[U-Boot] [PATCH 0/5] mx5: USB host support for mx51evk and mx53loco

Wolfgang Grandegger wg at denx.de
Fri Nov 11 14:03:33 CET 2011


This patches series provides USB host support for the mx51evk and
mx53loco. The generic ehci-mx5 interface is derived from ehci-mxc
and uses the header files of the ehci-fsl interface. The callback
board_ehci_hcd_init() allows to do board-specific setup when USB is
started.

Wolfgang.

Wolfgang Grandegger (5):
  mx5: add helper functions to enable USB clocks
  mx5: add helper function to retrieve the GPIO number
  mx5: add generic USB EHCI support for mx51 and mx53
  mx53loco: add end enable USB host support on port 1
  mx51evk: add end enable USB host support on port 1

 arch/arm/cpu/armv7/mx5/clock.c            |   72 ++++++++++++
 arch/arm/include/asm/arch-mx5/clock.h     |    5 +
 arch/arm/include/asm/arch-mx5/crm_regs.h  |    3 +
 arch/arm/include/asm/arch-mx5/mx5x_pins.h |    4 +
 board/freescale/mx51evk/mx51evk.c         |   92 +++++++++++++++
 board/freescale/mx53loco/mx53loco.c       |   10 ++
 drivers/usb/host/Makefile                 |    1 +
 drivers/usb/host/ehci-mx5.c               |  174 +++++++++++++++++++++++++++++
 include/configs/mx51evk.h                 |   13 ++
 include/configs/mx53loco.h                |   13 ++
 include/usb/ehci-fsl.h                    |   10 ++
 11 files changed, 397 insertions(+), 0 deletions(-)
 create mode 100644 drivers/usb/host/ehci-mx5.c

-- 
1.7.4.1



More information about the U-Boot mailing list