clk_domains[i]; i++) {
+		enable_clock_domain(clk_domains[i],
+				    CD_CLKCTRL_CLKTRCTRL_SW_WKUP);
+	}
+
+	/* Clock modules that need to be put in HW_AUTO */
+	for (i = 0; (i < max) && clk_modules_hw_auto[i]; i++) {
+		enable_clock_module(clk_modules_hw_auto[i],
+				    MODULE_CLKCTRL_MODULEMODE_HW_AUTO,
+				    wait_for_enable);
+	};
+
+	/* Clock modules that need to be put in SW_EXPLICIT_EN mode */
+	for (i = 0; (i < max) && clk_modules_explicit_en[i]; i++) {
+		enable_clock_module(clk_modules_explicit_en[i],
+				    MODULE_CLKCTRL_MODULEMODE_SW_EXPLICIT_EN,
+				    wait_for_enable);
+	};
+
+	/* Put the clock domains in HW_AUTO mode now */
+	for (i = 0; (i < max) && clk_domains[i]; i++) {
+		enable_clock_domain(clk_domains[i],
+				    CD_CLKCTRL_CLKTRCTRL_HW_AUTO);
+	}
+}
+
 void prcm_init(void)
 {
 	switch (omap_hw_init_context()) {
diff --git a/arch/arm/cpu/armv7/omap-common/emif-common.c b/arch/arm/cpu/armv7/omap-common/emif-common.c
index 03b45c6..9d82c7c 100644
--- a/arch/arm/cpu/armv7/omap-common/emif-common.c
+++ b/arch/arm/cpu/armv7/omap-common/emif-common.c
@@ -1045,7 +1045,7 @@ static void do_sdram_init(u32 base)
 				&dev_details.cs1_device_timings);
 
 	/* Calculate the register values */
-	emif_calculate_regs(&dev_details, omap4_ddr_clk(), &calculated_regs);
+	emif_calculate_regs(&dev_details, omap_ddr_clk(), &calculated_regs);
 	regs = &calculated_regs;
 #endif /* CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS */
 
diff --git a/arch/arm/cpu/armv7/omap4/Makefile b/arch/arm/cpu/armv7/omap4/Makefile
index 606538b..c7bfa27 100644
--- a/arch/arm/cpu/armv7/omap4/Makefile
+++ b/arch/arm/cpu/armv7/omap4/Makefile
@@ -27,6 +27,7 @@ LIB	=  $(obj)lib$(SOC).o
 
 COBJS	+= sdram_elpida.o
 COBJS	+= hwinit.o
+COBJS	+= clocks.o
 
 SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
 OBJS	:= $(addprefix $(obj),$(COBJS) $(SOBJS))
diff --git a/arch/arm/cpu/armv7/omap4/clocks.c b/arch/arm/cpu/armv7/omap4/clocks.c
new file mode 100644
index 0000000..a1098d4
--- /dev/null
+++ b/arch/arm/cpu/armv7/omap4/clocks.c
@@ -0,0 +1,479 @@
+/*
+ *
+ * Clock initialization for OMAP4
+ *
+ * (C) Copyright 2010
+ * Texas Instruments, <www.ti.com>
+ *
+ * Aneesh V <aneesh at ti.com>
+ *
+ * Based on previous work by:
+ *	Santosh Shilimkar <santosh.shilimkar at ti.com>
+ *	Rajendra Nayak <rnayak at ti.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#include <common.h>
+#include <asm/omap_common.h>
+#include <asm/gpio.h>
+#include <asm/arch/clocks.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/utils.h>
+#include <asm/omap_gpio.h>
+
+#ifndef CONFIG_SPL_BUILD
+/*
+ * printing to console doesn't work unless
+ * this code is executed from SPL
+ */
+#define printf(fmt, args...)
+#define puts(s)
+#endif
+
+#define abs(x) (((x) < 0) ? ((x)*-1) : (x))
+
+struct omap4_prcm_regs *const prcm = (struct omap4_prcm_regs *)0x4A004100;
+
+const u32 sys_clk_array[8] = {
+	12000000,	       /* 12 MHz */
+	13000000,	       /* 13 MHz */
+	16800000,	       /* 16.8 MHz */
+	19200000,	       /* 19.2 MHz */
+	26000000,	       /* 26 MHz */
+	27000000,	       /* 27 MHz */
+	38400000,	       /* 38.4 MHz */
+};
+
+/*
+ * The M & N values in the following tables are created using the
+ * following tool:
+ * tools/omap/clocks_get_m_n.c
+ * Please use this tool for creating the table for any new frequency.
+ */
+
+/* dpll locked at 1840 MHz MPU clk at 920 MHz(OPP Turbo 4460) - DCC OFF */
+static const struct dpll_params mpu_dpll_params_1840mhz[NUM_SYS_CLKS] = {
+	{230, 2, 1, -1, -1, -1, -1, -1},	/* 12 MHz   */
+	{920, 12, 1, -1, -1, -1, -1, -1},	/* 13 MHz   */
+	{219, 3, 1, -1, -1, -1, -1, -1},	/* 16.8 MHz */
+	{575, 11, 1, -1, -1, -1, -1, -1},	/* 19.2 MHz */
+	{460, 12, 1, -1, -1, -1, -1, -1},	/* 26 MHz   */
+	{920, 26, 1, -1, -1, -1, -1, -1},	/* 27 MHz   */
+	{575, 23, 1, -1, -1, -1, -1, -1}	/* 38.4 MHz */
+};
+
+/* dpll locked at 1584 MHz - MPU clk at 792 MHz(OPP Turbo 4430) */
+static const struct dpll_params mpu_dpll_params_1600mhz[NUM_SYS_CLKS] = {
+	{200, 2, 1, -1, -1, -1, -1, -1},	/* 12 MHz   */
+	{800, 12, 1, -1, -1, -1, -1, -1},	/* 13 MHz   */
+	{619, 12, 1, -1, -1, -1, -1, -1},	/* 16.8 MHz */
+	{125, 2, 1, -1, -1, -1, -1, -1},	/* 19.2 MHz */
+	{400, 12, 1, -1, -1, -1, -1, -1},	/* 26 MHz   */
+	{800, 26, 1, -1, -1, -1, -1, -1},	/* 27 MHz   */
+	{125, 5, 1, -1, -1, -1, -1, -1}		/* 38.4 MHz */
+};
+
+/* dpll locked at 1200 MHz - MPU clk at 600 MHz */
+static const struct dpll_params mpu_dpll_params_1200mhz[NUM_SYS_CLKS] = {
+	{50, 0, 1, -1, -1, -1, -1, -1},		/* 12 MHz   */
+	{600, 12, 1, -1, -1, -1, -1, -1},	/* 13 MHz   */
+	{250, 6, 1, -1, -1, -1, -1, -1},	/* 16.8 MHz */
+	{125, 3, 1, -1, -1, -1, -1, -1},	/* 19.2 MHz */
+	{300, 12, 1, -1, -1, -1, -1, -1},	/* 26 MHz   */
+	{200, 8, 1, -1, -1, -1, -1, -1},	/* 27 MHz   */
+	{125, 7, 1, -1, -1, -1, -1, -1}		/* 38.4 MHz */
+};
+
+static const struct dpll_params core_dpll_params_1600mhz[NUM_SYS_CLKS] = {
+	{200, 2, 1, 5, 8, 4, 6, 5},	/* 12 MHz   */
+	{800, 12, 1, 5, 8, 4, 6, 5},	/* 13 MHz   */
+	{619, 12, 1, 5, 8, 4, 6, 5},	/* 16.8 MHz */
+	{125, 2, 1, 5, 8, 4, 6, 5},	/* 19.2 MHz */
+	{400, 12, 1, 5, 8, 4, 6, 5},	/* 26 MHz   */
+	{800, 26, 1, 5, 8, 4, 6, 5},	/* 27 MHz   */
+	{125, 5, 1, 5, 8, 4, 6, 5}	/* 38.4 MHz */
+};
+
+static const struct dpll_params core_dpll_params_es1_1524mhz[NUM_SYS_CLKS] = {
+	{127, 1, 1, 5, 8, 4, 6, 5},	/* 12 MHz   */
+	{762, 12, 1, 5, 8, 4, 6, 5},	/* 13 MHz   */
+	{635, 13, 1, 5, 8, 4, 6, 5},	/* 16.8 MHz */
+	{635, 15, 1, 5, 8, 4, 6, 5},	/* 19.2 MHz */
+	{381, 12, 1, 5, 8, 4, 6, 5},	/* 26 MHz   */
+	{254, 8, 1, 5, 8, 4, 6, 5},	/* 27 MHz   */
+	{496, 24, 1, 5, 8, 4, 6, 5}	/* 38.4 MHz */
+};
+
+static const struct dpll_params
+		core_dpll_params_es2_1600mhz_ddr200mhz[NUM_SYS_CLKS] = {
+	{200, 2, 2, 5, 8, 4, 6, 5},	/* 12 MHz   */
+	{800, 12, 2, 5, 8, 4, 6, 5},	/* 13 MHz   */
+	{619, 12, 2, 5, 8, 4, 6, 5},	/* 16.8 MHz */
+	{125, 2, 2, 5, 8, 4, 6, 5},	/* 19.2 MHz */
+	{400, 12, 2, 5, 8, 4, 6, 5},	/* 26 MHz   */
+	{800, 26, 2, 5, 8, 4, 6, 5},	/* 27 MHz   */
+	{125, 5, 2, 5, 8, 4, 6, 5}	/* 38.4 MHz */
+};
+
+static const struct dpll_params per_dpll_params_1536mhz[NUM_SYS_CLKS] = {
+	{64, 0, 8, 6, 12, 9, 4, 5},	/* 12 MHz   */
+	{768, 12, 8, 6, 12, 9, 4, 5},	/* 13 MHz   */
+	{320, 6, 8, 6, 12, 9, 4, 5},	/* 16.8 MHz */
+	{40, 0, 8, 6, 12, 9, 4, 5},	/* 19.2 MHz */
+	{384, 12, 8, 6, 12, 9, 4, 5},	/* 26 MHz   */
+	{256, 8, 8, 6, 12, 9, 4, 5},	/* 27 MHz   */
+	{20, 0, 8, 6, 12, 9, 4, 5}	/* 38.4 MHz */
+};
+
+static const struct dpll_params iva_dpll_params_1862mhz[NUM_SYS_CLKS] = {
+	{931, 11, -1, -1, 4, 7, -1, -1},	/* 12 MHz   */
+	{931, 12, -1, -1, 4, 7, -1, -1},	/* 13 MHz   */
+	{665, 11, -1, -1, 4, 7, -1, -1},	/* 16.8 MHz */
+	{727, 14, -1, -1, 4, 7, -1, -1},	/* 19.2 MHz */
+	{931, 25, -1, -1, 4, 7, -1, -1},	/* 26 MHz   */
+	{931, 26, -1, -1, 4, 7, -1, -1},	/* 27 MHz   */
+	{412, 16, -1, -1, 4, 7, -1, -1}		/* 38.4 MHz */
+};
+
+/* ABE M & N values with sys_clk as source */
+static const struct dpll_params
+		abe_dpll_params_sysclk_196608khz[NUM_SYS_CLKS] = {
+	{49, 5, 1, 1, -1, -1, -1, -1},	/* 12 MHz   */
+	{68, 8, 1, 1, -1, -1, -1, -1},	/* 13 MHz   */
+	{35, 5, 1, 1, -1, -1, -1, -1},	/* 16.8 MHz */
+	{46, 8, 1, 1, -1, -1, -1, -1},	/* 19.2 MHz */
+	{34, 8, 1, 1, -1, -1, -1, -1},	/* 26 MHz   */
+	{29, 7, 1, 1, -1, -1, -1, -1},	/* 27 MHz   */
+	{64, 24, 1, 1, -1, -1, -1, -1}	/* 38.4 MHz */
+};
+
+/* ABE M & N values with 32K clock as source */
+static const struct dpll_params abe_dpll_params_32k_196608khz = {
+	750, 0, 1, 1, -1, -1, -1, -1
+};
+
+static const struct dpll_params usb_dpll_params_1920mhz[NUM_SYS_CLKS] = {
+	{80, 0, 2, -1, -1, -1, -1, -1},		/* 12 MHz   */
+	{960, 12, 2, -1, -1, -1, -1, -1},	/* 13 MHz   */
+	{400, 6, 2, -1, -1, -1, -1, -1},	/* 16.8 MHz */
+	{50, 0, 2, -1, -1, -1, -1, -1},		/* 19.2 MHz */
+	{480, 12, 2, -1, -1, -1, -1, -1},	/* 26 MHz   */
+	{320, 8, 2, -1, -1, -1, -1, -1},	/* 27 MHz   */
+	{25, 0, 2, -1, -1, -1, -1, -1}		/* 38.4 MHz */
+};
+
+void setup_post_dividers(u32 *const base, const struct dpll_params *params)
+{
+	struct dpll_regs *const dpll_regs = (struct dpll_regs *)base;
+
+	/* Setup post-dividers */
+	if (params->m2 >= 0)
+		writel(params->m2, &dpll_regs->cm_div_m2_dpll);
+	if (params->m3 >= 0)
+		writel(params->m3, &dpll_regs->cm_div_m3_dpll);
+	if (params->m4 >= 0)
+		writel(params->m4, &dpll_regs->cm_div_m4_dpll);
+	if (params->m5 >= 0)
+		writel(params->m5, &dpll_regs->cm_div_m5_dpll);
+	if (params->m6 >= 0)
+		writel(params->m6, &dpll_regs->cm_div_m6_dpll);
+	if (params->m7 >= 0)
+		writel(params->m7, &dpll_regs->cm_div_m7_dpll);
+}
+
+/*
+ * Lock MPU dpll
+ *
+ * Resulting MPU frequencies:
+ * 4430 ES1.0	: 600 MHz
+ * 4430 ES2.x	: 792 MHz (OPP Turbo)
+ * 4460		: 920 MHz (OPP Turbo) - DCC disabled
+ */
+const struct dpll_params *get_mpu_dpll_params(void)
+{
+	u32 omap_rev, sysclk_ind;
+
+	omap_rev = omap_revision();
+	sysclk_ind = get_sys_clk_index();
+
+	if (omap_rev == OMAP4430_ES1_0)
+		return &mpu_dpll_params_1200mhz[sysclk_ind];
+	else if (omap_rev < OMAP4460_ES1_0)
+		return &mpu_dpll_params_1600mhz[sysclk_ind];
+	else
+		return &mpu_dpll_params_1840mhz[sysclk_ind];
+}
+
+const struct dpll_params *get_core_dpll_params(void)
+{
+	u32 sysclk_ind = get_sys_clk_index();
+
+	switch (omap_revision()) {
+	case OMAP4430_ES1_0:
+		return &core_dpll_params_es1_1524mhz[sysclk_ind];
+	case OMAP4430_ES2_0:
+	case OMAP4430_SILICON_ID_INVALID:
+		 /* safest */
+		return &core_dpll_params_es2_1600mhz_ddr200mhz[sysclk_ind];
+	default:
+		return &core_dpll_params_1600mhz[sysclk_ind];
+	}
+}
+
+
+const struct dpll_params *get_per_dpll_params(void)
+{
+	u32 sysclk_ind = get_sys_clk_index();
+	return &per_dpll_params_1536mhz[sysclk_ind];
+}
+
+const struct dpll_params *get_iva_dpll_params(void)
+{
+	u32 sysclk_ind = get_sys_clk_index();
+	return &iva_dpll_params_1862mhz[sysclk_ind];
+}
+
+const struct dpll_params *get_usb_dpll_params(void)
+{
+	u32 sysclk_ind = get_sys_clk_index();
+	return &usb_dpll_params_1920mhz[sysclk_ind];
+}
+
+const struct dpll_params *get_abe_dpll_params(void)
+{
+#ifdef CONFIG_SYS_OMAP_ABE_SYSCK
+	u32 sysclk_ind = get_sys_clk_index();
+	return &abe_dpll_params_sysclk_196608khz[sysclk_ind];
+#else
+	return &abe_dpll_params_32k_196608khz;
+#endif
+}
+
+/*
+ * Setup the voltages for vdd_mpu, vdd_core, and vdd_iva
+ * We set the maximum voltages allowed here because Smart-Reflex is not
+ * enabled in bootloader. Voltage initialization in the kernel will set
+ * these to the nominal values after enabling Smart-Reflex
+ */
+void scale_vcores(void)
+{
+	u32 volt, omap_rev;
+
+	setup_sri2c();
+
+	omap_rev = omap_revision();
+	/* TPS - supplies vdd_mpu on 4460 */
+	if (omap_rev >= OMAP4460_ES1_0) {
+		volt = 1313;
+		do_scale_tps62361(TPS62361_REG_ADDR_SET1, volt);
+	}
+
+	/*
+	 * VCORE 1
+	 *
+	 * 4430 : supplies vdd_mpu
+	 * Setting a high voltage for Nitro mode as smart reflex is not enabled.
+	 * We use the maximum possible value in the AVS range because the next
+	 * higher voltage in the discrete range (code >= 0b111010) is way too
+	 * high
+	 *
+	 * 4460 : supplies vdd_core
+	 */
+	if (omap_rev < OMAP4460_ES1_0) {
+		volt = 1325;
+		do_scale_vcore(SMPS_REG_ADDR_VCORE1, volt);
+	} else {
+		volt = 1200;
+		do_scale_vcore(SMPS_REG_ADDR_VCORE1, volt);
+	}
+
+	/* VCORE 2 - supplies vdd_iva */
+	volt = 1200;
+	do_scale_vcore(SMPS_REG_ADDR_VCORE2, volt);
+
+	/*
+	 * VCORE 3
+	 * 4430 : supplies vdd_core
+	 * 4460 : not connected
+	 */
+	if (omap_rev < OMAP4460_ES1_0) {
+		volt = 1200;
+		do_scale_vcore(SMPS_REG_ADDR_VCORE3, volt);
+	}
+}
+
+/*
+ * Enable essential clock domains, modules and
+ * do some additional special settings needed
+ */
+void enable_basic_clocks(void)
+{
+	u32 *const clk_domains_essential[] = {
+		&prcm->cm_l4per_clkstctrl,
+		&prcm->cm_l3init_clkstctrl,
+		&prcm->cm_memif_clkstctrl,
+		&prcm->cm_l4cfg_clkstctrl,
+		0
+	};
+
+	u32 *const clk_modules_hw_auto_essential[] = {
+		&prcm->cm_wkup_gpio1_clkctrl,
+		&prcm->cm_l4per_gpio2_clkctrl,
+		&prcm->cm_l4per_gpio3_clkctrl,
+		&prcm->cm_l4per_gpio4_clkctrl,
+		&prcm->cm_l4per_gpio5_clkctrl,
+		&prcm->cm_l4per_gpio6_clkctrl,
+		&prcm->cm_memif_emif_1_clkctrl,
+		&prcm->cm_memif_emif_2_clkctrl,
+		&prcm->cm_l3init_hsusbotg_clkctrl,
+		&prcm->cm_l3init_usbphy_clkctrl,
+		&prcm->cm_l4cfg_l4_cfg_clkctrl,
+		0
+	};
+
+	u32 *const clk_modules_explicit_en_essential[] = {
+		&prcm->cm_l4per_gptimer2_clkctrl,
+		&prcm->cm_l3init_hsmmc1_clkctrl,
+		&prcm->cm_l3init_hsmmc2_clkctrl,
+		&prcm->cm_l4per_mcspi1_clkctrl,
+		&prcm->cm_wkup_gptimer1_clkctrl,
+		&prcm->cm_l4per_i2c1_clkctrl,
+		&prcm->cm_l4per_i2c2_clkctrl,
+		&prcm->cm_l4per_i2c3_clkctrl,
+		&prcm->cm_l4per_i2c4_clkctrl,
+		&prcm->cm_wkup_wdtimer2_clkctrl,
+		&prcm->cm_l4per_uart3_clkctrl,
+		0
+	};
+
+	/* Enable optional additional functional clock for GPIO4 */
+	setbits_le32(&prcm->cm_l4per_gpio4_clkctrl,
+			GPIO4_CLKCTRL_OPTFCLKEN_MASK);
+
+	/* Enable 96 MHz clock for MMC1 & MMC2 */
+	setbits_le32(&prcm->cm_l3init_hsmmc1_clkctrl,
+			HSMMC_CLKCTRL_CLKSEL_MASK);
+	setbits_le32(&prcm->cm_l3init_hsmmc2_clkctrl,
+			HSMMC_CLKCTRL_CLKSEL_MASK);
+
+	/* Select 32KHz clock as the source of GPTIMER1 */
+	setbits_le32(&prcm->cm_wkup_gptimer1_clkctrl,
+			GPTIMER1_CLKCTRL_CLKSEL_MASK);
+
+	/* Enable optional 48M functional clock for USB  PHY */
+	setbits_le32(&prcm->cm_l3init_usbphy_clkctrl,
+			USBPHY_CLKCTRL_OPTFCLKEN_PHY_48M_MASK);
+
+	do_enable_clocks(clk_domains_essential,
+			 clk_modules_hw_auto_essential,
+			 clk_modules_explicit_en_essential,
+			 1);
+}
+
+/*
+ * Enable non-essential clock domains, modules and
+ * do some additional special settings needed
+ */
+void enable_non_essential_clocks(void)
+{
+	u32 *const clk_domains_non_essential[] = {
+		&prcm->cm_mpu_m3_clkstctrl,
+		&prcm->cm_ivahd_clkstctrl,
+		&prcm->cm_dsp_clkstctrl,
+		&prcm->cm_dss_clkstctrl,
+		&prcm->cm_sgx_clkstctrl,
+		&prcm->cm1_abe_clkstctrl,
+		&prcm->cm_c2c_clkstctrl,
+		&prcm->cm_cam_clkstctrl,
+		&prcm->cm_dss_clkstctrl,
+		&prcm->cm_sdma_clkstctrl,
+		0
+	};
+
+	u32 *const clk_modules_hw_auto_non_essential[] = {
+		&prcm->cm_mpu_m3_mpu_m3_clkctrl,
+		&prcm->cm_ivahd_ivahd_clkctrl,
+		&prcm->cm_ivahd_sl2_clkctrl,
+		&prcm->cm_dsp_dsp_clkctrl,
+		&prcm->cm_l3_2_gpmc_clkctrl,
+		&prcm->cm_l3instr_l3_3_clkctrl,
+		&prcm->cm_l3instr_l3_instr_clkctrl,
+		&prcm->cm_l3instr_intrconn_wp1_clkctrl,
+		&prcm->cm_l3init_hsi_clkctrl,
+		&prcm->cm_l3init_hsusbtll_clkctrl,
+		0
+	};
+
+	u32 *const clk_modules_explicit_en_non_essential[] = {
+		&prcm->cm1_abe_aess_clkctrl,
+		&prcm->cm1_abe_pdm_clkctrl,
+		&prcm->cm1_abe_dmic_clkctrl,
+		&prcm->cm1_abe_mcasp_clkctrl,
+		&prcm->cm1_abe_mcbsp1_clkctrl,
+		&prcm->cm1_abe_mcbsp2_clkctrl,
+		&prcm->cm1_abe_mcbsp3_clkctrl,
+		&prcm->cm1_abe_slimbus_clkctrl,
+		&prcm->cm1_abe_timer5_clkctrl,
+		&prcm->cm1_abe_timer6_clkctrl,
+		&prcm->cm1_abe_timer7_clkctrl,
+		&prcm->cm1_abe_timer8_clkctrl,
+		&prcm->cm1_abe_wdt3_clkctrl,
+		&prcm->cm_l4per_gptimer9_clkctrl,
+		&prcm->cm_l4per_gptimer10_clkctrl,
+		&prcm->cm_l4per_gptimer11_clkctrl,
+		&prcm->cm_l4per_gptimer3_clkctrl,
+		&prcm->cm_l4per_gptimer4_clkctrl,
+		&prcm->cm_l4per_hdq1w_clkctrl,
+		&prcm->cm_l4per_mcbsp4_clkctrl,
+		&prcm->cm_l4per_mcspi2_clkctrl,
+		&prcm->cm_l4per_mcspi3_clkctrl,
+		&prcm->cm_l4per_mcspi4_clkctrl,
+		&prcm->cm_l4per_mmcsd3_clkctrl,
+		&prcm->cm_l4per_mmcsd4_clkctrl,
+		&prcm->cm_l4per_mmcsd5_clkctrl,
+		&prcm->cm_l4per_uart1_clkctrl,
+		&prcm->cm_l4per_uart2_clkctrl,
+		&prcm->cm_l4per_uart4_clkctrl,
+		&prcm->cm_wkup_keyboard_clkctrl,
+		&prcm->cm_wkup_wdtimer2_clkctrl,
+		&prcm->cm_cam_iss_clkctrl,
+		&prcm->cm_cam_fdif_clkctrl,
+		&prcm->cm_dss_dss_clkctrl,
+		&prcm->cm_sgx_sgx_clkctrl,
+		&prcm->cm_l3init_hsusbhost_clkctrl,
+		&prcm->cm_l3init_fsusb_clkctrl,
+		0
+	};
+
+	/* Enable optional functional clock for ISS */
+	setbits_le32(&prcm->cm_cam_iss_clkctrl, ISS_CLKCTRL_OPTFCLKEN_MASK);
+
+	/* Enable all optional functional clocks of DSS */
+	setbits_le32(&prcm->cm_dss_dss_clkctrl, DSS_CLKCTRL_OPTFCLKEN_MASK);
+
+	do_enable_clocks(clk_domains_non_essential,
+			 clk_modules_hw_auto_non_essential,
+			 clk_modules_explicit_en_non_essential,
+			 0);
+
+	/* Put camera module in no sleep mode */
+	clrsetbits_le32(&prcm->cm_cam_clkstctrl, MODULE_CLKCTRL_MODULEMODE_MASK,
+			CD_CLKCTRL_CLKTRCTRL_NO_SLEEP <<
+			MODULE_CLKCTRL_MODULEMODE_SHIFT);
+}
diff --git a/arch/arm/cpu/armv7/omap5/clocks.c b/arch/arm/cpu/armv7/omap5/clocks.c
new file mode 100644
index 0000000..28d3bcd
--- /dev/null
+++ b/arch/arm/cpu/armv7/omap5/clocks.c
@@ -0,0 +1,412 @@
+/*
+ *
+ * Clock initialization for OMAP5
+ *
+ * (C) Copyright 2010
+ * Texas Instruments, <www.ti.com>
+ *
+ * Aneesh V <aneesh at ti.com>
+ * Sricharan R <r.sricharan at ti.com>
+ *
+ * Based on previous work by:
+ *	Santosh Shilimkar <santosh.shilimkar at ti.com>
+ *	Rajendra Nayak <rnayak at ti.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#include <common.h>
+#include <asm/omap_common.h>
+#include <asm/arch/clocks.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/utils.h>
+#include <asm/omap_gpio.h>
+
+#ifndef CONFIG_SPL_BUILD
+/*
+ * printing to console doesn't work unless
+ * this code is executed from SPL
+ */
+#define printf(fmt, args...)
+#define puts(s)
+#endif
+
+struct omap5_prcm_regs *const prcm = (struct omap5_prcm_regs *)0x4A004100;
+
+const u32 sys_clk_array[8] = {
+	12000000,	       /* 12 MHz */
+	0,		       /* NA */
+	16800000,	       /* 16.8 MHz */
+	19200000,	       /* 19.2 MHz */
+	26000000,	       /* 26 MHz */
+	0,		       /* NA */
+	38400000,	       /* 38.4 MHz */
+};
+
+static const struct dpll_params mpu_dpll_params_1_5ghz[NUM_SYS_CLKS] = {
+	{125, 0, 1, -1, -1, -1, -1, -1, -1, -1},	/* 12 MHz   */
+	{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 13 MHz   */
+	{625, 6, 1, -1, -1, -1, -1, -1, -1, -1},	/* 16.8 MHz */
+	{625, 7, 1, -1, -1, -1, -1, -1, -1, -1},	/* 19.2 MHz */
+	{750, 12, 1, -1, -1, -1, -1, -1, -1, -1},	/* 26 MHz   */
+	{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 27 MHz   */
+	{625, 15, 1, -1, -1, -1, -1, -1, -1, -1}	/* 38.4 MHz */
+};
+
+static const struct dpll_params mpu_dpll_params_2ghz[NUM_SYS_CLKS] = {
+	{500, 2, 1, -1, -1, -1, -1, -1, -1, -1},	/* 12 MHz   */
+	{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 13 MHz   */
+	{2024, 16, 1, -1, -1, -1, -1, -1, -1, -1},	/* 16.8 MHz */
+	{625, 5, 1, -1, -1, -1, -1, -1, -1, -1},	/* 19.2 MHz */
+	{1000, 12, 1, -1, -1, -1, -1, -1, -1, -1},	/* 26 MHz   */
+	{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 27 MHz   */
+	{625, 11, 1, -1, -1, -1, -1, -1, -1, -1}	/* 38.4 MHz */
+};
+
+static const struct dpll_params mpu_dpll_params_1100mhz[NUM_SYS_CLKS] = {
+	{275, 2, 1, -1, -1, -1, -1, -1, -1, -1},	/* 12 MHz   */
+	{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 13 MHz   */
+	{1375, 20, 1, -1, -1, -1, -1, -1, -1, -1},	/* 16.8 MHz */
+	{1375, 23, 1, -1, -1, -1, -1, -1, -1, -1},	/* 19.2 MHz */
+	{550, 12, 1, -1, -1, -1, -1, -1, -1, -1},	/* 26 MHz   */
+	{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 27 MHz   */
+	{1375, 47, 1, -1, -1, -1, -1, -1, -1, -1}	/* 38.4 MHz */
+};
+
+static const struct dpll_params mpu_dpll_params_550mhz[NUM_SYS_CLKS] = {
+	{275, 2, 2, -1, -1, -1, -1, -1, -1, -1},	/* 12 MHz   */
+	{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 13 MHz   */
+	{1375, 20, 2, -1, -1, -1, -1, -1, -1, -1},	/* 16.8 MHz */
+	{1375, 23, 2, -1, -1, -1, -1, -1, -1, -1},	/* 19.2 MHz */
+	{550, 12, 2, -1, -1, -1, -1, -1, -1, -1},	/* 26 MHz   */
+	{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 27 MHz   */
+	{1375, 47, 2, -1, -1, -1, -1, -1, -1, -1}	/* 38.4 MHz */
+};
+
+static const struct dpll_params
+			core_dpll_params_2128mhz_ddr532[NUM_SYS_CLKS] = {
+	{266, 2, 1, 5, 8, 4, 62, 5, 5, 7},		/* 12 MHz   */
+	{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 13 MHz   */
+	{570, 8, 1, 5, 8, 4, 62, 5, 5, 7},		/* 16.8 MHz */
+	{665, 11, 1, 5, 8, 4, 62, 5, 5, 7},		/* 19.2 MHz */
+	{532, 12, 1, 5, 8, 4, 62, 5, 5, 7},		/* 26 MHz   */
+	{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 27 MHz   */
+	{665, 23, 1, 5, 8, 4, 62, 5, 5, 7}		/* 38.4 MHz */
+};
+
+static const struct dpll_params
+			core_dpll_params_2128mhz_ddr266[NUM_SYS_CLKS] = {
+	{266, 2, 2, 5, 8, 4, 62, 5, 5, 7},		/* 12 MHz   */
+	{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 13 MHz   */
+	{570, 8, 2, 5, 8, 4, 62, 5, 5, 7},		/* 16.8 MHz */
+	{665, 11, 2, 5, 8, 4, 62, 5, 5, 7},		/* 19.2 MHz */
+	{532, 12, 2, 5, 8, 4, 62, 5, 5, 7},		/* 26 MHz   */
+	{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 27 MHz   */
+	{665, 23, 2, 5, 8, 4, 62, 5, 5, 7}		/* 38.4 MHz */
+};
+
+static const struct dpll_params per_dpll_params_768mhz[NUM_SYS_CLKS] = {
+	{32, 0, 4, 3, 6, 4, -1, 2, -1, -1},		/* 12 MHz   */
+	{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 13 MHz   */
+	{160, 6, 4, 3, 6, 4, -1, 2, -1, -1},		/* 16.8 MHz */
+	{20, 0, 4, 3, 6, 4, -1, 2, -1, -1},		/* 19.2 MHz */
+	{192, 12, 4, 3, 6, 4, -1, 2, -1, -1},		/* 26 MHz   */
+	{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 27 MHz   */
+	{10, 0, 4, 3, 6, 4, -1, 2, -1, -1}		/* 38.4 MHz */
+};
+
+static const struct dpll_params iva_dpll_params_2330mhz[NUM_SYS_CLKS] = {
+	{931, 11, -1, -1, 4, 7, -1, -1},	/* 12 MHz   */
+	{931, 12, -1, -1, 4, 7, -1, -1},	/* 13 MHz   */
+	{665, 11, -1, -1, 4, 7, -1, -1},	/* 16.8 MHz */
+	{727, 14, -1, -1, 4, 7, -1, -1},	/* 19.2 MHz */
+	{931, 25, -1, -1, 4, 7, -1, -1},	/* 26 MHz   */
+	{931, 26, -1, -1, 4, 7, -1, -1},	/* 27 MHz   */
+	{412, 16, -1, -1, 4, 7, -1, -1}		/* 38.4 MHz */
+};
+
+/* ABE M & N values with sys_clk as source */
+static const struct dpll_params
+		abe_dpll_params_sysclk_196608khz[NUM_SYS_CLKS] = {
+	{49, 5, 1, 1, -1, -1, -1, -1},	/* 12 MHz   */
+	{68, 8, 1, 1, -1, -1, -1, -1},	/* 13 MHz   */
+	{35, 5, 1, 1, -1, -1, -1, -1},	/* 16.8 MHz */
+	{46, 8, 1, 1, -1, -1, -1, -1},	/* 19.2 MHz */
+	{34, 8, 1, 1, -1, -1, -1, -1},	/* 26 MHz   */
+	{29, 7, 1, 1, -1, -1, -1, -1},	/* 27 MHz   */
+	{64, 24, 1, 1, -1, -1, -1, -1}	/* 38.4 MHz */
+};
+
+/* ABE M & N values with 32K clock as source */
+static const struct dpll_params abe_dpll_params_32k_196608khz = {
+	750, 0, 1, 1, -1, -1, -1, -1
+};
+
+static const struct dpll_params usb_dpll_params_1920mhz[NUM_SYS_CLKS] = {
+	{80, 0, 2, -1, -1, -1, -1, -1},		/* 12 MHz   */
+	{960, 12, 2, -1, -1, -1, -1, -1},	/* 13 MHz   */
+	{400, 6, 2, -1, -1, -1, -1, -1},	/* 16.8 MHz */
+	{50, 0, 2, -1, -1, -1, -1, -1},		/* 19.2 MHz */
+	{480, 12, 2, -1, -1, -1, -1, -1},	/* 26 MHz   */
+	{320, 8, 2, -1, -1, -1, -1, -1},	/* 27 MHz   */
+	{25, 0, 2, -1, -1, -1, -1, -1}		/* 38.4 MHz */
+};
+
+void setup_post_dividers(u32 *const base, const struct dpll_params *params)
+{
+	struct dpll_regs *const dpll_regs = (struct dpll_regs *)base;
+
+	/* Setup post-dividers */
+	if (params->m2 >= 0)
+		writel(params->m2, &dpll_regs->cm_div_m2_dpll);
+	if (params->m3 >= 0)
+		writel(params->m3, &dpll_regs->cm_div_m3_dpll);
+	if (params->h11 >= 0)
+		writel(params->h11, &dpll_regs->cm_div_h11_dpll);
+	if (params->h12 >= 0)
+		writel(params->h12, &dpll_regs->cm_div_h12_dpll);
+	if (params->h13 >= 0)
+		writel(params->h13, &dpll_regs->cm_div_h13_dpll);
+	if (params->h14 >= 0)
+		writel(params->h14, &dpll_regs->cm_div_h14_dpll);
+	if (params->h22 >= 0)
+		writel(params->h22, &dpll_regs->cm_div_h22_dpll);
+	if (params->h23 >= 0)
+		writel(params->h23, &dpll_regs->cm_div_h23_dpll);
+}
+
+const struct dpll_params *get_mpu_dpll_params(void)
+{
+	u32 sysclk_ind = get_sys_clk_index();
+	return &mpu_dpll_params_1100mhz[sysclk_ind];
+}
+
+const struct dpll_params *get_core_dpll_params(void)
+{
+	u32 sysclk_ind = get_sys_clk_index();
+
+	/* Configuring the DDR to be at 532mhz */
+	return &core_dpll_params_2128mhz_ddr266[sysclk_ind];
+
+}
+
+const struct dpll_params *get_per_dpll_params(void)
+{
+	u32 sysclk_ind = get_sys_clk_index();
+	return &per_dpll_params_768mhz[sysclk_ind];
+}
+
+const struct dpll_params *get_iva_dpll_params(void)
+{
+	u32 sysclk_ind = get_sys_clk_index();
+	return &iva_dpll_params_2330mhz[sysclk_ind];
+}
+
+const struct dpll_params *get_usb_dpll_params(void)
+{
+	u32 sysclk_ind = get_sys_clk_index();
+	return &usb_dpll_params_1920mhz[sysclk_ind];
+}
+
+const struct dpll_params *get_abe_dpll_params(void)
+{
+#ifdef CONFIG_SYS_OMAP_ABE_SYSCK
+	u32 sysclk_ind = get_sys_clk_index();
+	return &abe_dpll_params_sysclk_196608khz[sysclk_ind];
+#else
+	return &abe_dpll_params_32k_196608khz;
+#endif
+}
+
+/*
+ * Setup the voltages for vdd_mpu, vdd_core, and vdd_iva
+ * We set the maximum voltages allowed here because Smart-Reflex is not
+ * enabled in bootloader. Voltage initialization in the kernel will set
+ * these to the nominal values after enabling Smart-Reflex
+ */
+void scale_vcores(void)
+{
+	u32 volt;
+
+	setup_sri2c();
+
+	/* Enable 1.22V from TPS for vdd_mpu */
+	volt = 1220;
+	do_scale_tps62361(TPS62361_REG_ADDR_SET1, volt);
+
+	/* VCORE 1 - for vdd_core */
+	volt = 1000;
+	do_scale_vcore(SMPS_REG_ADDR_VCORE1, volt);
+
+	/* VCORE 2 - for vdd_MM */
+	volt = 1125;
+	do_scale_vcore(SMPS_REG_ADDR_VCORE2, volt);
+}
+
+/*
+ * Enable essential clock domains, modules and
+ * do some additional special settings needed
+ */
+void enable_basic_clocks(void)
+{
+	u32 *const clk_domains_essential[] = {
+		&prcm->cm_l4per_clkstctrl,
+		&prcm->cm_l3init_clkstctrl,
+		&prcm->cm_memif_clkstctrl,
+		&prcm->cm_l4cfg_clkstctrl,
+		0
+	};
+
+	u32 *const clk_modules_hw_auto_essential[] = {
+		&prcm->cm_wkup_gpio1_clkctrl,
+		&prcm->cm_l4per_gpio2_clkctrl,
+		&prcm->cm_l4per_gpio3_clkctrl,
+		&prcm->cm_l4per_gpio4_clkctrl,
+		&prcm->cm_l4per_gpio5_clkctrl,
+		&prcm->cm_l4per_gpio6_clkctrl,
+		&prcm->cm_memif_emif_1_clkctrl,
+		&prcm->cm_memif_emif_2_clkctrl,
+		&prcm->cm_l4cfg_l4_cfg_clkctrl,
+		0
+	};
+
+	u32 *const clk_modules_explicit_en_essential[] = {
+		&prcm->cm_l4per_gptimer2_clkctrl,
+		&prcm->cm_l3init_hsmmc1_clkctrl,
+		&prcm->cm_l3init_hsmmc2_clkctrl,
+		&prcm->cm_l4per_mcspi1_clkctrl,
+		&prcm->cm_wkup_gptimer1_clkctrl,
+		&prcm->cm_l4per_i2c1_clkctrl,
+		&prcm->cm_l4per_i2c2_clkctrl,
+		&prcm->cm_l4per_i2c3_clkctrl,
+		&prcm->cm_l4per_i2c4_clkctrl,
+		&prcm->cm_wkup_wdtimer2_clkctrl,
+		&prcm->cm_l4per_uart3_clkctrl,
+		0
+	};
+
+	/* Enable optional additional functional clock for GPIO4 */
+	setbits_le32(&prcm->cm_l4per_gpio4_clkctrl,
+			GPIO4_CLKCTRL_OPTFCLKEN_MASK);
+
+	/* Enable 96 MHz clock for MMC1 & MMC2 */
+	setbits_le32(&prcm->cm_l3init_hsmmc1_clkctrl,
+			HSMMC_CLKCTRL_CLKSEL_MASK);
+	setbits_le32(&prcm->cm_l3init_hsmmc2_clkctrl,
+			HSMMC_CLKCTRL_CLKSEL_MASK);
+
+	/* Select 32KHz clock as the source of GPTIMER1 */
+	setbits_le32(&prcm->cm_wkup_gptimer1_clkctrl,
+			GPTIMER1_CLKCTRL_CLKSEL_MASK);
+
+	do_enable_clocks(clk_domains_essential,
+			 clk_modules_hw_auto_essential,
+			 clk_modules_explicit_en_essential,
+			 1);
+}
+
+/*
+ * Enable non-essential clock domains, modules and
+ * do some additional special settings needed
+ */
+void enable_non_essential_clocks(void)
+{
+	u32 *const clk_domains_non_essential[] = {
+		&prcm->cm_mpu_m3_clkstctrl,
+		&prcm->cm_ivahd_clkstctrl,
+		&prcm->cm_dsp_clkstctrl,
+		&prcm->cm_dss_clkstctrl,
+		&prcm->cm_sgx_clkstctrl,
+		&prcm->cm1_abe_clkstctrl,
+		&prcm->cm_c2c_clkstctrl,
+		&prcm->cm_cam_clkstctrl,
+		&prcm->cm_dss_clkstctrl,
+		&prcm->cm_sdma_clkstctrl,
+		0
+	};
+
+	u32 *const clk_modules_hw_auto_non_essential[] = {
+		&prcm->cm_mpu_m3_mpu_m3_clkctrl,
+		&prcm->cm_ivahd_ivahd_clkctrl,
+		&prcm->cm_ivahd_sl2_clkctrl,
+		&prcm->cm_dsp_dsp_clkctrl,
+		&prcm->cm_l3_2_gpmc_clkctrl,
+		&prcm->cm_l3instr_l3_3_clkctrl,
+		&prcm->cm_l3instr_l3_instr_clkctrl,
+		&prcm->cm_l3instr_intrconn_wp1_clkctrl,
+		&prcm->cm_l3init_hsi_clkctrl,
+		&prcm->cm_l3init_hsusbtll_clkctrl,
+		0
+	};
+
+	u32 *const clk_modules_explicit_en_non_essential[] = {
+		&prcm->cm1_abe_aess_clkctrl,
+		&prcm->cm1_abe_pdm_clkctrl,
+		&prcm->cm1_abe_dmic_clkctrl,
+		&prcm->cm1_abe_mcasp_clkctrl,
+		&prcm->cm1_abe_mcbsp1_clkctrl,
+		&prcm->cm1_abe_mcbsp2_clkctrl,
+		&prcm->cm1_abe_mcbsp3_clkctrl,
+		&prcm->cm1_abe_slimbus_clkctrl,
+		&prcm->cm1_abe_timer5_clkctrl,
+		&prcm->cm1_abe_timer6_clkctrl,
+		&prcm->cm1_abe_timer7_clkctrl,
+		&prcm->cm1_abe_timer8_clkctrl,
+		&prcm->cm1_abe_wdt3_clkctrl,
+		&prcm->cm_l4per_gptimer9_clkctrl,
+		&prcm->cm_l4per_gptimer10_clkctrl,
+		&prcm->cm_l4per_gptimer11_clkctrl,
+		&prcm->cm_l4per_gptimer3_clkctrl,
+		&prcm->cm_l4per_gptimer4_clkctrl,
+		&prcm->cm_l4per_hdq1w_clkctrl,
+		&prcm->cm_l4per_mcspi2_clkctrl,
+		&prcm->cm_l4per_mcspi3_clkctrl,
+		&prcm->cm_l4per_mcspi4_clkctrl,
+		&prcm->cm_l4per_mmcsd3_clkctrl,
+		&prcm->cm_l4per_mmcsd4_clkctrl,
+		&prcm->cm_l4per_mmcsd5_clkctrl,
+		&prcm->cm_l4per_uart1_clkctrl,
+		&prcm->cm_l4per_uart2_clkctrl,
+		&prcm->cm_l4per_uart4_clkctrl,
+		&prcm->cm_wkup_keyboard_clkctrl,
+		&prcm->cm_wkup_wdtimer2_clkctrl,
+		&prcm->cm_cam_iss_clkctrl,
+		&prcm->cm_cam_fdif_clkctrl,
+		&prcm->cm_dss_dss_clkctrl,
+		&prcm->cm_sgx_sgx_clkctrl,
+		&prcm->cm_l3init_hsusbhost_clkctrl,
+		&prcm->cm_l3init_fsusb_clkctrl,
+		0
+	};
+
+	/* Enable optional functional clock for ISS */
+	setbits_le32(&prcm->cm_cam_iss_clkctrl, ISS_CLKCTRL_OPTFCLKEN_MASK);
+
+	/* Enable all optional functional clocks of DSS */
+	setbits_le32(&prcm->cm_dss_dss_clkctrl, DSS_CLKCTRL_OPTFCLKEN_MASK);
+
+	do_enable_clocks(clk_domains_non_essential,
+			 clk_modules_hw_auto_non_essential,
+			 clk_modules_explicit_en_non_essential,
+			 0);
+
+	/* Put camera module in no sleep mode */
+	clrsetbits_le32(&prcm->cm_cam_clkstctrl, MODULE_CLKCTRL_MODULEMODE_MASK,
+			CD_CLKCTRL_CLKTRCTRL_NO_SLEEP <<
+			MODULE_CLKCTRL_MODULEMODE_SHIFT);
+}
diff --git a/arch/arm/include/asm/arch-omap4/clocks.h b/arch/arm/include/asm/arch-omap4/clocks.h
index 45c947d..ba52574 100644
--- a/arch/arm/include/asm/arch-omap4/clocks.h
+++ b/arch/arm/include/asm/arch-omap4/clocks.h
@@ -687,4 +687,26 @@ struct dpll_params {
 	s8 m7;
 };
 
+extern struct omap4_prcm_regs *const prcm;
+extern const u32 sys_clk_array[8];
+
+void scale_vcores(void);
+void do_scale_tps62361(u32 reg, u32 volt_mv);
+u32 omap_ddr_clk(void);
+void do_scale_vcore(u32 vcore_reg, u32 volt_mv);
+void setup_sri2c(void);
+void setup_post_dividers(u32 *const base, const struct dpll_params *params);
+u32 get_sys_clk_index(void);
+void enable_basic_clocks(void);
+void enable_non_essential_clocks(void);
+void do_enable_clocks(u32 *const *clk_domains,
+		      u32 *const *clk_modules_hw_auto,
+		      u32 *const *clk_modules_explicit_en,
+		      u8 wait_for_enable);
+const struct dpll_params *get_mpu_dpll_params(void);
+const struct dpll_params *get_core_dpll_params(void);
+const struct dpll_params *get_per_dpll_params(void);
+const struct dpll_params *get_iva_dpll_params(void);
+const struct dpll_params *get_usb_dpll_params(void);
+const struct dpll_params *get_abe_dpll_params(void);
 #endif /* _CLOCKS_OMAP4_H_ */
diff --git a/arch/arm/include/asm/arch-omap4/sys_proto.h b/arch/arm/include/asm/arch-omap4/sys_proto.h
index 4f23687..b8113e1 100644
--- a/arch/arm/include/asm/arch-omap4/sys_proto.h
+++ b/arch/arm/include/asm/arch-omap4/sys_proto.h
@@ -32,8 +32,6 @@ struct omap_sysinfo {
 };
 extern const struct omap_sysinfo sysinfo;
 
-extern struct omap4_prcm_regs *const prcm;
-
 void gpmc_init(void);
 void watchdog_init(void);
 u32 get_device_type(void);
diff --git a/arch/arm/include/asm/arch-omap5/clocks.h b/arch/arm/include/asm/arch-omap5/clocks.h
new file mode 100644
index 0000000..edcc9e9
--- /dev/null
+++ b/arch/arm/include/asm/arch-omap5/clocks.h
@@ -0,0 +1,721 @@
+/*
+ * (C) Copyright 2010
+ * Texas Instruments, <www.ti.com>
+ *
+ *	Aneesh V <aneesh at ti.com>
+ *	Sricharan R <r.sricharan at ti.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#ifndef _CLOCKS_OMAP5_H_
+#define _CLOCKS_OMAP5_H_
+#include <common.h>
+
+/*
+ * Assuming a maximum of 1.5 GHz ARM speed and a minimum of 2 cycles per
+ * loop, allow for a minimum of 2 ms wait (in reality the wait will be
+ * much more than that)
+ */
+#define LDELAY		1000000
+
+#define CM_CLKMODE_DPLL_CORE		(OMAP54XX_L4_CORE_BASE + 0x4120)
+#define CM_CLKMODE_DPLL_PER		(OMAP54XX_L4_CORE_BASE + 0x8140)
+#define CM_CLKMODE_DPLL_MPU		(OMAP54XX_L4_CORE_BASE + 0x4160)
+#define CM_CLKSEL_CORE			(OMAP54XX_L4_CORE_BASE + 0x4100)
+
+struct omap5_prcm_regs {
+	/* cm1.ckgen */
+	u32 cm_clksel_core;			/* 4a004100 */
+	u32 pad001[1];				/* 4a004104 */
+	u32 cm_clksel_abe;			/* 4a004108 */
+	u32 pad002[1];				/* 4a00410c */
+	u32 cm_dll_ctrl;			/* 4a004110 */
+	u32 pad003[3];				/* 4a004114 */
+	u32 cm_clkmode_dpll_core;		/* 4a004120 */
+	u32 cm_idlest_dpll_core;		/* 4a004124 */
+	u32 cm_autoidle_dpll_core;		/* 4a004128 */
+	u32 cm_clksel_dpll_core;		/* 4a00412c */
+	u32 cm_div_m2_dpll_core;		/* 4a004130 */
+	u32 cm_div_m3_dpll_core;		/* 4a004134 */
+	u32 cm_div_h11_dpll_core;		/* 4a004138 */
+	u32 cm_div_h12_dpll_core;		/* 4a00413c */
+	u32 cm_div_h13_dpll_core;		/* 4a004140 */
+	u32 cm_div_h14_dpll_core;		/* 4a004144 */
+	u32 cm_ssc_deltamstep_dpll_core;	/* 4a004148 */
+	u32 cm_ssc_modfreqdiv_dpll_core;	/* 4a00414c */
+	u32 cm_emu_override_dpll_core;		/* 4a004150 */
+
+	u32 cm_div_h22_dpllcore;		/* 4a004154 */
+	u32 cm_div_h23_dpll_core;		/* 4a004158 */
+	u32 pad0041[1];				/* 4a00415c */
+	u32 cm_clkmode_dpll_mpu;		/* 4a004160 */
+	u32 cm_idlest_dpll_mpu;			/* 4a004164 */
+	u32 cm_autoidle_dpll_mpu;		/* 4a004168 */
+	u32 cm_clksel_dpll_mpu;			/* 4a00416c */
+	u32 cm_div_m2_dpll_mpu;			/* 4a004170 */
+	u32 pad005[5];				/* 4a004174 */
+	u32 cm_ssc_deltamstep_dpll_mpu;		/* 4a004188 */
+	u32 cm_ssc_modfreqdiv_dpll_mpu;		/* 4a00418c */
+	u32 pad006[3];				/* 4a004190 */
+	u32 cm_bypclk_dpll_mpu;			/* 4a00419c */
+	u32 cm_clkmode_dpll_iva;		/* 4a0041a0 */
+	u32 cm_idlest_dpll_iva;			/* 4a0041a4 */
+	u32 cm_autoidle_dpll_iva;		/* 4a0041a8 */
+	u32 cm_clksel_dpll_iva;			/* 4a0041ac */
+	u32 pad007[2];				/* 4a0041b0 */
+	u32 cm_div_h11_dpll_iva;		/* 4a0041b8 */
+	u32 cm_div_h12_dpll_iva;		/* 4a0041bc */
+	u32 pad008[2];				/* 4a0041c0 */
+	u32 cm_ssc_deltamstep_dpll_iva;		/* 4a0041c8 */
+	u32 cm_ssc_modfreqdiv_dpll_iva;		/* 4a0041cc */
+	u32 pad009[3];				/* 4a0041d0 */
+	u32 cm_bypclk_dpll_iva;			/* 4a0041dc */
+	u32 cm_clkmode_dpll_abe;		/* 4a0041e0 */
+	u32 cm_idlest_dpll_abe;			/* 4a0041e4 */
+	u32 cm_autoidle_dpll_abe;		/* 4a0041e8 */
+	u32 cm_clksel_dpll_abe;			/* 4a0041ec */
+	u32 cm_div_m2_dpll_abe;			/* 4a0041f0 */
+	u32 cm_div_m3_dpll_abe;			/* 4a0041f4 */
+	u32 pad010[4];				/* 4a0041f8 */
+	u32 cm_ssc_deltamstep_dpll_abe;		/* 4a004208 */
+	u32 cm_ssc_modfreqdiv_dpll_abe;		/* 4a00420c */
+	u32 pad011[4];				/* 4a004210 */
+	u32 cm_clkmode_dpll_ddrphy;		/* 4a004220 */
+	u32 cm_idlest_dpll_ddrphy;		/* 4a004224 */
+	u32 cm_autoidle_dpll_ddrphy;		/* 4a004228 */
+	u32 cm_clksel_dpll_ddrphy;		/* 4a00422c */
+	u32 cm_div_m2_dpll_ddrphy;		/* 4a004230 */
+	u32 pad012[1];				/* 4a004234 */
+	u32 cm_div_h11_dpll_ddrphy;		/* 4a004238 */
+	u32 cm_div_h12_dpll_ddrphy;		/* 4a00423c */
+	u32 cm_div_h13_dpll_ddrphy;		/* 4a004240 */
+	u32 pad013[1];				/* 4a004244 */
+	u32 cm_ssc_deltamstep_dpll_ddrphy;	/* 4a004248 */
+	u32 pad014[5];				/* 4a00424c */
+	u32 cm_shadow_freq_config1;		/* 4a004260 */
+	u32 pad0141[47];			/* 4a004264 */
+	u32 cm_mpu_mpu_clkctrl;			/* 4a004320 */
+
+
+	/* cm1.dsp */
+	u32 pad015[55];				/* 4a004324 */
+	u32 cm_dsp_clkstctrl;			/* 4a004400 */
+	u32 pad016[7];				/* 4a004404 */
+	u32 cm_dsp_dsp_clkctrl;			/* 4a004420 */
+
+	/* cm1.abe */
+	u32 pad017[55];				/* 4a004424 */
+	u32 cm1_abe_clkstctrl;			/* 4a004500 */
+	u32 pad018[7];				/* 4a004504 */
+	u32 cm1_abe_l4abe_clkctrl;		/* 4a004520 */
+	u32 pad019[1];				/* 4a004524 */
+	u32 cm1_abe_aess_clkctrl;		/* 4a004528 */
+	u32 pad020[1];				/* 4a00452c */
+	u32 cm1_abe_pdm_clkctrl;		/* 4a004530 */
+	u32 pad021[1];				/* 4a004534 */
+	u32 cm1_abe_dmic_clkctrl;		/* 4a004538 */
+	u32 pad022[1];				/* 4a00453c */
+	u32 cm1_abe_mcasp_clkctrl;		/* 4a004540 */
+	u32 pad023[1];				/* 4a004544 */
+	u32 cm1_abe_mcbsp1_clkctrl;		/* 4a004548 */
+	u32 pad024[1];				/* 4a00454c */
+	u32 cm1_abe_mcbsp2_clkctrl;		/* 4a004550 */
+	u32 pad025[1];				/* 4a004554 */
+	u32 cm1_abe_mcbsp3_clkctrl;		/* 4a004558 */
+	u32 pad026[1];				/* 4a00455c */
+	u32 cm1_abe_slimbus_clkctrl;		/* 4a004560 */
+	u32 pad027[1];				/* 4a004564 */
+	u32 cm1_abe_timer5_clkctrl;		/* 4a004568 */
+	u32 pad028[1];				/* 4a00456c */
+	u32 cm1_abe_timer6_clkctrl;		/* 4a004570 */
+	u32 pad029[1];				/* 4a004574 */
+	u32 cm1_abe_timer7_clkctrl;		/* 4a004578 */
+	u32 pad030[1];				/* 4a00457c */
+	u32 cm1_abe_timer8_clkctrl;		/* 4a004580 */
+	u32 pad031[1];				/* 4a004584 */
+	u32 cm1_abe_wdt3_clkctrl;		/* 4a004588 */
+
+	/* cm2.ckgen */
+	u32 pad032[3805];			/* 4a00458c */
+	u32 cm_clksel_mpu_m3_iss_root;		/* 4a008100 */
+	u32 cm_clksel_usb_60mhz;		/* 4a008104 */
+	u32 cm_scale_fclk;			/* 4a008108 */
+	u32 pad033[1];				/* 4a00810c */
+	u32 cm_core_dvfs_perf1;			/* 4a008110 */
+	u32 cm_core_dvfs_perf2;			/* 4a008114 */
+	u32 cm_core_dvfs_perf3;			/* 4a008118 */
+	u32 cm_core_dvfs_perf4;			/* 4a00811c */
+	u32 pad034[1];				/* 4a008120 */
+	u32 cm_core_dvfs_current;		/* 4a008124 */
+	u32 cm_iva_dvfs_perf_tesla;		/* 4a008128 */
+	u32 cm_iva_dvfs_perf_ivahd;		/* 4a00812c */
+	u32 cm_iva_dvfs_perf_abe;		/* 4a008130 */
+	u32 pad035[1];				/* 4a008134 */
+	u32 cm_iva_dvfs_current;		/* 4a008138 */
+	u32 pad036[1];				/* 4a00813c */
+	u32 cm_clkmode_dpll_per;		/* 4a008140 */
+	u32 cm_idlest_dpll_per;			/* 4a008144 */
+	u32 cm_autoidle_dpll_per;		/* 4a008148 */
+	u32 cm_clksel_dpll_per;			/* 4a00814c */
+	u32 cm_div_m2_dpll_per;			/* 4a008150 */
+	u32 cm_div_m3_dpll_per;			/* 4a008154 */
+	u32 cm_div_h11_dpll_per;		/* 4a008158 */
+	u32 cm_div_h12_dpll_per;		/* 4a00815c */
+	u32 pad0361[1];				/* 4a008160 */
+	u32 cm_div_h14_dpll_per;		/* 4a008164 */
+	u32 cm_ssc_deltamstep_dpll_per;		/* 4a008168 */
+	u32 cm_ssc_modfreqdiv_dpll_per;		/* 4a00816c */
+	u32 cm_emu_override_dpll_per;		/* 4a008170 */
+	u32 pad037[3];				/* 4a008174 */
+	u32 cm_clkmode_dpll_usb;		/* 4a008180 */
+	u32 cm_idlest_dpll_usb;			/* 4a008184 */
+	u32 cm_autoidle_dpll_usb;		/* 4a008188 */
+	u32 cm_clksel_dpll_usb;			/* 4a00818c */
+	u32 cm_div_m2_dpll_usb;			/* 4a008190 */
+	u32 pad038[5];				/* 4a008194 */
+	u32 cm_ssc_deltamstep_dpll_usb;		/* 4a0081a8 */
+	u32 cm_ssc_modfreqdiv_dpll_usb;		/* 4a0081ac */
+	u32 pad039[1];				/* 4a0081b0 */
+	u32 cm_clkdcoldo_dpll_usb;		/* 4a0081b4 */
+	u32 pad040[2];				/* 4a0081b8 */
+	u32 cm_clkmode_dpll_unipro;		/* 4a0081c0 */
+	u32 cm_idlest_dpll_unipro;		/* 4a0081c4 */
+	u32 cm_autoidle_dpll_unipro;		/* 4a0081c8 */
+	u32 cm_clksel_dpll_unipro;		/* 4a0081cc */
+	u32 cm_div_m2_dpll_unipro;		/* 4a0081d0 */
+	u32 pad041[5];				/* 4a0081d4 */
+	u32 cm_ssc_deltamstep_dpll_unipro;	/* 4a0081e8 */
+	u32 cm_ssc_modfreqdiv_dpll_unipro;	/* 4a0081ec */
+
+	/* cm2.core */
+	u32 pad0411[324];			/* 4a0081f0 */
+	u32 cm_l3_1_clkstctrl;			/* 4a008700 */
+	u32 pad042[1];				/* 4a008704 */
+	u32 cm_l3_1_dynamicdep;			/* 4a008708 */
+	u32 pad043[5];				/* 4a00870c */
+	u32 cm_l3_1_l3_1_clkctrl;		/* 4a008720 */
+	u32 pad044[55];				/* 4a008724 */
+	u32 cm_l3_2_clkstctrl;			/* 4a008800 */
+	u32 pad045[1];				/* 4a008804 */
+	u32 cm_l3_2_dynamicdep;			/* 4a008808 */
+	u32 pad046[5];				/* 4a00880c */
+	u32 cm_l3_2_l3_2_clkctrl;		/* 4a008820 */
+	u32 pad047[1];				/* 4a008824 */
+	u32 cm_l3_2_gpmc_clkctrl;		/* 4a008828 */
+	u32 pad048[1];				/* 4a00882c */
+	u32 cm_l3_2_ocmc_ram_clkctrl;		/* 4a008830 */
+	u32 pad049[51];				/* 4a008834 */
+	u32 cm_mpu_m3_clkstctrl;		/* 4a008900 */
+	u32 cm_mpu_m3_staticdep;		/* 4a008904 */
+	u32 cm_mpu_m3_dynamicdep;		/* 4a008908 */
+	u32 pad050[5];				/* 4a00890c */
+	u32 cm_mpu_m3_mpu_m3_clkctrl;		/* 4a008920 */
+	u32 pad051[55];				/* 4a008924 */
+	u32 cm_sdma_clkstctrl;			/* 4a008a00 */
+	u32 cm_sdma_staticdep;			/* 4a008a04 */
+	u32 cm_sdma_dynamicdep;			/* 4a008a08 */
+	u32 pad052[5];				/* 4a008a0c */
+	u32 cm_sdma_sdma_clkctrl;		/* 4a008a20 */
+	u32 pad053[55];				/* 4a008a24 */
+	u32 cm_memif_clkstctrl;			/* 4a008b00 */
+	u32 pad054[7];				/* 4a008b04 */
+	u32 cm_memif_dmm_clkctrl;		/* 4a008b20 */
+	u32 pad055[1];				/* 4a008b24 */
+	u32 cm_memif_emif_fw_clkctrl;		/* 4a008b28 */
+	u32 pad056[1];				/* 4a008b2c */
+	u32 cm_memif_emif_1_clkctrl;		/* 4a008b30 */
+	u32 pad057[1];				/* 4a008b34 */
+	u32 cm_memif_emif_2_clkctrl;		/* 4a008b38 */
+	u32 pad058[1];				/* 4a008b3c */
+	u32 cm_memif_dll_clkctrl;		/* 4a008b40 */
+	u32 pad059[3];				/* 4a008b44 */
+	u32 cm_memif_emif_h1_clkctrl;		/* 4a008b50 */
+	u32 pad060[1];				/* 4a008b54 */
+	u32 cm_memif_emif_h2_clkctrl;		/* 4a008b58 */
+	u32 pad061[1];				/* 4a008b5c */
+	u32 cm_memif_dll_h_clkctrl;		/* 4a008b60 */
+	u32 pad062[39];				/* 4a008b64 */
+	u32 cm_c2c_clkstctrl;			/* 4a008c00 */
+	u32 cm_c2c_staticdep;			/* 4a008c04 */
+	u32 cm_c2c_dynamicdep;			/* 4a008c08 */
+	u32 pad063[5];				/* 4a008c0c */
+	u32 cm_c2c_sad2d_clkctrl;		/* 4a008c20 */
+	u32 pad064[1];				/* 4a008c24 */
+	u32 cm_c2c_modem_icr_clkctrl;		/* 4a008c28 */
+	u32 pad065[1];				/* 4a008c2c */
+	u32 cm_c2c_sad2d_fw_clkctrl;		/* 4a008c30 */
+	u32 pad066[51];				/* 4a008c34 */
+	u32 cm_l4cfg_clkstctrl;			/* 4a008d00 */
+	u32 pad067[1];				/* 4a008d04 */
+	u32 cm_l4cfg_dynamicdep;		/* 4a008d08 */
+	u32 pad068[5];				/* 4a008d0c */
+	u32 cm_l4cfg_l4_cfg_clkctrl;		/* 4a008d20 */
+	u32 pad069[1];				/* 4a008d24 */
+	u32 cm_l4cfg_hw_sem_clkctrl;		/* 4a008d28 */
+	u32 pad070[1];				/* 4a008d2c */
+	u32 cm_l4cfg_mailbox_clkctrl;		/* 4a008d30 */
+	u32 pad071[1];				/* 4a008d34 */
+	u32 cm_l4cfg_sar_rom_clkctrl;		/* 4a008d38 */
+	u32 pad072[49];				/* 4a008d3c */
+	u32 cm_l3instr_clkstctrl;		/* 4a008e00 */
+	u32 pad073[7];				/* 4a008e04 */
+	u32 cm_l3instr_l3_3_clkctrl;		/* 4a008e20 */
+	u32 pad074[1];				/* 4a008e24 */
+	u32 cm_l3instr_l3_instr_clkctrl;	/* 4a008e28 */
+	u32 pad075[5];				/* 4a008e2c */
+	u32 cm_l3instr_intrconn_wp1_clkctrl;	/* 4a008e40 */
+
+
+	/* cm2.ivahd */
+	u32 pad076[47];				/* 4a008e44 */
+	u32 cm_ivahd_clkstctrl;			/* 4a008f00 */
+	u32 pad077[7];				/* 4a008f04 */
+	u32 cm_ivahd_ivahd_clkctrl;		/* 4a008f20 */
+	u32 pad078[1];				/* 4a008f24 */
+	u32 cm_ivahd_sl2_clkctrl;		/* 4a008f28 */
+
+	/* cm2.cam */
+	u32 pad079[53];				/* 4a008f2c */
+	u32 cm_cam_clkstctrl;			/* 4a009000 */
+	u32 pad080[7];				/* 4a009004 */
+	u32 cm_cam_iss_clkctrl;			/* 4a009020 */
+	u32 pad081[1];				/* 4a009024 */
+	u32 cm_cam_fdif_clkctrl;		/* 4a009028 */
+
+	/* cm2.dss */
+	u32 pad082[53];				/* 4a00902c */
+	u32 cm_dss_clkstctrl;			/* 4a009100 */
+	u32 pad083[7];				/* 4a009104 */
+	u32 cm_dss_dss_clkctrl;			/* 4a009120 */
+
+	/* cm2.sgx */
+	u32 pad084[55];				/* 4a009124 */
+	u32 cm_sgx_clkstctrl;			/* 4a009200 */
+	u32 pad085[7];				/* 4a009204 */
+	u32 cm_sgx_sgx_clkctrl;			/* 4a009220 */
+
+	/* cm2.l3init */
+	u32 pad086[55];				/* 4a009224 */
+	u32 cm_l3init_clkstctrl;		/* 4a009300 */
+
+	/* cm2.l3init */
+	u32 pad087[9];				/* 4a009304 */
+	u32 cm_l3init_hsmmc1_clkctrl;		/* 4a009328 */
+	u32 pad088[1];				/* 4a00932c */
+	u32 cm_l3init_hsmmc2_clkctrl;		/* 4a009330 */
+	u32 pad089[1];				/* 4a009334 */
+	u32 cm_l3init_hsi_clkctrl;		/* 4a009338 */
+	u32 pad090[7];				/* 4a00933c */
+	u32 cm_l3init_hsusbhost_clkctrl;	/* 4a009358 */
+	u32 pad091[1];				/* 4a00935c */
+	u32 cm_l3init_hsusbotg_clkctrl;		/* 4a009360 */
+	u32 pad092[1];				/* 4a009364 */
+	u32 cm_l3init_hsusbtll_clkctrl;		/* 4a009368 */
+	u32 pad093[3];				/* 4a00936c */
+	u32 cm_l3init_p1500_clkctrl;		/* 4a009378 */
+	u32 pad094[21];				/* 4a00937c */
+	u32 cm_l3init_fsusb_clkctrl;		/* 4a0093d0 */
+	u32 pad095[3];				/* 4a0093d4 */
+	u32 cm_l3init_ocp2scp1_clkctrl;
+
+	/* cm2.l4per */
+	u32 pad096[7];				/* 4a0093e4 */
+	u32 cm_l4per_clkstctrl;			/* 4a009400 */
+	u32 pad097[1];				/* 4a009404 */
+	u32 cm_l4per_dynamicdep;		/* 4a009408 */
+	u32 pad098[5];				/* 4a00940c */
+	u32 cm_l4per_adc_clkctrl;		/* 4a009420 */
+	u32 pad100[1];				/* 4a009424 */
+	u32 cm_l4per_gptimer10_clkctrl;		/* 4a009428 */
+	u32 pad101[1];				/* 4a00942c */
+	u32 cm_l4per_gptimer11_clkctrl;		/* 4a009430 */
+	u32 pad102[1];				/* 4a009434 */
+	u32 cm_l4per_gptimer2_clkctrl;		/* 4a009438 */
+	u32 pad103[1];				/* 4a00943c */
+	u32 cm_l4per_gptimer3_clkctrl;		/* 4a009440 */
+	u32 pad104[1];				/* 4a009444 */
+	u32 cm_l4per_gptimer4_clkctrl;		/* 4a009448 */
+	u32 pad105[1];				/* 4a00944c */
+	u32 cm_l4per_gptimer9_clkctrl;		/* 4a009450 */
+	u32 pad106[1];				/* 4a009454 */
+	u32 cm_l4per_elm_clkctrl;		/* 4a009458 */
+	u32 pad107[1];				/* 4a00945c */
+	u32 cm_l4per_gpio2_clkctrl;		/* 4a009460 */
+	u32 pad108[1];				/* 4a009464 */
+	u32 cm_l4per_gpio3_clkctrl;		/* 4a009468 */
+	u32 pad109[1];				/* 4a00946c */
+	u32 cm_l4per_gpio4_clkctrl;		/* 4a009470 */
+	u32 pad110[1];				/* 4a009474 */
+	u32 cm_l4per_gpio5_clkctrl;		/* 4a009478 */
+	u32 pad111[1];				/* 4a00947c */
+	u32 cm_l4per_gpio6_clkctrl;		/* 4a009480 */
+	u32 pad112[1];				/* 4a009484 */
+	u32 cm_l4per_hdq1w_clkctrl;		/* 4a009488 */
+	u32 pad113[1];				/* 4a00948c */
+	u32 cm_l4per_hecc1_clkctrl;		/* 4a009490 */
+	u32 pad114[1];				/* 4a009494 */
+	u32 cm_l4per_hecc2_clkctrl;		/* 4a009498 */
+	u32 pad115[1];				/* 4a00949c */
+	u32 cm_l4per_i2c1_clkctrl;		/* 4a0094a0 */
+	u32 pad116[1];				/* 4a0094a4 */
+	u32 cm_l4per_i2c2_clkctrl;		/* 4a0094a8 */
+	u32 pad117[1];				/* 4a0094ac */
+	u32 cm_l4per_i2c3_clkctrl;		/* 4a0094b0 */
+	u32 pad118[1];				/* 4a0094b4 */
+	u32 cm_l4per_i2c4_clkctrl;		/* 4a0094b8 */
+	u32 pad119[1];				/* 4a0094bc */
+	u32 cm_l4per_l4per_clkctrl;		/* 4a0094c0 */
+	u32 pad1191[3];				/* 4a0094c4 */
+	u32 cm_l4per_mcasp2_clkctrl;		/* 4a0094d0 */
+	u32 pad120[1];				/* 4a0094d4 */
+	u32 cm_l4per_mcasp3_clkctrl;		/* 4a0094d8 */
+	u32 pad121[3];				/* 4a0094dc */
+	u32 cm_l4per_mgate_clkctrl;		/* 4a0094e8 */
+	u32 pad123[1];				/* 4a0094ec */
+	u32 cm_l4per_mcspi1_clkctrl;		/* 4a0094f0 */
+	u32 pad124[1];				/* 4a0094f4 */
+	u32 cm_l4per_mcspi2_clkctrl;		/* 4a0094f8 */
+	u32 pad125[1];				/* 4a0094fc */
+	u32 cm_l4per_mcspi3_clkctrl;		/* 4a009500 */
+	u32 pad126[1];				/* 4a009504 */
+	u32 cm_l4per_mcspi4_clkctrl;		/* 4a009508 */
+	u32 pad127[1];				/* 4a00950c */
+	u32 cm_l4per_gpio7_clkctrl;		/* 4a009510 */
+	u32 pad1271[1];				/* 4a009514 */
+	u32 cm_l4per_gpio8_clkctrl;		/* 4a009518 */
+	u32 pad1272[1];				/* 4a00951c */
+	u32 cm_l4per_mmcsd3_clkctrl;		/* 4a009520 */
+	u32 pad128[1];				/* 4a009524 */
+	u32 cm_l4per_mmcsd4_clkctrl;		/* 4a009528 */
+	u32 pad129[1];				/* 4a00952c */
+	u32 cm_l4per_msprohg_clkctrl;		/* 4a009530 */
+	u32 pad130[1];				/* 4a009534 */
+	u32 cm_l4per_slimbus2_clkctrl;		/* 4a009538 */
+	u32 pad131[1];				/* 4a00953c */
+	u32 cm_l4per_uart1_clkctrl;		/* 4a009540 */
+	u32 pad132[1];				/* 4a009544 */
+	u32 cm_l4per_uart2_clkctrl;		/* 4a009548 */
+	u32 pad133[1];				/* 4a00954c */
+	u32 cm_l4per_uart3_clkctrl;		/* 4a009550 */
+	u32 pad134[1];				/* 4a009554 */
+	u32 cm_l4per_uart4_clkctrl;		/* 4a009558 */
+	u32 pad135[1];				/* 4a00955c */
+	u32 cm_l4per_mmcsd5_clkctrl;		/* 4a009560 */
+	u32 pad136[1];				/* 4a009564 */
+	u32 cm_l4per_i2c5_clkctrl;		/* 4a009568 */
+	u32 pad1371[1];				/* 4a00956c */
+	u32 cm_l4per_uart5_clkctrl;		/* 4a009570 */
+	u32 pad1372[1];				/* 4a009574 */
+	u32 cm_l4per_uart6_clkctrl;		/* 4a009578 */
+	u32 pad1374[1];				/* 4a00957c */
+	u32 cm_l4sec_clkstctrl;			/* 4a009580 */
+	u32 cm_l4sec_staticdep;			/* 4a009584 */
+	u32 cm_l4sec_dynamicdep;		/* 4a009588 */
+	u32 pad138[5];				/* 4a00958c */
+	u32 cm_l4sec_aes1_clkctrl;		/* 4a0095a0 */
+	u32 pad139[1];				/* 4a0095a4 */
+	u32 cm_l4sec_aes2_clkctrl;		/* 4a0095a8 */
+	u32 pad140[1];				/* 4a0095ac */
+	u32 cm_l4sec_des3des_clkctrl;		/* 4a0095b0 */
+	u32 pad141[1];				/* 4a0095b4 */
+	u32 cm_l4sec_pkaeip29_clkctrl;		/* 4a0095b8 */
+	u32 pad142[1];				/* 4a0095bc */
+	u32 cm_l4sec_rng_clkctrl;		/* 4a0095c0 */
+	u32 pad143[1];				/* 4a0095c4 */
+	u32 cm_l4sec_sha2md51_clkctrl;		/* 4a0095c8 */
+	u32 pad144[3];				/* 4a0095cc */
+	u32 cm_l4sec_cryptodma_clkctrl;		/* 4a0095d8 */
+	u32 pad145[3660425];			/* 4a0095dc */
+
+	/* l4 wkup regs */
+	u32 pad201[6211];			/* 4ae00000 */
+	u32 cm_abe_pll_ref_clksel;		/* 4ae0610c */
+	u32 cm_sys_clksel;			/* 4ae06110 */
+	u32 pad202[1467];			/* 4ae06114 */
+	u32 cm_wkup_clkstctrl;			/* 4ae07800 */
+	u32 pad203[7];				/* 4ae07804 */
+	u32 cm_wkup_l4wkup_clkctrl;		/* 4ae07820 */
+	u32 pad204;				/* 4ae07824 */
+	u32 cm_wkup_wdtimer1_clkctrl;		/* 4ae07828 */
+	u32 pad205;				/* 4ae0782c */
+	u32 cm_wkup_wdtimer2_clkctrl;		/* 4ae07830 */
+	u32 pad206;				/* 4ae07834 */
+	u32 cm_wkup_gpio1_clkctrl;		/* 4ae07838 */
+	u32 pad207;				/* 4ae0783c */
+	u32 cm_wkup_gptimer1_clkctrl;		/* 4ae07840 */
+	u32 pad208;				/* 4ae07844 */
+	u32 cm_wkup_gptimer12_clkctrl;		/* 4ae07848 */
+	u32 pad209;				/* 4ae0784c */
+	u32 cm_wkup_synctimer_clkctrl;		/* 4ae07850 */
+	u32 pad210;				/* 4ae07854 */
+	u32 cm_wkup_usim_clkctrl;		/* 4ae07858 */
+	u32 pad211;				/* 4ae0785c */
+	u32 cm_wkup_sarram_clkctrl;		/* 4ae07860 */
+	u32 pad212[5];				/* 4ae07864 */
+	u32 cm_wkup_keyboard_clkctrl;		/* 4ae07878 */
+	u32 pad213;				/* 4ae0787c */
+	u32 cm_wkup_rtc_clkctrl;		/* 4ae07880 */
+	u32 pad214;				/* 4ae07884 */
+	u32 cm_wkup_bandgap_clkctrl;		/* 4ae07888 */
+	u32 pad215[197];			/* 4ae0788c */
+	u32 prm_vc_val_bypass;			/* 4ae07ba0 */
+	u32 pad216[4];
+	u32 prm_vc_cfg_i2c_mode;		/* 4ae07bb4 */
+	u32 prm_vc_cfg_i2c_clk;			/* 4ae07bb8 */
+};
+
+/* DPLL register offsets */
+#define CM_CLKMODE_DPLL		0
+#define CM_IDLEST_DPLL		0x4
+#define CM_AUTOIDLE_DPLL	0x8
+#define CM_CLKSEL_DPLL		0xC
+
+#define DPLL_CLKOUT_DIV_MASK	0x1F /* post-divider mask */
+
+/* CM_CLKMODE_DPLL */
+#define CM_CLKMODE_DPLL_REGM4XEN_SHIFT		11
+#define CM_CLKMODE_DPLL_REGM4XEN_MASK		(1 << 11)
+#define CM_CLKMODE_DPLL_LPMODE_EN_SHIFT		10
+#define CM_CLKMODE_DPLL_LPMODE_EN_MASK		(1 << 10)
+#define CM_CLKMODE_DPLL_RELOCK_RAMP_EN_SHIFT	9
+#define CM_CLKMODE_DPLL_RELOCK_RAMP_EN_MASK	(1 << 9)
+#define CM_CLKMODE_DPLL_DRIFTGUARD_EN_SHIFT	8
+#define CM_CLKMODE_DPLL_DRIFTGUARD_EN_MASK	(1 << 8)
+#define CM_CLKMODE_DPLL_RAMP_RATE_SHIFT		5
+#define CM_CLKMODE_DPLL_RAMP_RATE_MASK		(0x7 << 5)
+#define CM_CLKMODE_DPLL_EN_SHIFT		0
+#define CM_CLKMODE_DPLL_EN_MASK			(0x7 << 0)
+
+#define CM_CLKMODE_DPLL_DPLL_EN_SHIFT		0
+#define CM_CLKMODE_DPLL_DPLL_EN_MASK		7
+
+#define DPLL_EN_STOP			1
+#define DPLL_EN_MN_BYPASS		4
+#define DPLL_EN_LOW_POWER_BYPASS	5
+#define DPLL_EN_FAST_RELOCK_BYPASS	6
+#define DPLL_EN_LOCK			7
+
+/* CM_IDLEST_DPLL fields */
+#define ST_DPLL_CLK_MASK		1
+
+/* CM_CLKSEL_DPLL */
+#define CM_CLKSEL_DPLL_DPLL_SD_DIV_SHIFT	24
+#define CM_CLKSEL_DPLL_DPLL_SD_DIV_MASK		(0xFF << 24)
+#define CM_CLKSEL_DPLL_M_SHIFT			8
+#define CM_CLKSEL_DPLL_M_MASK			(0x7FF << 8)
+#define CM_CLKSEL_DPLL_N_SHIFT			0
+#define CM_CLKSEL_DPLL_N_MASK			0x7F
+#define CM_CLKSEL_DCC_EN_SHIFT			22
+#define CM_CLKSEL_DCC_EN_MASK			(1 << 22)
+
+#define OMAP4_DPLL_MAX_N	127
+
+/* CM_SYS_CLKSEL */
+#define CM_SYS_CLKSEL_SYS_CLKSEL_MASK	7
+
+/* CM_CLKSEL_CORE */
+#define CLKSEL_CORE_SHIFT	0
+#define CLKSEL_L3_SHIFT		4
+#define CLKSEL_L4_SHIFT		8
+
+#define CLKSEL_CORE_X2_DIV_1	0
+#define CLKSEL_L3_CORE_DIV_2	1
+#define CLKSEL_L4_L3_DIV_2	1
+
+/* CM_ABE_PLL_REF_CLKSEL */
+#define CM_ABE_PLL_REF_CLKSEL_CLKSEL_SHIFT	0
+#define CM_ABE_PLL_REF_CLKSEL_CLKSEL_MASK	1
+#define CM_ABE_PLL_REF_CLKSEL_CLKSEL_SYSCLK	0
+#define CM_ABE_PLL_REF_CLKSEL_CLKSEL_32KCLK	1
+
+/* CM_BYPCLK_DPLL_IVA */
+#define CM_BYPCLK_DPLL_IVA_CLKSEL_SHIFT		0
+#define CM_BYPCLK_DPLL_IVA_CLKSEL_MASK		3
+
+#define DPLL_IVA_CLKSEL_CORE_X2_DIV_2		1
+
+/* CM_SHADOW_FREQ_CONFIG1 */
+#define SHADOW_FREQ_CONFIG1_FREQ_UPDATE_MASK	1
+#define SHADOW_FREQ_CONFIG1_DLL_OVERRIDE_MASK	4
+#define SHADOW_FREQ_CONFIG1_DLL_RESET_MASK	8
+
+#define SHADOW_FREQ_CONFIG1_DPLL_EN_SHIFT	8
+#define SHADOW_FREQ_CONFIG1_DPLL_EN_MASK	(7 << 8)
+
+#define SHADOW_FREQ_CONFIG1_M2_DIV_SHIFT	11
+#define SHADOW_FREQ_CONFIG1_M2_DIV_MASK		(0x1F << 11)
+
+/*CM_<clock_domain>__CLKCTRL */
+#define CD_CLKCTRL_CLKTRCTRL_SHIFT		0
+#define CD_CLKCTRL_CLKTRCTRL_MASK		3
+
+#define CD_CLKCTRL_CLKTRCTRL_NO_SLEEP		0
+#define CD_CLKCTRL_CLKTRCTRL_SW_SLEEP		1
+#define CD_CLKCTRL_CLKTRCTRL_SW_WKUP		2
+#define CD_CLKCTRL_CLKTRCTRL_HW_AUTO		3
+
+
+/* CM_<clock_domain>_<module>_CLKCTRL */
+#define MODULE_CLKCTRL_MODULEMODE_SHIFT		0
+#define MODULE_CLKCTRL_MODULEMODE_MASK		3
+#define MODULE_CLKCTRL_IDLEST_SHIFT		16
+#define MODULE_CLKCTRL_IDLEST_MASK		(3 << 16)
+
+#define MODULE_CLKCTRL_MODULEMODE_SW_DISABLE		0
+#define MODULE_CLKCTRL_MODULEMODE_HW_AUTO		1
+#define MODULE_CLKCTRL_MODULEMODE_SW_EXPLICIT_EN	2
+
+#define MODULE_CLKCTRL_IDLEST_FULLY_FUNCTIONAL	0
+#define MODULE_CLKCTRL_IDLEST_TRANSITIONING	1
+#define MODULE_CLKCTRL_IDLEST_IDLE		2
+#define MODULE_CLKCTRL_IDLEST_DISABLED		3
+
+/* CM_L4PER_GPIO4_CLKCTRL */
+#define GPIO4_CLKCTRL_OPTFCLKEN_MASK		(1 << 8)
+
+/* CM_L3INIT_HSMMCn_CLKCTRL */
+#define HSMMC_CLKCTRL_CLKSEL_MASK		(1 << 24)
+
+/* CM_WKUP_GPTIMER1_CLKCTRL */
+#define GPTIMER1_CLKCTRL_CLKSEL_MASK		(1 << 24)
+
+/* CM_CAM_ISS_CLKCTRL */
+#define ISS_CLKCTRL_OPTFCLKEN_MASK		(1 << 8)
+
+/* CM_DSS_DSS_CLKCTRL */
+#define DSS_CLKCTRL_OPTFCLKEN_MASK		0xF00
+
+/* CM_L3INIT_USBPHY_CLKCTRL */
+#define USBPHY_CLKCTRL_OPTFCLKEN_PHY_48M_MASK	8
+
+/* CM_MPU_MPU_CLKCTRL */
+#define MPU_CLKCTRL_CLKSEL_EMIF_DIV_MODE_SHIFT	24
+#define MPU_CLKCTRL_CLKSEL_EMIF_DIV_MODE_MASK	(1 << 24)
+#define MPU_CLKCTRL_CLKSEL_ABE_DIV_MODE_SHIFT	25
+#define MPU_CLKCTRL_CLKSEL_ABE_DIV_MODE_MASK	(1 << 25)
+
+/* Clock frequencies */
+#define OMAP_SYS_CLK_FREQ_38_4_MHZ	38400000
+#define OMAP_SYS_CLK_IND_38_4_MHZ	6
+#define OMAP_32K_CLK_FREQ		32768
+
+/* PRM_VC_CFG_I2C_CLK */
+#define PRM_VC_CFG_I2C_CLK_SCLH_SHIFT		0
+#define PRM_VC_CFG_I2C_CLK_SCLH_MASK		0xFF
+#define PRM_VC_CFG_I2C_CLK_SCLL_SHIFT		8
+#define PRM_VC_CFG_I2C_CLK_SCLL_MASK		(0xFF << 8)
+
+/* PRM_VC_VAL_BYPASS */
+#define PRM_VC_I2C_CHANNEL_FREQ_KHZ	400
+
+#define PRM_VC_VAL_BYPASS_VALID_BIT	0x1000000
+#define PRM_VC_VAL_BYPASS_SLAVEADDR_SHIFT	0
+#define PRM_VC_VAL_BYPASS_SLAVEADDR_MASK	0x7F
+#define PRM_VC_VAL_BYPASS_REGADDR_SHIFT		8
+#define PRM_VC_VAL_BYPASS_REGADDR_MASK		0xFF
+#define PRM_VC_VAL_BYPASS_DATA_SHIFT		16
+#define PRM_VC_VAL_BYPASS_DATA_MASK		0xFF
+
+/* SMPS */
+#define SMPS_I2C_SLAVE_ADDR	0x12
+#define SMPS_REG_ADDR_VCORE1	0x55
+#define SMPS_REG_ADDR_VCORE2	0x5B
+#define SMPS_REG_ADDR_VCORE3	0x61
+
+#define PHOENIX_SMPS_BASE_VOLT_STD_MODE_UV		607700
+#define PHOENIX_SMPS_BASE_VOLT_STD_MODE_WITH_OFFSET_UV	709000
+
+/* TPS */
+#define TPS62361_I2C_SLAVE_ADDR		0x60
+#define TPS62361_REG_ADDR_SET0		0x0
+#define TPS62361_REG_ADDR_SET1		0x1
+#define TPS62361_REG_ADDR_SET2		0x2
+#define TPS62361_REG_ADDR_SET3		0x3
+#define TPS62361_REG_ADDR_CTRL		0x4
+#define TPS62361_REG_ADDR_TEMP		0x5
+#define TPS62361_REG_ADDR_RMP_CTRL	0x6
+#define TPS62361_REG_ADDR_CHIP_ID	0x8
+#define TPS62361_REG_ADDR_CHIP_ID_2	0x9
+
+#define TPS62361_BASE_VOLT_MV	500
+#define TPS62361_VSEL0_GPIO	7
+
+/* Defines for DPLL setup */
+#define DPLL_LOCKED_FREQ_TOLERANCE_0		0
+#define DPLL_LOCKED_FREQ_TOLERANCE_500_KHZ	500
+#define DPLL_LOCKED_FREQ_TOLERANCE_1_MHZ	1000
+
+#define DPLL_NO_LOCK	0
+#define DPLL_LOCK	1
+
+#define NUM_SYS_CLKS	7
+
+struct dpll_regs {
+	u32 cm_clkmode_dpll;
+	u32 cm_idlest_dpll;
+	u32 cm_autoidle_dpll;
+	u32 cm_clksel_dpll;
+	u32 cm_div_m2_dpll;
+	u32 cm_div_m3_dpll;
+	u32 cm_div_h11_dpll;
+	u32 cm_div_h12_dpll;
+	u32 cm_div_h13_dpll;
+	u32 cm_div_h14_dpll;
+	u32 reserved[2];
+	u32 cm_div_h22_dpll;
+	u32 cm_div_h23_dpll;
+};
+
+/* DPLL parameter table */
+struct dpll_params {
+	u32 m;
+	u32 n;
+	u8 m2;
+	u8 m3;
+	u8 h11;
+	u8 h12;
+	u8 h13;
+	u8 h14;
+	u8 h22;
+	u8 h23;
+};
+
+extern struct omap5_prcm_regs *const prcm;
+extern const u32 sys_clk_array[8];
+
+void scale_vcores(void);
+void do_scale_tps62361(u32 reg, u32 volt_mv);
+u32 omap_ddr_clk(void);
+void do_scale_vcore(u32 vcore_reg, u32 volt_mv);
+void setup_sri2c(void);
+void setup_post_dividers(u32 *const base, const struct dpll_params *params);
+u32 get_sys_clk_index(void);
+void enable_basic_clocks(void);
+void enable_non_essential_clocks(void);
+void do_enable_clocks(u32 *const *clk_domains,
+		      u32 *const *clk_modules_hw_auto,
+		      u32 *const *clk_modules_explicit_en,
+		      u8 wait_for_enable);
+const struct dpll_params *get_mpu_dpll_params(void);
+const struct dpll_params *get_core_dpll_params(void);
+const struct dpll_params *get_per_dpll_params(void);
+const struct dpll_params *get_iva_dpll_params(void);
+const struct dpll_params *get_usb_dpll_params(void);
+const struct dpll_params *get_abe_dpll_params(void);
+#endif /* _CLOCKS_OMAP5_H_ */
diff --git a/arch/arm/include/asm/arch-omap5/sys_proto.h b/arch/arm/include/asm/arch-omap5/sys_proto.h
index fdca765..3803ea9 100644
--- a/arch/arm/include/asm/arch-omap5/sys_proto.h
+++ b/arch/arm/include/asm/arch-omap5/sys_proto.h
@@ -26,14 +26,13 @@
 #include <asm/arch/clocks.h>
 #include <asm/omap_common.h>
 #include <asm/arch/mux_omap5.h>
+#include <asm/arch/clocks.h>
 
 struct omap_sysinfo {
 	char *board_string;
 };
 extern const struct omap_sysinfo sysinfo;
 
-extern struct omap5_prcm_regs *const prcm;
-
 void gpmc_init(void);
 void watchdog_init(void);
 u32 get_device_type(void);
-- 
1.7.1



More information about the U-Boot mailing list