[U-Boot] [PATCH 0/5] mx5: USB host support for mx51evk and mx53loco
Marek Vasut
marek.vasut at gmail.com
Mon Nov 14 11:46:40 CET 2011
> On 11/11/2011 10:44 PM, Marek Vasut wrote:
> >> This patches series provides USB host support for the mx51evk and
> >> mx53loco. The generic ehci-mx5 interface is derived from ehci-mxc
> >> and uses the header files of the ehci-fsl interface. The callback
> >> board_ehci_hcd_init() allows to do board-specific setup when USB is
> >> started.
> >>
> >> Wolfgang.
> >>
> >> Wolfgang Grandegger (5):
> >> mx5: add helper functions to enable USB clocks
> >> mx5: add helper function to retrieve the GPIO number
> >> mx5: add generic USB EHCI support for mx51 and mx53
> >> mx53loco: add end enable USB host support on port 1
> >> mx51evk: add end enable USB host support on port 1
> >>
> >> arch/arm/cpu/armv7/mx5/clock.c | 72 ++++++++++++
> >> arch/arm/include/asm/arch-mx5/clock.h | 5 +
> >> arch/arm/include/asm/arch-mx5/crm_regs.h | 3 +
> >> arch/arm/include/asm/arch-mx5/mx5x_pins.h | 4 +
> >> board/freescale/mx51evk/mx51evk.c | 92 +++++++++++++++
> >> board/freescale/mx53loco/mx53loco.c | 10 ++
> >> drivers/usb/host/Makefile | 1 +
> >> drivers/usb/host/ehci-mx5.c | 174
> >>
> >> +++++++++++++++++++++++++++++ include/configs/mx51evk.h
> >> |
> >>
> >> 13 ++
> >> include/configs/mx53loco.h | 13 ++
> >> include/usb/ehci-fsl.h | 10 ++
> >> 11 files changed, 397 insertions(+), 0 deletions(-)
> >> create mode 100644 drivers/usb/host/ehci-mx5.c
> >
> > Hi,
> >
> > isn't Jana already doing this kind of USB support for mx5 based on my old
> > patches? You didn't notice?
>
> Well, I already responded on Jana's patches and presented my ideas here:
>
> http://marc.info/?l=u-boot&m=132067806107887&w=2
>
> Unfortunately, only the mails with subject "[PATCH] ..." get enough
> attention ;-).
Well aparently she isn't even signed to the ML ... so you need to CC her ... doh
:-/
>
> The big difference to Jana's patch is that he uses a board-specific
> implementation (ehci_hcd_init() is in board specific code). I think we
> should share some code.
Please do.
>
> Wolfgang.
M
More information about the U-Boot
mailing list