[U-Boot] [PATCH 6/9] ARM: tny_a9260: re-add MACH_TYPE_TNY_A9G20 and MACH_TYPE_TNY_A9260

Anatolij Gustschin agust at denx.de
Mon Nov 21 19:57:39 CET 2011


Dear Albin Tonnerre,

On Sat, 19 Nov 2011 12:59:13 +0100
Anatolij Gustschin <agust at denx.de> wrote:

> MACH_TYPE_TNY_A9G20 and MACH_TYPE_TNY_A9260 were removed
> from mach-types.h. Add them to the board config file.

Could you please look at this patch and send your
Acked-by if the patch is okay?

Thanks,
Anatolij

> 
> Signed-off-by: Anatolij Gustschin <agust at denx.de>
> ---
>  board/calao/tny_a9260/tny_a9260.c |    5 -----
>  include/configs/tny_a9260.h       |    4 ++++
>  2 files changed, 4 insertions(+), 5 deletions(-)
> 
> diff --git a/board/calao/tny_a9260/tny_a9260.c b/board/calao/tny_a9260/tny_a9260.c
> index ab51a33..a472b91 100644
> --- a/board/calao/tny_a9260/tny_a9260.c
> +++ b/board/calao/tny_a9260/tny_a9260.c
> @@ -86,11 +86,6 @@ int board_init(void)
>  	/* Enable Ctrlc */
>  	console_init_f();
>  
> -#if defined(CONFIG_TNY_A9260)
> -	gd->bd->bi_arch_number = MACH_TYPE_TNY_A9260;
> -#elif defined(CONFIG_TNY_A9G20)
> -	gd->bd->bi_arch_number = MACH_TYPE_TNY_A9G20;
> -#endif
>  	/* adress of boot parameters */
>  	gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
>  
> diff --git a/include/configs/tny_a9260.h b/include/configs/tny_a9260.h
> index 986aeba..c632de6 100644
> --- a/include/configs/tny_a9260.h
> +++ b/include/configs/tny_a9260.h
> @@ -45,8 +45,12 @@
>  /* Define actual evaluation board type from used processor type */
>  #ifdef CONFIG_AT91SAM9G20
>  # define CONFIG_TNY_A9G20
> +# define MACH_TYPE_TNY_A9G20		2059
> +# define CONFIG_MACH_TYPE		MACH_TYPE_TNY_A9G20
>  #else
>  # define CONFIG_TNY_A9260
> +# define MACH_TYPE_TNY_A9260		2058
> +# define CONFIG_MACH_TYPE		MACH_TYPE_TNY_A9260
>  #endif
>  
>  /* ARM asynchronous clock */


More information about the U-Boot mailing list