[U-Boot] [PATCH 0/6] i.mx: add the initial i.mx6q core/board support

[Jason Hui]

On Sun, Nov 13, 2011 at 12:10 AM, Dirk Behme <dirk.behme at googlemail.com> wrote:
> On 12.11.2011 11:36, Jason Liu wrote:
>>
>> This patch-set add the initial support for freescale i.mx6q support.
>> freescale i.mx6q is a quad core built on arm cortex_a9 complex.
>>
>> The patch-set has been tested ok on freescale i.mx6q Armadillo2 board and
>> also
>> make sure it does not break i.mx5 support
>>
>> Jason Liu (6):
>>   i.mx: i.mx5: Move some files to imx-common folder
>>   i.mx: Add the initial support for freescale i.MX6Q processor
>
> Hmm, this patch, i.e. patch 2/6, is missing at the mailing list?

Yes, I noticed that it's due to 2/6 is big and not sent successfully
on the mail-list.
I will try to rework it and send it out later.

Jason Liu

>
> Dirk
>
>>   i.mx: mxc_gpio: add the i.mx6q support
>>   i.mx: serial_mxc: add the i.mx6q support
>>   i.mx: fsl_esdhc: add the i.mx6q support
>>   i.mx: i.mx6q: Add the initial support for i.mx6q ARM2 board
>>
>>  MAINTAINERS                                        |    1 +
>>  Makefile                                           |    7 +
>>  arch/arm/cpu/armv7/imx-common/Makefile             |   47 +
>>  arch/arm/cpu/armv7/imx-common/cpu_info.c           |  108 ++
>>  arch/arm/cpu/armv7/{mx5 =>  imx-common}/speed.c     |    0
>>  arch/arm/cpu/armv7/{mx5 =>  imx-common}/timer.c     |   17 +-
>>  arch/arm/cpu/armv7/mx5/Makefile                    |    2 +-
>>  arch/arm/cpu/armv7/mx5/soc.c                       |   77 -
>>  arch/arm/cpu/armv7/mx6/Makefile                    |   48 +
>>  arch/arm/cpu/armv7/mx6/clock.c                     |  388 +++++
>>  arch/arm/cpu/armv7/mx6/iomux-v3.c                  |   76 +
>>  arch/arm/cpu/armv7/mx6/lowlevel_init.S             |   60 +
>>  arch/arm/cpu/armv7/{mx5/speed.c =>  mx6/soc.c}      |   40 +-
>>  arch/arm/include/asm/arch-mx6/ccm_regs.h           |  894 +++++++++++
>>  .../mx5/speed.c =>  include/asm/arch-mx6/clock.h}   |   45 +-
>>  .../mx5/speed.c =>  include/asm/arch-mx6/gpio.h}    |   28 +-
>>  arch/arm/include/asm/arch-mx6/imx-regs.h           |  233 +++
>>  arch/arm/include/asm/arch-mx6/iomux-v3.h           |  104 ++
>>  arch/arm/include/asm/arch-mx6/mx6x_pins.h          | 1683
>> ++++++++++++++++++++
>>  .../speed.c =>  include/asm/arch-mx6/sys_proto.h}   |   31 +-
>>  board/freescale/mx6qarm2/Makefile                  |   48 +
>>  board/freescale/mx6qarm2/imximage.cfg              |  167 ++
>>  board/freescale/mx6qarm2/mx6qarm2.c                |  163 ++
>>  boards.cfg                                         |    1 +
>>  drivers/gpio/mxc_gpio.c                            |    4 +-
>>  drivers/mmc/fsl_esdhc.c                            |   14 +-
>>  drivers/serial/serial_mxc.c                        |   10 +-
>>  include/configs/mx6qarm2.h                         |  163 ++
>>  28 files changed, 4303 insertions(+), 156 deletions(-)
>>  create mode 100644 arch/arm/cpu/armv7/imx-common/Makefile
>>  create mode 100644 arch/arm/cpu/armv7/imx-common/cpu_info.c
>>  copy arch/arm/cpu/armv7/{mx5 =>  imx-common}/speed.c (100%)
>>  rename arch/arm/cpu/armv7/{mx5 =>  imx-common}/timer.c (84%)
>>  mode change 100644 =>  100755
>>  create mode 100644 arch/arm/cpu/armv7/mx6/Makefile
>>  create mode 100644 arch/arm/cpu/armv7/mx6/clock.c
>>  create mode 100644 arch/arm/cpu/armv7/mx6/iomux-v3.c
>>  create mode 100644 arch/arm/cpu/armv7/mx6/lowlevel_init.S
>>  copy arch/arm/cpu/armv7/{mx5/speed.c =>  mx6/soc.c} (57%)
>>  create mode 100644 arch/arm/include/asm/arch-mx6/ccm_regs.h
>>  copy arch/arm/{cpu/armv7/mx5/speed.c =>  include/asm/arch-mx6/clock.h}
>> (59%)
>>  copy arch/arm/{cpu/armv7/mx5/speed.c =>  include/asm/arch-mx6/gpio.h}
>> (65%)
>>  create mode 100644 arch/arm/include/asm/arch-mx6/imx-regs.h
>>  create mode 100644 arch/arm/include/asm/arch-mx6/iomux-v3.h
>>  create mode 100644 arch/arm/include/asm/arch-mx6/mx6x_pins.h
>>  rename arch/arm/{cpu/armv7/mx5/speed.c =>
>>  include/asm/arch-mx6/sys_proto.h} (65%)
>>  create mode 100644 board/freescale/mx6qarm2/Makefile
>>  create mode 100644 board/freescale/mx6qarm2/imximage.cfg
>>  create mode 100644 board/freescale/mx6qarm2/mx6qarm2.c
>>  create mode 100644 include/configs/mx6qarm2.h
>>
>
>