[U-Boot] [PATCH v4 3/7] arm, da850evm: Do pinmux configuration for EMAC together with other pinmuxes

[Christian Riesch]

Pinmux configuration for the EMAC was done in a separate call
of davinci_configure_pin_mux(). This patch moves all the pinmux
configuration that is done for this board to a common place.

Signed-off-by: Christian Riesch <christian.riesch at omicron.at>
Cc: Heiko Schocher <hs at denx.de>
Cc: Sandeep Paulraj <s-paulraj at ti.com>
Cc: Sudhakar Rajashekhara <sudhakar.raj at ti.com>
Acked-by: Heiko Schocher <hs at denx.de>
---
 board/davinci/da8xxevm/da850evm.c |    6 +++---
 1 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/board/davinci/da8xxevm/da850evm.c b/board/davinci/da8xxevm/da850evm.c
index 844e585..9b68c5c 100644
--- a/board/davinci/da8xxevm/da850evm.c
+++ b/board/davinci/da8xxevm/da850evm.c
@@ -223,6 +223,9 @@ int misc_init_r(void)
 }
 
 static const struct pinmux_resource pinmuxes[] = {
+#ifdef CONFIG_DRIVER_TI_EMAC
+	PINMUX_ITEM(emac_pins),
+#endif
 #ifdef CONFIG_SPI_FLASH
 	PINMUX_ITEM(spi1_pins),
 #endif
@@ -344,9 +347,6 @@ int board_init(void)
 #endif
 
 #ifdef CONFIG_DRIVER_TI_EMAC
-	if (davinci_configure_pin_mux(emac_pins, ARRAY_SIZE(emac_pins)) != 0)
-		return 1;
-
 	davinci_emac_mii_mode_sel(HAS_RMII);
 #endif /* CONFIG_DRIVER_TI_EMAC */
 
-- 
1.7.0.4