[U-Boot] [PATCH] powerpc/mpc8536ds: Save the env variables to SDcard and SPI flash

York Sun yorksun at freescale.com
Mon Oct 3 21:54:21 CEST 2011


From: Xie Xiaobo <r63061 at freescale.com>

MPC8536DS offer booting from SDcard or SPI flash.
This patch defined that u-boot can save the environment variables
on SDcard or SPI flash when booting from the related device.
The Env parameter region and linux kernel region have overlap
in SPI-Flash, So change the Env param saving address.

Signed-off-by: Xie Xiaobo <r63061 at freescale.com>
---
 include/configs/MPC8536DS.h |   22 ++++++++++++++++++----
 1 files changed, 18 insertions(+), 4 deletions(-)

diff --git a/include/configs/MPC8536DS.h b/include/configs/MPC8536DS.h
index a98fd19..655f4e6 100644
--- a/include/configs/MPC8536DS.h
+++ b/include/configs/MPC8536DS.h
@@ -649,10 +649,24 @@
 
 #if defined(CONFIG_SYS_RAMBOOT)
 #if defined(CONFIG_RAMBOOT_NAND)
-	#define CONFIG_ENV_IS_IN_NAND	1
-	#define CONFIG_ENV_SIZE		CONFIG_SYS_NAND_BLOCK_SIZE
-	#define CONFIG_ENV_OFFSET ((512 * 1024) + CONFIG_SYS_NAND_BLOCK_SIZE)
-#elif defined(CONFIG_RAMBOOT_SDCARD) || defined(CONFIG_RAMBOOT_SPIFLASH)
+#define CONFIG_ENV_IS_IN_NAND	1
+#define CONFIG_ENV_SIZE		CONFIG_SYS_NAND_BLOCK_SIZE
+#define CONFIG_ENV_OFFSET ((512 * 1024) + CONFIG_SYS_NAND_BLOCK_SIZE)
+#define CONFIG_ENV_RANGE	(3 * CONFIG_ENV_SIZE)
+#elif defined(CONFIG_RAMBOOT_SPIFLASH)
+#define CONFIG_ENV_IS_IN_SPI_FLASH
+#define CONFIG_ENV_SPI_BUS	0
+#define CONFIG_ENV_SPI_CS	0
+#define CONFIG_ENV_SPI_MAX_HZ	10000000
+#define CONFIG_ENV_SPI_MODE	0
+#define CONFIG_ENV_SIZE		0x2000	/* 8KB */
+#define CONFIG_ENV_OFFSET	0xF0000
+#define CONFIG_ENV_SECT_SIZE	0x10000
+#elif defined(CONFIG_RAMBOOT_SDCARD)
+#define CONFIG_ENV_IS_IN_MMC
+#define CONFIG_ENV_SIZE		0x2000
+#define CONFIG_SYS_MMC_ENV_DEV  0
+#else
 	#define CONFIG_ENV_IS_NOWHERE	1	/* Store ENV in memory only */
 	#define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE - 0x1000)
 	#define CONFIG_ENV_SIZE		0x2000
-- 
1.7.0.4




More information about the U-Boot mailing list