[U-Boot] [PATCH][V3] drivers: add the support for Silicon Image SATA controller

[Wolfgang Denk]

Dear b29983 at freescale.com,

In message <1314686076-11776-1-git-send-email-b29983 at freescale.com> you wrote:
> From: Tang Yuantian <B29983 at freescale.com>
> 
> Add the Silicon Image series PCI Express to
> Serial ATA controller support, including Sil3132,
> Sil3131 and Sil3124.
> The SATA controller can be used to load kernel.
> 
> The features list:
> 	- Supports 1-lane 2.5 Gbit/s PCI Express
> 	- Supports one/two/four independent Serial ATA channels
> 	- Supports Serial ATA Generation 2 transfer rate of 3.0 Gbit/s
> 	- Supports LBA28 and LBA48
> 
> Signed-off-by: Tang Yuantian <b29983 at freescale.com>
> Signed-off-by: Aaron Williams <Aaron.Williams at cavium.com>
> Tested-by: Lan Chunhe <b25806 at freescale.com>
> ---
> git tree: git://git.denx.de/u-boot.git
> branch: master
> Test platform:P1022DS, P4080DS
> V3: 
> 	- remove __IOMEM
> 	- remove force cast
> V2:
> 	- add virt_to_bus to translate address
> 	- fix some issues
> 
>  drivers/block/Makefile   |    1 +
>  drivers/block/sata_sil.c |  723 ++++++++++++++++++++++++++++++++++++++++++++++
>  drivers/block/sata_sil.h |  227 +++++++++++++++
>  include/pci_ids.h        |    5 +
>  4 files changed, 956 insertions(+), 0 deletions(-)
>  create mode 100644 drivers/block/sata_sil.c
>  create mode 100644 drivers/block/sata_sil.h

Checkpatch says:

total: 0 errors, 2 warnings, 965 lines checked

Please clean up and resubmit.  Thanks.

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
The face of war has never changed.  Surely it is more logical to heal
than to kill.
	-- Surak of Vulcan, "The Savage Curtain", stardate 5906.5