[U-Boot] toolchains toolchains toolchains

Bryan Hundven bryanhundven at gmail.com
Fri Nov 18 21:24:11 CET 2011


On Fri, Nov 18, 2011 at 12:20 PM, Mike Frysinger <vapier at gentoo.org> wrote:
> if you're like me, getting toolchains known to work has always been
> problematic for the arches you don't care about.  yes, there's the ELDK, but
> that doesn't cover all the arches that u-boot supports, and imo, they're
> "fatter" than necessary.
>
> to that end, i've started posting toolchain builds here:
>        http://dev.gentoo.org/~vapier/u-boot/
> ~5MiB d/l is nice :)
>
> when possible, i built them which means they're recent: binutils-2.21.1 and
> gcc-4.6.2.  they were also built on an older glibc (2.4), so they should be
> usable on quite a lot of recent (and not so recent) systems.  and i've
> statically linked in all the 3rd party libraries to avoid cross-distro issues
> (mpfr/gmp/mpc/etc...).
>
> is there interest/possibility of posting these to denx ftp and then putting
> the URL into the wiki/README ?  or perhaps the MAKEALL script when it can't
> find a usable toolchain ...
> -mike
>

Just curious, but have you tried crosstool-ng?
If you have and had problems with it, I would be happy to help.

Crosstool-ng also has static toolchain support.

-Bryan
 _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot
>
>


More information about the U-Boot mailing list