[U-Boot] [PATCH 07/13] MX35: mx35pdk: use new pmic driver

[Stefano Babic]

Switch to new pmic generic driver.

Signed-off-by: Stefano Babic <sbabic at denx.de>
---
 board/freescale/mx35pdk/mx35pdk.c |   18 ++++++++++++------
 include/configs/mx35pdk.h         |    5 +++--
 2 files changed, 15 insertions(+), 8 deletions(-)

diff --git a/board/freescale/mx35pdk/mx35pdk.c b/board/freescale/mx35pdk/mx35pdk.c
index 9eefe5e..f6da51a 100644
--- a/board/freescale/mx35pdk/mx35pdk.c
+++ b/board/freescale/mx35pdk/mx35pdk.c
@@ -30,6 +30,7 @@
 #include <asm/arch/mx35_pins.h>
 #include <asm/arch/iomux.h>
 #include <i2c.h>
+#include <pmic.h>
 #include <fsl_pmic.h>
 #include <mc9sdz60.h>
 #include <mc13892.h>
@@ -204,9 +205,10 @@ int board_init(void)
 
 static inline int pmic_detect(void)
 {
-	int id;
+	unsigned int id;
+	struct pmic *p = get_pmic();
 
-	id = pmic_reg_read(REG_IDENTIFICATION);
+	pmic_reg_read(p, REG_IDENTIFICATION, &id);
 
 	id = (id >> 6) & 0x7;
 	if (id == 0x7)
@@ -227,15 +229,19 @@ int board_late_init(void)
 {
 	u8 val;
 	u32 pmic_val;
+	struct pmic *p;
 
+	pmic_init();
 	if (pmic_detect()) {
+		p = get_pmic();
 		mxc_request_iomux(MX35_PIN_WATCHDOG_RST, MUX_CONFIG_SION |
 					MUX_CONFIG_ALT1);
 
-		pmic_val = pmic_reg_read(REG_SETTING_0);
-		pmic_reg_write(REG_SETTING_0, pmic_val | VO_1_30V | VO_1_50V);
-		pmic_val = pmic_reg_read(REG_MODE_0);
-		pmic_reg_write(REG_MODE_0, pmic_val | VGEN3EN);
+		pmic_reg_read(p, REG_SETTING_0, &pmic_val);
+		pmic_reg_write(p, REG_SETTING_0,
+			pmic_val | VO_1_30V | VO_1_50V);
+		pmic_reg_read(p, REG_MODE_0, &pmic_val);
+		pmic_reg_write(p, REG_MODE_0, pmic_val | VGEN3EN);
 
 		mxc_request_iomux(MX35_PIN_COMPARE, MUX_CONFIG_GPIO);
 		mxc_iomux_set_input(MUX_IN_GPIO1_IN_5, INPUT_CTL_PATH0);
diff --git a/include/configs/mx35pdk.h b/include/configs/mx35pdk.h
index 4e9022d..946e64b 100644
--- a/include/configs/mx35pdk.h
+++ b/include/configs/mx35pdk.h
@@ -69,8 +69,9 @@
 /*
  * PMIC Configs
  */
-#define CONFIG_FSL_PMIC
-#define CONFIG_FSL_PMIC_I2C
+#define CONFIG_PMIC
+#define CONFIG_PMIC_I2C
+#define CONFIG_PMIC_FSL
 #define CONFIG_SYS_FSL_PMIC_I2C_ADDR	0x08
 
 /*
-- 
1.7.1