[U-Boot] [PATCH v4 0/5] arm, davinci: add am1808 based enbw_cmc board

Heiko Schocher hs at denx.de
Wed Nov 30 08:35:07 CET 2011


Hello Tom,

Tom Rini wrote:
> On Tue, Nov 29, 2011 at 5:33 AM, Heiko Schocher <hs at denx.de> wrote:
>> repost from:
>> [U-Boot] [PATCH v3 0/3] arm, davinci: add am1808 based enbw_cmc board
>> http://lists.denx.de/pipermail/u-boot/2011-November/111427.html
>>
>> changes for v4:
>>  - change gp0[15] output state to high
>>  - change gp6[10] output state to high
>>  add comments from Igor Grinberg:
>>  - removed clean, distclean targets from Makefile
>>  - sorted includes
>>  - aligned table
>>  - use misc functions from board/davinci/common moved for this
>>    board/davinci/common/misc.c to arch/arm/cpu/arm926ejs/davinci/misc.c
>>    in a seperate patch
>>  - use da8xx_configure_lpsc_items()
>>  add comments from Wolfgang Denk:
>>  - return instead continue, if gpio_request fails.
>>
>> Following patches are needed for this patchset
>> - patchset from Christian Riesch:
>> [U-Boot] [PATCH v3 00/15] Add an SPL to boot the da850evm from SPI
>> http://lists.denx.de/pipermail/u-boot/2011-November/111182.html
>>
>> - [U-Boot,1/2] arm, arm926ejs: always do cpu critical inits
>> patchwork.ozlabs.org/patch/124787/
> 
> I've taken this one.

Thanks!

> 
>> - [U-Boot] arm, fdt: update ethernet mac address before booting Linux
>> http://patchwork.ozlabs.org/patch/114736/
> 
> I've delegated this to Albert.

Ok, thanks!

> The rest of the series (will be) queued to u-boot-ti, thanks for your patience.

Yep, checked this. The enbw_cmc board build and works fine with u-boot-ti.git

A "./MAKEALL -a arm --soc davinci" show me this errors:

Configuring for davinci_schmoogie board...
schmoogie.c: In function 'board_init':
schmoogie.c:37:27: error: 'MACH_TYPE_SCHMOOGIE' undeclared (first use in this function)
schmoogie.c:37:27: note: each undeclared identifier is reported only once for each function it appears in
make[1]: *** [schmoogie.o] Fehler 1
make: *** [board/davinci/schmoogie/libschmoogie.o] Fehler 2
arm-linux-gnueabi-size: './u-boot': No such file
Configuring for davinci_sffsdr board...
   text    data     bss     dec     hex filename
 187778    6216   54620  248614   3cb26 ./u-boot
Configuring for davinci_sonata board...
sonata.c: In function 'board_init':
sonata.c:38:27: error: 'MACH_TYPE_SONATA' undeclared (first use in this function)
sonata.c:38:27: note: each undeclared identifier is reported only once for each function it appears in
make[1]: *** [sonata.o] Fehler 1
make: *** [board/davinci/sonata/libsonata.o] Fehler 2
arm-linux-gnueabi-size: './u-boot': No such file

Fixes for this from Christian Riesch
for MACH_TYPE_SCHMOOGIE
http://www.mail-archive.com/u-boot@lists.denx.de/msg69998.html

for MACH_TYPE_SONATA
http://www.mail-archive.com/u-boot@lists.denx.de/msg69997.html

I could not find this patches in patchwork, nor are they applied
in u-boot-arm.git ... Ah, they are in mainline u-boot.git ... Ok,
they are not lost!

bye,
Heiko
-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany


More information about the U-Boot mailing list