[U-Boot] u-boot not working on Atmel ATNGW100 (AVR32)

[Andreas Bießmann]

Dear Sven,

Am 11.10.2011 15:28, schrieb Andreas Bießmann:
> Dear Sven,
> 
> Am Di 11 Okt 2011 15:23:00 CEST schrieb Andreas Bießmann:
>> Dear Sven,
>>
>> Am 11.10.2011 15:06, schrieb Sven Schnelle:

>> One thing, we had much truble with our toolchain. Which toolchain do you
>> use? Could you provide me (off list) a u-boot.bin for atstk1002 or
>> grasshopper?

> i've just build a version for grasshopper:

> Sven

Built with my toolchain:

---8<---
U-Boot 2011.09-00253-gac77ce1 (Oct 11 2011 - 15:57:07)

U-Boot code: 00000000 -> 000110ac  data: 000177b0 -> 0001e7e0
VMR table @ 0x13ff9170
DMA: Using memory from 0x13f9d000 to 0x13fa1000
Flash: 8 MiB at address 0x00000000
DRAM Configuration:
Bank #0: 10000000 64 MiB
In:    serial
Out:   serial
Err:   serial
Net:   macb0
Press SPACE to abort autoboot in 1000 seconds
U-Boot>
--->8---

Your u-boot.bin

---8<---
U-Boot 2011.09-00251-gf530e92 (Oct 11 2011 - 15:38:39)

U-Boot code: 00000000 -> 00013a70  data: 0001b420 -> 0004fe40
VMR table @ 0x0001bd94

--->8---

As you can see, your u-boot.bin is not working here.
I suspect some toolchain problem on your side.

best regards

Andreas Bießmann