[U-Boot] [PATCH v3] arm:exynos4:samsung:nuri Support for NURI target.
Chander Kashyap
chander.kashyap at linaro.org
Thu Nov 17 13:15:33 CET 2011
On 17 November 2011 16:41, Lukasz Majewski <l.majewski at samsung.com> wrote:
> This patch adds support for Samsung's Exynos4 Nuri reference
> board.
>
> New exynos4_nuri board has been added to boards.cfg
>
> Signed-off-by: Lukasz Majewski <l.majewski at samsung.com>
> Signed-off-by: Kyungmin Park <kyungmin.park at samsung.com>
> Cc: Minkyu Kang <mk7.kang at samsung.com>
> ---
> Changes for v2:
> - MAINTAINERS file updated
> - CONFIG_MACH_TYPE added
> - hw_revision routine
> Changes for v3:
> - Entry to MAINTAINERS file added to preserve an alphabetical order
> - Redefinition of MACH_TYPE removed from exynos4_nuri.h
> - Code cleanup (dead spaces removed)
>
> ./tools/checkpatch.pl -
> total: 0 errors, 0 warnings, 867 lines checked
>
> NOTE: Ignored message types: COMPLEX_MACRO CONSIDER_KSTRTO MINMAX
> MULTISTATEMENT_MACRO_USE_DO_WHILE
> ---
> MAINTAINERS | 4 +
> board/samsung/nuri/Makefile | 45 ++++
> board/samsung/nuri/lowlevel_init.S | 395
> ++++++++++++++++++++++++++++++++++++
> board/samsung/nuri/nuri.c | 201 ++++++++++++++++++
> boards.cfg | 1 +
> include/configs/exynos4_nuri.h | 209 +++++++++++++++++++
> 6 files changed, 855 insertions(+), 0 deletions(-)
> create mode 100644 board/samsung/nuri/Makefile
> create mode 100644 board/samsung/nuri/lowlevel_init.S
> create mode 100644 board/samsung/nuri/nuri.c
> create mode 100644 include/configs/exynos4_nuri.h
>
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 576fea8..aa1fc15 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -724,6 +724,10 @@ Valentin Longchamp <valentin.longchamp at keymile.com>
> km_kirkwood ARM926EJS (Kirkwood SoC)
> portl2 ARM926EJS (Kirkwood SoC)
>
> +Łukasz Majewski <l.majewski at samsung.com>
> +
> + exynos4_nuri ARM ARMV7 (S5PC210 SoC)
> +
> Nishanth Menon <nm at ti.com>
>
> omap3_sdp3430 ARM ARMV7 (OMAP3xx SoC)
> diff --git a/board/samsung/nuri/Makefile b/board/samsung/nuri/Makefile
> new file mode 100644
> index 0000000..27566de
> --- /dev/null
> +++ b/board/samsung/nuri/Makefile
> @@ -0,0 +1,45 @@
> +#
> +# Copyright (C) 2010 Samsung Electronics
> +# Minkyu Kang <mk7.kang at samsung.com>
> +#
> +# See file CREDITS for list of people who contributed to this
> +# project.
> +#
> +# This program is free software; you can redistribute it and/or
> +# modify it under the terms of the GNU General Public License as
> +# published by the Free Software Foundation; either version 2 of
> +# the License, or (at your option) any later version.
> +#
> +# This program is distributed in the hope that it will be useful,
> +# but WITHOUT ANY WARRANTY; without even the implied warranty of
> +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> +# GNU General Public License for more details.
> +#
> +# You should have received a copy of the GNU General Public License
> +# along with this program; if not, write to the Free Software
> +# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
> +# MA 02111-1307 USA
> +#
> +
> +include $(TOPDIR)/config.mk
> +
> +LIB = $(obj)lib$(BOARD).o
> +
> +COBJS-y := nuri.o
> +SOBJS := lowlevel_init.o
> +
> +SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c)
> +OBJS := $(addprefix $(obj),$(COBJS-y))
> +SOBJS := $(addprefix $(obj),$(SOBJS))
> +
> +$(LIB): $(obj).depend $(SOBJS) $(OBJS)
> + $(call cmd_link_o_target, $(SOBJS) $(OBJS))
> +
> +#########################################################################
> +
> +# defines $(obj).depend target
> +include $(SRCTREE)/rules.mk
> +
> +sinclude $(obj).depend
> +
> +#########################################################################
> diff --git a/board/samsung/nuri/lowlevel_init.S
> b/board/samsung/nuri/lowlevel_init.S
> new file mode 100644
> index 0000000..67635bb
> --- /dev/null
> +++ b/board/samsung/nuri/lowlevel_init.S
> @@ -0,0 +1,395 @@
> +/*
> + * Lowlevel setup for universal board based on S5PC210
> + *
> + * Copyright (C) 2010 Samsung Electronics
> + * Kyungmin Park <kyungmin.park at samsung.com>
> + *
> + * See file CREDITS for list of people who contributed to this
> + * project.
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of
> + * the License, or (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
> + * MA 02111-1307 USA
> + */
> +
> +#include <config.h>
> +#include <version.h>
> +#include <asm/arch/cpu.h>
> +#include <asm/arch/clock.h>
> +
> +/*
> + * Register usages:
> + *
> + * r5 has zero always
> + * r7 has GPIO part1 base 0x11400000
> + * r6 has GPIO part2 base 0x11000000
> + */
> +
> + .globl lowlevel_init
> +lowlevel_init:
> + mov r11, lr
> +
> + /* r5 has always zero */
> + mov r5, #0
> +
> + ldr r7, =S5PC210_GPIO_PART1_BASE
> + ldr r6, =S5PC210_GPIO_PART2_BASE
> +
> + /* System Timer */
> + ldr r0, =S5PC210_SYSTIMER_BASE
> + ldr r1, =0x5000
> + str r1, [r0, #0x0]
> + ldr r1, =0xffffffff
> + str r1, [r0, #0x8]
> + ldr r1, =0x49
> + str r1, [r0, #0x4]
> +
> + /* PMIC manual reset */
> + /* nPOWER: XEINT_23: GPX2[7] */
> + add r0, r6, #0xC40 @ S5PC210_GPIO_X2_OFFSET
> + ldr r1, [r0, #0x0]
> + bic r1, r1, #(0xf << 28) @ 28 = 7 * 4-bit
> + orr r1, r1, #(0x1 << 28) @ Output
> + str r1, [r0, #0x0]
> +
> + ldr r1, [r0, #0x4]
> + orr r1, r1, #(1 << 7) @ 7 = 7 * 1-bit
> + str r1, [r0, #0x4]
> +
> + /* init system clock */
> + bl system_clock_init
> +
> + /* Disable Watchdog */
> + ldr r0, =S5PC210_WATCHDOG_BASE @0x10060000
> + str r5, [r0]
> +
> + /* UART */
> + bl uart_asm_init
> +
> + /* PMU init */
> + bl system_power_init
> +
> + bl tzpc_init
> +
> + mov lr, r11
> + mov pc, lr
> + nop
> + nop
> + nop
> +
> +/*
> + * uart_asm_init: Initialize UART's pins
> + */
> +uart_asm_init:
> + /*
> + * setup UART0-UART4 GPIOs (part1)
> + * GPA1CON[3] = I2C_3_SCL (3)
> + * GPA1CON[2] = I2C_3_SDA (3)
> + */
> + mov r0, r7
> + ldr r1, =0x22222222
> + str r1, [r0, #0x00] @ S5PC210_GPIO_A0_OFFSET
> + ldr r1, =0x00223322
> + str r1, [r0, #0x20] @ S5PC210_GPIO_A1_OFFSET
> +
> + /* UART_SEL GPY4[7] (part2) at S5PC210 */
> + add r0, r6, #0x1A0 @ S5PC210_GPIO_Y4_OFFSET
> + ldr r1, [r0, #0x0]
> + bic r1, r1, #(0xf << 28) @ 28 = 7 * 4-bit
> + orr r1, r1, #(0x1 << 28)
> + str r1, [r0, #0x0]
> +
> + ldr r1, [r0, #0x8]
> + bic r1, r1, #(0x3 << 14) @ 14 = 7 * 2-bit
> + orr r1, r1, #(0x3 << 14) @ Pull-up enabled
> + str r1, [r0, #0x8]
> +
> + ldr r1, [r0, #0x4]
> + orr r1, r1, #(1 << 7) @ 7 = 7 * 1-bit
> + str r1, [r0, #0x4]
> +
> + mov pc, lr
> + nop
> + nop
> + nop
> +
> +system_clock_init:
> + ldr r0, =S5PC210_CLOCK_BASE
> +
> + /* APLL(1), MPLL(1), CORE(0), HPM(0) */
> + ldr r1, =0x0101
> + ldr r2, =0x14200 @ CLK_SRC_CPU
> + str r1, [r0, r2]
> +
> + /* wait ?us */
> + mov r1, #0x10000
> +1: subs r1, r1, #1
> + bne 1b
> +
> + /*
> + * CLK_SRC_TOP0
> + * MUX_ONENAND_SEL[28] 0: DOUT133, 1: DOUT166
> + * MUX_VPLL_SEL[8] 0: FINPLL, 1: FOUTVPLL
> + * MUX_EPLL_SEL[4] 0: FINPLL, 1: FOUTEPLL
> + */
> + ldr r1, =0x10000110
> + ldr r2, =0x0C210 @ CLK_SRC_TOP
> + str r1, [r0, r2]
> +
> + /* SATA: SCLKMPLL(0), MMC[0:4]: SCLKMPLL(6) */
> + ldr r1, =0x0066666
> + ldr r2, =0x0C240 @ CLK_SRC_FSYS
> + str r1, [r0, r2]
> + /* UART[0:5], PWM: SCLKMPLL(6) */
> + ldr r1, =0x6666666
> + ldr r2, =0x0C250 @ CLK_SRC_PERIL0_OFFSET
> + str r1, [r0, r2]
> +
> + /* CPU0: CORE, COREM0, COREM1, PERI, ATB, PCLK_DBG, APLL */
> + ldr r1, =0x0133730
> + ldr r2, =0x14500 @ CLK_DIV_CPU0
> + str r1, [r0, r2]
> + /* CPU1: COPY, HPM */
> + ldr r1, =0x03
> + ldr r2, =0x14504 @ CLK_DIV_CPU1
> + str r1, [r0, r2]
> + /* DMC0: ACP, ACP_PCLK, DPHY, DMC, DMCD, DMCP, COPY2 CORE_TIMER */
> + ldr r1, =0x13111113
> + ldr r2, =0x10500 @ CLK_DIV_DMC0
> + str r1, [r0, r2]
> + /* DMC1: PWI, DVSEM, DPM */
> + ldr r1, =0x01010100
> + ldr r2, =0x10504 @ CLK_DIV_DMC1
> + str r1, [r0, r2]
> + /* LEFTBUS: GDL, GPL */
> + ldr r1, =0x13
> + ldr r2, =0x04500 @ CLK_DIV_LEFTBUS
> + str r1, [r0, r2]
> + /* RIGHHTBUS: GDR, GPR */
> + ldr r1, =0x13
> + ldr r2, =0x08500 @ CLK_DIV_RIGHTBUS
> + str r1, [r0, r2]
> + /*
> + * CLK_DIV_TOP
> + * ONENAND_RATIOD[18:16]: 0 SCLK_ONENAND = MOUTONENAND / (n + 1)
> + * ACLK_200, ACLK_100, ACLK_160, ACLK_133,
> + */
> + ldr r1, =0x00005473
> + ldr r2, =0x0C510 @ CLK_DIV_TOP
> + str r1, [r0, r2]
> + /* MMC[0:1] */
> + ldr r1, =0x000f000f /* 800(MPLL) / (15 + 1) */
> + ldr r2, =0x0C544 @ CLK_DIV_FSYS1
> + str r1, [r0, r2]
> + /* MMC[2:3] */
> + ldr r1, =0x000f000f /* 800(MPLL) / (15 + 1) */
> + ldr r2, =0x0C548 @ CLK_DIV_FSYS2
> + str r1, [r0, r2]
> + /* MMC4 */
> + ldr r1, =0x000f /* 800(MPLL) / (15 + 1) */
> + ldr r2, =0x0C54C @ CLK_DIV_FSYS3
> + str r1, [r0, r2]
> + /* UART[0:5] */
> + ldr r1, =0x774777
> + ldr r2, =0x0C550 @ CLK_DIV_PERIL0
> + str r1, [r0, r2]
> + /* SLIMBUS: ???, PWM */
> + ldr r1, =0x8
> + ldr r2, =0x0C55C @ CLK_DIV_PERIL3
> + str r1, [r0, r2]
> +
> + /* PLL Setting */
> + ldr r1, =0x1C20
> + ldr r2, =0x14000 @ APLL_LOCK
> + str r1, [r0, r2]
> + ldr r2, =0x14008 @ MPLL_LOCK
> + str r1, [r0, r2]
> + ldr r2, =0x0C010 @ EPLL_LOCK
> + str r1, [r0, r2]
> + ldr r2, =0x0C020 @ VPLL_LOCK
> + str r1, [r0, r2]
> +
> + /* APLL */
> + ldr r1, =0x8000001c
> + ldr r2, =0x14104 @ APLL_CON1
> + str r1, [r0, r2]
> + ldr r1, =0x80c80601 @ 800MHz
> + ldr r2, =0x14100 @ APLL_CON0
> + str r1, [r0, r2]
> + /* MPLL */
> + ldr r1, =0x8000001C
> + ldr r2, =0x1410C @ MPLL_CON1
> + str r1, [r0, r2]
> + ldr r1, =0x80c80601 @ 800MHz
> + ldr r2, =0x14108 @ MPLL_CON0
> + str r1, [r0, r2]
> + /* EPLL */
> + ldr r1, =0x0
> + ldr r2, =0x0C114 @ EPLL_CON1
> + str r1, [r0, r2]
> + ldr r1, =0x80300302 @ 96MHz
> + ldr r2, =0x0C110 @ EPLL_CON0
> + str r1, [r0, r2]
> + /* VPLL */
> + ldr r1, =0x11000400
> + ldr r2, =0x0C124 @ VPLL_CON1
> + str r1, [r0, r2]
> + ldr r1, =0x80350302 @ 108MHz
> + ldr r2, =0x0C120 @ VPLL_CON0
> + str r1, [r0, r2]
> +
> + /*
> + * SMMUJPEG[11], JPEG[6], CSIS1[5] : 0111 1001
> + * Turn off all
> + */
> + ldr r1, =0xFFF80000
> + ldr r2, =0x0C920 @ CLK_GATE_IP_CAM
> + str r1, [r0, r2]
> +
> + /* Turn off all */
> + ldr r1, =0xFFFFFFC0
> + ldr r2, =0x0C924 @ CLK_GATE_IP_VP
> + str r1, [r0, r2]
> +
> + /* Turn off all */
> + ldr r1, =0xFFFFFFE0
> + ldr r2, =0x0C928 @ CLK_GATE_IP_MFC
> + str r1, [r0, r2]
> +
> + /* Turn off all */
> + ldr r1, =0xFFFFFFFC
> + ldr r2, =0x0C92C @ CLK_GATE_IP_G3D
> + str r1, [r0, r2]
> +
> + /* Turn off all */
> + ldr r1, =0xFFFFFC00
> + ldr r2, =0x0C930 @ CLK_GATE_IP_IMAGE
> + str r1, [r0, r2]
> +
> + /* DSIM0[3], MDNIE0[2], MIE0[1] : 0001 */
> + ldr r1, =0xFFFFFFF1
> + ldr r2, =0x0C934 @ CLK_GATE_IP_LCD0
> + str r1, [r0, r2]
> +
> + /* Turn off all */
> + ldr r1, =0xFFFFFFC0
> + ldr r2, =0x0C938 @ CLK_GATE_IP_LCD1
> + str r1, [r0, r2]
> +
> + /*
> + * SMMUPCIE[18], NFCON[16] : 1111 1010
> + * PCIE[14], SATA[10], SDMMC43[9:8] : 1011 1000
> + * SDMMC1[6], TSI[4], SATAPHY[3], PCIEPHY[2] : 1010 0011
> + */
> + ldr r1, =0xFFFAB8A3
> + ldr r2, =0x0C940 @ CLK_GATE_IP_FSYS
> + str r1, [r0, r2]
> +
> + /* Turn off all */
> + ldr r1, =0xFFFFFFFC
> + ldr r2, =0x0C94C @ CLK_GATE_IP_GPS
> + str r1, [r0, r2]
> +
> + /*
> + * AC97[27], SPDIF[26], SLIMBUS[25] : 1111 0001
> + * I2C2[8] : 1111 1110
> + */
> + ldr r1, =0xF1FFFEFF
> + ldr r2, =0x0C950 @ CLK_GATE_IP_PERIL
> + str r1, [r0, r2]
> +
> + /*
> + * KEYIF[16] : 1111 1110
> + */
> + ldr r1, =0xFFFEFFFF
> + ldr r2, =0x0C960 @ CLK_GATE_IP_PERIR
> + str r1, [r0, r2]
> +
> + /* LCD1[5], G3D[3], MFC[2], TV[1] : 1101 0001 */
> + ldr r1, =0xFFFFFFD1
> + ldr r2, =0x0C970 @ CLK_GATE_BLOCK
> + str r1, [r0, r2]
> + mov pc, lr
> + nop
> + nop
> + nop
> +
> +system_power_init:
> + ldr r0, =S5PC210_POWER_BASE @ 0x10020000
> +
> + ldr r2, =0x330C @ PS_HOLD_CONTROL
> + ldr r1, [r0, r2]
> + orr r1, r1, #(0x3 << 8) @ Data High, Output En
> + str r1, [r0, r2]
> +
> + /* Power Down */
> + add r2, r0, #0x3000
> + str r5, [r2, #0xC20] @ TV_CONFIGURATION
> + str r5, [r2, #0xC40] @ MFC_CONFIGURATION
> + str r5, [r2, #0xC60] @ G3D_CONFIGURATION
> + str r5, [r2, #0xCA0] @ LCD1_CONFIGURATION
> + str r5, [r2, #0xCE0] @ GPS_CONFIGURATION
> +
> + mov pc, lr
> + nop
> + nop
> + nop
> +
> +tzpc_init:
> + ldr r0, =0x10110000
> + mov r1, #0x0
> + str r1, [r0]
> + mov r1, #0xff
> + str r1, [r0, #0x0804]
> + str r1, [r0, #0x0810]
> + str r1, [r0, #0x081C]
> + str r1, [r0, #0x0828]
> +
> + ldr r0, =0x10120000
> + mov r1, #0x0
> + str r1, [r0]
> + mov r1, #0xff
> + str r1, [r0, #0x0804]
> + str r1, [r0, #0x0810]
> + str r1, [r0, #0x081C]
> + str r1, [r0, #0x0828]
> +
> + ldr r0, =0x10130000
> + mov r1, #0x0
> + str r1, [r0]
> + mov r1, #0xff
> + str r1, [r0, #0x0804]
> + str r1, [r0, #0x0810]
> + str r1, [r0, #0x081C]
> + str r1, [r0, #0x0828]
> +
> + ldr r0, =0x10140000
> + mov r1, #0x0
> + str r1, [r0]
> + mov r1, #0xff
> + str r1, [r0, #0x0804]
> + str r1, [r0, #0x0810]
> + str r1, [r0, #0x081C]
> + str r1, [r0, #0x0828]
> +
> + ldr r0, =0x10150000
> + mov r1, #0x0
> + str r1, [r0]
> + mov r1, #0xff
> + str r1, [r0, #0x0804]
> + str r1, [r0, #0x0810]
> + str r1, [r0, #0x081C]
> + str r1, [r0, #0x0828]
> +
> + mov pc, lr
> diff --git a/board/samsung/nuri/nuri.c b/board/samsung/nuri/nuri.c
> new file mode 100644
> index 0000000..4a48526
> --- /dev/null
> +++ b/board/samsung/nuri/nuri.c
> @@ -0,0 +1,201 @@
> +/*
> + * Copyright (C) 2011 Samsung Electronics
> + * Minkyu Kang <mk7.kang at samsung.com>
> + * Kyungmin Park <kyungmin.park at samsung.com>
> + * Łukasz Majewski <l.majewski at samsung.com>
> + *
> + * See file CREDITS for list of people who contributed to this
> + * project.
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of
> + * the License, or (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
> + * MA 02111-1307 USA
> + */
> +
> +#include <common.h>
> +#include <asm/io.h>
> +#include <asm/arch/adc.h>
> +#include <asm/arch/gpio.h>
> +#include <asm/arch/mmc.h>
> +
> +DECLARE_GLOBAL_DATA_PTR;
> +
> +struct s5pc210_gpio_part1 *gpio1;
> +struct s5pc210_gpio_part2 *gpio2;
> +static unsigned int board_rev;
> +
> +u32 get_board_rev(void)
> +{
> + return board_rev;
> +}
> +
> +static void check_hw_revision(void);
> +
> +int board_init(void)
> +{
> + gpio1 = (struct s5pc210_gpio_part1 *) S5PC210_GPIO_PART1_BASE;
> + gpio2 = (struct s5pc210_gpio_part2 *) S5PC210_GPIO_PART2_BASE;
> +
> + gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
> +
> + check_hw_revision();
> + printf("HW Revision:\t0x%x\n", board_rev);
> +
> + return 0;
> +}
> +
> +int dram_init(void)
> +{
> + gd->ram_size = \
> + get_ram_size((long *)PHYS_SDRAM_1, PHYS_SDRAM_1_SIZE) +
> + get_ram_size((long *)PHYS_SDRAM_2, PHYS_SDRAM_2_SIZE) +
> + get_ram_size((long *)PHYS_SDRAM_3, PHYS_SDRAM_3_SIZE) +
> + get_ram_size((long *)PHYS_SDRAM_4, PHYS_SDRAM_4_SIZE);
> +
> + return 0;
> +}
> +
> +void dram_init_banksize(void)
> +{
> + gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
> + gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
>
please put ram size validation.
> + gd->bd->bi_dram[1].start = PHYS_SDRAM_2;
> + gd->bd->bi_dram[1].size = PHYS_SDRAM_2_SIZE;
> + gd->bd->bi_dram[2].start = PHYS_SDRAM_3;
> + gd->bd->bi_dram[2].size = PHYS_SDRAM_3_SIZE;
> + gd->bd->bi_dram[3].start = PHYS_SDRAM_4;
> + gd->bd->bi_dram[3].size = PHYS_SDRAM_4_SIZE;
> +}
>
+
> +static unsigned int get_hw_revision(void)
> +{
> + int hwrev = 0;
> + int i;
> +
> + /* NFC_EN: GPL2[6]: output high - early enable for board type
> chcking */
> + s5p_gpio_direction_output(&gpio2->l2, 6, 1);
> +
> + /* HW_REV[0:3]: GPE1[0:3] */
> + for (i = 0; i < 4; i++) {
> + s5p_gpio_direction_input(&gpio1->e1, i);
> + s5p_gpio_set_pull(&gpio1->e1, i, GPIO_PULL_NONE);
> + }
> +
> + udelay(10);
> +
> + for (i = 0; i < 4; i++)
> + hwrev |= (s5p_gpio_get_value(&gpio1->e1, i) << i);
> +
> + debug("hwrev 0x%x\n", hwrev);
> +
> + return hwrev;
> +}
> +
> +static void check_hw_revision(void)
> +{
> + board_rev = get_hw_revision();
> +}
> +
> +#ifdef CONFIG_DISPLAY_BOARDINFO
> +int checkboard(void)
> +{
> + puts("Board:\tExynos4 Nuri\n");
> + return 0;
> +}
> +#endif
> +
> +#ifdef CONFIG_GENERIC_MMC
> +int board_mmc_init(bd_t *bis)
> +{
> + int i, err;
> +
> + /* MASSMEMORY_EN: GPL[1] -> output LOW */
> + s5p_gpio_direction_output(&gpio2->l1, 1, 0);
> + s5p_gpio_set_pull(&gpio2->l1, 1, GPIO_PULL_NONE);
> +
> + /*
> + * eMMC GPIO:
> + * SDR 8-bit at 48MHz at MMC0
> + * GPK0[0] SD_0_CLK(2)
> + * GPK0[1] SD_0_CMD(2)
> + * GPK0[2] SD_0_CDn -> Not used
> + * GPK0[3:6] SD_0_DATA[0:3](2)
> + * GPK1[3:6] SD_0_DATA[0:3](3)
> + *
> + * DDR 4-bit at 26MHz at MMC4
> + * GPK0[0] SD_4_CLK(3)
> + * GPK0[1] SD_4_CMD(3)
> + * GPK0[2] SD_4_CDn -> Not used
> + * GPK0[3:6] SD_4_DATA[0:3](3)
> + * GPK1[3:6] SD_4_DATA[4:7](4)
> + */
> + for (i = 0; i < 7; i++) {
> + if (i == 2)
> + continue;
> + /* GPK0[0:6] special function 2 */
> + s5p_gpio_cfg_pin(&gpio2->k0, i, GPIO_FUNC(0x2));
> + /* GPK0[0:6] pull disable */
> + s5p_gpio_set_pull(&gpio2->k0, i, GPIO_PULL_NONE);
> + /* GPK0[0:6] drv 4x */
> + s5p_gpio_set_drv(&gpio2->k0, i, GPIO_DRV_4X);
> + }
> +
> + for (i = 3; i < 7; i++) {
> + /* GPK1[3:6] special function 3 */
> + s5p_gpio_cfg_pin(&gpio2->k1, i, GPIO_FUNC(0x3));
> + /* GPK1[3:6] pull disable */
> + s5p_gpio_set_pull(&gpio2->k1, i, GPIO_PULL_NONE);
> + /* GPK1[3:6] drv 4x */
> + s5p_gpio_set_drv(&gpio2->k1, i, GPIO_DRV_4X);
> + }
> +
> + /*
> + * MMC device init
> + * mmc0 : eMMC (8-bit buswidth)
> + * mmc2 : SD card (4-bit buswidth)
> + */
> + err = s5p_mmc_init(0, 8);
> +
> + /* T-flash detect */
> + s5p_gpio_cfg_pin(&gpio2->x3, 3, GPIO_IRQ);
> + s5p_gpio_set_pull(&gpio2->x3, 3, GPIO_PULL_UP);
> +
> + /*
> + * Check the T-flash detect pin
> + * GPX3[3] T-flash detect pin
> + */
> + if (!s5p_gpio_get_value(&gpio2->x3, 3)) {
> + /*
> + * SD card GPIO:
> + * GPK2[0] SD_2_CLK(2)
> + * GPK2[1] SD_2_CMD(2)
> + * GPK2[2] SD_2_CDn -> Not used
> + * GPK2[3:6] SD_2_DATA[0:3](2)
> + */
> + for (i = 0; i < 7; i++) {
> + if (i == 2)
> + continue;
> + /* GPK2[0:6] special function 2 */
> + s5p_gpio_cfg_pin(&gpio2->k2, i, GPIO_FUNC(0x2));
> + /* GPK2[0:6] pull disable */
> + s5p_gpio_set_pull(&gpio2->k2, i, GPIO_PULL_NONE);
> + /* GPK2[0:6] drv 4x */
> + s5p_gpio_set_drv(&gpio2->k2, i, GPIO_DRV_4X);
> + }
> + err = s5p_mmc_init(2, 4);
> + }
> +
> + return err;
> +}
> +#endif
> diff --git a/boards.cfg b/boards.cfg
> index 604becf..6ae4f3d 100644
> --- a/boards.cfg
> +++ b/boards.cfg
> @@ -189,6 +189,7 @@ omap4_panda arm armv7
> panda ti
> omap4_sdp4430 arm armv7 sdp4430
> ti omap4
> s5p_goni arm armv7 goni
> samsung s5pc1xx
> smdkc100 arm armv7 smdkc100
> samsung s5pc1xx
> +exynos4_nuri arm armv7 nuri
> samsung s5pc2xx
> origen arm armv7 origen
> samsung s5pc2xx
> s5pc210_universal arm armv7 universal_c210
> samsung s5pc2xx
> smdkv310 arm armv7 smdkv310
> samsung s5pc2xx
> diff --git a/include/configs/exynos4_nuri.h
> b/include/configs/exynos4_nuri.h
> new file mode 100644
> index 0000000..813b301
> --- /dev/null
> +++ b/include/configs/exynos4_nuri.h
> @@ -0,0 +1,209 @@
> +/*
> + * Copyright (C) 2011 Samsung Electronics
> + * Łukasz Majewski <l.majewski at samsung.com>
> + *
> + * Configuation settings for the SAMSUNG Universal (s5pc100) board.
> + *
> + * See file CREDITS for list of people who contributed to this
> + * project.
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of
> + * the License, or (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
> + * MA 02111-1307 USA
> + */
> +
> +#ifndef __CONFIG_H
> +#define __CONFIG_H
> +
> +/*
> + * High Level Configuration Options
> + *
> + */
> +#define CONFIG_SAMSUNG /* in a SAMSUNG core */
> +#define CONFIG_S5P /* which is in a S5P Family */
> +#define CONFIG_S5PC210 /* which is in a S5PC210 */
> +#define CONFIG_NURI /* working with NURI */
> +
> +#define CONFIG_MACH_TYPE 3379 /* NURI mach type */
>
Please use CONFIG_MACH_NURI instead of hard coding it. It is defined in
./arch/arm/include/asm/mach-types.h
> +
> +#include <asm/arch/cpu.h> /* get chip and board defs */
> +
> +#define CONFIG_ARCH_CPU_INIT
> +#define CONFIG_DISPLAY_CPUINFO
> +#define CONFIG_DISPLAY_BOARDINFO
> +
> +/* Keep L2 Cache Disabled */
> +#define CONFIG_SYS_L2CACHE_OFF 1
> +
> +#define CONFIG_SYS_SDRAM_BASE 0x40000000
> +#define CONFIG_SYS_TEXT_BASE 0x44800000
> +
> +/* input clock of PLL: Universal has 24MHz input clock at S5PC210 */
> +#define CONFIG_SYS_CLK_FREQ_C210 24000000
> +
> +#define CONFIG_SETUP_MEMORY_TAGS
> +#define CONFIG_CMDLINE_TAG
> +#define CONFIG_INITRD_TAG
> +#define CONFIG_REVISION_TAG
> +#define CONFIG_CMDLINE_EDITING
> +
> +/* Size of malloc() pool */
> +#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (1 << 20))
> +
> +/* select serial console configuration */
> +#define CONFIG_SERIAL_MULTI
> +#define CONFIG_SERIAL2 /* use SERIAL 2 */
> +#define CONFIG_BAUDRATE 115200
> +
> +/* MMC */
> +#define CONFIG_GENERIC_MMC
> +#define CONFIG_MMC
> +#define CONFIG_S5P_MMC
> +
> +/* PWM */
> +#define CONFIG_PWM
> +
> +/* It should define before config_cmd_default.h */
> +#define CONFIG_SYS_NO_FLASH
> +
> +/* Command definition */
> +#include <config_cmd_default.h>
> +
> +#undef CONFIG_CMD_FPGA
> +#undef CONFIG_CMD_MISC
> +#undef CONFIG_CMD_NET
> +#undef CONFIG_CMD_NFS
> +#undef CONFIG_CMD_XIMG
> +#define CONFIG_CMD_CACHE
> +#define CONFIG_CMD_MMC
> +#define CONFIG_CMD_FAT
> +
> +#define CONFIG_BOOTDELAY 2
> +#define CONFIG_ZERO_BOOTDELAY_CHECK
> +
> +#define CONFIG_BOOTARGS "Please use defined boot"
> +#define CONFIG_BOOTCOMMAND "run mmcboot"
> +#define CONFIG_DEFAULT_CONSOLE "console=ttySAC2,115200n8\0"
> +
> +#define CONFIG_BOOTBLOCK "10"
> +#define CONFIG_UBIBLOCK "9"
> +
> +#define CONFIG_ENV_UBIFS_OPTION "
> rootflags=bulk_read,no_chk_data_crc "
> +
> +#define CONFIG_ENV_COMMON_BOOT "${console} ${meminfo}"
> +
> +#define CONFIG_ENV_OVERWRITE
> +#define CONFIG_SYS_CONSOLE_INFO_QUIET
> +#define CONFIG_SYS_CONSOLE_IS_IN_ENV
> +
> +#define MBRPARTS_DEFAULT "20M(permanent)"\
> + ",20M(boot)"\
> + ",1G(system)"\
> + ",100M(swap)"\
> + ",-(UMS)\0"
> +
> +#define CONFIG_EXTRA_ENV_SETTINGS \
> + "bootk=" \
> + "run loaduimage; bootm 0x40007FC0\0" \
> + "updatemmc=" \
> + "mmc boot 0 1 1 1; mmc write 0 0x42008000 0 0x200;" \
> + "mmc boot 0 1 1 0\0" \
> + "updatebackup=" \
> + "mmc boot 0 1 1 2; mmc write 0 0x42100000 0 0x200;" \
> + "mmc boot 0 1 1 0\0" \
> + "updatebootb=" \
> + "mmc read 0 0x42100000 0x80 0x200; run updatebackup\0" \
> + "lpj=lpj=3981312\0" \
> + "nfsboot=" \
> + "set bootargs root=/dev/nfs rw " \
> + "nfsroot=${nfsroot},nolock,tcp " \
> + "ip=${ipaddr}:${serverip}:${gatewayip}:" \
> + "${netmask}:generic:usb0:off " CONFIG_ENV_COMMON_BOOT \
> + "; run bootk\0" \
> + "ramfsboot=" \
> + "set bootargs root=/dev/ram0 rw rootfstype=ext2 " \
> + "${console} ${meminfo} " \
> + "initrd=0x43000000,8M ramdisk=8192\0" \
> + "mmcboot=" \
> + "set bootargs root=/dev/mmcblk${mmcdev}p${mmcrootpart} " \
> + "${lpj} rootwait ${console} ${meminfo} ${opts} ${lcdinfo};
> " \
> + "run loaduimage; bootm 0x40007FC0\0" \
> + "bootchart=set opts init=/sbin/bootchartd; run bootcmd\0" \
> + "boottrace=setenv opts initcall_debug; run bootcmd\0" \
> + "mmcoops=mmc read 0 0x40000000 0x40 8; md 0x40000000 0x400\0" \
> + "verify=n\0" \
> + "rootfstype=ext4\0" \
> + "console=" CONFIG_DEFAULT_CONSOLE \
> + "mbrparts=" MBRPARTS_DEFAULT \
> + "meminfo=crashkernel=32M at 0x50000000\0" \
> + "nfsroot=/nfsroot/arm\0" \
> + "bootblock=" CONFIG_BOOTBLOCK "\0" \
> + "ubiblock=" CONFIG_UBIBLOCK" \0" \
> + "loaduimage=fatload mmc ${mmcdev}:${mmcbootpart} 0x40007FC0
> uImage\0" \
> + "mmcdev=0\0" \
> + "mmcbootpart=2\0" \
> + "mmcrootpart=5\0" \
> + "opts=always_resume=1"
> +
> +/* Miscellaneous configurable options */
> +#define CONFIG_SYS_LONGHELP /* undef to save memory */
> +#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */
> +#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
> +#define CONFIG_SYS_PROMPT "Nuri # "
> +#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
> +#define CONFIG_SYS_PBSIZE 384 /* Print Buffer Size */
> +#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
> +/* Boot Argument Buffer Size */
> +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
> +/* memtest works on */
> +#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE
> +#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + 0x5000000)
> +#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x4800000)
> +
> +#define CONFIG_SYS_HZ 1000
> +
> +/* valid baudrates */
> +#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600,
> 115200 }
> +
> +/* Stack sizes */
> +#define CONFIG_STACKSIZE (256 << 10) /* regular stack 256KB */
> +
> +/* Nuri has 2 banks of DRAM -> support bank swapping */
> +#define CONFIG_NR_DRAM_BANKS 4
>
As per comment Nuri has 2 banks of DRAM, But configuration happens for 4
banks.
> +#define PHYS_SDRAM_1 CONFIG_SYS_SDRAM_BASE /* LDDDR2 DMC 0 */
> +#define PHYS_SDRAM_1_SIZE (256 << 20) /* 256 MB in CS 0
> */
> +#define PHYS_SDRAM_2 0x50000000 /* LPDDR2 DMC 1 */
> +#define PHYS_SDRAM_2_SIZE (256 << 20) /* 256 MB in CS 0
> */
> +#define PHYS_SDRAM_3 0x60000000
> +#define PHYS_SDRAM_3_SIZE (256 << 20)
> +#define PHYS_SDRAM_4 0x70000000
> +#define PHYS_SDRAM_4_SIZE (256 << 20)
> +
> +#define CONFIG_SYS_MEM_TOP_HIDE (1 << 20) /* ram
> console */
> +
> +#define CONFIG_SYS_MONITOR_BASE 0x00000000
> +#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 2
> sectors */
> +
> +#define CONFIG_ENV_IS_IN_MMC
> +#define CONFIG_SYS_MMC_ENV_DEV 0
> +#define CONFIG_ENV_SIZE 4096
> +#define CONFIG_ENV_OFFSET ((32 - 4) << 10)/* 32KiB - 4KiB */
> +
> +#define CONFIG_DOS_PARTITION
> +
> +#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_LOAD_ADDR -
> GENERATED_GBL_DATA_SIZE)
> +
> +#define CONFIG_SYS_CACHELINE_SIZE 32
> +
> +#endif /* __CONFIG_H */
> --
> 1.7.2.3
>
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot
>
--
with warm regards,
Chander Kashyap
More information about the U-Boot
mailing list