[U-Boot] [PATCH] sh: sh_eth: Add support SH7724
Nobuhiro Iwamatsu
nobuhiro.iwamatsu.yj at renesas.com
Tue Nov 15 05:24:00 CET 2011
Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj at renesas.com>
---
drivers/net/sh_eth.c | 42 +++++++++++++++++++++++-------------------
drivers/net/sh_eth.h | 41 +++++++++++++++++++++++++++++++++++++----
2 files changed, 60 insertions(+), 23 deletions(-)
diff --git a/drivers/net/sh_eth.c b/drivers/net/sh_eth.c
index 27d0401..995e249 100644
--- a/drivers/net/sh_eth.c
+++ b/drivers/net/sh_eth.c
@@ -1,8 +1,8 @@
/*
* sh_eth.c - Driver for Renesas SH7763's ethernet controler.
*
- * Copyright (C) 2008 Renesas Solutions Corp.
- * Copyright (c) 2008 Nobuhiro Iwamatsu
+ * Copyright (C) 2008, 2011 Renesas Solutions Corp.
+ * Copyright (c) 2008, 2011 Nobuhiro Iwamatsu
* Copyright (c) 2007 Carlos Munoz <carlos at kenati.com>
*
* This program is free software; you can redistribute it and/or modify
@@ -371,7 +371,7 @@ static int sh_eth_config(struct sh_eth_dev *eth, bd_t *bd)
outl(0, TFTR(port));
outl((FIFO_SIZE_T | FIFO_SIZE_R), FDR(port));
outl(RMCR_RST, RMCR(port));
-#ifndef CONFIG_CPU_SH7757
+#if !defined(CONFIG_CPU_SH7757) && !defined(CONFIG_CPU_SH7724)
outl(0, RPADIR(port));
#endif
outl((FIFO_F_D_RFF | FIFO_F_D_RFD), FCFTR(port));
@@ -393,16 +393,19 @@ static int sh_eth_config(struct sh_eth_dev *eth, bd_t *bd)
outl(val, MALR(port));
outl(RFLR_RFL_MIN, RFLR(port));
-#ifndef CONFIG_CPU_SH7757
+#if !defined(CONFIG_CPU_SH7757) && !defined(CONFIG_CPU_SH7724)
outl(0, PIPR(port));
#endif
+#if !defined(CONFIG_CPU_SH7724)
outl(APR_AP, APR(port));
outl(MPR_MP, MPR(port));
-#ifdef CONFIG_CPU_SH7757
- outl(TPAUSER_UNLIMITED, TPAUSER(port));
-#else
+#endif
+#if defined(CONFIG_CPU_SH7763)
outl(TPAUSER_TPAUSE, TPAUSER(port));
+#elif defined(CONFIG_CPU_SH7757)
+ outl(TPAUSER_UNLIMITED, TPAUSER(port));
#endif
+
/* Configure phy */
ret = sh_eth_phy_config(eth);
if (ret) {
@@ -412,33 +415,34 @@ static int sh_eth_config(struct sh_eth_dev *eth, bd_t *bd)
phy = port_info->phydev;
phy_startup(phy);
+ val = 0;
+
/* Set the transfer speed */
-#ifdef CONFIG_CPU_SH7763
if (phy->speed == 100) {
printf(SHETHER_NAME ": 100Base/");
+#ifdef CONFIG_CPU_SH7763
outl(GECMR_100B, GECMR(port));
+#elif defined(CONFIG_CPU_SH7757)
+ outl(1, RTRATE(port));
+#elif defined(CONFIG_CPU_SH7724)
+ val = ECMR_RTM;
+#endif
} else if (phy->speed == 10) {
printf(SHETHER_NAME ": 10Base/");
+#ifdef CONFIG_CPU_SH7763
outl(GECMR_10B, GECMR(port));
- }
-#endif
-#if defined(CONFIG_CPU_SH7757)
- if (phy->speed == 100) {
- printf("100Base/");
- outl(1, RTRATE(port));
- } else if (phy->speed == 10) {
- printf("10Base/");
+#elif defined(CONFIG_CPU_SH7757)
outl(0, RTRATE(port));
- }
#endif
+ }
/* Check if full duplex mode is supported by the phy */
if (phy->duplex) {
printf("Full\n");
- outl((ECMR_CHG_DM|ECMR_RE|ECMR_TE|ECMR_DM), ECMR(port));
+ outl(val | (ECMR_CHG_DM|ECMR_RE|ECMR_TE|ECMR_DM), ECMR(port));
} else {
printf("Half\n");
- outl((ECMR_CHG_DM|ECMR_RE|ECMR_TE), ECMR(port));
+ outl(val | (ECMR_CHG_DM|ECMR_RE|ECMR_TE), ECMR(port));
}
return ret;
diff --git a/drivers/net/sh_eth.h b/drivers/net/sh_eth.h
index dd6a422..589cc11 100644
--- a/drivers/net/sh_eth.h
+++ b/drivers/net/sh_eth.h
@@ -1,8 +1,8 @@
/*
* sh_eth.h - Driver for Renesas SuperH ethernet controler.
*
- * Copyright (C) 2008 Renesas Solutions Corp.
- * Copyright (c) 2008 Nobuhiro Iwamatsu
+ * Copyright (C) 2008, 2011 Renesas Solutions Corp.
+ * Copyright (c) 2008, 2011 Nobuhiro Iwamatsu
* Copyright (c) 2007 Carlos Munoz <carlos at kenati.com>
*
* This program is free software; you can redistribute it and/or modify
@@ -162,6 +162,32 @@ struct sh_eth_dev {
#define MAHR(port) (BASE_IO_ADDR + 0x800 * (port) + 0x01c0)
#define MALR(port) (BASE_IO_ADDR + 0x800 * (port) + 0x01c8)
#define RTRATE(port) (BASE_IO_ADDR + 0x800 * (port) + 0x01fc)
+
+#elif defined(CONFIG_CPU_SH7724)
+#define BASE_IO_ADDR 0xA4600000
+
+#define TDLAR(port) (BASE_IO_ADDR + 0x0018)
+#define RDLAR(port) (BASE_IO_ADDR + 0x0020)
+
+#define EDMR(port) (BASE_IO_ADDR + 0x0000)
+#define EDTRR(port) (BASE_IO_ADDR + 0x0008)
+#define EDRRR(port) (BASE_IO_ADDR + 0x0010)
+#define EESR(port) (BASE_IO_ADDR + 0x0028)
+#define EESIPR(port) (BASE_IO_ADDR + 0x0030)
+#define TRSCER(port) (BASE_IO_ADDR + 0x0038)
+#define TFTR(port) (BASE_IO_ADDR + 0x0048)
+#define FDR(port) (BASE_IO_ADDR + 0x0050)
+#define RMCR(port) (BASE_IO_ADDR + 0x0058)
+#define FCFTR(port) (BASE_IO_ADDR + 0x0070)
+#define ECMR(port) (BASE_IO_ADDR + 0x0100)
+#define RFLR(port) (BASE_IO_ADDR + 0x0108)
+#define ECSIPR(port) (BASE_IO_ADDR + 0x0118)
+#define PIR(port) (BASE_IO_ADDR + 0x0120)
+#define APR(port) (BASE_IO_ADDR + 0x0154)
+#define MPR(port) (BASE_IO_ADDR + 0x0158)
+#define TPAUSER(port) (BASE_IO_ADDR + 0x0164)
+#define MAHR(port) (BASE_IO_ADDR + 0x01c0)
+#define MALR(port) (BASE_IO_ADDR + 0x01c8)
#endif
/*
@@ -183,7 +209,7 @@ enum DMAC_M_BIT {
EDMR_SRST = 0x03,
EMDR_DESC_R = 0x30, /* Descriptor reserve size */
EDMR_EL = 0x40, /* Litte endian */
-#elif defined CONFIG_CPU_SH7757
+#elif defined (CONFIG_CPU_SH7757) || defined (CONFIG_CPU_SH7724)
EDMR_SRST = 0x01,
EMDR_DESC_R = 0x30, /* Descriptor reserve size */
EDMR_EL = 0x40, /* Litte endian */
@@ -325,7 +351,8 @@ enum FCFTR_BIT {
/* Transfer descriptor bit */
enum TD_STS_BIT {
-#if defined(CONFIG_CPU_SH7763) || defined(CONFIG_CPU_SH7757)
+#if defined(CONFIG_CPU_SH7763) || defined(CONFIG_CPU_SH7757) \
+ || defined(CONFIG_CPU_SH7724)
TD_TACT = 0x80000000,
#else
TD_TACT = 0x7fffffff,
@@ -350,6 +377,10 @@ enum FELIC_MODE_BIT {
ECMR_PMDE = 0x00000200, ECMR_RE = 0x00000040, ECMR_TE = 0x00000020,
ECMR_ILB = 0x00000008, ECMR_ELB = 0x00000004, ECMR_DM = 0x00000002,
ECMR_PRM = 0x00000001,
+#ifdef CONFIG_CPU_SH7724
+ ECMR_RTM = 0x00000010,
+#endif
+
};
#ifdef CONFIG_CPU_SH7763
@@ -357,6 +388,8 @@ enum FELIC_MODE_BIT {
ECMR_TXF | ECMR_MCT)
#elif CONFIG_CPU_SH7757
#define ECMR_CHG_DM (ECMR_ZPF)
+#elif CONFIG_CPU_SH7724
+#define ECMR_CHG_DM (ECMR_ZPF | ECMR_PFR | ECMR_RXF | ECMR_TXF)
#else
#define ECMR_CHG_DM (ECMR_ZPF | ECMR_PFR | ECMR_RXF | ECMR_TXF | ECMR_MCT)
#endif
--
1.7.7
More information about the U-Boot
mailing list