[U-Boot] [PATCH] serial: pl01x: drain PL01x FIFO before baudrate change

[Linus Walleij]

Not draining the FIFO and waiting for the UART to be non-busy
before changing baudrate results in crap characters on the
console, so let's wait for the FIFO to drain and the last
character to be clocked out before we do that.

Signed-off-by: Linus Walleij <linus.walleij at linaro.org>
---
 drivers/serial/serial_pl01x.c |   10 ++++++++++
 1 files changed, 10 insertions(+), 0 deletions(-)

diff --git a/drivers/serial/serial_pl01x.c b/drivers/serial/serial_pl01x.c
index 7a064ff..ed581ae 100644
--- a/drivers/serial/serial_pl01x.c
+++ b/drivers/serial/serial_pl01x.c
@@ -194,7 +194,17 @@ int serial_tstc (void)
 
 void serial_setbrg (void)
 {
+	struct pl01x_regs *regs = pl01x_get_regs(CONSOLE_PORT);
+
 	baudrate = gd->baudrate;
+	/*
+	 * Flush FIFO and wait for non-busy before changing baudrate to avoid
+	 * crap in console
+	 */
+	while (!(readl(&regs->fr) & UART_PL01x_FR_TXFE))
+		WATCHDOG_RESET();
+	while (readl(&regs->fr) & UART_PL01x_FR_BUSY)
+		WATCHDOG_RESET();
 	serial_init();
 }
 
-- 
1.7.6.2