[U-Boot] [PATCH 2/2] x86: Add support for booting Linux using the 32 bit boot protocol
Gabe Black
gabeblack at chromium.org
Wed Nov 30 04:11:10 CET 2011
This change conditionally modifies the zboot command so that it can use the
32 bit boot protocol. This is necessary because the 16 bit realmode entry
point assumes that it can call BIOS services which neither coreboot nor
u-boot provide.
Signed-off-by: Gabe Black <gabeblack at chromium.org>
---
arch/x86/include/asm/zimage.h | 4 +-
arch/x86/lib/bootm.c | 6 +++-
arch/x86/lib/zimage.c | 49 +++++++++++++++++++++++++++++++---------
3 files changed, 44 insertions(+), 15 deletions(-)
diff --git a/arch/x86/include/asm/zimage.h b/arch/x86/include/asm/zimage.h
index 1a77e00..8ee6a74 100644
--- a/arch/x86/include/asm/zimage.h
+++ b/arch/x86/include/asm/zimage.h
@@ -46,8 +46,8 @@
void *load_zimage(char *image, unsigned long kernel_size,
unsigned long initrd_addr, unsigned long initrd_size,
- int auto_boot);
+ int auto_boot, void **load_address);
-void boot_zimage(void *setup_base);
+void boot_zimage(void *setup_base, void *load_address);
#endif
diff --git a/arch/x86/lib/bootm.c b/arch/x86/lib/bootm.c
index bac7b4f..0905809 100644
--- a/arch/x86/lib/bootm.c
+++ b/arch/x86/lib/bootm.c
@@ -38,6 +38,7 @@ int do_bootm_linux(int flag, int argc, char * const argv[],
void *base_ptr = NULL;
ulong os_data, os_len;
image_header_t *hdr;
+ void *load_address;
#if defined(CONFIG_FIT)
const void *data;
@@ -75,7 +76,8 @@ int do_bootm_linux(int flag, int argc, char * const argv[],
#ifdef CONFIG_CMD_ZBOOT
base_ptr = load_zimage((void *)os_data, os_len,
- images->rd_start, images->rd_end - images->rd_start, 0);
+ images->rd_start, images->rd_end - images->rd_start,
+ 0, &load_address);
#endif
if (NULL == base_ptr) {
@@ -92,7 +94,7 @@ int do_bootm_linux(int flag, int argc, char * const argv[],
/* we assume that the kernel is in place */
printf("\nStarting kernel ...\n\n");
- boot_zimage(base_ptr);
+ boot_zimage(base_ptr, load_address);
/* does not return */
error:
diff --git a/arch/x86/lib/zimage.c b/arch/x86/lib/zimage.c
index 3b33486..1003929 100644
--- a/arch/x86/lib/zimage.c
+++ b/arch/x86/lib/zimage.c
@@ -83,13 +83,12 @@ static void build_command_line(char *command_line, int auto_boot)
void *load_zimage(char *image, unsigned long kernel_size,
unsigned long initrd_addr, unsigned long initrd_size,
- int auto_boot)
+ int auto_boot, void **load_address)
{
struct boot_params *setup_base;
int setup_size;
int bootproto;
int big_image;
- void *load_address;
struct boot_params *params = (struct boot_params *)image;
struct setup_header *hdr = ¶ms->hdr;
@@ -136,14 +135,23 @@ void *load_zimage(char *image, unsigned long kernel_size,
/* Determine load address */
if (big_image)
- load_address = (void *)BZIMAGE_LOAD_ADDR;
+ *load_address = (void *)BZIMAGE_LOAD_ADDR;
else
- load_address = (void *)ZIMAGE_LOAD_ADDR;
+ *load_address = (void *)ZIMAGE_LOAD_ADDR;
+
+#if defined CONFIG_ZBOOT_32
+ printf("Building boot_params at 0x%8.8lx\n", (ulong)setup_base);
+ memset(setup_base, 0, sizeof(*setup_base));
+ setup_base->hdr = params->hdr;
+ setup_base->e820_entries = install_e820_map(
+ ARRAY_SIZE(setup_base->e820_map), setup_base->e820_map);
+#else
/* load setup */
printf("Moving Real-Mode Code to 0x%8.8lx (%d bytes)\n",
(ulong)setup_base, setup_size);
memmove(setup_base, image, setup_size);
+#endif
printf("Using boot protocol version %x.%02x\n",
(bootproto & 0xff00) >> 8, bootproto & 0xff);
@@ -182,7 +190,7 @@ void *load_zimage(char *image, unsigned long kernel_size,
if (hdr->setup_sects >= 15) {
printf("Linux kernel version %s\n",
- (char *)setup_base +
+ (char *)params +
hdr->kernel_version + 0x200);
} else {
printf("Setup Sectors < 15 - "
@@ -237,17 +245,33 @@ void *load_zimage(char *image, unsigned long kernel_size,
build_command_line((char *)setup_base + COMMAND_LINE_OFFSET, auto_boot);
printf("Loading %czImage at address 0x%08x (%ld bytes)\n",
- big_image ? 'b' : ' ', (u32)load_address, kernel_size);
+ big_image ? 'b' : ' ', (u32)*load_address, kernel_size);
-
- memmove(load_address, image + setup_size, kernel_size);
+ memmove(*load_address, image + setup_size, kernel_size);
/* ready for booting */
return setup_base;
}
-void boot_zimage(void *setup_base)
+void boot_zimage(void *setup_base, void *load_address)
{
+#if defined CONFIG_ZBOOT_32
+ /*
+ * Set %ebx, %ebp, and %edi to 0, %esi to point to the boot_params
+ * structure, and then jump to the kernel. We assume that %cs is
+ * 0x10, 4GB flat, and read/execute, and the data segments are 0x18,
+ * 4GB flat, and read/write. U-boot is setting them up that way for
+ * itself in arch/i386/cpu/cpu.c.
+ */
+ __asm__ __volatile__ (
+ "movl $0, %%ebp \n"
+ "cli \n"
+ "jmp %[kernel_entry] \n"
+ :: [kernel_entry]"r"(load_address),
+ [boot_params] "S"(setup_base),
+ "b"(0), "D"(0)
+ );
+#else
struct pt_regs regs;
memset(®s, 0, sizeof(struct pt_regs));
@@ -258,12 +282,14 @@ void boot_zimage(void *setup_base)
regs.eflags = 0;
enter_realmode(((u32)setup_base + SETUP_START_OFFSET) >> 4, 0,
®s, ®s);
+#endif
}
int do_zboot(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[])
{
void *base_ptr;
void *bzImage_addr = NULL;
+ void *load_address;
char *s;
ulong bzImage_size = 0;
@@ -287,7 +313,8 @@ int do_zboot(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[])
bzImage_size = simple_strtoul(argv[2], NULL, 16);
/* Lets look for */
- base_ptr = load_zimage(bzImage_addr, bzImage_size, 0, 0, 0);
+ base_ptr = load_zimage(bzImage_addr, bzImage_size, 0, 0, 0,
+ &load_address);
if (!base_ptr) {
printf("## Kernel loading failed ...\n");
@@ -299,7 +326,7 @@ int do_zboot(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[])
/* we assume that the kernel is in place */
printf("\nStarting kernel ...\n\n");
- boot_zimage(base_ptr);
+ boot_zimage(base_ptr, load_address);
/* does not return */
}
--
1.7.3.1
More information about the U-Boot
mailing list