[U-Boot] [PATCH v4 0/5] arm, davinci: add am1808 based enbw_cmc board

[Christian Riesch]

Hello Heiko,

On Tue, Nov 29, 2011 at 1:33 PM, Heiko Schocher <hs at denx.de> wrote:
> repost from:
> [U-Boot] [PATCH v3 0/3] arm, davinci: add am1808 based enbw_cmc board
> http://lists.denx.de/pipermail/u-boot/2011-November/111427.html
[...]

> Following patches are needed for this patchset
> - patchset from Christian Riesch:
> [U-Boot] [PATCH v3 00/15] Add an SPL to boot the da850evm from SPI
> http://lists.denx.de/pipermail/u-boot/2011-November/111182.html

Actually, your patches don't need the full patchset but only patches 1
to 7. I split my patchset into smaller pieces, so you only need this
patchset:

[U-Boot] [PATCH v4 0/7] Remove duplication of pinmux configuration code
http://lists.denx.de/pipermail/u-boot/2011-November/111607.html

and the two patches below.

>
> - [U-Boot,1/2] arm, arm926ejs: always do cpu critical inits
> patchwork.ozlabs.org/patch/124787/
>
> - [U-Boot] arm, fdt: update ethernet mac address before booting Linux
> http://patchwork.ozlabs.org/patch/114736/
>

Regards, Christian