[U-Boot] [PATCH] powerpc/p3060qds: Add board related support for P3060QDS platform
Kumar Gala
kumar.gala at freescale.com
Tue Nov 29 16:06:52 CET 2011
On Nov 22, 2011, at 2:51 AM, Shengzhou Liu wrote:
> The P3060QDS is a Freescale reference board for the six-core P3060 SOC.
>
> P3060QDS Board Overview:
> Memory subsystem:
> - 2G Bytes unbuffered DDR3 SDRAM SO-DIMM(64bit bus)
> - 128M Bytes NOR flash single-chip memory
> - 16M Bytes SPI flash
> - 8K Bytes AT24C64 I2C EEPROM for RCW
> Ethernet:
> - Eight Ethernet controllers (4x1G + 4x1G/2.5G)
> - Three VSC8641 PHYs on board (2xRGMII + 1xMII)
> - Suport multiple Vitesse VSC8234 SGMII Cards in Slot1/2/3
> PCIe: Two PCI Express 2.0 controllers/ports
> USB: Two USB2.0, USB1(TYPE-A) and USB2(TYPE-AB) on board
> I2C: Four I2C controllers
> UART: Supports two dUARTs up to 115200 bps for console
> RapidIO: Two RapidIO, sRIO1 and sRIO2
>
> Signed-off-by: Shengzhou Liu <Shengzhou.Liu at freescale.com>
> Signed-off-by: York Sun <yorksun at freescale.com>
> Signed-off-by: Kumar Gala <galak at kernel.crashing.org>
> ---
> based on 'master' branch of Wolfgang's tree.
>
> board/freescale/common/Makefile | 3 +
> board/freescale/common/ics307_clk.c | 21 +-
> board/freescale/common/qixis.c | 151 +++++++++
> board/freescale/common/qixis.h | 101 ++++++
> board/freescale/p3060qds/Makefile | 54 ++++
> board/freescale/p3060qds/ddr.c | 248 +++++++++++++++
> board/freescale/p3060qds/eth.c | 482 +++++++++++++++++++++++++++++
> board/freescale/p3060qds/fixed_ddr.c | 214 +++++++++++++
> board/freescale/p3060qds/p3060qds.c | 341 ++++++++++++++++++++
> board/freescale/p3060qds/p3060qds.h | 30 ++
> board/freescale/p3060qds/p3060qds_qixis.h | 74 +++++
> boards.cfg | 3 +
> doc/README.p3060qds | 111 +++++++
> include/configs/P3060QDS.h | 48 +++
> include/configs/corenet_ds.h | 6 +-
> 15 files changed, 1878 insertions(+), 9 deletions(-)
> create mode 100644 board/freescale/common/qixis.c
> create mode 100644 board/freescale/common/qixis.h
> create mode 100644 board/freescale/p3060qds/Makefile
> create mode 100644 board/freescale/p3060qds/ddr.c
> create mode 100644 board/freescale/p3060qds/eth.c
> create mode 100644 board/freescale/p3060qds/fixed_ddr.c
> create mode 100644 board/freescale/p3060qds/p3060qds.c
> create mode 100644 board/freescale/p3060qds/p3060qds.h
> create mode 100644 board/freescale/p3060qds/p3060qds_qixis.h
> create mode 100644 doc/README.p3060qds
> create mode 100644 include/configs/P3060QDS.h
applied to 85xx
- k
More information about the U-Boot
mailing list