[U-Boot] [PATCH 05/13] davinci_emac: fix for running with dcache enabled
Ilya Yanok
yanok at emcraft.com
Mon Nov 28 17:37:33 CET 2011
DaVinci EMAC is present on TI AM35xx SoCs (ARMv7) which run with D-Cache
enabled by default. So we have to take care and flush/invalidate the
cache before/after the DMA operations.
Please note that the receive buffer alignment to 32 byte boundary comes
from the old driver version I don't know if it is really needed or
alignment to cache line size is enough.
Signed-off-by: Ilya Yanok <yanok at emcraft.com>
---
drivers/net/davinci_emac.c | 41 +++++++++++++++++++++++++++++++++++++++--
drivers/net/davinci_emac.h | 5 +++--
2 files changed, 42 insertions(+), 4 deletions(-)
diff --git a/drivers/net/davinci_emac.c b/drivers/net/davinci_emac.c
index 4f9ed2f..4760390 100644
--- a/drivers/net/davinci_emac.c
+++ b/drivers/net/davinci_emac.c
@@ -41,6 +41,7 @@
#include <net.h>
#include <miiphy.h>
#include <malloc.h>
+#include <linux/compiler.h>
#include <asm/arch/emac_defs.h>
#include <asm/io.h>
#include "davinci_emac.h"
@@ -105,7 +106,8 @@ static volatile emac_desc *emac_rx_active_tail = 0;
static int emac_rx_queue_active = 0;
/* Receive packet buffers */
-static unsigned char emac_rx_buffers[EMAC_MAX_RX_BUFFERS * (EMAC_MAX_ETHERNET_PKT_SIZE + EMAC_PKT_ALIGN)];
+static unsigned char emac_rx_buffers[EMAC_MAX_RX_BUFFERS * EMAC_RXBUF_SIZE]
+ __aligned(ARCH_DMA_MINALIGN);
#ifndef CONFIG_SYS_DAVINCI_EMAC_PHY_COUNT
#define CONFIG_SYS_DAVINCI_EMAC_PHY_COUNT 3
@@ -119,6 +121,26 @@ static u_int8_t num_phy;
phy_t phy[CONFIG_SYS_DAVINCI_EMAC_PHY_COUNT];
+static inline void davinci_flush_rx_descs(void)
+{
+ /* flush the whole RX descs area */
+ flush_dcache_range(EMAC_WRAPPER_RAM_ADDR + EMAC_RX_DESC_BASE,
+ EMAC_WRAPPER_RAM_ADDR + EMAC_TX_DESC_BASE);
+}
+
+static inline void davinci_invalidate_rx_descs(void)
+{
+ /* invalidate the whole RX descs area */
+ invalidate_dcache_range(EMAC_WRAPPER_RAM_ADDR + EMAC_RX_DESC_BASE,
+ EMAC_WRAPPER_RAM_ADDR + EMAC_TX_DESC_BASE);
+}
+
+static inline void davinci_flush_desc(emac_desc *desc)
+{
+ flush_dcache_range((unsigned long)desc,
+ (unsigned long)desc + sizeof(*desc));
+}
+
static int davinci_eth_set_mac_addr(struct eth_device *dev)
{
unsigned long mac_hi;
@@ -470,7 +492,7 @@ static int davinci_eth_open(struct eth_device *dev, bd_t *bis)
emac_rx_active_head = emac_rx_desc;
for (cnt = 0; cnt < EMAC_MAX_RX_BUFFERS; cnt++) {
rx_desc->next = BD_TO_HW((u_int32_t)(rx_desc + 1));
- rx_desc->buffer = &emac_rx_buffers[cnt * (EMAC_MAX_ETHERNET_PKT_SIZE + EMAC_PKT_ALIGN)];
+ rx_desc->buffer = &emac_rx_buffers[cnt * EMAC_RXBUF_SIZE];
rx_desc->buff_off_len = EMAC_MAX_ETHERNET_PKT_SIZE;
rx_desc->pkt_flag_len = EMAC_CPPI_OWNERSHIP_BIT;
rx_desc++;
@@ -482,6 +504,8 @@ static int davinci_eth_open(struct eth_device *dev, bd_t *bis)
emac_rx_active_tail = rx_desc;
emac_rx_queue_active = 1;
+ davinci_flush_rx_descs();
+
/* Enable TX/RX */
writel(EMAC_MAX_ETHERNET_PKT_SIZE, &adap_emac->RXMAXLEN);
writel(0, &adap_emac->RXBUFFEROFFSET);
@@ -639,6 +663,11 @@ static int davinci_eth_send_packet (struct eth_device *dev,
EMAC_CPPI_SOP_BIT |
EMAC_CPPI_OWNERSHIP_BIT |
EMAC_CPPI_EOP_BIT);
+
+ flush_dcache_range((unsigned long)packet,
+ (unsigned long)packet + length);
+ davinci_flush_desc(emac_tx_desc);
+
/* Send the packet */
writel(BD_TO_HW((unsigned long)emac_tx_desc), &adap_emac->TX0HDP);
@@ -671,6 +700,8 @@ static int davinci_eth_rcv_packet (struct eth_device *dev)
volatile emac_desc *tail_desc;
int status, ret = -1;
+ davinci_invalidate_rx_descs();
+
rx_curr_desc = emac_rx_active_head;
status = rx_curr_desc->pkt_flag_len;
if ((rx_curr_desc) && ((status & EMAC_CPPI_OWNERSHIP_BIT) == 0)) {
@@ -678,6 +709,9 @@ static int davinci_eth_rcv_packet (struct eth_device *dev)
/* Error in packet - discard it and requeue desc */
printf ("WARN: emac_rcv_pkt: Error in packet\n");
} else {
+ unsigned long tmp = (unsigned long)rx_curr_desc->buffer;
+
+ invalidate_dcache_range(tmp, tmp + EMAC_RXBUF_SIZE);
NetReceive (rx_curr_desc->buffer,
(rx_curr_desc->buff_off_len & 0xffff));
ret = rx_curr_desc->buff_off_len & 0xffff;
@@ -703,6 +737,7 @@ static int davinci_eth_rcv_packet (struct eth_device *dev)
rx_curr_desc->buff_off_len = EMAC_MAX_ETHERNET_PKT_SIZE;
rx_curr_desc->pkt_flag_len = EMAC_CPPI_OWNERSHIP_BIT;
rx_curr_desc->next = 0;
+ davinci_flush_desc(rx_curr_desc);
if (emac_rx_active_head == 0) {
printf ("INFO: emac_rcv_pkt: active queue head = 0\n");
@@ -720,11 +755,13 @@ static int davinci_eth_rcv_packet (struct eth_device *dev)
tail_desc->next = BD_TO_HW((ulong) curr_desc);
status = tail_desc->pkt_flag_len;
if (status & EMAC_CPPI_EOQ_BIT) {
+ davinci_flush_desc(tail_desc);
writel(BD_TO_HW((ulong)curr_desc),
&adap_emac->RX0HDP);
status &= ~EMAC_CPPI_EOQ_BIT;
tail_desc->pkt_flag_len = status;
}
+ davinci_flush_desc(tail_desc);
}
return (ret);
}
diff --git a/drivers/net/davinci_emac.h b/drivers/net/davinci_emac.h
index a42c93a..37c841c 100644
--- a/drivers/net/davinci_emac.h
+++ b/drivers/net/davinci_emac.h
@@ -24,8 +24,9 @@
/* Ethernet Min/Max packet size */
#define EMAC_MIN_ETHERNET_PKT_SIZE 60
#define EMAC_MAX_ETHERNET_PKT_SIZE 1518
-/* 1518 + 18 = 1536 (packet aligned on 32 byte boundry) */
-#define EMAC_PKT_ALIGN 18
+/* Buffer size (should be aligned on 32 byte and cache line) */
+#define EMAC_RXBUF_SIZE ALIGN(ALIGN(EMAC_MAX_ETHERNET_PKT_SIZE, 32),\
+ ARCH_DMA_MINALIGN)
/* Number of RX packet buffers
* NOTE: Only 1 buffer supported as of now
--
1.7.6.4
More information about the U-Boot
mailing list