[U-Boot] [PATCH] MX: serial_mxc: cleanup removing nasty #ifdef

Stefano Babic sbabic at denx.de
Tue Nov 22 16:51:48 CET 2011 

The serial driver for iMX SOCs is continuosly changed if a
new SOC or not yet used port is used. CONFIG_SYS_<SOC>_<UART Port>
defines were used only to find the base address for the selected UART.
Instead of that, move the base address to the board configuration
file and drop all #ifdef from driver.

Signed-off-by: Stefano Babic <sbabic at denx.de>
CC: Marek Vasut <marek.vasut at gmail.com>
CC: Wolfgang Denk <wd at denx.de>
CC: Fabio Estevam <fabio.estevam at freescale.com>
CC: Helmut Raiger <helmut.raiger at hale.at>
CC: John Rigby <jcrigby at gmail.com>
CC: Matthias Weisser <weisserm at arcor.de>
CC: Jason Liu <jason.hui at linaro.org>
---
 arch/arm/cpu/arm1136/mx31/devices.c       |    4 ---
 arch/arm/include/asm/arch-mx25/imx-regs.h |   10 ++++----
 arch/arm/include/asm/arch-mx27/imx-regs.h |    8 +++---
 arch/arm/include/asm/arch-mx31/imx-regs.h |    6 ++++
 arch/arm/include/asm/arch-mx35/imx-regs.h |    6 ++--
 arch/arm/include/asm/arch-mx5/imx-regs.h  |    6 ++--
 drivers/serial/serial_mxc.c               |   37 +++-------------------------
 include/configs/efikamx.h                 |    2 +-
 include/configs/flea3.h                   |    2 +-
 include/configs/imx27lite-common.h        |    2 +-
 include/configs/imx31_litekit.h           |    4 +-
 include/configs/imx31_phycore.h           |    2 +-
 include/configs/mx25pdk.h                 |    2 +-
 include/configs/mx31ads.h                 |    4 +-
 include/configs/mx31pdk.h                 |    2 +-
 include/configs/mx35pdk.h                 |    2 +-
 include/configs/mx51evk.h                 |    2 +-
 include/configs/mx53ard.h                 |    2 +-
 include/configs/mx53evk.h                 |    2 +-
 include/configs/mx53loco.h                |    2 +-
 include/configs/mx53smd.h                 |    2 +-
 include/configs/qong.h                    |    4 +-
 include/configs/tt01.h                    |    2 +-
 include/configs/tx25.h                    |    2 +-
 include/configs/vision2.h                 |    2 +-
 include/configs/zmx25.h                   |    2 +-
 26 files changed, 47 insertions(+), 74 deletions(-)

diff --git a/arch/arm/cpu/arm1136/mx31/devices.c b/arch/arm/cpu/arm1136/mx31/devices.c
index b42dac3..2ebee2e 100644
--- a/arch/arm/cpu/arm1136/mx31/devices.c
+++ b/arch/arm/cpu/arm1136/mx31/devices.c
@@ -27,7 +27,6 @@
 #include <asm/arch/imx-regs.h>
 #include <asm/arch/clock.h>
 
-#ifdef CONFIG_SYS_MX31_UART1
 void mx31_uart1_hw_init(void)
 {
 	/* setup pins for UART1 */
@@ -36,9 +35,7 @@ void mx31_uart1_hw_init(void)
 	mx31_gpio_mux(MUX_RTS1__UART1_RTS_B);
 	mx31_gpio_mux(MUX_CTS1__UART1_CTS_B);
 }
-#endif
 
-#ifdef CONFIG_SYS_MX31_UART2
 void mx31_uart2_hw_init(void)
 {
 	/* setup pins for UART2 */
@@ -47,7 +44,6 @@ void mx31_uart2_hw_init(void)
 	mx31_gpio_mux(MUX_RTS2__UART2_RTS_B);
 	mx31_gpio_mux(MUX_CTS2__UART2_CTS_B);
 }
-#endif
 
 #ifdef CONFIG_MXC_SPI
 /*
diff --git a/arch/arm/include/asm/arch-mx25/imx-regs.h b/arch/arm/include/asm/arch-mx25/imx-regs.h
index eece138..7f9449b 100644
--- a/arch/arm/include/asm/arch-mx25/imx-regs.h
+++ b/arch/arm/include/asm/arch-mx25/imx-regs.h
@@ -180,8 +180,8 @@ struct aips_regs {
 #define IMX_I2C3_BASE		(0x43F84000)
 #define IMX_CAN1_BASE		(0x43F88000)
 #define IMX_CAN2_BASE		(0x43F8C000)
-#define IMX_UART1_BASE		(0x43F90000)
-#define IMX_UART2_BASE		(0x43F94000)
+#define UART1_BASE		(0x43F90000)
+#define UART2_BASE		(0x43F94000)
 #define IMX_I2C2_BASE		(0x43F98000)
 #define IMX_OWIRE_BASE		(0x43F9C000)
 #define IMX_CSPI1_BASE		(0x43FA4000)
@@ -197,15 +197,15 @@ struct aips_regs {
 /* SPBA */
 #define IMX_SPBA_BASE		(0x50000000)
 #define IMX_CSPI3_BASE		(0x50004000)
-#define IMX_UART4_BASE		(0x50008000)
-#define IMX_UART3_BASE		(0x5000C000)
+#define UART4_BASE		(0x50008000)
+#define UART3_BASE		(0x5000C000)
 #define IMX_CSPI2_BASE		(0x50010000)
 #define IMX_SSI2_BASE		(0x50014000)
 #define IMX_ESAI_BASE		(0x50018000)
 #define IMX_ATA_DMA_BASE	(0x50020000)
 #define IMX_SIM1_BASE		(0x50024000)
 #define IMX_SIM2_BASE		(0x50028000)
-#define IMX_UART5_BASE		(0x5002C000)
+#define UART5_BASE		(0x5002C000)
 #define IMX_TSC_BASE		(0x50030000)
 #define IMX_SSI1_BASE		(0x50034000)
 #define IMX_FEC_BASE		(0x50038000)
diff --git a/arch/arm/include/asm/arch-mx27/imx-regs.h b/arch/arm/include/asm/arch-mx27/imx-regs.h
index 83ab216..ced5b2a 100644
--- a/arch/arm/include/asm/arch-mx27/imx-regs.h
+++ b/arch/arm/include/asm/arch-mx27/imx-regs.h
@@ -224,10 +224,10 @@ struct fuse_bank0_regs {
 #define IMX_TIM1_BASE		(0x03000 + IMX_IO_BASE)
 #define IMX_TIM2_BASE		(0x04000 + IMX_IO_BASE)
 #define IMX_TIM3_BASE		(0x05000 + IMX_IO_BASE)
-#define IMX_UART1_BASE		(0x0a000 + IMX_IO_BASE)
-#define IMX_UART2_BASE		(0x0b000 + IMX_IO_BASE)
-#define IMX_UART3_BASE		(0x0c000 + IMX_IO_BASE)
-#define IMX_UART4_BASE		(0x0d000 + IMX_IO_BASE)
+#define UART1_BASE		(0x0a000 + IMX_IO_BASE)
+#define UART2_BASE		(0x0b000 + IMX_IO_BASE)
+#define UART3_BASE		(0x0c000 + IMX_IO_BASE)
+#define UART4_BASE		(0x0d000 + IMX_IO_BASE)
 #define IMX_I2C1_BASE		(0x12000 + IMX_IO_BASE)
 #define IMX_GPIO_BASE		(0x15000 + IMX_IO_BASE)
 #define IMX_TIM4_BASE		(0x19000 + IMX_IO_BASE)
diff --git a/arch/arm/include/asm/arch-mx31/imx-regs.h b/arch/arm/include/asm/arch-mx31/imx-regs.h
index 0147920..6a517dd 100644
--- a/arch/arm/include/asm/arch-mx31/imx-regs.h
+++ b/arch/arm/include/asm/arch-mx31/imx-regs.h
@@ -600,6 +600,12 @@ struct esdc_regs {
 #define WEIM_ESDCFG1	0xB800100C
 #define WEIM_ESDMISC	0xB8001010
 
+#define UART1_BASE	0x43F90000
+#define UART2_BASE	0x43F94000
+#define UART3_BASE	0x5000C000
+#define UART4_BASE	0x43FB0000
+#define UART5_BASE	0x43FB4000
+
 #define ESDCTL_SDE			(1 << 31)
 #define ESDCTL_CMD_RW			(0 << 28)
 #define ESDCTL_CMD_PRECHARGE		(1 << 28)
diff --git a/arch/arm/include/asm/arch-mx35/imx-regs.h b/arch/arm/include/asm/arch-mx35/imx-regs.h
index 25c324e..df74508 100644
--- a/arch/arm/include/asm/arch-mx35/imx-regs.h
+++ b/arch/arm/include/asm/arch-mx35/imx-regs.h
@@ -42,8 +42,8 @@
 #define I2C_BASE_ADDR           0x43F80000
 #define I2C3_BASE_ADDR          0x43F84000
 #define ATA_BASE_ADDR           0x43F8C000
-#define UART1_BASE_ADDR         0x43F90000
-#define UART2_BASE_ADDR         0x43F94000
+#define UART1_BASE		0x43F90000
+#define UART2_BASE		0x43F94000
 #define I2C2_BASE_ADDR          0x43F98000
 #define CSPI1_BASE_ADDR         0x43FA4000
 #define IOMUXC_BASE_ADDR        0x43FAC000
@@ -52,7 +52,7 @@
  * SPBA
  */
 #define SPBA_BASE_ADDR          0x50000000
-#define UART3_BASE_ADDR         0x5000C000
+#define UART3_BASE		0x5000C000
 #define CSPI2_BASE_ADDR         0x50010000
 #define ATA_DMA_BASE_ADDR       0x50020000
 #define FEC_BASE_ADDR           0x50038000
diff --git a/arch/arm/include/asm/arch-mx5/imx-regs.h b/arch/arm/include/asm/arch-mx5/imx-regs.h
index d069209..0ee88d2 100644
--- a/arch/arm/include/asm/arch-mx5/imx-regs.h
+++ b/arch/arm/include/asm/arch-mx5/imx-regs.h
@@ -54,7 +54,7 @@
  */
 #define MMC_SDHC1_BASE_ADDR	(SPBA0_BASE_ADDR + 0x00004000)
 #define MMC_SDHC2_BASE_ADDR	(SPBA0_BASE_ADDR + 0x00008000)
-#define UART3_BASE_ADDR 	(SPBA0_BASE_ADDR + 0x0000C000)
+#define UART3_BASE		(SPBA0_BASE_ADDR + 0x0000C000)
 #define CSPI1_BASE_ADDR 	(SPBA0_BASE_ADDR + 0x00010000)
 #define SSI2_BASE_ADDR		(SPBA0_BASE_ADDR + 0x00014000)
 #define MMC_SDHC3_BASE_ADDR	(SPBA0_BASE_ADDR + 0x00020000)
@@ -83,8 +83,8 @@
 #define EPIT2_BASE_ADDR		(AIPS1_BASE_ADDR + 0x000B0000)
 #define PWM1_BASE_ADDR		(AIPS1_BASE_ADDR + 0x000B4000)
 #define PWM2_BASE_ADDR		(AIPS1_BASE_ADDR + 0x000B8000)
-#define UART1_BASE_ADDR		(AIPS1_BASE_ADDR + 0x000BC000)
-#define UART2_BASE_ADDR		(AIPS1_BASE_ADDR + 0x000C0000)
+#define UART1_BASE		(AIPS1_BASE_ADDR + 0x000BC000)
+#define UART2_BASE		(AIPS1_BASE_ADDR + 0x000C0000)
 #define SRC_BASE_ADDR		(AIPS1_BASE_ADDR + 0x000D0000)
 #define CCM_BASE_ADDR		(AIPS1_BASE_ADDR + 0x000D4000)
 #define GPC_BASE_ADDR		(AIPS1_BASE_ADDR + 0x000D8000)
diff --git a/drivers/serial/serial_mxc.c b/drivers/serial/serial_mxc.c
index dcb4bd1..af00b9c 100644
--- a/drivers/serial/serial_mxc.c
+++ b/drivers/serial/serial_mxc.c
@@ -24,41 +24,12 @@
 
 #define __REG(x)     (*((volatile u32 *)(x)))
 
-#if defined(CONFIG_SYS_MX31_UART1) || defined(CONFIG_SYS_MX25_UART1)
-#define UART_PHYS 0x43f90000
-#elif defined(CONFIG_SYS_MX31_UART2) || defined(CONFIG_SYS_MX25_UART2)
-#define UART_PHYS 0x43f94000
-#elif defined(CONFIG_SYS_MX31_UART3) || defined(CONFIG_SYS_MX25_UART3)
-#define UART_PHYS 0x5000c000
-#elif defined(CONFIG_SYS_MX31_UART4) || defined(CONFIG_SYS_MX25_UART4)
-#define UART_PHYS 0x43fb0000
-#elif defined(CONFIG_SYS_MX31_UART5) || defined(CONFIG_SYS_MX25_UART5)
-#define UART_PHYS 0x43fb4000
-#elif defined(CONFIG_SYS_MX27_UART1)
-#define UART_PHYS 0x1000a000
-#elif defined(CONFIG_SYS_MX27_UART2)
-#define UART_PHYS 0x1000b000
-#elif defined(CONFIG_SYS_MX27_UART3)
-#define UART_PHYS 0x1000c000
-#elif defined(CONFIG_SYS_MX27_UART4)
-#define UART_PHYS 0x1000d000
-#elif defined(CONFIG_SYS_MX27_UART5)
-#define UART_PHYS 0x1001b000
-#elif defined(CONFIG_SYS_MX27_UART6)
-#define UART_PHYS 0x1001c000
-#elif defined(CONFIG_SYS_MX35_UART1) || defined(CONFIG_SYS_MX51_UART1) || \
-	defined(CONFIG_SYS_MX53_UART1)
-#define UART_PHYS UART1_BASE_ADDR
-#elif defined(CONFIG_SYS_MX35_UART2) || defined(CONFIG_SYS_MX51_UART2) || \
-	defined(CONFIG_SYS_MX53_UART2)
-#define UART_PHYS UART2_BASE_ADDR
-#elif defined(CONFIG_SYS_MX35_UART3) || defined(CONFIG_SYS_MX51_UART3) || \
-	defined(CONFIG_SYS_MX53_UART3)
-#define UART_PHYS UART3_BASE_ADDR
-#else
-#error "define CONFIG_SYS_MXxx_UARTx to use the MXC UART driver"
+#ifndef CONFIG_MXC_UART_BASE
+#error "define CONFIG_MXC_UART_BASE to use the MXC UART driver"
 #endif
 
+#define UART_PHYS	CONFIG_MXC_UART_BASE
+
 #ifdef CONFIG_SERIAL_MULTI
 #warning "MXC driver does not support MULTI serials."
 #endif
diff --git a/include/configs/efikamx.h b/include/configs/efikamx.h
index a07c8b5..2b069d6 100644
--- a/include/configs/efikamx.h
+++ b/include/configs/efikamx.h
@@ -85,7 +85,7 @@
  * Hardware drivers
  */
 #define CONFIG_MXC_UART
-#define CONFIG_SYS_MX51_UART1
+#define CONFIG_MXC_UART_BASE		UART1_BASE
 #define CONFIG_CONS_INDEX		1
 #define CONFIG_BAUDRATE			115200
 #define CONFIG_SYS_BAUDRATE_TABLE	{9600, 19200, 38400, 57600, 115200}
diff --git a/include/configs/flea3.h b/include/configs/flea3.h
index d88c578..20100c2 100644
--- a/include/configs/flea3.h
+++ b/include/configs/flea3.h
@@ -77,7 +77,7 @@
  * UART (console)
  */
 #define CONFIG_MXC_UART
-#define CONFIG_SYS_MX35_UART3
+#define CONFIG_MXC_UART_BASE	UART3_BASE
 
 /* allow to overwrite serial and ethaddr */
 #define CONFIG_ENV_OVERWRITE
diff --git a/include/configs/imx27lite-common.h b/include/configs/imx27lite-common.h
index 6953a80..2af4e7a 100644
--- a/include/configs/imx27lite-common.h
+++ b/include/configs/imx27lite-common.h
@@ -102,7 +102,7 @@
  * Serial Driver info
  */
 #define CONFIG_MXC_UART
-#define CONFIG_SYS_MX27_UART1
+#define CONFIG_MXC_UART_BASE	UART1_BASE
 #define CONFIG_CONS_INDEX	1		/* use UART0 for console */
 #define CONFIG_BAUDRATE		115200		/* Default baud rate */
 #define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
diff --git a/include/configs/imx31_litekit.h b/include/configs/imx31_litekit.h
index 1455ea2..bbcbce1 100644
--- a/include/configs/imx31_litekit.h
+++ b/include/configs/imx31_litekit.h
@@ -63,8 +63,8 @@
  * Hardware drivers
  */
 
-#define CONFIG_MXC_UART	1
-#define CONFIG_SYS_MX31_UART1		1
+#define CONFIG_MXC_UART
+#define CONFIG_MXC_UART_BASE	UART1_BASE
 #define CONFIG_MXC_GPIO
 
 #define CONFIG_HARD_SPI		1
diff --git a/include/configs/imx31_phycore.h b/include/configs/imx31_phycore.h
index 1b75197..3153eb5 100644
--- a/include/configs/imx31_phycore.h
+++ b/include/configs/imx31_phycore.h
@@ -59,7 +59,7 @@
 #define CONFIG_SYS_I2C_SLAVE		0xfe
 
 #define CONFIG_MXC_UART
-#define CONFIG_SYS_MX31_UART1
+#define CONFIG_MXC_UART_BASE		UART1_BASE
 
 /* allow to overwrite serial and ethaddr */
 #define CONFIG_ENV_OVERWRITE
diff --git a/include/configs/mx25pdk.h b/include/configs/mx25pdk.h
index 8414376..d1ba02b 100644
--- a/include/configs/mx25pdk.h
+++ b/include/configs/mx25pdk.h
@@ -54,7 +54,7 @@
 
 /* Serial Info */
 #define CONFIG_MXC_UART
-#define CONFIG_SYS_MX25_UART1
+#define CONFIG_MXC_UART_BASE	UART1_BASE
 #define CONFIG_CONS_INDEX	1	/* use UART0 for console */
 #define CONFIG_BAUDRATE		115200	/* Default baud rate */
 #define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
diff --git a/include/configs/mx31ads.h b/include/configs/mx31ads.h
index 7e011ae..87638a4 100644
--- a/include/configs/mx31ads.h
+++ b/include/configs/mx31ads.h
@@ -60,8 +60,8 @@
  * Hardware drivers
  */
 
-#define CONFIG_MXC_UART	1
-#define CONFIG_SYS_MX31_UART1		1
+#define CONFIG_MXC_UART
+#define CONFIG_MXC_UART_BASE	UART1_BASE
 
 #define CONFIG_HARD_SPI		1
 #define CONFIG_MXC_SPI		1
diff --git a/include/configs/mx31pdk.h b/include/configs/mx31pdk.h
index 4253c3e..4da6020 100644
--- a/include/configs/mx31pdk.h
+++ b/include/configs/mx31pdk.h
@@ -61,7 +61,7 @@
  */
 
 #define CONFIG_MXC_UART
-#define CONFIG_SYS_MX31_UART1
+#define CONFIG_MXC_UART_BASE	UART1_BASE
 #define CONFIG_HW_WATCHDOG
 #define CONFIG_MXC_GPIO
 
diff --git a/include/configs/mx35pdk.h b/include/configs/mx35pdk.h
index 32ed609..0c62b9f 100644
--- a/include/configs/mx35pdk.h
+++ b/include/configs/mx35pdk.h
@@ -85,7 +85,7 @@
  * UART (console)
  */
 #define CONFIG_MXC_UART
-#define CONFIG_SYS_MX35_UART1
+#define CONFIG_MXC_UART_BASE	UART1_BASE
 
 /* allow to overwrite serial and ethaddr */
 #define CONFIG_ENV_OVERWRITE
diff --git a/include/configs/mx51evk.h b/include/configs/mx51evk.h
index 7c7544f..dd53f48 100644
--- a/include/configs/mx51evk.h
+++ b/include/configs/mx51evk.h
@@ -59,7 +59,7 @@
  * Hardware drivers
  */
 #define CONFIG_MXC_UART
-#define CONFIG_SYS_MX51_UART1
+#define CONFIG_MXC_UART_BASE	UART1_BASE
 #define CONFIG_MXC_GPIO
 
 /*
diff --git a/include/configs/mx53ard.h b/include/configs/mx53ard.h
index 15dfcb4..f48a41e 100644
--- a/include/configs/mx53ard.h
+++ b/include/configs/mx53ard.h
@@ -44,7 +44,7 @@
 #define CONFIG_MXC_GPIO
 
 #define CONFIG_MXC_UART
-#define CONFIG_SYS_MX53_UART1
+#define CONFIG_MXC_UART_BASE	UART1_BASE
 
 /* I2C Configs */
 #define CONFIG_CMD_I2C
diff --git a/include/configs/mx53evk.h b/include/configs/mx53evk.h
index 7c49136..11fe6ef 100644
--- a/include/configs/mx53evk.h
+++ b/include/configs/mx53evk.h
@@ -47,7 +47,7 @@
 #define CONFIG_MXC_GPIO
 
 #define CONFIG_MXC_UART
-#define CONFIG_SYS_MX53_UART1
+#define CONFIG_MXC_UART_BASE	UART1_BASE
 
 /* I2C Configs */
 #define CONFIG_CMD_I2C
diff --git a/include/configs/mx53loco.h b/include/configs/mx53loco.h
index d699010..537649e 100644
--- a/include/configs/mx53loco.h
+++ b/include/configs/mx53loco.h
@@ -45,7 +45,7 @@
 #define CONFIG_MXC_GPIO
 
 #define CONFIG_MXC_UART
-#define CONFIG_SYS_MX53_UART1
+#define CONFIG_MXC_UART_BASE	UART1_BASE
 
 /* MMC Configs */
 #define CONFIG_FSL_ESDHC
diff --git a/include/configs/mx53smd.h b/include/configs/mx53smd.h
index 48b32dd..032f722 100644
--- a/include/configs/mx53smd.h
+++ b/include/configs/mx53smd.h
@@ -44,7 +44,7 @@
 #define CONFIG_MXC_GPIO
 
 #define CONFIG_MXC_UART
-#define CONFIG_SYS_MX53_UART1
+#define CONFIG_MXC_UART_BASE	UART1_BASE
 
 /* I2C Configs */
 #define CONFIG_CMD_I2C
diff --git a/include/configs/qong.h b/include/configs/qong.h
index 3346802..3e36bb0 100644
--- a/include/configs/qong.h
+++ b/include/configs/qong.h
@@ -49,8 +49,8 @@
  * Hardware drivers
  */
 
-#define CONFIG_MXC_UART	1
-#define CONFIG_SYS_MX31_UART1	1
+#define CONFIG_MXC_UART
+#define CONFIG_MXC_UART_BASE	UART1_BASE
 
 #define CONFIG_MXC_GPIO
 #define CONFIG_HW_WATCHDOG
diff --git a/include/configs/tt01.h b/include/configs/tt01.h
index 6ef25cd..a553712 100644
--- a/include/configs/tt01.h
+++ b/include/configs/tt01.h
@@ -148,7 +148,7 @@
  * make sure that the transceiver is enabled during PL=1 for testing!
  */
 #define CONFIG_MXC_UART
-#define CONFIG_SYS_MX31_UART2
+#define CONFIG_MXC_UART_BASE	UART2_BASE
 
 #define CONFIG_MXC_SPI
 #define CONFIG_MXC_GPIO
diff --git a/include/configs/tx25.h b/include/configs/tx25.h
index f77c546..87bd8a6 100644
--- a/include/configs/tx25.h
+++ b/include/configs/tx25.h
@@ -90,7 +90,7 @@
  * Serial Info
  */
 #define CONFIG_MXC_UART
-#define CONFIG_SYS_MX25_UART1
+#define CONFIG_MXC_UART_BASE	UART1_BASE
 #define CONFIG_CONS_INDEX	1	/* use UART0 for console */
 #define CONFIG_BAUDRATE		115200	/* Default baud rate */
 #define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
diff --git a/include/configs/vision2.h b/include/configs/vision2.h
index f321ad2..35b71f7 100644
--- a/include/configs/vision2.h
+++ b/include/configs/vision2.h
@@ -54,7 +54,7 @@
  * Hardware drivers
  */
 #define CONFIG_MXC_UART
-#define CONFIG_SYS_MX51_UART3
+#define CONFIG_MXC_UART_BASE	UART3_BASE
 #define CONFIG_MXC_GPIO
 #define CONFIG_MXC_SPI
 #define CONFIG_HW_WATCHDOG
diff --git a/include/configs/zmx25.h b/include/configs/zmx25.h
index 9a7a27a..599d5bb 100644
--- a/include/configs/zmx25.h
+++ b/include/configs/zmx25.h
@@ -66,7 +66,7 @@
  * Serial
  */
 #define CONFIG_MXC_UART
-#define CONFIG_SYS_MX25_UART2
+#define CONFIG_MXC_UART_BASE	UART2_BASE
 #define CONFIG_CONS_INDEX	1	/* use UART2 for console */
 #define CONFIG_BAUDRATE		115200	/* Default baud rate */
 #define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
-- 
1.7.5.4

More information about the U-Boot mailing list