[U-Boot] [PATCH 6/6] i.mx: i.mx6q: Add the initial support for i.mx6q ARM2 board

Jason Hui jason.hui at linaro.org
Wed Nov 16 13:15:34 CET 2011


On Wed, Nov 16, 2011 at 7:34 PM, Dirk Behme <dirk.behme at de.bosch.com> wrote:
> On 12.11.2011 11:36, Jason Liu wrote:
>>
>> Add the initial support for Freescale i.MX6Q Armadillo2 board
>> Support: MMC boot from slot 0/1, debug UART(UART4), usdhc.
>
> ...
>>
>> diff --git a/include/configs/mx6qarm2.h b/include/configs/mx6qarm2.h
>> new file mode 100644
>> index 0000000..a4c7b31
>> --- /dev/null
>> +++ b/include/configs/mx6qarm2.h
>
> ...
>>
>> +#define CONFIG_EXTRA_ENV_SETTINGS \
>> +       "script=boot.scr\0" \
>> +       "uimage=uImage\0" \
>> +       "mmcdev=0\0" \
>> +       "mmcpart=2\0" \
>> +       "mmcroot=/dev/mmcblk0p3 rw\0" \
>> +       "mmcrootfstype=ext3 rootwait\0" \
>> +       "mmcargs=setenv bootargs console=ttymxc0,${baudrate} " \
>> +               "root=${mmcroot} " \
>> +               "rootfstype=${mmcrootfstype}\0" \
>> +       "loadbootscript=" \
>> +               "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr}
>> ${script};\0" \
>> +       "bootscript=echo Running bootscript from mmc ...; " \
>> +               "source\0" \
>> +       "loaduimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr}
>> ${uimage}\0" \
>> +       "mmcboot=echo Booting from mmc ...; " \
>> +               "run mmcargs; " \
>> +               "bootm\0" \
>> +       "netargs=setenv bootargs console=ttymxc0,${baudrate} " \
>> +               "root=/dev/nfs " \
>> +               "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
>> +       "netboot=echo Booting from net ...; " \
>> +               "run netargs; " \
>> +               "dhcp ${uimage}; bootm\0" \
>> +
>> +#define CONFIG_BOOTCOMMAND \
>> +       "if mmc rescan ${mmcdev}; then " \
>> +               "if run loadbootscript; then " \
>> +                       "run bootscript; " \
>> +               "else " \
>> +                       "if run loaduimage; then " \
>> +                               "run mmcboot; " \
>> +                       "else run netboot; " \
>> +                       "fi; " \
>> +               "fi; " \
>> +       "else run netboot; fi"
>
> Testing this with the latest mainline kernel and a Linaro developer rootfs
> I'd like to propose the following changes to these settings [1]:
>
> * Introduce a ${console} variable to centralize the console configuration
> * The recent mainline kernel uses ttymxc3 instead of ttymxc0 for the
> console. I.e. switch from ttymxc0 to ttymxc3
> * Add a 'mmc dev ${mmcdev}' command to be able to switch between the SD
> slots
> * Use the SD card slot at the CPU board by default. Instead the one on the
> expansion base board. I.e. switch from mmcdev=0 to mmcdev=1
> * The Linaro rootfs uses EXT4. For this, remove the hard coded
> rootfstype=ext3 and let the kernel auto detect the rootfs type.
>
> Best regards
>
> Dirk
>
> [1]
>
> ---
>  include/configs/mx6qarm2.h |   14 +++++++-------
>  1 file changed, 7 insertions(+), 7 deletions(-)
>
> Index: a/include/configs/mx6qarm2.h
> ===================================================================
> --- a/include/configs/mx6qarm2.h
> +++ b/include/configs/mx6qarm2.h
> @@ -78,13 +78,12 @@
>  #define CONFIG_EXTRA_ENV_SETTINGS \
>        "script=boot.scr\0" \
>        "uimage=uImage\0" \
> -       "mmcdev=0\0" \
> +       "mmcdev=1\0" \
> +       "console=ttymxc3\0" \
>        "mmcpart=2\0" \
> -       "mmcroot=/dev/mmcblk0p3 rw\0" \
> -       "mmcrootfstype=ext3 rootwait\0" \
> -       "mmcargs=setenv bootargs console=ttymxc0,${baudrate} " \
> -               "root=${mmcroot} " \
> -               "rootfstype=${mmcrootfstype}\0" \
> +       "mmcroot=/dev/mmcblk0p3 rootwait rw\0" \
> +       "mmcargs=setenv bootargs console=${console},${baudrate} " \
> +               "root=${mmcroot}\0" \
>        "loadbootscript=" \
>                "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
>        "bootscript=echo Running bootscript from mmc ...; " \
> @@ -93,7 +92,7 @@
>        "mmcboot=echo Booting from mmc ...; " \
>                "run mmcargs; " \
>                "bootm\0" \
> -       "netargs=setenv bootargs console=ttymxc0,${baudrate} " \
> +       "netargs=setenv bootargs console=${console},${baudrate} " \
>                "root=/dev/nfs " \
>                "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
>        "netboot=echo Booting from net ...; " \
> @@ -101,6 +100,7 @@
>                "dhcp ${uimage}; bootm\0" \
>
>  #define CONFIG_BOOTCOMMAND \
> +       "mmc dev ${mmcdev};" \
>        "if mmc rescan ${mmcdev}; then " \
>                "if run loadbootscript; then " \
>                        "run bootscript; " \
>

Thanks for the testing and the suggestion for config file change. I
will pull it in the
v2 version and put a test-by you into the commit log.

Jason Liu


More information about the U-Boot mailing list