[U-Boot] [PATCH v2] mmc: add host_caps checking avoid switch card improperly
Macpaul Lin
macpaul at andestech.com
Mon Nov 28 09:24:21 CET 2011
Add a host capability checking to avoid the mmc stack
switch the card to HIGHSPEED mode when the card supports
HIGHSPEED while the host doesn't.
This patch avoid furthur transaction problem when the
mmc/sd card runs different mode to the host.
Signed-off-by: Macpaul Lin <macpaul at andestech.com>
---
Changes for v2:
- Replace OR logic by AND logic; switch to high speed if controller
support one of the high speed mode.
drivers/mmc/mmc.c | 10 ++++++++++
1 files changed, 10 insertions(+), 0 deletions(-)
diff --git a/drivers/mmc/mmc.c b/drivers/mmc/mmc.c
index 21665ec..98abf1c 100644
--- a/drivers/mmc/mmc.c
+++ b/drivers/mmc/mmc.c
@@ -785,6 +785,16 @@ retry_scr:
if (!(__be32_to_cpu(switch_status[3]) & SD_HIGHSPEED_SUPPORTED))
return 0;
+ /*
+ * If the host doesn't support SD_HIGHSPEED, do not switch card to
+ * HIGHSPEED mode even if the card support SD_HIGHSPPED.
+ * This can avoid furthur problem when the card runs in different
+ * mode between the host.
+ */
+ if (!((mmc->host_caps & MMC_MODE_HS_52MHz) &&
+ (mmc->host_caps & MMC_MODE_HS)))
+ return 0;
+
err = sd_switch(mmc, SD_SWITCH_SWITCH, 0, 1, (u8 *)switch_status);
if (err)
--
1.7.3.5
CONFIDENTIALITY NOTICE:
This e-mail (and its attachments) may contain confidential and legally
privileged information or information protected from disclosure. If you
are not the intended recipient, you are hereby notified that any
disclosure, copying, distribution, or use of the information contained
herein is strictly prohibited. In this case, please immediately notify the
sender by return e-mail, delete the message (and any accompanying
documents) and destroy all printed hard copies. Thank you for your
cooperation.
Copyright ANDES TECHNOLOGY CORPORATION - All Rights Reserved.
More information about the U-Boot
mailing list