[U-Boot] [PATCH v3]ulpi: add generic ULPI functionality
Igor Grinberg
grinberg at compulab.co.il
Thu Nov 24 14:26:10 CET 2011
Hi Jana,
Good job!
IMO, this version looks much better
(although Marek is not happy with its schedule).
Some final neats below and we're done.
On 11/24/11 14:22, Jana Rapava wrote:
> Add generic functions for ULPI init and setting bits in
> ULPI registers.
>
> Signed-off-by: Jana Rapava <fermata7 at gmail.com>
> Cc: Marek Vasut <marek.vasut at gmail.com>
> Cc: Remy Bohmer <linux at bohmer.net>
> Cc: Stefano Babic <sbabic at denx.de>
> Cc: Igor Grinberg <grinberg at compulab.co.il>
> Cc: Wolfgang Grandegger <wg at denx.de>
> ---
> Changes for v2:
> - make code EHCI-independent
> - use udelay() in waiting loop
> - mark static functions as static
> - naming changes
> Changes for v3:
> - merge with patch ulpi: add generic ULPI support header file
> - rewrite ULPI interface in more functionality-oriented way
>
> Makefile | 1 +
> drivers/usb/ulpi/Makefile | 45 ++++++++
> drivers/usb/ulpi/ulpi-viewport.c | 88 +++++++++++++++
> drivers/usb/ulpi/ulpi.c | 199 ++++++++++++++++++++++++++++++++++
> include/usb/ulpi.h | 222 ++++++++++++++++++++++++++++++++++++++
> 5 files changed, 555 insertions(+), 0 deletions(-)
> create mode 100644 drivers/usb/ulpi/Makefile
> create mode 100644 drivers/usb/ulpi/ulpi-viewport.c
> create mode 100644 drivers/usb/ulpi/ulpi.c
> create mode 100644 include/usb/ulpi.h
>
> diff --git a/Makefile b/Makefile
> index dfe939f..70a1e1e 100644
> --- a/Makefile
> +++ b/Makefile
> @@ -272,6 +272,7 @@ LIBS += drivers/usb/gadget/libusb_gadget.o
> LIBS += drivers/usb/host/libusb_host.o
> LIBS += drivers/usb/musb/libusb_musb.o
> LIBS += drivers/usb/phy/libusb_phy.o
> +LIBS += drivers/usb/ulpi/libusb_ulpi.o
> LIBS += drivers/video/libvideo.o
> LIBS += drivers/watchdog/libwatchdog.o
> LIBS += common/libcommon.o
> diff --git a/drivers/usb/ulpi/Makefile b/drivers/usb/ulpi/Makefile
> new file mode 100644
> index 0000000..a1a2244
> --- /dev/null
> +++ b/drivers/usb/ulpi/Makefile
> @@ -0,0 +1,45 @@
> +#
> +# Copyright (C) 2011 Jana Rapava <fermata7 at gmail.com>
> +# See file CREDITS for list of people who contributed to this
> +# project.
> +#
> +# This program is free software; you can redistribute it and/or
> +# modify it under the terms of the GNU General Public License as
> +# published by the Free Software Foundation; either version 2 of
> +# the License, or (at your option) any later version.
> +#
> +# This program is distributed in the hope that it will be useful,
> +# but WITHOUT ANY WARRANTY; without even the implied warranty of
> +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> +# GNU General Public License for more details.
> +#
> +# You should have received a copy of the GNU General Public License
> +# along with this program; if not, write to the Free Software
> +# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
> +# MA 02111-1307 USA
> +#
> +
> +include $(TOPDIR)/config.mk
> +
> +LIB := $(obj)libusb_ulpi.o
> +
> +COBJS-$(CONFIG_USB_ULPI) += ulpi.o
> +COBJS-$(CONFIG_USB_ULPI_VIEWPORT) += ulpi-viewport.o
> +
> +COBJS := $(COBJS-y)
> +SRCS := $(COBJS:.o=.c)
> +OBJS := $(addprefix $(obj),$(COBJS))
> +
> +all: $(LIB)
> +
> +$(LIB): $(obj).depend $(OBJS)
> + $(call cmd_link_o_target, $(OBJS))
> +
> +#########################################################################
> +
> +# defines $(obj).depend target
> +include $(SRCTREE)/rules.mk
> +
> +sinclude $(obj).depend
> +
> +#########################################################################
> diff --git a/drivers/usb/ulpi/ulpi-viewport.c b/drivers/usb/ulpi/ulpi-viewport.c
> new file mode 100644
> index 0000000..9a1f59f
> --- /dev/null
> +++ b/drivers/usb/ulpi/ulpi-viewport.c
> @@ -0,0 +1,88 @@
> +/*
> + * Copyright (C) 2011 Jana Rapava <fermata7 at gmail.com>
> + * Based on:
> + * linux/drivers/usb/otg/ulpi_viewport.c
> + *
> + * Original Copyright follow:
> + * Copyright (C) 2011 Google, Inc.
> + *
> + * This software is licensed under the terms of the GNU General Public
> + * License version 2, as published by the Free Software Foundation, and
> + * may be copied, distributed, and modified under those terms.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + */
> +
> +#include <common.h>
> +#include <asm/io.h>
> +#include <usb/ulpi.h>
> +
> +/* ULPI viewport control bits */
> +#define ULPI_WU (1 << 31)
> +#define ULPI_SS (1 << 27)
> +#define ULPI_RWRUN (1 << 30)
> +#define ULPI_RWCTRL (1 << 29)
> +
> +#define ULPI_ADDR_SHIFT 16
> +#define ulpi_write_mask(value) ((value) & 0xff)
> +#define ulpi_read_mask(value) (((value) >> 8) & 0xff)
> +
> +static int ulpi_wait(u32 ulpi_viewport, u32 ulpi_value, u32 ulpi_mask)
> +{
> + int timeout = CONFIG_USB_ULPI_TIMEOUT;
> + u32 tmp;
> +
> + writel(ulpi_value, ulpi_viewport);
> +
> + /* Wait for the bits in ulpi_mask to become zero. */
> + while (--timeout) {
> + tmp = readl(ulpi_viewport);
> + if (!(tmp & ulpi_mask))
> + break;
> + udelay(1);
> + }
> +
> + return !timeout;
> +}
> +
> +static int ulpi_wakeup(u32 ulpi_viewport)
> +{
> + if (readl(ulpi_viewport) & ULPI_SS)
> + return 0; /* already awake */
> +
> + return ulpi_wait(ulpi_viewport, ULPI_WU, ULPI_WU);
> +}
> +
> +void ulpi_write(u32 ulpi_viewport, u32 reg, u32 value)
Can this function also return an error value in case it fails (times out)?
This way the error can propagate to the user code.
> +{
> + u32 tmp;
> + if (ulpi_wakeup(ulpi_viewport)) {
> + printf("ULPI wakeup timed out\n");
> + return;
> + }
> +
> + tmp = ulpi_wait(ulpi_viewport, ULPI_RWRUN | ULPI_RWCTRL |
> + reg << ULPI_ADDR_SHIFT | ulpi_write_mask(value), ULPI_RWRUN);
> + if (tmp)
> + printf("ULPI write timed out\n");
> +}
> +
> +u32 ulpi_read(u32 ulpi_viewport, u32 reg)
> +{
> + if (ulpi_wakeup(ulpi_viewport)) {
> + printf("ULPI wakeup timed out\n");
> + return ULPI_ERROR;
> + }
> +
> + if (ulpi_wait(ulpi_viewport, ULPI_RWRUN | reg << ULPI_ADDR_SHIFT,
> + ULPI_RWRUN)) {
> + printf("ULPI read timed out\n");
> + return ULPI_ERROR;
> + }
> +
> + return ulpi_read_mask(readl(ulpi_viewport));
> +}
> diff --git a/drivers/usb/ulpi/ulpi.c b/drivers/usb/ulpi/ulpi.c
> new file mode 100644
> index 0000000..2d66e86
> --- /dev/null
> +++ b/drivers/usb/ulpi/ulpi.c
> @@ -0,0 +1,199 @@
> +/*
> + * Copyright (C) 2011 Jana Rapava <fermata7 at gmail.com>
> + * Based on:
> + * linux/drivers/usb/otg/ulpi.c
> + * Generic ULPI USB transceiver support
> + *
> + * Original Copyright follow:
> + * Copyright (C) 2009 Daniel Mack <daniel at caiaq.de>
> + *
> + * Based on sources from
> + *
> + * Sascha Hauer <s.hauer at pengutronix.de>
> + * Freescale Semiconductors
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + */
> +
> +#include <common.h>
> +#include <exports.h>
> +#include <usb/ulpi.h>
> +
> +static struct ulpi_regs *ulpi = (struct ulpi_regs *)0;
> +
> +static void ulpi_integrity_check(u32 ulpi_viewport)
> +{
> + u32 tmp = 0;
> + int i;
> + for (i = 0; i < 2; i++) {
> + ulpi_write(ulpi_viewport, (u32)&ulpi->scratch,
> + ULPI_TEST_VALUE << i);
> + tmp = ulpi_read(ulpi_viewport, (u32)&ulpi->scratch);
> +
> + if (tmp != (ULPI_TEST_VALUE << i)) {
> + printf("ULPI integrity check failed\n");
> + return;
I would expect this function to return a value, so it can be
propagated to the code using it.
> + }
> + }
> +}
> +
> +/*
> + * This function is used to select transceiver speed.
> + * Accepted parameter values are:
> + * ULPI_FC_HIGH_SPEED, ULPI_FC_FULL_SPEED, ULPI_FC_LOW_SPEED, ULPI_FC_FS4LS
> + * (FS transceiver for LS packets).
> + * Default value is ULPI_FC_FULL_SPEED.
> + */
> +void ulpi_select_transceiver(u32 ulpi_viewport, int speed)
same here... let the error propagate.
Please, fix it globally.
> +{
> + switch (speed) {
> + case ULPI_FC_HIGH_SPEED:
> + ulpi_write(ulpi_viewport, (u32)&ulpi->function_ctrl_set,
> + ULPI_FC_HIGH_SPEED);
> + break;
> + case ULPI_FC_FULL_SPEED:
> + ulpi_write(ulpi_viewport, (u32)&ulpi->function_ctrl_set,
> + ULPI_FC_FULL_SPEED);
> + break;
> + case ULPI_FC_LOW_SPEED:
> + ulpi_write(ulpi_viewport, (u32)&ulpi->function_ctrl_set,
> + ULPI_FC_LOW_SPEED);
> + break;
> + case ULPI_FC_FS4LS:
> + ulpi_write(ulpi_viewport, (u32)&ulpi->function_ctrl_set,
> + ULPI_FC_FS4LS);
each of the above ulpi_write() calls can fail...
Please, fix globally.
> + break;
> + default:
> + printf("ulpi_select_transceiver: unknown transceiver speed\n");
> + }
> +}
> +
> +/*
> + * Signals that 5V is driven to VBUS.
> + * Ext_power_supply is 1, if we use external supply instead of
> + * internal charge pump(which is default).
> + * Use_ext_indicator is 1, if we use external VBUS over-current indicator.
> + */
> +void ulpi_drive_vbus(u32 ulpi_viewport,
> + int ext_power_supply, int use_ext_indicator)
> +{
> + ulpi_write(ulpi_viewport, (u32)&ulpi->otg_ctrl_set, ULPI_OTG_DRVVBUS);
> +
> + if (ext_power_supply)
> + ulpi_write(ulpi_viewport,
> + (u32)&ulpi->otg_ctrl_set, ULPI_OTG_DRVVBUS_EXT);
> +
> + if (use_ext_indicator)
> + ulpi_write(ulpi_viewport,
> + (u32)&ulpi->otg_ctrl_set, ULPI_OTG_EXTVBUSIND);
> +}
> +
> +/*
> + * If enable is 0, pull-down resistor not connected to D+, else pull-down
> + * resistor connected to D+.
> + * Default behaviour is as for enable equal to 1.
> + */
> +void ulpi_dp_pulldown(u32 ulpi_viewport, int enable)
> +{
> + if (enable)
> + ulpi_write(ulpi_viewport,
> + (u32)&ulpi->otg_ctrl_set, ULPI_OTG_DP_PULLDOWN);
> + else
> + ulpi_write(ulpi_viewport,
> + (u32)&ulpi->otg_ctrl_clear, ULPI_OTG_DP_PULLDOWN);
> +}
> +
> +/*
> + * If enable is 0, pull-down resistor not connected to D- else pull-down
> + * resistor connected to D-.
> + * Default behaviour is as for enable equal to 1.
> + */
> +void ulpi_dm_pulldown(u32 ulpi_viewport, int enable)
> +{
> + if (enable)
> + ulpi_write(ulpi_viewport,
> + (u32)&ulpi->otg_ctrl_set, ULPI_OTG_DM_PULLDOWN);
> + else
> + ulpi_write(ulpi_viewport,
> + (u32)&ulpi->otg_ctrl_clear, ULPI_OTG_DM_PULLDOWN);
> +}
Correct me if I'm wrong, but I don't think there is a use for
the above functions in separate and the user will have to
call them both.
So, can these two functions be united in one,
say ulpi_pulldown(u32 ..., int enable)?
> +
> +/*
> + * This function is used to select bit encoding style.
> + * Accepted parameter values are:
> + * ULPI_FC_OPMODE_NORMAL, ULPI_FC_OPMODE_NONDRIVING,
> + * ULPI_FC_OPMODE_DISABLE_NRZI, ULPI_FC_OPMODE_NOSYNC_NOEOP.
> + * Default value is ULPI_FC_OPMODE_NORMAL.
> + */
> +void ulpi_select_opmode(u32 ulpi_viewport, int style)
> +{
> + switch (style) {
> + case ULPI_FC_OPMODE_NORMAL:
> + ulpi_write(ulpi_viewport, (u32)&ulpi->function_ctrl_set,
> + ULPI_FC_OPMODE_NORMAL);
> + break;
> + case ULPI_FC_OPMODE_NONDRIVING:
> + ulpi_write(ulpi_viewport, (u32)&ulpi->function_ctrl_set,
> + ULPI_FC_OPMODE_NONDRIVING);
> + break;
> + case ULPI_FC_OPMODE_DISABLE_NRZI:
> + ulpi_write(ulpi_viewport, (u32)&ulpi->function_ctrl_set,
> + ULPI_FC_OPMODE_DISABLE_NRZI);
> + break;
> + case ULPI_FC_OPMODE_NOSYNC_NOEOP:
> + ulpi_write(ulpi_viewport, (u32)&ulpi->function_ctrl_set,
> + ULPI_FC_OPMODE_NOSYNC_NOEOP);
> + break;
> + default:
> + printf("ulpi_select_opmode: unknown bit encoding style\n");
> + }
> +}
> +
> +/* Put PHY into low power mode. */
> +void ulpi_suspend(u32 ulpi_viewport)
> +{
> + ulpi_write(ulpi_viewport,
> + (u32)&ulpi->function_ctrl_clear, ULPI_FC_SUSPENDM);
> +}
> +
> +/* Put PHY out of low power mode. */
> +void ulpi_resume(u32 ulpi_viewport)
> +{
> + ulpi_write(ulpi_viewport,
> + (u32)&ulpi->function_ctrl_set, ULPI_FC_SUSPENDM);
> +}
> +
> +/* Reset transceiver, does not reset ULPI interface or ULPI register set. */
> +void ulpi_reset(u32 ulpi_viewport)
> +{
> + ulpi_write(ulpi_viewport, (u32)&ulpi->function_ctrl_set, ULPI_FC_RESET);
> +}
In two functions above, don't you need to wait for the operation to complete?
> +
> +/* Charge VBUS through a resistor */
> +void ulpi_charge_vbus(u32 ulpi_viewport)
> +{
> + ulpi_write(ulpi_viewport, (u32)&ulpi->otg_ctrl_set, ULPI_OTG_CHRGVBUS);
> +}
CHRGVBUS bit is used for SRP, and the above function does not implement
SRP by the spec. so it is wrong. Also, I don't think we need SRP in U-Boot,
but may be I'm wrong...
Now, I know you need to set this bit to workaround the efika bug...
But it does not belong to the generic driver!
What I suggest is, remove this function from here, and use ulpi_write()
directly, in places where you need to workaround that bug.
> +
> +void ulpi_init(u32 ulpi_viewport)
same here, how does the user code know, if init has succeeded?
> +{
> + u32 tmp = 0;
> + int reg;
> +
> + /* Assemble ID from four ULPI ID registers (8 bits each). */
> + for (reg = ULPI_ID_REGS_COUNT - 1; reg >= 0; reg--)
> + tmp |= ulpi_read(ulpi_viewport, reg) << (reg * 8);
> +
> + /* Split ID into vendor and product ID. */
> + debug("Found ULPI transceiver ID %04x:%04x\n", tmp >> 16, tmp & 0xffff);
> +
> + ulpi_integrity_check(ulpi_viewport);
> +}
> diff --git a/include/usb/ulpi.h b/include/usb/ulpi.h
> new file mode 100644
> index 0000000..834b5e8
> --- /dev/null
> +++ b/include/usb/ulpi.h
> @@ -0,0 +1,222 @@
> +/*
> + * Copyright (C) 2011 Jana Rapava <fermata7 at gmail.com>
> + * Based on:
> + * linux/include/linux/usb/ulpi.h
> + * ULPI defines and function prototypes
> + *
> + * Original Copyrights follow:
> + * Copyright (C) 2010 Nokia Corporation
> + *
> + * This software is distributed under the terms of the GNU General
> + * Public License ("GPL") as published by the Free Software Foundation,
> + * version 2 of that License.
> + */
> +
> +#ifndef __USB_ULPI_H
> +#define __USB_ULPI_H
> +
> +#define ULPI_ID_REGS_COUNT 4
> +#define ULPI_TEST_VALUE 0x55
> +/* value greater than 0xff indicates failure */
> +#define ULPI_ERROR (1 << 8)
> +
> +/* ULPI viewport control bits */
> +#define ULPI_WU (1 << 31)
> +#define ULPI_SS (1 << 27)
> +#define ULPI_RWRUN (1 << 30)
> +#define ULPI_RWCTRL (1 << 29)
> +
> +/* ULPI access modes */
> +#define ULPI_WRITE 0x00
> +#define ULPI_SET 0x01
> +#define ULPI_CLEAR 0x02
> +
> +struct ulpi_regs {
> + /* Vendor ID and Product ID: 0x00 - 0x03 Read-only */
> + u8 vendor_id_low;
> + u8 vendor_id_high;
> + u8 product_id_low;
> + u8 product_id_high;
> + /* Function Control: 0x04 - 0x06 Read */
> + u8 function_ctrl; /* 0x04 Write */
> + u8 function_ctrl_set; /* 0x05 Set */
> + u8 function_ctrl_clear; /* 0x06 Clear */
> + /* Interface Control: 0x07 - 0x09 Read */
> + u8 iface_ctrl; /* 0x07 Write */
> + u8 iface_ctrl_set; /* 0x08 Set */
> + u8 iface_ctrl_clear; /* 0x09 Clear */
> + /* OTG Control: 0x0A - 0x0C Read */
> + u8 otg_ctrl; /* 0x0A Write */
> + u8 otg_ctrl_set; /* 0x0B Set */
> + u8 otg_ctrl_clear; /* 0x0C Clear */
> + /* USB Interrupt Enable Rising: 0x0D - 0x0F Read */
> + u8 usb_ie_rising; /* 0x0D Write */
> + u8 usb_ie_rising_set; /* 0x0E Set */
> + u8 usb_ie_rising_clear; /* 0x0F Clear */
> + /* USB Interrupt Enable Falling: 0x10 - 0x12 Read */
> + u8 usb_ie_falling; /* 0x10 Write */
> + u8 usb_ie_falling_set; /* 0x11 Set */
> + u8 usb_ie_falling_clear; /* 0x12 Clear */
> + /* USB Interrupt Status: 0x13 Read-only */
> + u8 usb_int_status;
> + /* USB Interrupt Latch: 0x14 Read-only with auto-clear */
> + u8 usb_int_latch;
> + /* Debug: 0x15 Read-only */
> + u8 debug;
> + /* Scratch Register: 0x16 - 0x18 Read */
> + u8 scratch; /* 0x16 Write */
> + u8 scratch_set; /* 0x17 Set */
> + u8 scratch_clear; /* 0x18 Clear */
> + /*
> + * Optional Carkit registers
> + */
> + /* Carkit Control: 0x19 - 0x1B Read */
> + u8 carkit_ctrl; /* 0x19 Write */
> + u8 carkit_ctrl_set; /* 0x1A Set */
> + u8 carkit_ctrl_clear; /* 0x1B Clear */
> + /* Carkit Interrupt Delay: 0x1C Read, Write */
> + u8 carkit_int_delay;
> + /* Carkit Interrupt Enable: 0x1D - 0x1F Read */
> + u8 carkit_ie; /* 0x1D Write */
> + u8 carkit_ie_set; /* 0x1E Set */
> + u8 carkit_ie_clear; /* 0x1F Clear */
> + /* Carkit Interrupt Status: 0x20 Read-only */
> + u8 carkit_int_status;
> + /* Carkit Interrupt Latch: 0x21 Read-only with auto-clear */
> + u8 carkit_int_latch;
> + /* Carkit Pulse Control: 0x22 - 0x24 Read */
> + u8 carkit_pulse_ctrl; /* 0x22 Write */
> + u8 carkit_pulse_ctrl_set; /* 0x23 Set */
> + u8 carkit_pulse_ctrl_clear; /* 0x24 Clear */
> + /*
> + * Other optional registers
> + */
> + /* Transmit Positive Width: 0x25 Read, Write */
> + u8 transmit_pos_width;
> + /* Transmit Negative Width: 0x26 Read, Write */
> + u8 transmit_neg_width;
> + /* Receive Polarity Recovery: 0x27 Read, Write */
> + u8 recv_pol_recovery;
> + /*
> + * Addresses 0x28 - 0x2E are reserved, so we use offsets
> + * for immediate registers with higher addresses
> + */
> +};
> +
> +/* Access Extended Register Set (indicator) */
> +#define ACCESS_EXT_REGS_OFFSET 0x2f /* read-write */
> +/* Vendor-specific */
> +#define VENDOR_SPEC_OFFSET 0x30
> +
> +/*
> + * Extended Register Set
> + *
> + * Addresses 0x00-0x3F map directly to Immediate Register Set.
> + * Addresses 0x40-0x7F are reserved.
> + * Addresses 0x80-0xff are vendor-specific.
> + */
> +#define EXT_VENDOR_SPEC_OFFSET 0x80
> +
> +/*
> + * Register Bits
> + */
> +
> +/* Function Control */
> +#define ULPI_FC_XCVRSEL (1 << 0)
> +#define ULPI_FC_XCVRSEL_MASK (3 << 0)
> +#define ULPI_FC_HIGH_SPEED (0 << 0)
> +#define ULPI_FC_FULL_SPEED (1 << 0)
> +#define ULPI_FC_LOW_SPEED (2 << 0)
> +#define ULPI_FC_FS4LS (3 << 0)
> +#define ULPI_FC_TERMSELECT (1 << 2)
> +#define ULPI_FC_OPMODE (1 << 3)
> +#define ULPI_FC_OPMODE_MASK (3 << 3)
> +#define ULPI_FC_OPMODE_NORMAL (0 << 3)
> +#define ULPI_FC_OPMODE_NONDRIVING (1 << 3)
> +#define ULPI_FC_OPMODE_DISABLE_NRZI (2 << 3)
> +#define ULPI_FC_OPMODE_NOSYNC_NOEOP (3 << 3)
> +#define ULPI_FC_RESET (1 << 5)
> +#define ULPI_FC_SUSPENDM (1 << 6)
> +
> +/* Interface Control */
> +#define ULPI_IFACE_6_PIN_SERIAL_MODE (1 << 0)
> +#define ULPI_IFACE_3_PIN_SERIAL_MODE (1 << 1)
> +#define ULPI_IFACE_CARKITMODE (1 << 2)
> +#define ULPI_IFACE_CLOCKSUSPENDM (1 << 3)
> +#define ULPI_IFACE_AUTORESUME (1 << 4)
> +#define ULPI_IFACE_EXTVBUS_COMPLEMENT (1 << 5)
> +#define ULPI_IFACE_PASSTHRU (1 << 6)
> +#define ULPI_IFACE_PROTECT_IFC_DISABLE (1 << 7)
> +
> +/* OTG Control */
> +#define ULPI_OTG_ID_PULLUP (1 << 0)
> +#define ULPI_OTG_DP_PULLDOWN (1 << 1)
> +#define ULPI_OTG_DM_PULLDOWN (1 << 2)
> +#define ULPI_OTG_DISCHRGVBUS (1 << 3)
> +#define ULPI_OTG_CHRGVBUS (1 << 4)
> +#define ULPI_OTG_DRVVBUS (1 << 5)
> +#define ULPI_OTG_DRVVBUS_EXT (1 << 6)
> +#define ULPI_OTG_EXTVBUSIND (1 << 7)
> +
> +/*
> + * USB Interrupt Enable Rising,
> + * USB Interrupt Enable Falling,
> + * USB Interrupt Status and
> + * USB Interrupt Latch
> + */
> +#define ULPI_INT_HOST_DISCONNECT (1 << 0)
> +#define ULPI_INT_VBUS_VALID (1 << 1)
> +#define ULPI_INT_SESS_VALID (1 << 2)
> +#define ULPI_INT_SESS_END (1 << 3)
> +#define ULPI_INT_IDGRD (1 << 4)
> +
> +/* Debug */
> +#define ULPI_DEBUG_LINESTATE0 (1 << 0)
> +#define ULPI_DEBUG_LINESTATE1 (1 << 1)
> +
> +/* Carkit Control */
> +#define ULPI_CARKIT_CTRL_CARKITPWR (1 << 0)
> +#define ULPI_CARKIT_CTRL_IDGNDDRV (1 << 1)
> +#define ULPI_CARKIT_CTRL_TXDEN (1 << 2)
> +#define ULPI_CARKIT_CTRL_RXDEN (1 << 3)
> +#define ULPI_CARKIT_CTRL_SPKLEFTEN (1 << 4)
> +#define ULPI_CARKIT_CTRL_SPKRIGHTEN (1 << 5)
> +#define ULPI_CARKIT_CTRL_MICEN (1 << 6)
> +
> +/* Carkit Interrupt Enable */
> +#define ULPI_CARKIT_INT_EN_IDFLOAT_RISE (1 << 0)
> +#define ULPI_CARKIT_INT_EN_IDFLOAT_FALL (1 << 1)
> +#define ULPI_CARKIT_INT_EN_CARINTDET (1 << 2)
> +#define ULPI_CARKIT_INT_EN_DP_RISE (1 << 3)
> +#define ULPI_CARKIT_INT_EN_DP_FALL (1 << 4)
> +
> +/*
> + * Carkit Interrupt Status and
> + * Carkit Interrupt Latch
> + */
> +#define ULPI_CARKIT_INT_IDFLOAT (1 << 0)
> +#define ULPI_CARKIT_INT_CARINTDET (1 << 1)
> +#define ULPI_CARKIT_INT_DP (1 << 2)
> +
> +/* Carkit Pulse Control*/
> +#define ULPI_CARKIT_PLS_CTRL_TXPLSEN (1 << 0)
> +#define ULPI_CARKIT_PLS_CTRL_RXPLSEN (1 << 1)
> +#define ULPI_CARKIT_PLS_CTRL_SPKRLEFT_BIASEN (1 << 2)
> +#define ULPI_CARKIT_PLS_CTRL_SPKRRIGHT_BIASEN (1 << 3)
> +
> +void ulpi_write(u32 ulpi_viewport, u32 reg, u32 value);
> +u32 ulpi_read(u32 ulpi_viewport, u32 reg);
> +
> +void ulpi_init(u32 ulpi_viewport);
> +
> +void ulpi_select_transceiver(u32 ulpi_viewport, int speed);
> +void ulpi_drive_vbus(u32 ulpi_viewport,
> + int ext_power_supply, int use_ext_indicator);
> +void ulpi_dp_pulldown(u32 ulpi_viewport, int enable);
> +void ulpi_dm_pulldown(u32 ulpi_viewport, int enable);
> +void ulpi_select_opmode(u32 ulpi_viewport, int style);
> +void ulpi_suspend(u32 ulpi_viewport);
> +void ulpi_resume(u32 ulpi_viewport);
> +void ulpi_reset(u32 ulpi_viewport);
> +void ulpi_charge_vbus(u32 ulpi_viewport);
> +#endif /* __USB_ULPI_H */
Overall, the API is useful, the patch looks good and almost ready
for submission.
Please, make those final changes and we're done.
Thanks for doing this.
--
Regards,
Igor.
More information about the U-Boot
mailing list