[U-Boot] [PATCH v5] ulpi: add generic ULPI functionality
Jana Rapava
fermata7 at gmail.com
Mon Nov 28 01:19:05 CET 2011
Add generic functions for reading, writing and setting bits in ULPI registers.
Signed-off-by: Jana Rapava <fermata7 at gmail.com>
Cc: Remy Bohmer <linux at bohmer.net>
Cc: Stefano Babic <sbabic at denx.de>
Cc: Igor Grinberg <grinberg at compulab.co.il>
Cc: Wolfgang Grandegger <wg at denx.de>
Cc: Simon Glass <sjg at chromium.org>
---
Changes for v2:
- make code EHCI-independent
- use udelay() in waiting loop
- mark static functions as static
- naming changes
Changes for v3:
- merge with patch ulpi: add generic ULPI support header file
- rewrite ULPI interface in more functionality-oriented way
Changes for v4:
- add error-checking
- add waiting for completion into ulpi_reset() function
Changes for v5:
- CodingStyle changes
- add comments
- simplify implemenation of the ULPI interface functions
Makefile | 1 +
drivers/usb/ulpi/Makefile | 45 +++++++
drivers/usb/ulpi/ulpi-viewport.c | 114 ++++++++++++++++++
drivers/usb/ulpi/ulpi.c | 158 +++++++++++++++++++++++++
include/usb/ulpi.h | 238 ++++++++++++++++++++++++++++++++++++++
5 files changed, 556 insertions(+), 0 deletions(-)
create mode 100644 drivers/usb/ulpi/Makefile
create mode 100644 drivers/usb/ulpi/ulpi-viewport.c
create mode 100644 drivers/usb/ulpi/ulpi.c
create mode 100644 include/usb/ulpi.h
diff --git a/Makefile b/Makefile
index dfe939f..70a1e1e 100644
--- a/Makefile
+++ b/Makefile
@@ -272,6 +272,7 @@ LIBS += drivers/usb/gadget/libusb_gadget.o
LIBS += drivers/usb/host/libusb_host.o
LIBS += drivers/usb/musb/libusb_musb.o
LIBS += drivers/usb/phy/libusb_phy.o
+LIBS += drivers/usb/ulpi/libusb_ulpi.o
LIBS += drivers/video/libvideo.o
LIBS += drivers/watchdog/libwatchdog.o
LIBS += common/libcommon.o
diff --git a/drivers/usb/ulpi/Makefile b/drivers/usb/ulpi/Makefile
new file mode 100644
index 0000000..a1a2244
--- /dev/null
+++ b/drivers/usb/ulpi/Makefile
@@ -0,0 +1,45 @@
+#
+# Copyright (C) 2011 Jana Rapava <fermata7 at gmail.com>
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB := $(obj)libusb_ulpi.o
+
+COBJS-$(CONFIG_USB_ULPI) += ulpi.o
+COBJS-$(CONFIG_USB_ULPI_VIEWPORT) += ulpi-viewport.o
+
+COBJS := $(COBJS-y)
+SRCS := $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+
+all: $(LIB)
+
+$(LIB): $(obj).depend $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/drivers/usb/ulpi/ulpi-viewport.c b/drivers/usb/ulpi/ulpi-viewport.c
new file mode 100644
index 0000000..7764939
--- /dev/null
+++ b/drivers/usb/ulpi/ulpi-viewport.c
@@ -0,0 +1,114 @@
+/*
+ * Copyright (C) 2011 Jana Rapava <fermata7 at gmail.com>
+ * Based on:
+ * linux/drivers/usb/otg/ulpi_viewport.c
+ *
+ * Original Copyright follow:
+ * Copyright (C) 2011 Google, Inc.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <usb/ulpi.h>
+
+/* ULPI viewport control bits */
+#define ULPI_WU (1 << 31)
+#define ULPI_SS (1 << 27)
+#define ULPI_RWRUN (1 << 30)
+#define ULPI_RWCTRL (1 << 29)
+
+#define ULPI_ADDR_SHIFT 16
+#define ulpi_write_mask(value) ((value) & 0xff)
+#define ulpi_read_mask(value) (((value) >> 8) & 0xff)
+
+/* This function issues ULPI wakeup/read-write request
+ * and waits until ULPI interface signalizes completion.
+ * 'ulpi_value' is properly constructed ULPI request,
+ * 'ulpi_mask' is ULPI_WU for wakeup, ULPI_RWRUN for read or write.
+ */
+static int ulpi_request(u32 ulpi_viewport, u32 ulpi_value, u32 ulpi_mask)
+{
+ int timeout = CONFIG_USB_ULPI_TIMEOUT;
+ u32 tmp;
+
+ writel(ulpi_value, ulpi_viewport);
+
+ /* Wait for the bits in ulpi_mask to become zero. */
+ while (--timeout) {
+ tmp = readl(ulpi_viewport);
+ if (!(tmp & ulpi_mask))
+ return 0;
+ udelay(1);
+ }
+
+ return ULPI_ERROR;
+}
+
+/* If ULPI bus isn't already awake, issue wakeup request via ulpi_request(). */
+static int ulpi_wakeup(u32 ulpi_viewport)
+{
+ if (readl(ulpi_viewport) & ULPI_SS)
+ return 0; /* already awake */
+
+ return ulpi_request(ulpi_viewport, ULPI_WU, ULPI_WU);
+}
+
+/*
+ * Wakeup ULPI interface and, if successful, create and issue
+ * ULPI write request via ulpi_request().
+ * 'reg' is pointer to member of structure ulpi_regs
+ * 'value' is value to be written.
+ */
+u32 ulpi_write(u32 ulpi_viewport, u8 *reg, u32 value)
+{
+ u32 tmp;
+
+ if (ulpi_wakeup(ulpi_viewport)) {
+ printf("ULPI wakeup timed out\n");
+ return ULPI_ERROR;
+ }
+
+ tmp = ulpi_request(ulpi_viewport, ULPI_RWRUN | ULPI_RWCTRL |
+ (u32)reg << ULPI_ADDR_SHIFT | ulpi_write_mask(value),
+ ULPI_RWRUN);
+ if (tmp)
+ printf("ULPI write timed out\n");
+
+ return tmp;
+}
+
+/*
+ * Wakeup ULPI interface and, if successful, create and issue
+ * ULPI read request via ulpi_request().
+ * 'reg' is pointer to member of structure ulpi_regs.
+ * Return value is value which was read, or ULPI_ERROR if wakeup or read
+ * request timed out.
+ */
+u32 ulpi_read(u32 ulpi_viewport, u8 *reg)
+{
+ u32 tmp;
+
+ if (ulpi_wakeup(ulpi_viewport)) {
+ printf("ULPI wakeup timed out\n");
+ return ULPI_ERROR;
+ }
+
+ tmp = ulpi_request(ulpi_viewport, ULPI_RWRUN |
+ (u32)reg << ULPI_ADDR_SHIFT, ULPI_RWRUN);
+ if (tmp) {
+ printf("ULPI read timed out\n");
+ return tmp;
+ }
+
+ return ulpi_read_mask(readl(ulpi_viewport));
+}
diff --git a/drivers/usb/ulpi/ulpi.c b/drivers/usb/ulpi/ulpi.c
new file mode 100644
index 0000000..c4dc408
--- /dev/null
+++ b/drivers/usb/ulpi/ulpi.c
@@ -0,0 +1,158 @@
+/*
+ * Copyright (C) 2011 Jana Rapava <fermata7 at gmail.com>
+ * Based on:
+ * linux/drivers/usb/otg/ulpi.c
+ * Generic ULPI USB transceiver support
+ *
+ * Original Copyright follow:
+ * Copyright (C) 2009 Daniel Mack <daniel at caiaq.de>
+ *
+ * Based on sources from
+ *
+ * Sascha Hauer <s.hauer at pengutronix.de>
+ * Freescale Semiconductors
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <common.h>
+#include <exports.h>
+#include <usb/ulpi.h>
+
+static struct ulpi_regs *ulpi = (struct ulpi_regs *)0;
+
+static int ulpi_integrity_check(u32 ulpi_viewport)
+{
+ u32 tmp = 0;
+ int i;
+
+ /*
+ * Write at and read from 3 parts of the Scratch Register
+ * (8 bits each).
+ */
+ for (i = 0; i < 2; i++) {
+ ulpi_write(ulpi_viewport, &ulpi->scratch,
+ ULPI_TEST_VALUE << i);
+ tmp = ulpi_read(ulpi_viewport, &ulpi->scratch);
+
+ if (tmp != (ULPI_TEST_VALUE << i)) {
+ printf("ULPI integrity check failed\n");
+ return ULPI_ERROR;
+ }
+ }
+ return 0;
+}
+
+/* Identify ULPI transceiver, perform integrity check. */
+int ulpi_init(u32 ulpi_viewport)
+{
+ u32 tmp = 0;
+ int reg;
+
+ /* Assemble ID from four ULPI ID registers (8 bits each). */
+ for (reg = ULPI_ID_REGS_COUNT - 1; reg >= 0; reg--)
+ tmp |= ulpi_read(ulpi_viewport, (u8 *)reg) << (reg * 8);
+
+ /* Split ID into vendor and product ID. */
+ debug("Found ULPI transceiver ID %04x:%04x\n", tmp >> 16, tmp & 0xffff);
+
+ return ulpi_integrity_check(ulpi_viewport);
+}
+
+/*
+ * This function is used to select transceiver speed.
+ * Accepted 'speed' values are:
+ * ULPI_FC_HIGH_SPEED, ULPI_FC_FULL_SPEED, ULPI_FC_LOW_SPEED, ULPI_FC_FS4LS
+ * (FS transceiver for LS packets).
+ * Default value is ULPI_FC_FULL_SPEED.
+ */
+int ulpi_select_transceiver(u32 ulpi_viewport, int speed)
+{
+ return ulpi_write(ulpi_viewport, &ulpi->function_ctrl_set, speed);
+}
+
+/*
+ * Signals that 5V is driven to VBUS.
+ * 'ext_power_supply' is 1, if we use external supply instead of
+ * internal charge pump(which is default).
+ * 'use_ext_indicator' is 1, if we use external VBUS over-current indicator.
+ */
+int ulpi_drive_vbus(u32 ulpi_viewport,
+ int ext_power_supply, int use_ext_indicator)
+{
+ int flags = ULPI_OTG_DRVVBUS |
+ (ext_power_supply) ? ULPI_OTG_DRVVBUS_EXT : 0 |
+ (use_ext_indicator) ? ULPI_OTG_EXTVBUSIND : 0;
+
+ return ulpi_write(ulpi_viewport, &ulpi->otg_ctrl_set, flags);
+}
+
+/*
+ * If enable is 0, pull-down resistors not connected to D+ and D-,
+ * else pull-down resistors connected to D+ and D-.
+ * Default behaviour is as for enable equal to 1.
+ */
+int ulpi_pulldown(u32 ulpi_viewport, int enable)
+{
+ u8 *reg = (enable) ? &ulpi->otg_ctrl_set
+ : &ulpi->otg_ctrl_clear;
+
+ return ulpi_write(ulpi_viewport, reg,
+ ULPI_OTG_DP_PULLDOWN | ULPI_OTG_DM_PULLDOWN);
+}
+
+/*
+ * This function is used to select bit encoding style.
+ * Accepted 'opmode' values are:
+ * ULPI_FC_OPMODE_NORMAL, ULPI_FC_OPMODE_NONDRIVING,
+ * ULPI_FC_OPMODE_DISABLE_NRZI, ULPI_FC_OPMODE_NOSYNC_NOEOP.
+ * Default value is ULPI_FC_OPMODE_NORMAL.
+ */
+int ulpi_select_opmode(u32 ulpi_viewport, int opmode)
+{
+ return ulpi_write(ulpi_viewport, &ulpi->function_ctrl_set, opmode);
+}
+
+/* Put PHY into low power mode. */
+int ulpi_suspend(u32 ulpi_viewport)
+{
+ return ulpi_write(ulpi_viewport, &ulpi->function_ctrl_clear,
+ ULPI_FC_SUSPENDM);
+}
+
+/* Put PHY out of low power mode. */
+int ulpi_resume(u32 ulpi_viewport)
+{
+ return ulpi_write(ulpi_viewport, &ulpi->function_ctrl_set,
+ ULPI_FC_SUSPENDM);
+}
+
+/* Reset transceiver, does not reset ULPI interface or ULPI register set. */
+int ulpi_reset(u32 ulpi_viewport)
+{
+ int timeout = CONFIG_USB_ULPI_TIMEOUT;
+ u32 tmp;
+ int ret = ulpi_write(ulpi_viewport, &ulpi->function_ctrl_set,
+ ULPI_FC_RESET);
+
+ if (ret)
+ return ret;
+
+ /* Wait for the RESET bit to become zero. */
+ while (--timeout) {
+ tmp = ulpi_read(ulpi_viewport, &ulpi->function_ctrl);
+ if (!(tmp & ULPI_FC_RESET))
+ return 0;
+ udelay(1);
+ }
+
+ return ULPI_ERROR;
+}
diff --git a/include/usb/ulpi.h b/include/usb/ulpi.h
new file mode 100644
index 0000000..d7b37a6
--- /dev/null
+++ b/include/usb/ulpi.h
@@ -0,0 +1,238 @@
+/*
+ * Copyright (C) 2011 Jana Rapava <fermata7 at gmail.com>
+ * Based on:
+ * linux/include/linux/usb/ulpi.h
+ * ULPI defines and function prototypes
+ *
+ * Original Copyrights follow:
+ * Copyright (C) 2010 Nokia Corporation
+ *
+ * This software is distributed under the terms of the GNU General
+ * Public License ("GPL") as published by the Free Software Foundation,
+ * version 2 of that License.
+ */
+
+#ifndef __USB_ULPI_H
+#define __USB_ULPI_H
+
+#define ULPI_ID_REGS_COUNT 4
+#define ULPI_TEST_VALUE 0x55
+/* value greater than 0xff indicates failure */
+#define ULPI_ERROR (1 << 8)
+
+/* ULPI viewport control bits */
+#define ULPI_WU (1 << 31)
+#define ULPI_SS (1 << 27)
+#define ULPI_RWRUN (1 << 30)
+#define ULPI_RWCTRL (1 << 29)
+
+/* ULPI access modes */
+#define ULPI_WRITE 0x00
+#define ULPI_SET 0x01
+#define ULPI_CLEAR 0x02
+
+struct ulpi_regs {
+ /* Vendor ID and Product ID: 0x00 - 0x03 Read-only */
+ u8 vendor_id_low;
+ u8 vendor_id_high;
+ u8 product_id_low;
+ u8 product_id_high;
+ /* Function Control: 0x04 - 0x06 Read */
+ u8 function_ctrl; /* 0x04 Write */
+ u8 function_ctrl_set; /* 0x05 Set */
+ u8 function_ctrl_clear; /* 0x06 Clear */
+ /* Interface Control: 0x07 - 0x09 Read */
+ u8 iface_ctrl; /* 0x07 Write */
+ u8 iface_ctrl_set; /* 0x08 Set */
+ u8 iface_ctrl_clear; /* 0x09 Clear */
+ /* OTG Control: 0x0A - 0x0C Read */
+ u8 otg_ctrl; /* 0x0A Write */
+ u8 otg_ctrl_set; /* 0x0B Set */
+ u8 otg_ctrl_clear; /* 0x0C Clear */
+ /* USB Interrupt Enable Rising: 0x0D - 0x0F Read */
+ u8 usb_ie_rising; /* 0x0D Write */
+ u8 usb_ie_rising_set; /* 0x0E Set */
+ u8 usb_ie_rising_clear; /* 0x0F Clear */
+ /* USB Interrupt Enable Falling: 0x10 - 0x12 Read */
+ u8 usb_ie_falling; /* 0x10 Write */
+ u8 usb_ie_falling_set; /* 0x11 Set */
+ u8 usb_ie_falling_clear; /* 0x12 Clear */
+ /* USB Interrupt Status: 0x13 Read-only */
+ u8 usb_int_status;
+ /* USB Interrupt Latch: 0x14 Read-only with auto-clear */
+ u8 usb_int_latch;
+ /* Debug: 0x15 Read-only */
+ u8 debug;
+ /* Scratch Register: 0x16 - 0x18 Read */
+ u8 scratch; /* 0x16 Write */
+ u8 scratch_set; /* 0x17 Set */
+ u8 scratch_clear; /* 0x18 Clear */
+ /*
+ * Optional Carkit registers
+ */
+ /* Carkit Control: 0x19 - 0x1B Read */
+ u8 carkit_ctrl; /* 0x19 Write */
+ u8 carkit_ctrl_set; /* 0x1A Set */
+ u8 carkit_ctrl_clear; /* 0x1B Clear */
+ /* Carkit Interrupt Delay: 0x1C Read, Write */
+ u8 carkit_int_delay;
+ /* Carkit Interrupt Enable: 0x1D - 0x1F Read */
+ u8 carkit_ie; /* 0x1D Write */
+ u8 carkit_ie_set; /* 0x1E Set */
+ u8 carkit_ie_clear; /* 0x1F Clear */
+ /* Carkit Interrupt Status: 0x20 Read-only */
+ u8 carkit_int_status;
+ /* Carkit Interrupt Latch: 0x21 Read-only with auto-clear */
+ u8 carkit_int_latch;
+ /* Carkit Pulse Control: 0x22 - 0x24 Read */
+ u8 carkit_pulse_ctrl; /* 0x22 Write */
+ u8 carkit_pulse_ctrl_set; /* 0x23 Set */
+ u8 carkit_pulse_ctrl_clear; /* 0x24 Clear */
+ /*
+ * Other optional registers
+ */
+ /* Transmit Positive Width: 0x25 Read, Write */
+ u8 transmit_pos_width;
+ /* Transmit Negative Width: 0x26 Read, Write */
+ u8 transmit_neg_width;
+ /* Receive Polarity Recovery: 0x27 Read, Write */
+ u8 recv_pol_recovery;
+ /*
+ * Addresses 0x28 - 0x2E are reserved, so we use offsets
+ * for immediate registers with higher addresses
+ */
+};
+
+/* Access Extended Register Set (indicator) */
+#define ACCESS_EXT_REGS_OFFSET 0x2f /* read-write */
+/* Vendor-specific */
+#define VENDOR_SPEC_OFFSET 0x30
+
+/*
+ * Extended Register Set
+ *
+ * Addresses 0x00-0x3F map directly to Immediate Register Set.
+ * Addresses 0x40-0x7F are reserved.
+ * Addresses 0x80-0xff are vendor-specific.
+ */
+#define EXT_VENDOR_SPEC_OFFSET 0x80
+
+/*
+ * Register Bits
+ */
+
+/* Function Control */
+#define ULPI_FC_XCVRSEL (1 << 0)
+#define ULPI_FC_XCVRSEL_MASK (3 << 0)
+#define ULPI_FC_HIGH_SPEED (0 << 0)
+#define ULPI_FC_FULL_SPEED (1 << 0)
+#define ULPI_FC_LOW_SPEED (2 << 0)
+#define ULPI_FC_FS4LS (3 << 0)
+#define ULPI_FC_TERMSELECT (1 << 2)
+#define ULPI_FC_OPMODE (1 << 3)
+#define ULPI_FC_OPMODE_MASK (3 << 3)
+#define ULPI_FC_OPMODE_NORMAL (0 << 3)
+#define ULPI_FC_OPMODE_NONDRIVING (1 << 3)
+#define ULPI_FC_OPMODE_DISABLE_NRZI (2 << 3)
+#define ULPI_FC_OPMODE_NOSYNC_NOEOP (3 << 3)
+#define ULPI_FC_RESET (1 << 5)
+#define ULPI_FC_SUSPENDM (1 << 6)
+
+/* Interface Control */
+#define ULPI_IFACE_6_PIN_SERIAL_MODE (1 << 0)
+#define ULPI_IFACE_3_PIN_SERIAL_MODE (1 << 1)
+#define ULPI_IFACE_CARKITMODE (1 << 2)
+#define ULPI_IFACE_CLOCKSUSPENDM (1 << 3)
+#define ULPI_IFACE_AUTORESUME (1 << 4)
+#define ULPI_IFACE_EXTVBUS_COMPLEMENT (1 << 5)
+#define ULPI_IFACE_PASSTHRU (1 << 6)
+#define ULPI_IFACE_PROTECT_IFC_DISABLE (1 << 7)
+
+/* OTG Control */
+#define ULPI_OTG_ID_PULLUP (1 << 0)
+#define ULPI_OTG_DP_PULLDOWN (1 << 1)
+#define ULPI_OTG_DM_PULLDOWN (1 << 2)
+#define ULPI_OTG_DISCHRGVBUS (1 << 3)
+#define ULPI_OTG_CHRGVBUS (1 << 4)
+#define ULPI_OTG_DRVVBUS (1 << 5)
+#define ULPI_OTG_DRVVBUS_EXT (1 << 6)
+#define ULPI_OTG_EXTVBUSIND (1 << 7)
+
+/*
+ * USB Interrupt Enable Rising,
+ * USB Interrupt Enable Falling,
+ * USB Interrupt Status and
+ * USB Interrupt Latch
+ */
+#define ULPI_INT_HOST_DISCONNECT (1 << 0)
+#define ULPI_INT_VBUS_VALID (1 << 1)
+#define ULPI_INT_SESS_VALID (1 << 2)
+#define ULPI_INT_SESS_END (1 << 3)
+#define ULPI_INT_IDGRD (1 << 4)
+
+/* Debug */
+#define ULPI_DEBUG_LINESTATE0 (1 << 0)
+#define ULPI_DEBUG_LINESTATE1 (1 << 1)
+
+/* Carkit Control */
+#define ULPI_CARKIT_CTRL_CARKITPWR (1 << 0)
+#define ULPI_CARKIT_CTRL_IDGNDDRV (1 << 1)
+#define ULPI_CARKIT_CTRL_TXDEN (1 << 2)
+#define ULPI_CARKIT_CTRL_RXDEN (1 << 3)
+#define ULPI_CARKIT_CTRL_SPKLEFTEN (1 << 4)
+#define ULPI_CARKIT_CTRL_SPKRIGHTEN (1 << 5)
+#define ULPI_CARKIT_CTRL_MICEN (1 << 6)
+
+/* Carkit Interrupt Enable */
+#define ULPI_CARKIT_INT_EN_IDFLOAT_RISE (1 << 0)
+#define ULPI_CARKIT_INT_EN_IDFLOAT_FALL (1 << 1)
+#define ULPI_CARKIT_INT_EN_CARINTDET (1 << 2)
+#define ULPI_CARKIT_INT_EN_DP_RISE (1 << 3)
+#define ULPI_CARKIT_INT_EN_DP_FALL (1 << 4)
+
+/*
+ * Carkit Interrupt Status and
+ * Carkit Interrupt Latch
+ */
+#define ULPI_CARKIT_INT_IDFLOAT (1 << 0)
+#define ULPI_CARKIT_INT_CARINTDET (1 << 1)
+#define ULPI_CARKIT_INT_DP (1 << 2)
+
+/* Carkit Pulse Control*/
+#define ULPI_CARKIT_PLS_CTRL_TXPLSEN (1 << 0)
+#define ULPI_CARKIT_PLS_CTRL_RXPLSEN (1 << 1)
+#define ULPI_CARKIT_PLS_CTRL_SPKRLEFT_BIASEN (1 << 2)
+#define ULPI_CARKIT_PLS_CTRL_SPKRRIGHT_BIASEN (1 << 3)
+
+/*
+ * This is the generic ULPI interface.
+ * All functions with the exception of ulpi_read() return 0 in the case
+ * of success, ULPI_ERROR otherwise.
+ * 'ulpi_viewport' have to be address of ULPI Viewport register.
+ */
+/*
+ * This function should be called before every other function
+ * to check the ULPI registers.
+ */
+int ulpi_init(u32 ulpi_viewport);
+
+/*
+ * These are wrappers for functionalities, which could be enabled
+ * via ULPI registers.
+ */
+int ulpi_select_transceiver(u32 ulpi_viewport, int speed);
+int ulpi_drive_vbus(u32 ulpi_viewport,
+ int ext_power_supply, int use_ext_indicator);
+int ulpi_pulldown(u32 ulpi_viewport, int enable);
+int ulpi_select_opmode(u32 ulpi_viewport, int style);
+int ulpi_suspend(u32 ulpi_viewport);
+int ulpi_resume(u32 ulpi_viewport);
+int ulpi_reset(u32 ulpi_viewport);
+
+/*
+ * These are functions for direct reading from and writing to
+ * ULPI registers.
+ */
+u32 ulpi_write(u32 ulpi_viewport, u8 *reg, u32 value);
+u32 ulpi_read(u32 ulpi_viewport, u8 *reg);
+#endif /* __USB_ULPI_H */
--
1.7.6.3
More information about the U-Boot
mailing list