[U-Boot] [PATCH] omap: spl: fix build break due to changes in FAT

Aneesh V aneesh at ti.com
Tue Oct 4 17:11:06 CEST 2011


From: a0393566local (none) <a0393566local at ula0393566>

FAT library now uses malloc() and free(). But SPL doesn't
have heap until now. Setup a heap in SDRAM to fix this issue.

However this increases SPL footprint beyond the available SRAM
budget. So, compile out some fancy features in the SDARM init
bring back footprint under control

CC: Sandeep Paulraj <s-paulraj at ti.com>
CC: Wolfgang Denk <wd at denx.de>
Signed-off-by: Aneesh V <aneesh at ti.com>
---
---
 arch/arm/cpu/armv7/omap-common/spl.c |    4 ++++
 common/Makefile                      |    2 +-
 include/configs/omap4_common.h       |   19 +++++++++++--------
 3 files changed, 16 insertions(+), 9 deletions(-)

diff --git a/arch/arm/cpu/armv7/omap-common/spl.c b/arch/arm/cpu/armv7/omap-common/spl.c
index c76fea6..46a1413 100644
--- a/arch/arm/cpu/armv7/omap-common/spl.c
+++ b/arch/arm/cpu/armv7/omap-common/spl.c
@@ -35,6 +35,7 @@
 #include <asm/arch/mmc_host_def.h>
 #include <i2c.h>
 #include <image.h>
+#include <malloc.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -106,6 +107,9 @@ void board_init_r(gd_t *id, ulong dummy)
 	u32 boot_device;
 	debug(">>spl:board_init_r()\n");
 
+	mem_malloc_init(CONFIG_SYS_SPL_MALLOC_START,
+			CONFIG_SYS_SPL_MALLOC_SIZE);
+
 	timer_init();
 	i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
 
diff --git a/common/Makefile b/common/Makefile
index 2edbd71..b424beb 100644
--- a/common/Makefile
+++ b/common/Makefile
@@ -29,7 +29,6 @@ LIB	= $(obj)libcommon.o
 ifndef CONFIG_SPL_BUILD
 COBJS-y += main.o
 COBJS-y += command.o
-COBJS-y += dlmalloc.o
 COBJS-y += exports.o
 COBJS-$(CONFIG_SYS_HUSH_PARSER) += hush.o
 COBJS-y += image.o
@@ -176,6 +175,7 @@ COBJS-$(CONFIG_USB_KEYBOARD) += usb_kbd.o
 endif
 
 COBJS-y += console.o
+COBJS-y += dlmalloc.o
 COBJS-y += memsize.o
 COBJS-y += stdio.o
 
diff --git a/include/configs/omap4_common.h b/include/configs/omap4_common.h
index 228eac5..f438fc2 100644
--- a/include/configs/omap4_common.h
+++ b/include/configs/omap4_common.h
@@ -238,6 +238,7 @@
 #endif
 
 /* Defines for SDRAM init */
+#define CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS
 #ifndef CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS
 #define CONFIG_SYS_AUTOMATIC_SDRAM_DETECTION
 #define CONFIG_SYS_DEFAULT_LPDDR2_TIMINGS
@@ -251,6 +252,16 @@
 
 #define CONFIG_SPL_BSS_START_ADDR	0x80000000
 #define CONFIG_SPL_BSS_MAX_SIZE		0x80000		/* 512 KB */
+/*
+ * 1MB into the SDRAM to allow for SPL's bss at the beginning of SDRAM
+ * 64 bytes before this address should be set aside for u-boot.img's
+ * header. That is 0x800FFFC0--0x80100000 should not be used for any
+ * other needs.
+ */
+#define CONFIG_SYS_TEXT_BASE		0x80100000
+#define CONFIG_SYS_SPL_MALLOC_START	0x80200000
+#define CONFIG_SYS_SPL_MALLOC_SIZE	0x100000	/* 1 MB */
+
 
 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR	0x300 /* address 0x60000 */
 #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS	0x200 /* 256 KB */
@@ -266,12 +277,4 @@
 #define CONFIG_SPL_SERIAL_SUPPORT
 #define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/armv7/omap-common/u-boot-spl.lds"
 
-/*
- * 1MB into the SDRAM to allow for SPL's bss at the beginning of SDRAM
- * 64 bytes before this address should be set aside for u-boot.img's
- * header. That is 0x800FFFC0--0x80100000 should not be used for any
- * other needs.
- */
-#define CONFIG_SYS_TEXT_BASE		0x80100000
-
 #endif /* __CONFIG_OMAP4_COMMON_H */
-- 
1.7.1



More information about the U-Boot mailing list