[U-Boot] [PATCH 20/20] M28EVK: Enable USB HOST support

[Manojkumar]

Marek Vasut wrote:
>> Marek Vasut wrote:
>>     
>>>> Hi Marek,
>>>>
>>>> u-boot-v2011.09 doesn't support for imx28. I need complete support patch
>>>> for mx28. where can i get those patches?
>>>>
>>>> for which version of u-boot this patches supports..?
>>>>
>>>>
>>>> Regards,
>>>> Manoj
>>>>         
>>> http://git.denx.de/?p=u-boot/u-boot-imx.git;a=summary
>>>
>>> M
>>>       
>> Thanks Marek,
>> Patches applied..
>> on usb start command i'm getting "scanning bus for devices... New Device
>> 0" then its freezes after  getting the debug message
>> "enabling power on all ports
>> usb_control_msg: request: 0x3, requesttype: 0x23, value 0x8 index 0x1
>> length 0x0"
>> can u help me on this further?
>>
>> Regards,
>> Manoj
>>     
>
> There is a mail with subject "[U-Boot] [PATCH] GCC4.6: Fix common/usb.c on 
> xscale" in uboot ML ... apply the patch and retry. What GCC do you use?
>
> M
>
>   
Hello Marek,

I'm using
u-boot version : u-boot-imx

gcc version:4.3.3

When i try to add this Patch "[U-Boot] [PATCH] GCC4.6: Fix common/usb.c 
on xscale"
I'm getting:
patching file usb.c
Hunk #1 FAILED at 263.
Hunk #2 FAILED at 313.
2 out of 2 hunks FAILED -- saving rejects to file usb.c.rej

then i made some changes for common/usb.c as per the patch,even it gets 
freezes after printing the debug msg.
"enabling power on all ports
usb_control_msg: request: 0x3, requesttype: 0x23, value 0x8 index 0x1 
length 0x0"

Regards,
Manoj