[U-Boot] [PATCH] Blackfin: br4: new board port
Mike Frysinger
vapier at gentoo.org
Fri Nov 25 22:14:46 CET 2011
i tweaked a few things (like disabling the CONFIG_ETHADDR). same question for
this board ... where is the MAC normally stored ?
updated patch is below
-mike
From 6ff79ef55cb414b0dfb08b8aa9db2baf8849545b Mon Sep 17 00:00:00 2001
From: Dimitar Penev <dpn at switchfin.org>
Date: Fri, 25 Nov 2011 16:05:54 -0500
Subject: [PATCH] Blackfin: br4: new board port
This adds support for the BR4 Appliance. It is a quad channel ISDN BRI
board based on Blackfin BF537 CPU.
Signed-off-by: Dimitar Penev <dpn at switchfin.org>
Signed-off-by: Mike Frysinger <vapier at gentoo.org>
---
MAINTAINERS | 1 +
board/br4/Makefile | 50 +++++++++++++++
board/br4/br4.c | 30 +++++++++
board/br4/config.mk | 30 +++++++++
boards.cfg | 1 +
include/configs/br4.h | 160 +++++++++++++++++++++++++++++++++++++++++++++++++
6 files changed, 272 insertions(+), 0 deletions(-)
create mode 100644 board/br4/Makefile
create mode 100644 board/br4/br4.c
create mode 100644 board/br4/config.mk
create mode 100644 include/configs/br4.h
diff --git a/MAINTAINERS b/MAINTAINERS
index 0c7e15a..5932b67 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1136,6 +1136,7 @@ Chong Huang <chuang at ucrobotics.com>
Dimitar Penev <dpn at switchfin.org>
+ BR4 Appliance BF537
PR1 Appliance BF537
#########################################################################
diff --git a/board/br4/Makefile b/board/br4/Makefile
new file mode 100644
index 0000000..6ae998f
--- /dev/null
+++ b/board/br4/Makefile
@@ -0,0 +1,50 @@
+#
+# U-boot - Makefile
+#
+# Copyright (c) Switchfin Org. <dpn at switchfin.org>
+#
+# Copyright (c) 2005-2007 Analog Device Inc.
+#
+# (C) Copyright 2000-2006
+# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(BOARD).o
+
+COBJS-y := $(BOARD).o
+
+SRCS := $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS-y))
+SOBJS := $(addprefix $(obj),$(SOBJS-y))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
+ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/br4/br4.c b/board/br4/br4.c
new file mode 100644
index 0000000..bc034e3
--- /dev/null
+++ b/board/br4/br4.c
@@ -0,0 +1,30 @@
+/*
+ * U-boot - main board file
+ *
+ * Copyright (c) Switchfin Org. <dpn at switchfin.org>
+ *
+ * Copyright (c) 2005-2008 Analog Devices Inc.
+ *
+ * (C) Copyright 2000-2004
+ * Wolfgang Denk, DENX Software Engineering, wd at denx.de.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <common.h>
+#include <net.h>
+#include <netdev.h>
+
+int checkboard(void)
+{
+ printf("Board: Switchvoice BR4 Appliance\n");
+ printf(" Support: http://www.switchvoice.com/\n");
+ return 0;
+}
+
+#ifdef CONFIG_BFIN_MAC
+int board_eth_init(bd_t *bis)
+{
+ return bfin_EMAC_initialize(bis);
+}
+#endif
diff --git a/board/br4/config.mk b/board/br4/config.mk
new file mode 100644
index 0000000..9d66d26
--- /dev/null
+++ b/board/br4/config.mk
@@ -0,0 +1,30 @@
+#
+# Copyright (c) Switchfin Org. <dpn at switchfin.org>
+#
+# Copyright (c) 2005-2008 Analog Device Inc.
+#
+# (C) Copyright 2001
+# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+CFLAGS_lib += -O2
+CFLAGS_lib/lzma += -O2
+CFLAGS_lib/zlib += -O2
diff --git a/boards.cfg b/boards.cfg
index 420d7eb..a3b3814 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -261,6 +261,7 @@ bf561-acvilon blackfin blackfin
bf561-ezkit blackfin blackfin
blackstamp blackfin blackfin
blackvme blackfin blackfin
+br4 blackfin blackfin
cm-bf527 blackfin blackfin
cm-bf533 blackfin blackfin
cm-bf537e blackfin blackfin
diff --git a/include/configs/br4.h b/include/configs/br4.h
new file mode 100644
index 0000000..88ae616
--- /dev/null
+++ b/include/configs/br4.h
@@ -0,0 +1,160 @@
+/*
+ * U-boot - Configuration file for BR4 Appliance
+ *
+ * based on bf537-stamp.h
+ * Copyright (c) Switchfin Org. <dpn at switchfin.org>
+ */
+
+#ifndef __CONFIG_BR4_H__
+#define __CONFIG_BR4_H__
+
+#include <asm/config-pre.h>
+
+
+/*
+ * Processor Settings
+ */
+#define CONFIG_BFIN_CPU bf537-0.3
+#define CONFIG_BFIN_BOOT_MODE BFIN_BOOT_SPI_MASTER
+
+
+/*
+ * Clock Settings
+ * CCLK = (CLKIN * VCO_MULT) / CCLK_DIV
+ * SCLK = (CLKIN * VCO_MULT) / SCLK_DIV
+ */
+/* CONFIG_CLKIN_HZ is any value in Hz */
+#define CONFIG_CLKIN_HZ 25000000
+/* CLKIN_HALF controls the DF bit in PLL_CTL 0 = CLKIN */
+/* 1 = CLKIN / 2 */
+#define CONFIG_CLKIN_HALF 0
+/* PLL_BYPASS controls the BYPASS bit in PLL_CTL 0 = do not bypass */
+/* 1 = bypass PLL */
+#define CONFIG_PLL_BYPASS 0
+/* VCO_MULT controls the MSEL (multiplier) bits in PLL_CTL */
+/* Values can range from 0-63 (where 0 means 64) */
+#define CONFIG_VCO_MULT 24
+/* CCLK_DIV controls the core clock divider */
+/* Values can be 1, 2, 4, or 8 ONLY */
+#define CONFIG_CCLK_DIV 1
+/* SCLK_DIV controls the system clock divider */
+/* Values can range from 1-15 */
+#define CONFIG_SCLK_DIV 5
+
+
+/*
+ * Memory Settings
+ */
+#define CONFIG_MEM_ADD_WDTH 10
+#define CONFIG_MEM_SIZE 64
+
+#define CONFIG_EBIU_SDRRC_VAL 0x306
+#define CONFIG_EBIU_SDGCTL_VAL 0x8091998d
+
+#define CONFIG_EBIU_AMGCTL_VAL 0xFF
+#define CONFIG_EBIU_AMBCTL0_VAL 0x7BB07BB0
+#define CONFIG_EBIU_AMBCTL1_VAL 0xFFC27BB0
+
+#define CONFIG_SYS_MONITOR_LEN (512 * 1024)
+#define CONFIG_SYS_MALLOC_LEN (384 * 1024)
+
+
+/*
+ * Network Settings
+ */
+#ifndef __ADSPBF534__
+#define ADI_CMDS_NETWORK 1
+#define CONFIG_BFIN_MAC
+#define CONFIG_NETCONSOLE 1
+#endif
+#define CONFIG_HOSTNAME br4
+#define CONFIG_IPADDR 192.168.1.100
+#define CONFIG_GATEWAYIP 192.168.1.1
+#define CONFIG_SERVERIP 192.168.1.2
+#define CONFIG_TFTP_BLOCKSIZE 4404
+/* Uncomment next line to use fixed MAC address */
+/* #define CONFIG_ETHADDR 5c:38:1a:80:a7:00 */
+
+
+/*
+ * Flash Settings
+ */
+#define CONFIG_SYS_NO_FLASH /* We have no parallel FLASH */
+
+
+/*
+ * SPI Settings
+ */
+#define CONFIG_BFIN_SPI
+#define CONFIG_ENV_SPI_MAX_HZ 30000000
+#define CONFIG_SF_DEFAULT_SPEED 30000000
+#define CONFIG_SPI_FLASH
+#define CONFIG_SPI_FLASH_STMICRO
+
+
+/*
+ * Env Storage Settings
+ */
+#define CONFIG_ENV_IS_IN_SPI_FLASH
+#define CONFIG_ENV_OFFSET 0x10000
+#define CONFIG_ENV_SIZE 0x2000
+#define CONFIG_ENV_SECT_SIZE 0x10000
+#define CONFIG_ENV_IS_EMBEDDED_IN_LDR
+
+
+/*
+ * I2C Settings
+ */
+#define CONFIG_BFIN_TWI_I2C 1
+#define CONFIG_HARD_I2C 1
+
+
+/*
+ * NAND Settings
+ */
+#define CONFIG_NAND_PLAT
+#define CONFIG_SYS_NAND_BASE 0x20000000
+#define CONFIG_SYS_MAX_NAND_DEVICE 1
+
+#define BFIN_NAND_CLE(chip) ((unsigned long)(chip)->IO_ADDR_W | (1 << 2))
+#define BFIN_NAND_ALE(chip) ((unsigned long)(chip)->IO_ADDR_W | (1 << 1))
+#define BFIN_NAND_WRITE(addr, cmd) \
+ do { \
+ bfin_write8(addr, cmd); \
+ SSYNC(); \
+ } while (0)
+
+#define NAND_PLAT_WRITE_CMD(chip, cmd) BFIN_NAND_WRITE(BFIN_NAND_CLE(chip), cmd)
+#define NAND_PLAT_WRITE_ADR(chip, cmd) BFIN_NAND_WRITE(BFIN_NAND_ALE(chip), cmd)
+#define NAND_PLAT_GPIO_DEV_READY GPIO_PF9
+
+/*
+ * Misc Settings
+ */
+#define CONFIG_BAUDRATE 115200
+#define CONFIG_RTC_BFIN
+#define CONFIG_UART_CONSOLE 0
+#define CONFIG_SYS_PROMPT "br4>"
+#define CONFIG_BOOTCOMMAND "run nandboot"
+#define CONFIG_BOOTDELAY 2
+#define CONFIG_LOADADDR 0x2000000
+
+
+/*
+ * Pull in common ADI header for remaining command/environment setup
+ */
+#include <configs/bfin_adi_common.h>
+
+/*
+ * Overwrite some settings defined in bfin_adi_common.h
+ */
+#undef NAND_ENV_SETTINGS
+#define NAND_ENV_SETTINGS \
+ "nandargs=set bootargs " CONFIG_BOOTARGS "\0" \
+ "nandboot=" \
+ "nand read $(loadaddr) 0x0 0x900000;" \
+ "run nandargs;" \
+ "bootm" \
+ "\0"
+
+#endif
--
1.7.6.1
More information about the U-Boot
mailing list