[U-Boot] [PATCH 1/4] PXA: Drop CERF250 board
Simon Glass
sjg at chromium.org
Mon Nov 28 18:12:30 CET 2011
Hi Marek,
On Fri, Nov 25, 2011 at 10:53 AM, Marek Vasut <marek.vasut at gmail.com> wrote:
> The board is unmaintained and maintainer doesn't respond.
Should this and the other patches be version 2, or perhaps 3?
Also I like Mike's suggested phrasing (something like "The board
doesn't build and maintainer doesn't respond") since if it built OK we
would presumably just leave it.
Regards,
Simon
>
> Signed-off-by: Marek Vasut <marek.vasut at gmail.com>
> Cc: Simon Glass <sjg at chromium.org>
> Cc: Anatolij Gustschin <agust at denx.de>
> ---
> MAINTAINERS | 4 -
> board/cerf250/Makefile | 43 -----
> board/cerf250/cerf250.c | 85 ---------
> board/cerf250/flash.c | 429 ---------------------------------------------
> boards.cfg | 1 -
> doc/README.scrapyard | 1 +
> include/configs/cerf250.h | 229 ------------------------
> 7 files changed, 1 insertions(+), 791 deletions(-)
> delete mode 100644 board/cerf250/Makefile
> delete mode 100644 board/cerf250/cerf250.c
> delete mode 100644 board/cerf250/flash.c
> delete mode 100644 include/configs/cerf250.h
>
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 37bbb34..3835154 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -711,10 +711,6 @@ Sergey Kubushyn <ksi at koi8.net>
> SONATA ARM926EJS
> SCHMOOGIE ARM926EJS
>
> -Prakash Kumar <prakash at embedx.com>
> -
> - cerf250 xscale/pxa
> -
> Vipin Kumar <vipin.kumar at st.com>
>
> spear300 ARM926EJS (spear300 Soc)
> diff --git a/board/cerf250/Makefile b/board/cerf250/Makefile
> deleted file mode 100644
> index cf4742e..0000000
> --- a/board/cerf250/Makefile
> +++ /dev/null
> @@ -1,43 +0,0 @@
> -#
> -# (C) Copyright 2000-2006
> -# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
> -#
> -# See file CREDITS for list of people who contributed to this
> -# project.
> -#
> -# This program is free software; you can redistribute it and/or
> -# modify it under the terms of the GNU General Public License as
> -# published by the Free Software Foundation; either version 2 of
> -# the License, or (at your option) any later version.
> -#
> -# This program is distributed in the hope that it will be useful,
> -# but WITHOUT ANY WARRANTY; without even the implied warranty of
> -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> -# GNU General Public License for more details.
> -#
> -# You should have received a copy of the GNU General Public License
> -# along with this program; if not, write to the Free Software
> -# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
> -# MA 02111-1307 USA
> -#
> -
> -include $(TOPDIR)/config.mk
> -
> -LIB = $(obj)lib$(BOARD).o
> -
> -COBJS := cerf250.o flash.o
> -
> -SRCS := $(COBJS:.o=.c)
> -OBJS := $(addprefix $(obj),$(COBJS))
> -
> -$(LIB): $(obj).depend $(OBJS)
> - $(call cmd_link_o_target, $(OBJS))
> -
> -#########################################################################
> -
> -# defines $(obj).depend target
> -include $(SRCTREE)/rules.mk
> -
> -sinclude $(obj).depend
> -
> -#########################################################################
> diff --git a/board/cerf250/cerf250.c b/board/cerf250/cerf250.c
> deleted file mode 100644
> index 043afea..0000000
> --- a/board/cerf250/cerf250.c
> +++ /dev/null
> @@ -1,85 +0,0 @@
> -/*
> - * (C) Copyright 2002
> - * Kyle Harris, Nexus Technologies, Inc. kharris at nexus-tech.net
> - *
> - * (C) Copyright 2002
> - * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
> - * Marius Groeger <mgroeger at sysgo.de>
> - *
> - * See file CREDITS for list of people who contributed to this
> - * project.
> - *
> - * This program is free software; you can redistribute it and/or
> - * modify it under the terms of the GNU General Public License as
> - * published by the Free Software Foundation; either version 2 of
> - * the License, or (at your option) any later version.
> - *
> - * This program is distributed in the hope that it will be useful,
> - * but WITHOUT ANY WARRANTY; without even the implied warranty of
> - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> - * GNU General Public License for more details.
> - *
> - * You should have received a copy of the GNU General Public License
> - * along with this program; if not, write to the Free Software
> - * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
> - * MA 02111-1307 USA
> - */
> -
> -#include <common.h>
> -#include <netdev.h>
> -
> -DECLARE_GLOBAL_DATA_PTR;
> -
> -/* ------------------------------------------------------------------------- */
> -
> -
> -/*
> - * Miscelaneous platform dependent initialisations
> - */
> -
> -int board_init (void)
> -{
> - /* We have RAM, disable cache */
> - dcache_disable();
> - icache_disable();
> -
> - /* arch number of cerf PXA Board */
> - gd->bd->bi_arch_number = MACH_TYPE_PXA_CERF;
> -
> - /* adress of boot parameters */
> - gd->bd->bi_boot_params = 0xa0000100;
> -
> - return 0;
> -}
> -
> -int board_late_init(void)
> -{
> - setenv("stdout", "serial");
> - setenv("stderr", "serial");
> - return 0;
> -}
> -
> -extern void pxa_dram_init(void);
> -int dram_init(void)
> -{
> - pxa_dram_init();
> - gd->ram_size = PHYS_SDRAM_1_SIZE;
> - return 0;
> -}
> -
> -void dram_init_banksize(void)
> -{
> - gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
> - gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
> -}
> -
> -#ifdef CONFIG_CMD_NET
> -int board_eth_init(bd_t *bis)
> -{
> - int rc = 0;
> -#ifdef CONFIG_SMC91111
> - rc = smc91111_initialize(0, CONFIG_SMC91111_BASE);
> -#endif
> - return rc;
> -}
> -#endif
> diff --git a/board/cerf250/flash.c b/board/cerf250/flash.c
> deleted file mode 100644
> index e1e7807..0000000
> --- a/board/cerf250/flash.c
> +++ /dev/null
> @@ -1,429 +0,0 @@
> -/*
> - * (C) Copyright 2001
> - * Kyle Harris, Nexus Technologies, Inc. kharris at nexus-tech.net
> - *
> - * (C) Copyright 2001
> - * Wolfgang Denk, DENX Software Engineering, wd at denx.de.
> - *
> - * See file CREDITS for list of people who contributed to this
> - * project.
> - *
> - * This program is free software; you can redistribute it and/or
> - * modify it under the terms of the GNU General Public License as
> - * published by the Free Software Foundation; either version 2 of
> - * the License, or (at your option) any later version.
> - *
> - * This program is distributed in the hope that it will be useful,
> - * but WITHOUT ANY WARRANTY; without even the implied warranty of
> - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> - * GNU General Public License for more details.
> - *
> - * You should have received a copy of the GNU General Public License
> - * along with this program; if not, write to the Free Software
> - * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
> - * MA 02111-1307 USA
> - */
> -
> -#include <common.h>
> -#include <linux/byteorder/swab.h>
> -
> -
> -flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */
> -
> -/* Board support for 1 or 2 flash devices */
> -#define FLASH_PORT_WIDTH32
> -#undef FLASH_PORT_WIDTH16
> -
> -#ifdef FLASH_PORT_WIDTH16
> -#define FLASH_PORT_WIDTH ushort
> -#define FLASH_PORT_WIDTHV vu_short
> -#define SWAP(x) __swab16(x)
> -#else
> -#define FLASH_PORT_WIDTH ulong
> -#define FLASH_PORT_WIDTHV vu_long
> -#define SWAP(x) __swab32(x)
> -#endif
> -
> -#define FPW FLASH_PORT_WIDTH
> -#define FPWV FLASH_PORT_WIDTHV
> -
> -#define mb() __asm__ __volatile__ ("" : : : "memory")
> -
> -/*-----------------------------------------------------------------------
> - * Functions
> - */
> -static ulong flash_get_size (FPW *addr, flash_info_t *info);
> -static int write_data (flash_info_t *info, ulong dest, FPW data);
> -static void flash_get_offsets (ulong base, flash_info_t *info);
> -void inline spin_wheel (void);
> -
> -/*-----------------------------------------------------------------------
> - */
> -
> -unsigned long flash_init (void)
> -{
> - int i;
> - ulong size = 0;
> -
> - for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) {
> - switch (i) {
> - case 0:
> - flash_get_size ((FPW *) PHYS_FLASH_1, &flash_info[i]);
> - flash_get_offsets (PHYS_FLASH_1, &flash_info[i]);
> - break;
> - case 1:
> - flash_get_size ((FPW *) PHYS_FLASH_2, &flash_info[i]);
> - flash_get_offsets (PHYS_FLASH_2, &flash_info[i]);
> - break;
> - default:
> - panic ("configured too many flash banks!\n");
> - break;
> - }
> - size += flash_info[i].size;
> - }
> -
> - /* Protect monitor and environment sectors
> - */
> - flash_protect ( FLAG_PROTECT_SET,
> - CONFIG_SYS_FLASH_BASE,
> - CONFIG_SYS_FLASH_BASE + monitor_flash_len - 1,
> - &flash_info[0] );
> -
> - flash_protect ( FLAG_PROTECT_SET,
> - CONFIG_ENV_ADDR,
> - CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1, &flash_info[0] );
> -
> - return size;
> -}
> -
> -/*-----------------------------------------------------------------------
> - */
> -static void flash_get_offsets (ulong base, flash_info_t *info)
> -{
> - int i;
> -
> - if (info->flash_id == FLASH_UNKNOWN) {
> - return;
> - }
> -
> - if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL) {
> - for (i = 0; i < info->sector_count; i++) {
> - info->start[i] = base + (i * PHYS_FLASH_SECT_SIZE);
> - info->protect[i] = 0;
> - }
> - }
> -}
> -
> -/*-----------------------------------------------------------------------
> - */
> -void flash_print_info (flash_info_t *info)
> -{
> - int i;
> -
> - if (info->flash_id == FLASH_UNKNOWN) {
> - printf ("missing or unknown FLASH type\n");
> - return;
> - }
> -
> - switch (info->flash_id & FLASH_VENDMASK) {
> - case FLASH_MAN_INTEL:
> - printf ("INTEL ");
> - break;
> - default:
> - printf ("Unknown Vendor ");
> - break;
> - }
> -
> - switch (info->flash_id & FLASH_TYPEMASK) {
> - case FLASH_28F128J3A:
> - printf ("28F128J3A\n");
> - break;
> - default:
> - printf ("Unknown Chip Type\n");
> - break;
> - }
> -
> - printf (" Size: %ld MB in %d Sectors\n",
> - info->size >> 20, info->sector_count);
> -
> - printf (" Sector Start Addresses:");
> - for (i = 0; i < info->sector_count; ++i) {
> - if ((i % 5) == 0)
> - printf ("\n ");
> - printf (" %08lX%s",
> - info->start[i],
> - info->protect[i] ? " (RO)" : " ");
> - }
> - printf ("\n");
> - return;
> -}
> -
> -/*
> - * The following code cannot be run from FLASH!
> - */
> -static ulong flash_get_size (FPW *addr, flash_info_t *info)
> -{
> - volatile FPW value;
> -
> - /* Write auto select command: read Manufacturer ID */
> - addr[0x5555] = (FPW) 0x00AA00AA;
> - addr[0x2AAA] = (FPW) 0x00550055;
> - addr[0x5555] = (FPW) 0x00900090;
> -
> - mb ();
> - value = addr[0];
> -
> - switch (value) {
> -
> - case (FPW) INTEL_MANUFACT:
> - info->flash_id = FLASH_MAN_INTEL;
> - break;
> -
> - default:
> - info->flash_id = FLASH_UNKNOWN;
> - info->sector_count = 0;
> - info->size = 0;
> - addr[0] = (FPW) 0x00FF00FF; /* restore read mode */
> - return (0); /* no or unknown flash */
> - }
> -
> - mb ();
> - value = addr[1]; /* device ID */
> -
> - switch (value) {
> -
> - case (FPW) INTEL_ID_28F128J3A:
> - info->flash_id += FLASH_28F128J3A;
> - info->sector_count = 128;
> - info->size = 0x02000000;
> - break; /* => 16 MB */
> -
> - default:
> - info->flash_id = FLASH_UNKNOWN;
> - break;
> - }
> -
> - if (info->sector_count > CONFIG_SYS_MAX_FLASH_SECT) {
> - printf ("** ERROR: sector count %d > max (%d) **\n",
> - info->sector_count, CONFIG_SYS_MAX_FLASH_SECT);
> - info->sector_count = CONFIG_SYS_MAX_FLASH_SECT;
> - }
> -
> - addr[0] = (FPW) 0x00FF00FF; /* restore read mode */
> -
> - return (info->size);
> -}
> -
> -
> -/*-----------------------------------------------------------------------
> - */
> -
> -int flash_erase (flash_info_t *info, int s_first, int s_last)
> -{
> - int flag, prot, sect;
> - ulong type, start;
> - int rcode = 0;
> -
> - if ((s_first < 0) || (s_first > s_last)) {
> - if (info->flash_id == FLASH_UNKNOWN) {
> - printf ("- missing\n");
> - } else {
> - printf ("- no sectors to erase\n");
> - }
> - return 1;
> - }
> -
> - type = (info->flash_id & FLASH_VENDMASK);
> - if ((type != FLASH_MAN_INTEL)) {
> - printf ("Can't erase unknown flash type %08lx - aborted\n",
> - info->flash_id);
> - return 1;
> - }
> -
> - prot = 0;
> - for (sect = s_first; sect <= s_last; ++sect) {
> - if (info->protect[sect]) {
> - prot++;
> - }
> - }
> -
> - if (prot) {
> - printf ("- Warning: %d protected sectors will not be erased!\n",
> - prot);
> - } else {
> - printf ("\n");
> - }
> -
> - /* Disable interrupts which might cause a timeout here */
> - flag = disable_interrupts ();
> -
> - /* Start erase on unprotected sectors */
> - for (sect = s_first; sect <= s_last; sect++) {
> - if (info->protect[sect] == 0) { /* not protected */
> - FPWV *addr = (FPWV *) (info->start[sect]);
> - FPW status;
> -
> - printf ("Erasing sector %2d ... ", sect);
> -
> - /* arm simple, non interrupt dependent timer */
> - start = get_timer(0);
> -
> - *addr = (FPW) 0x00500050; /* clear status register */
> - *addr = (FPW) 0x00200020; /* erase setup */
> - *addr = (FPW) 0x00D000D0; /* erase confirm */
> -
> - while (((status = *addr) & (FPW) 0x00800080) != (FPW) 0x00800080) {
> - if (get_timer(start) > CONFIG_SYS_FLASH_ERASE_TOUT) {
> - printf ("Timeout\n");
> - *addr = (FPW) 0x00B000B0; /* suspend erase */
> - *addr = (FPW) 0x00FF00FF; /* reset to read mode */
> - rcode = 1;
> - break;
> - }
> - }
> -
> - *addr = 0x00500050; /* clear status register cmd. */
> - *addr = 0x00FF00FF; /* resest to read mode */
> -
> - printf (" done\n");
> - }
> - }
> - return rcode;
> -}
> -
> -/*-----------------------------------------------------------------------
> - * Copy memory to flash, returns:
> - * 0 - OK
> - * 1 - write timeout
> - * 2 - Flash not erased
> - * 4 - Flash not identified
> - */
> -
> -int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
> -{
> - ulong cp, wp;
> - FPW data;
> - int count, i, l, rc, port_width;
> -
> - if (info->flash_id == FLASH_UNKNOWN) {
> - return 4;
> - }
> -/* get lower word aligned address */
> -#ifdef FLASH_PORT_WIDTH16
> - wp = (addr & ~1);
> - port_width = 2;
> -#else
> - wp = (addr & ~3);
> - port_width = 4;
> -#endif
> -
> - /*
> - * handle unaligned start bytes
> - */
> - if ((l = addr - wp) != 0) {
> - data = 0;
> - for (i = 0, cp = wp; i < l; ++i, ++cp) {
> - data = (data << 8) | (*(uchar *) cp);
> - }
> - for (; i < port_width && cnt > 0; ++i) {
> - data = (data << 8) | *src++;
> - --cnt;
> - ++cp;
> - }
> - for (; cnt == 0 && i < port_width; ++i, ++cp) {
> - data = (data << 8) | (*(uchar *) cp);
> - }
> -
> - if ((rc = write_data (info, wp, SWAP (data))) != 0) {
> - return (rc);
> - }
> - wp += port_width;
> - }
> -
> - /*
> - * handle word aligned part
> - */
> - count = 0;
> - while (cnt >= port_width) {
> - data = 0;
> - for (i = 0; i < port_width; ++i) {
> - data = (data << 8) | *src++;
> - }
> - if ((rc = write_data (info, wp, SWAP (data))) != 0) {
> - return (rc);
> - }
> - wp += port_width;
> - cnt -= port_width;
> - if (count++ > 0x800) {
> - spin_wheel ();
> - count = 0;
> - }
> - }
> -
> - if (cnt == 0) {
> - return (0);
> - }
> -
> - /*
> - * handle unaligned tail bytes
> - */
> - data = 0;
> - for (i = 0, cp = wp; i < port_width && cnt > 0; ++i, ++cp) {
> - data = (data << 8) | *src++;
> - --cnt;
> - }
> - for (; i < port_width; ++i, ++cp) {
> - data = (data << 8) | (*(uchar *) cp);
> - }
> -
> - return (write_data (info, wp, SWAP (data)));
> -}
> -
> -/*-----------------------------------------------------------------------
> - * Write a word or halfword to Flash, returns:
> - * 0 - OK
> - * 1 - write timeout
> - * 2 - Flash not erased
> - */
> -static int write_data (flash_info_t *info, ulong dest, FPW data)
> -{
> - FPWV *addr = (FPWV *) dest;
> - ulong status;
> - int flag;
> - ulong start;
> -
> - /* Check if Flash is (sufficiently) erased */
> - if ((*addr & data) != data) {
> - printf ("not erased at %08lx (%lx)\n", (ulong) addr, *addr);
> - return (2);
> - }
> - /* Disable interrupts which might cause a timeout here */
> - flag = disable_interrupts ();
> -
> - *addr = (FPW) 0x00400040; /* write setup */
> - *addr = data;
> -
> - /* arm simple, non interrupt dependent timer */
> - start = get_timer(0);
> -
> - /* wait while polling the status register */
> - while (((status = *addr) & (FPW) 0x00800080) != (FPW) 0x00800080) {
> - if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
> - *addr = (FPW) 0x00FF00FF; /* restore read mode */
> - return (1);
> - }
> - }
> -
> - *addr = (FPW) 0x00FF00FF; /* restore read mode */
> -
> - return (0);
> -}
> -
> -void inline spin_wheel (void)
> -{
> - static int p = 0;
> - static char w[] = "\\/-";
> -
> - printf ("\010%c", w[p]);
> - (++p == 3) ? (p = 0) : 0;
> -}
> diff --git a/boards.cfg b/boards.cfg
> index 7c63449..d65ca12 100644
> --- a/boards.cfg
> +++ b/boards.cfg
> @@ -216,7 +216,6 @@ actux3 arm ixp
> actux4 arm ixp
> dvlhost arm ixp
> balloon3 arm pxa
> -cerf250 arm pxa
> colibri_pxa270 arm pxa
> cradle arm pxa
> lubbock arm pxa
> diff --git a/doc/README.scrapyard b/doc/README.scrapyard
> index cb5e4bc..232cd68 100644
> --- a/doc/README.scrapyard
> +++ b/doc/README.scrapyard
> @@ -11,6 +11,7 @@ easily if here is something they might want to dig for...
>
> Board Arch CPU removed Commit last known maintainer/contact
> =============================================================================
> +cerf250 arm pxa a3f1241 2011-25-11 Prakash Kumar <prakash at embedx.com>
> mpq101 powerpc mpc85xx - 2011-10-23 Alex Dubov <oakad at yahoo.com>
> ixdpg425 arm ixp 0ca8eb7 2011-09-22 Stefan Roese <sr at denx.de>
> ixdp425 arm ixp 0ca8eb7 2011-09-22 Kyle Harris <kharris at nexus-tech.net>
> diff --git a/include/configs/cerf250.h b/include/configs/cerf250.h
> deleted file mode 100644
> index 70427da..0000000
> --- a/include/configs/cerf250.h
> +++ /dev/null
> @@ -1,229 +0,0 @@
> -/*
> - * (C) Copyright 2002
> - * Kyle Harris, Nexus Technologies, Inc. kharris at nexus-tech.net
> - *
> - * (C) Copyright 2002
> - * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
> - * Marius Groeger <mgroeger at sysgo.de>
> - *
> - * Configuation settings for the CERF250 board.
> - *
> - * See file CREDITS for list of people who contributed to this
> - * project.
> - *
> - * This program is free software; you can redistribute it and/or
> - * modify it under the terms of the GNU General Public License as
> - * published by the Free Software Foundation; either version 2 of
> - * the License, or (at your option) any later version.
> - *
> - * This program is distributed in the hope that it will be useful,
> - * but WITHOUT ANY WARRANTY; without even the implied warranty of
> - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> - * GNU General Public License for more details.
> - *
> - * You should have received a copy of the GNU General Public License
> - * along with this program; if not, write to the Free Software
> - * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
> - * MA 02111-1307 USA
> - */
> -
> -#ifndef __CONFIG_H
> -#define __CONFIG_H
> -
> -/*
> - * High Level Configuration Options
> - * (easy to change)
> - */
> -#define CONFIG_PXA250 1 /* This is an PXA250 CPU */
> -#define CONFIG_CERF250 1 /* on Cerf PXA Board */
> -#define CONFIG_BOARD_LATE_INIT
> -#define CONFIG_BAUDRATE 38400
> -#define CONFIG_SYS_TEXT_BASE 0x0
> -
> -#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */
> -
> -/* we will never enable dcache, because we have to setup MMU first */
> -#define CONFIG_SYS_DCACHE_OFF
> -
> -/*
> - * Size of malloc() pool
> - */
> -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024)
> -
> -/*
> - * Hardware drivers
> - */
> -#define CONFIG_SMC91111
> -#define CONFIG_SMC91111_BASE 0x04000300
> -#define CONFIG_SMC_USE_32_BIT
> -
> -/*
> - * select serial console configuration
> - */
> -#define CONFIG_PXA_SERIAL
> -#define CONFIG_FFUART 1 /* we use FFUART on CERF PXA */
> -
> -/* allow to overwrite serial and ethaddr */
> -#define CONFIG_ENV_OVERWRITE
> -
> -/*
> - * BOOTP options
> - */
> -#define CONFIG_BOOTP_BOOTFILESIZE
> -#define CONFIG_BOOTP_BOOTPATH
> -#define CONFIG_BOOTP_GATEWAY
> -#define CONFIG_BOOTP_HOSTNAME
> -
> -
> -/*
> - * Command line configuration.
> - */
> -#include <config_cmd_default.h>
> -
> -
> -#define CONFIG_BOOTDELAY 3
> -#define CONFIG_ETHADDR 00:D0:CA:F1:3C:D2
> -#define CONFIG_NETMASK 255.255.255.0
> -#define CONFIG_IPADDR 192.168.0.5
> -#define CONFIG_SERVERIP 192.168.0.2
> -#define CONFIG_BOOTCOMMAND "bootm 0xC0000"
> -#define CONFIG_BOOTARGS "root=/dev/mtdblock3 rootfstype=jffs2 console=ttyS0,38400"
> -#define CONFIG_CMDLINE_TAG
> -
> -#if defined(CONFIG_CMD_KGDB)
> -#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
> -#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
> -#endif
> -
> -/*
> - * Miscellaneous configurable options
> - */
> -#define CONFIG_SYS_HUSH_PARSER 1
> -#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
> -
> -#define CONFIG_SYS_LONGHELP /* undef to save memory */
> -#ifdef CONFIG_SYS_HUSH_PARSER
> -#define CONFIG_SYS_PROMPT "uboot$ " /* Monitor Command Prompt */
> -#else
> -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */
> -#endif
> -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
> -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
> - /* Print Buffer Size */
> -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
> -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
> -#define CONFIG_SYS_DEVICE_NULLDEV 1
> -
> -#define CONFIG_SYS_MEMTEST_START 0xa0400000 /* memtest works on */
> -#define CONFIG_SYS_MEMTEST_END 0xa0800000 /* 4 ... 8 MB in DRAM */
> -
> -#define CONFIG_SYS_LOAD_ADDR 0xa2000000 /* default load address */
> -
> -#define CONFIG_SYS_HZ 1000
> -#define CONFIG_SYS_CPUSPEED 0x141 /* set core clock to 400/200/100 MHz */
> -
> -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
> -
> -
> -/*
> - * Stack sizes
> - *
> - * The stack sizes are set up in start.S using the settings below
> - */
> -#define CONFIG_STACKSIZE (128*1024) /* regular stack */
> -#ifdef CONFIG_USE_IRQ
> -#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */
> -#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */
> -#endif
> -
> -/*
> - * Physical Memory Map
> - */
> -#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */
> -#define PHYS_SDRAM_1 0xa0000000 /* SDRAM Bank #1 */
> -#define PHYS_SDRAM_1_SIZE 0x04000000 /* 64 MB */
> -
> -#define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */
> -#define PHYS_FLASH_2 0x04000000 /* Flash Bank #2 */
> -#define PHYS_FLASH_SIZE 0x02000000 /* 32 MB */
> -#define PHYS_FLASH_BANK_SIZE 0x02000000 /* 32 MB Banks */
> -#define PHYS_FLASH_SECT_SIZE 0x00040000 /* 256 KB sectors (x2) */
> -
> -#define CONFIG_SYS_DRAM_BASE 0xa0000000
> -#define CONFIG_SYS_DRAM_SIZE 0x04000000
> -
> -#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1
> -
> -#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
> -#define CONFIG_SYS_INIT_SP_ADDR (GENERATED_GBL_DATA_SIZE + PHYS_SDRAM_1)
> -
> -/*
> - * GPIO settings
> - */
> -
> -
> -#define CONFIG_SYS_GPSR0_VAL 0x00408030
> -#define CONFIG_SYS_GPSR1_VAL 0x00BFA882
> -#define CONFIG_SYS_GPSR2_VAL 0x0001C000
> -#define CONFIG_SYS_GPCR0_VAL 0xC0031100
> -#define CONFIG_SYS_GPCR1_VAL 0xFC400300
> -#define CONFIG_SYS_GPCR2_VAL 0x00003FFF
> -#define CONFIG_SYS_GPDR0_VAL 0xC0439330
> -#define CONFIG_SYS_GPDR1_VAL 0xFCFFAB82
> -#define CONFIG_SYS_GPDR2_VAL 0x0001FFFF
> -#define CONFIG_SYS_GAFR0_L_VAL 0x80000000
> -#define CONFIG_SYS_GAFR0_U_VAL 0xA5000010
> -#define CONFIG_SYS_GAFR1_L_VAL 0x60008018
> -#define CONFIG_SYS_GAFR1_U_VAL 0xAAA5AAAA
> -#define CONFIG_SYS_GAFR2_L_VAL 0xAAA0000A
> -#define CONFIG_SYS_GAFR2_U_VAL 0x00000002
> -
> -#define CONFIG_SYS_PSSR_VAL 0x20
> -
> -#define CONFIG_SYS_CCCR CCCR_L27|CCCR_M2|CCCR_N10
> -#define CONFIG_SYS_CKEN 0x0
> -
> -/*
> - * Memory settings
> - */
> -#define CONFIG_SYS_MSC0_VAL 0x12447FF0
> -#define CONFIG_SYS_MSC1_VAL 0x12BC5554
> -#define CONFIG_SYS_MSC2_VAL 0x7FF97FF1
> -#define CONFIG_SYS_MDCNFG_VAL 0x00001AC9
> -#define CONFIG_SYS_MDREFR_VAL 0x03CDC017
> -#define CONFIG_SYS_MDMRS_VAL 0x00000000
> -#define CONFIG_SYS_FLYCNFG_VAL 0x00000000
> -#define CONFIG_SYS_SXCNFG_VAL 0x00000000
> -
> -/*
> - * PCMCIA and CF Interfaces
> - */
> -#define CONFIG_SYS_MECR_VAL 0x00000000
> -#define CONFIG_SYS_MCMEM0_VAL 0x00010504
> -#define CONFIG_SYS_MCMEM1_VAL 0x00010504
> -#define CONFIG_SYS_MCATT0_VAL 0x00010504
> -#define CONFIG_SYS_MCATT1_VAL 0x00010504
> -#define CONFIG_SYS_MCIO0_VAL 0x00004715
> -#define CONFIG_SYS_MCIO1_VAL 0x00004715
> -
> -#define _LED 0x08000010 /*check this */
> -#define LED_BLANK 0x08000040
> -#define LED_GPIO 0x10
> -
> -/*
> - * FLASH and environment organization
> - */
> -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */
> -#define CONFIG_SYS_MAX_FLASH_SECT 128 /* max number of sectors on one chip */
> -
> -/* timeout values are in ticks */
> -#define CONFIG_SYS_FLASH_ERASE_TOUT (25*CONFIG_SYS_HZ) /* Timeout for Flash Erase */
> -#define CONFIG_SYS_FLASH_WRITE_TOUT (25*CONFIG_SYS_HZ) /* Timeout for Flash Write */
> -
> -#define CONFIG_SYS_MONITOR_LEN 0x40000 /* 256 KiB */
> -#define CONFIG_ENV_IS_IN_FLASH 1
> -#define CONFIG_ENV_ADDR (PHYS_FLASH_1 + CONFIG_SYS_MONITOR_LEN)
> -#define CONFIG_ENV_SIZE 0x40000 /* Total Size of Environment Sector */
> -
> -
> -#endif /* __CONFIG_H */
> --
> 1.7.7.1
>
>
More information about the U-Boot
mailing list