[U-Boot] [PATCH] tegra2: Change CONFIG_SYS_TEXT_BASE to 0x00108000.

[Simon Glass]

Hi Thierry.

On Mon, Nov 14, 2011 at 11:19 PM, Thierry Reding
<thierry.reding at avionic-design.de> wrote:
> NVIDIA's flashing tools assume that the bootloader is loaded at address
> 0x00108000. Instead of requiring non-standard builds of those tools
> which allow a load address of 0x00E08000, this commit just switches all
> Tegra2 boards to use the standard load address.
>
> Note that to successfully boot a standalone U-Boot with this load
> address, U-Boot needs to be built with USE_PRIVATE_LIBGCC=yes.

Would you please remove this comment? As mentioned by others on this
thread it isn't affected by your change. Anyway:

Tested-by: Simon Glass <sjg at chromium.org>

>
> Signed-off-by: Thierry Reding <thierry.reding at avionic-design.de>
> ---
>  include/configs/tegra2-common.h |    2 +-
>  1 files changed, 1 insertions(+), 1 deletions(-)
>
> diff --git a/include/configs/tegra2-common.h b/include/configs/tegra2-common.h
> index 9c3b9fa..bcdfe61 100644
> --- a/include/configs/tegra2-common.h
> +++ b/include/configs/tegra2-common.h
> @@ -153,7 +153,7 @@
>  #define PHYS_SDRAM_1           TEGRA2_SDRC_CS0
>  #define PHYS_SDRAM_1_SIZE      0x20000000      /* 512M */
>
> -#define CONFIG_SYS_TEXT_BASE   0x00E08000
> +#define CONFIG_SYS_TEXT_BASE   0x00108000
>  #define CONFIG_SYS_SDRAM_BASE  PHYS_SDRAM_1
>
>  #define CONFIG_SYS_INIT_RAM_ADDR       CONFIG_STACKBASE
> --
> 1.7.7.3
>
>