[U-Boot] [RFC PATCH 0/3] tegra2: Add paz00 support

[Marc Dietrich]

On Sunday 20 November 2011 13:05:58 Thierry Reding wrote:
> * Stephen Warren wrote:
> > This patch series adds support for the Toshiba AC100 Tegra netbook.
> > 
> > I'm posting it as an RFC because:
> > 
> > a) The AC100 is designed by Compal and marketed by Toshiba. Should we
> > put
> > the files into board/nvidia (since it uses an NVIDIA SoC), or create a
> > board/toshiba or board/compal directory to contain this?
> 
> I don't think it should go into board/nvidia. Directories below board are
> supposed to be vendor directories and NVIDIA isn't the vendor of the AC100.
> I have a slight tendency for preferring toshiba over compal mostly because I
> think that's what people will be looking for first.

we had this discussion during addition of devicetree support to paz00 in the 
linux kernel already. The balance tended more into the direction of Compal, 
because 1) there exist two machines with different names with this board 
(Toshiba AC100 and Dynabook AZ) and 2) Toshibas/Dynabooks code name seems to 
be "Procyon" while paz00 is the code name at Compal. Having compal/paz00 in 
the kernel and Toshiba/procyon in u-boot would just add confusion and renaming 
everything is maybe not worth the effort (Toshiba/paz00 is totaly wrong).

Marc

> > b) It'll need rebasing on top of some of the many outstanding Tegra
> > patches before it can be applied.
> > 
> > Stephen Warren (3):
> >   MAINTAINERS: Fix my email address
> >   tegra2: Fix conflicting pinmux for UARTA
> >   tegra2: Add support for Paz00 (Toshiba AC100)
> >  
> >  MAINTAINERS                 |    3 +-
> >  board/nvidia/common/board.c |   12 ++++++
> >  board/nvidia/paz00/Makefile |   49 ++++++++++++++++++++++++
> >  board/nvidia/paz00/paz00.c  |   88
> >  +++++++++++++++++++++++++++++++++++++++++++ boards.cfg               
> >    |    1 +
> >  include/configs/paz00.h     |   59 +++++++++++++++++++++++++++++
> >  6 files changed, 211 insertions(+), 1 deletions(-)
> >  create mode 100644 board/nvidia/paz00/Makefile
> >  create mode 100644 board/nvidia/paz00/paz00.c
> >  create mode 100644 include/configs/paz00.h